Stereospecific interactions of proline residues in protein structures and complexes

The constrained backbone torsion angle of a proline (Pro) residue has usually been invoked to explain its three-dimensional context in proteins. Here we show that specific interactions involving the pyrrolidine ring atoms also contribute to its location in a given secondary structure and its binding to another molecule. It is adept at participating in two rather non-conventional interactions, C-H...pi and C-H...O. The geometry of interaction between the pyrrolidine and aromatic rings, vis-à-vis the occurrence of the C-H...pi interactions has been elucidated. Some of the secondary structural elements stabilized by Pro-aromatic interactions are beta-turns, where a Pro can interact with an adjacent aromatic residue, and in antiparallel beta-sheet, where a Pro in an edge strand can interact with an aromatic residue in the adjacent strand at a non-hydrogen-bonded site. The C-H groups at the Calpha and Cdelta positions can form strong C-H...O interactions (as seen from the clustering of points) and such interactions involving a Pro residue at C' position relative to an alpha-helix can cap the hydrogen bond forming potentials of the free carbonyl groups at the helix C terminus. Functionally important Pro residues occurring at the binding site of a protein almost invariably engage aromatic residues (with one of them being held by C-H...pi interaction) from the partner molecule in the complex, and such aromatic residues are highly conserved during evolution.     

Conformation of peptides constructed from achiral amino acid residues Aib and DeltaZPhe: computational study of the effect of L/D- Leu at terminal positions

Conformational studies of the peptides constructed from achiral amino acid residues Aib and Delta(Z)Phe (I) Ac-Aib-Delta(Z)Phe-NHMe (II), and Ac-(Aib-Delta(Z)Phe)(3)-NHMe; peptides III-VI having L-Leu or D-Leu at either the N- or the C-terminal position and of peptides VII-X having Leu residues in different enantiomeric combinations at both the N- and the C-terminal positions in peptide II have been studied to design the peptide with the required helical sense. Peptide II, as expected, adopts degenerate left- and right-handed helical structures. It has been shown that the peptides IV and VI having D-Leu at either the N or the C terminus can be realized in the right-handed helical structure with the phi,psi values of -20 degrees and -60 degrees for the Aib/Delta(Z)Phe residues. L-Leu and D- Leu at both the terminals in peptides VII and VIII, respectively, have hardly any effect as both the left- and the right-handed structures are found to be degenerate. Peptides III and IX can be realized in right- and left-handed helical structures, respectively, in solvents of low polarity whereas peptides V and X are predicted to be in the right-handed helical structures stabilized by carbonyl-carbonyl interactions without the formation of hydrogen bonds. The conformational states with the phi,psi values of 0 degrees and -85 degrees in peptide V are characterized by rise per residue of 2.03 A, rotation per residue of 117.5 degrees , and 3.06 residues per turn. In all peptides having Leu residue at the N terminus, the methyl moiety of the acetyl group is involved in the CH/pi interactions with the Cepsilon--Cdelta edge of the aromatic ring of Delta(Z)Phe (3) and the amino group NH of Delta(Z)Phe is involved in the NH/pi interactions with its own aromatic ring. The CH(3) groups of the Aib residues are also involved in CH/pi interactions with the i + 1th and i + 3th Delta(Z)Phe's aromatic side chains.     

Helix packing motif common to the crystal structures of two undecapeptides containing dehydrophenylalanine residues: implications for the de novo design of helical bundle super secondary structural modules

De novo designed peptide based super secondary structures are expected to provide scaffolds for the incorporation of functional sites as in proteins. Self-association of peptide helices of similar screw sense, mediated by weak interactions, has been probed by the crystal structure determination of two closely related peptides: Ac-Gly1-Ala2-Delta Phe3-Leu4-Val5-DeltaPhe6-Leu7-Val8-DeltaPhe9-Ala10-Gly11-NH2 (I) and Ac-Gly1-Ala2-DeltaPhe3-Leu4-Ala5-DeltaPhe6-Leu7-Ala8-DeltaPhe9-Ala10-Gly11-NH2 (II). The crystal structures determined to atomic resolution and refined to R factors 8.12 and 4.01%, respectively, reveal right-handed 3(10)-helical conformations for both peptides. CD has also revealed the preferential formation of right-handed 3(10)-helical conformations for both molecules. Our aim was to critically analyze the packing of the helices in the solid state with a view to elicit clues for the design of super secondary structural motifs such as two, three, and four helical bundles based on helix-helix interactions. An important finding is that a packing motif could be identified common to both the structures, in which a given peptide helix is surrounded by six other helices reminiscent of transmembrane seven helical bundles. The outer helices are oriented either parallel or antiparallel to the central helix. The helices interact laterally through a combination of N--H...O, C--H...O, and C--H...pi hydrogen bonds. Layers of interacting leucine residues are seen in both peptide crystal structures. The packing of the peptide helices in the solid state appears to provide valuable leads for the design of super secondary structural modules such as two, three, or four helix bundles by connecting adjacent antiparallel helices through suitable linkers such as tetraglycine segments.     

Design of peptides with alpha,beta-dehydro-residues: synthesis, and crystal and molecular structure of a 3(10)-helical tetrapeptide Boc-L-Val-deltaPhe-deltaPhe-L-Ile-OCH3.

The peptide Boc-L-Val-deltaPhe-deltaPhe-L-Ile-OCH3 was synthesized using the azlactone method in the solution phase, and its crystal and molecular structures were determined by X-ray diffraction. Single crystals were grown by slow evaporation from solution in methanol at 25 degrees C. The crystals belong to an orthorhombic space group P2(1)2(1)2(1) with a = 12.882(7) A, b = 15.430(5) A, c = 18.330(5) A and Z = 4. The structure was determined by direct methods and refined by a least-squares procedure to an R-value of 0.073. The peptide adopts a right-handed 3(10)-helical conformation with backbone torsion angles: phi1 = 56.0(6)degrees, psi1 = -38.0(6)degrees, phi2 = -53.8(6)degrees, psi2 = 23.6(6)degrees, phi3 = -82.9(6)degrees, psi3 = -10.6(7)degrees, phi4 = 124.9(5)degrees. All the peptide bonds are trans. The conformation is stabilized by intramolecular 4-->1 hydrogen bonds involving Boc carbonyl oxygen and NH of deltaPhe3 and CO of Val1 and NH of Ile4. It is noteworthy that the two other chemically very similar peptides: Boc-Val-deltaPhe-deltaPhe-Ala-OCH3 (i) and Boc-Val-deltaPhe-deltaPhe-Val-OCH3 (ii) with differences only at the fourth position have been found to adopt folded conformations with two overlapping beta-turns of types II and III', respectively, whereas the present peptide adopts two overlapping beta-turns of type III. Thus the introduction of Ile at fourth position in a sequence Val-deltaPhe-deltaPhe-X results in the formation of a 3(10)-helix. The crystal structure is stabilized by intermolecular hydrogen bonds involving NH of Val1 and carbonyl oxygen of a symmetry related (-x, y - 1/2, 1/2 + z) deltaPhe2 and NH of deltaPhe2 with carbonyl oxygen of a symmetry related (x, y1/2, 1/2 + z) Ile4. This gives rise to long columns of helical molecules linked head to tail running along [010] direction.     

Entrapping unusual folding characteristics of the beta-Ala residues in a model peptide: Boc-beta-Ala-Aib-beta-Ala-NHCH3.

Crystal structure analysis of a model peptide: Boc-beta-Ala-Aib-beta-Ala-NHCH3 (beta-Ala: 3-amino propionic acid; Aib: alpha-aminoisobutyric acid) revealed distinct conformational preferences for folded [phi approximately 136 degrees, mu approximately -62 degrees, psi approximately 100 degrees] and semifolded [phi approximately 83 degrees, mu approximately -177 degrees, psi approximately -117 degrees] structures of the N-and C-terminus beta-Ala residues, respectively. The overall folded conformation is stabilized by unusual Ni...H-Ni+1 and nonconventional C-H...O intramolecular hydrogen bonding interactions.     

Tryptophan-containing peptide helices: interactions involving the indole side chain.

Two designed peptide sequences containing Trp residues at positions i and i + 5 (Boc-Leu-Trp-Val-Ala-Aib-Leu-Trp-Val-OMe, 1) as well as i and i + 6 (Boc-Leu-Trp-Val-Aib-Ala-Aib-Leu-Trp-Val-OMe, 2) containing one and two centrally positioned Aib residues, respectively, for helix nucleation, have been shown to form stable helices in chloroform solutions. Structures derived from nuclear magnetic resonance (NMR) data reveal six and seven intramolecularly hydrogen-bonded NH groups in peptides 1 and 2, respectively. The helical conformation of octapeptide 1 has also been established in the solid state by X-ray diffraction. The crystal structure reveals an interesting packing motif in which helical columns are stabilized by side chain-backbone hydrogen bonding involving the indole Nepsilon1H of Trp(2) as donor, and an acceptor C=O group from Leu(6) of a neighboring molecule. Helical columns also associate laterally, and strong interactions are observed between the Trp(2) and Trp(7) residues on neighboring molecules. The edge-to-face aromatic interactions between the indoles suggest a potential C-H...pi interaction involving the Czeta3H of Trp(2). Concentration dependence of NMR chemical shifts provides evidence for peptide association in solution involving the Trp(2) Nepsilon1H protons, presumably in a manner similar to that observed in the crystal.     

Stabilization of a novel beta-turn-like motif by nonconventional intramolecular hydrogen-bonding interactions in a model peptide incorporating beta-alanine

The chemical synthesis and x-ray crystal structure analysis of a model peptide incorporating a conformationally adaptable unsubstituted beta-Ala residue: Boc-beta-Ala-Acc6-OCH3 (C16H28N2O5, molecular weight = 328.41; 1) has been described. The peptide crystallized in the space group P2(1)2(1)2(1) a = 8.537 (3), b = 8.872 (10), c = 25.327 (8), alpha = beta = gamma = 90.0 degrees, Z = 4. An attractive feature of the crystal structure analysis of 1 is an accommodation of a significantly folded beta-Ala residue in a short linear peptide. The overall peptide conformation is typically folded into a beta-turn-like motif. The stabilization of the peptide backbone conformation by nonconventional C-H...O weak intramolecular hydrogen-bonding interactions, involving the ester terminal carbon atom and the ethereal oxygen of the Boc group, has been evoked. The conformational constraint that seems most apparent is the phi, psi value of the highly constrained hydrophobic Acc6 ring that may play a key role in inducing or sustaining the observed pseudo type III or III' beta-turn structure. The resulting 12-membered hydrogen bonding ring motif in 1 is distinctly different from the one found in classical beta-turn structures, stabilized by a conventional strong C=O...H-N intramolecular hydrogen bond, comprised of alpha-amino acids. The potential of the conformationally adaptable beta-Ala residue to occupy i + 1 position (left corner) of the folded beta-turn-like structure and to design and construct novel secondary structural features have been emphasized.     

A neutral molecule in a cation-binding site: specific binding of a PEG-SH to acetylcholinesterase from Torpedo californica

The crystal structure of acetylcholinesterase from Torpedo californica complexed with the uncharged inhibitor, PEG-SH-350 (containing mainly heptameric polyethylene glycol with a terminal thiol group) is determined at 2.3 A resolution. This is an untypical acetylcholinesterase inhibitor, since it lacks the cationic moiety typical of the substrate (acetylcholine). In the crystal structure, the elongated ligand extends along the whole of the deep and narrow active-site gorge, with the terminal thiol group bound near the bottom, close to the catalytic site. Unexpectedly, the cation-binding site (formed by the faces of aromatic side-chains) is occupied by CH(2) groups of the inhibitor, which are engaged in C-H...pi interactions that structurally mimic the cation-pi interactions made by the choline moiety of acetylcholine. In addition, the PEG-SH molecule makes numerous other weak but specific interactions of the C-H...O and C-H...pi types.     

Geometry of interaction of the histidine ring with other planar and basic residues

Among the aromatic residues in protein structures, histidine (His) is unique, as it can exist in the neutral or positively charged form at the physiological pH. As such, it can interact with other aromatic residues as well as form hydrogen bonds with polar and charged (both negative and positive) residues. We have analyzed the geometry of interaction of His residues with nine other planar side chains containing aromatic (residues Phe, Tyr, Trp, and His), carboxylate (Asp and Glu), carboxamide (Asn and Gln) and guanidinium (Arg) groups in 432 polypeptide chains. With the exception of the aspartic (Asp) and glutamic (Glu) acid side-chains, all other residues prefer to interact in a face-to-face or offset-face-stacked orientation with the His ring. Such a geometry is different from the edge-to-face relative orientation normally associated with the aromatic-aromatic interaction. His-His pair prefers to interact in a face-to-face orientation; however, when both the residues bind the same metal ion, the interplanar angle is close to 90 degrees. The occurrence of different interactions (including the nonconventional N-H...pi and C-H...pi hydrogen bonds) have been correlated with the relative orientations between the interacting residues. Several structural motifs, mostly involved in binding metal ions, have been identified by considering the cases where His residues are in contact with four other planar moieties. About 10% of His residues used here are also found in sequence patterns in PROSITE database. There are examples of the amino end of the Lys side chain interacting with His residues in such a way that it is located on an arc around a ring nitrogen atom.     

Aromatic-aromatic interactions in and around alpha-helices

To understand the role of aromatic-aromatic interactions in imparting specificity to the folding process, the geometries of four aromatic residues with different sequence spacing, located in alpha-helices or five residues from helical ends, interacting with each other have been elucidated. The geometry is found to depend on the sequence difference. Specific interactions (C-H...pi and N-H...pi) which result from this geometry may cause a given pair of residues (such as Phe-His) with a particular sequence difference to occur more than expected. The most conspicuous residue in an aromatic pair in the context of helix stability is His, which is found at the last (C1) position or the two positions (Ncap and Ccap) immediately flanking the helix. An alpha-helix and a contiguous 3(10)-helix or two helices separated by a non-helical residue can have interacting aromatic pairs, the geometry of interaction and the relative orientation between the helices being rather fixed. Short helices can also have interacting residues from either side.     

Comparison of energy-minimized structures of [Pd(II)(N-methyliminodiacetate)] complexes of X(1)-His-X(3)-His-His peptides as an analysis of steric and specific interactions with synthetic binding tags for IMAC separations

[Pd(II)(mida)(peptide)] complexes for the series of peptides of sequence X(1)-His-X(3)-His-His were studied by molecular mechanics methods using Spartan, MMFF94, and SYBYL programs with X(1) = X(3) = glycine (G), phenylalanine (F), tyrosine (Y), tryptophan (W), and with X(1) = glycine (G) and X(3) = proline (P). For comparison purposes, data were also obtained for the Ser-Pro-His-His-Gly (SPHHG) and the (His)(5) peptides.The latter two peptides and GHPHH are tags in current use for IMAC separations. These provide calibration points as to the binding affinities that have been determined for the entire series. The energies of the complexes, as an average trend found from the composite behavior of the three methods, were found to be SPHHG (205 kcal/mol) (most stable; are values obtained by MMFF94 methods) < HH(#)HH(#)H(#) (222; where # implies the site of attachment to match the other X(1)-His-X(3)-His-His peptides) < YHYHH (249) < GHGHH (265) < WHWHH (284) approximately GHPHH (286) < FHFHH (311) (least stable), implying that FHFHH might be a useful chromatographic tag for IMAC protein separations that would elute more readily than GHPHH from IMAC sites that are of square-planar structure, such as Cu(II)(ida-supported) IMAC columns. Specific H-bonded interactions are observed between the tyrosine X(1) and pendant carboxylates and between X(3) and the N-terminal amine of [Pd(mida)(YHYHH)]. Face-to-pi-face ring stacking occurs between phenylalanine X(1) and X(3) units in [Pd(mida)(FHFHH)], whereas edge C-H to pi H-bonding or pi stacking occurs between the X(1) and X(3) tryptophans of [Pd(mida)(WHWHH)]. Two energy minima were found with tryptophan. The more stable form has the aromatic rings more parallel, similar to the stacked form of phenylalanine, rather than the edge C-H to pi H-bonding, and virtually the same overall energy as for [Pd(mida)(GHPHH)]. The "perpendicular" structure was found as an initial local energy minimum, but additional MMFF94 calculations found the pi -stacked arrangement at energy ca. 39 kcal/mol lower than that of the nearly "perpendicular" arrangement of the tryptophan rings, a composite effect of relaxation of the peptide, together with differences in stabilities imparted by the differing geometries. The use of the terms "pi-stacked " and "perpendicular" forms represent the limiting cases available to the tryptophan side chain groups. A twist of about 15 degrees to 20 degrees in dihedral angle is all that is necessary to change between structures that are nearly described as one form or the other.     

Conformational study of peptides containing dehydrophenylalanine: helical structures without hydrogen bond

The conformational behaviour of deltaZPhe has been investigated in the model dipeptide Ac-deltaZPhe-NHMe and in the model tripeptides Ac-X-deltaZPhe-NHMe with X=Gly,Ala,Val,Leu,Abu,Aib and Phe and is found to be quite different. In the model tripeptides with X=Ala,Val,Leu,Abu,Phe the most stable structure corresponds to phi1=-30 degrees, psi1=120 degrees and phi2=psi2=30 degrees. This structure is stabilized by the hydrogen bond formation between C=O of acetyl group and the NH of the amide group, resulting in the formation of a 10-membered ring but not a 3(10) helical structure. In the peptides Ac-Aib-deltaZPhe-NHMe and Ac-(Aib-deltaZPhe)3-NHMe, the helical conformers with phi = +/-30 degrees, psi = +/-60 degrees for Aib residue and phi=psi= +/-30 degrees for deltaZPhe are predicted to be most stable. The computational studies for the positional preferences of deltaZPhe residue in the peptide containing one deltaZPhe and nine Ala residues reveal the formation of a 3(10) helical structure in all the cases with terminal preferences for deltaZPhe. The conformational behaviour of Ac-(deltaZPhe)n-NHMe with n< or =4 is predicted to be very labile. With n > 4, degenerate conformational states with phi,psi values of 0 degrees +/- 90 degrees adopt helical structures which are stabilized by carbonyl-carbonyl interactions and the N-H-pi interactions between the amino group of every deltaZPhe residue with one C-C edge of its own phenyl ring. The results are in agreement with the experimental finding that screw sense of helix for peptides containing deltaZPhe residues is ambiguous in solution. The helical structures stabilized by hydrogen bond formation are found to be at least 3kCalmol(-1) less stable. Conformational studies have also been carried out for the peptide Ac-(deltaEPhe)6-NHMe and the peptide Ac-deltaAla-(deltaZPhe)6-NHMe containing deltaAla residue at the N-terminal. The N-H-pi interactions are absent in peptide Ac-(deltaEPhe)6-NHMe.     

The crystal structure of 1,2,3,4,6-penta-O-benzoyl-alpha-D-mannopyranose: observation of C-H...pi interaction as a surrogate to O-H...O interaction of a free sugar

The crystal structure of the title compound was determined by X-ray crystallography. The compound crystallized in the orthorhombic space group P2(1)2(1)2(1) with four molecules in the unit cell with a=9.170(2), b=9.873 (2), c=38.831(8) A. The structure was refined to a R index of 0.041 for 7907 independent reflections. The mannopyranose unit adopts a distorted 4C1 conformation. The structure depicts unique network of C-H...pi interactions, very closely resembling the pattern of O-H...O interactions in free sugars. This intriguing and rare observation points to a notion that the supramolecular organization pertaining to a sugar is in-built in the pyranose ring itself.     

Conformational investigations on analogs of inflammation response inducing chemotactic tripeptide fMLP

Conformations of three analogs of for-L-Met-L-Leu-L-Phe-OH (fMLP), which initiates inflammatory response by interaction with the formyl peptide receptor (FPR), have been investigated by the application of the X-ray crystallographic technique. The investigated analogs of fMLP peptides are as follows: for-L-Met-1-amino-1-cyclooctane-carbonyl(Ac8c)-L-Phe-OMe; for-L-Met-L-Leu-L-p-iodo-Phe-OH; and for-L-Met-di-n-propylglycyl(Dpg)-L-Phe-OMe. The peptide backbone in and is constrained at position of fMLP by the introduction of Calpha,alpha-disubstituted glycines. In peptide, Phe-OMe is substituted by p-iodo-Phe-OH. Crystal structures reveal an overall folded conformation adopted by and. The former is folded in the type II beta-turn, which is stabilized by an intramolecular 1<--4 (formyl) C==O...H--N (Phe) hydrogen bond, whereas the latter is folded in an open turn without any intramolecular hydrogen bond. On the other hand, peptide has an extended conformation, and two different molecules in a crystallographic asymmetric unit form an antiparallel beta-sheet-like structure. In and, residues Ac8c and Dpg adopt left-handed helical and fully extended (C5) conformations, respectively. The cyclooctane ring in Ac8c acquires a boat-chair conformation. Crystal packing of is characterized by the association of aliphatic-aromatic rings via a C--H...pi interaction. In the crystal of, contrary to the usual observations, peptides are interlinked via networks of head-to-tail hydrogen bond and pi...pi interactions, which are generally observed to be mutually exclusive. The structure-function mechanism of the ligand-receptor interaction is discussed.     

C-H...pi-interactions in proteins

A non-redundant set of 1154 protein structures from the Protein Data Bank was examined with respect to close interactions between C-H-donor and pi-acceptor groups. A total of 31,087 interactions were found to satisfy our selection criteria. Their geometric parameters suggest that these interactions can be classified as weak hydrogen bonds.A set of 12 interaction classes were defined based on the division of the donors into three groups and the acceptors into four groups. These classes were examined separately, and the respective interactions described in detail in each class. Most prominent were interactions between aliphatic C-H donors and aromatic pi-acceptors and interactions between aromatic C-H donors and aromatic pi-acceptors. About three-quarters of the Trp-rings, half of all Phe and Tyr-rings and a quarter of all His-rings were found to be involved as acceptors in C-H...pi-interactions. On the donor side, a preference for aromatic C-H groups was observed, but also for the aliphatic side-chains of the long, extended amino acid residues Lys, Arg and Met, and the Pro ring.The average distance between the C-donor and the center-of-mass of the pi-acceptor was observed to be significantly longer in the 174 protein structures determined at >2.5 A resolution. Also, the distribution is significantly wider. This resolution dependence suggests that the force fields commonly used for the refinement of protein structures may not be adequate. C-H...pi-interactions involving aromatic groups either as donor or as acceptor groups are found mostly in the interior of the protein. The more hydrophilic the participating groups are, the closer to the surface are the interactions located. About 40 % of all C-H...pi-interactions occur between amino acid residue side-chains that are separated by nine or less residues in sequence. Dependent on the interaction class, different preferences for secondary structure, residue type and side-chain conformation were observed.It is likely that the C-H...pi-interactions contribute significantly to the overall stability of a protein.     

Geometry of nonbonded interactions involving planar groups in proteins

Although hydrophobic interaction is the main contributing factor to the stability of the protein fold, the specificity of the folding process depends on many directional interactions. An analysis has been carried out on the geometry of interaction between planar moieties of ten side chains (Phe, Tyr, Trp, His, Arg, Pro, Asp, Glu, Asn and Gln), the aromatic residues and the sulfide planes (of Met and cystine), and the aromatic residues and the peptide planes within the protein tertiary structures available in the Protein Data Bank. The occurrence of hydrogen bonds and other nonconventional interactions such as C-H...pi, C-H...O, electrophile-nucleophile interactions involving the planar moieties has been elucidated. The specific nature of the interactions constraints many of the residue pairs to occur with a fixed sequence difference, maintaining a sequential order, when located in secondary structural elements, such as alpha-helices and beta-turns. The importance of many of these interactions (for example, aromatic residues interacting with Pro or cystine sulfur atom) is revealed by the higher degree of conservation observed for them in protein structures and binding regions. The planar residues are well represented in the active sites, and the geometry of their interactions does not deviate from the general distribution. The geometrical relationship between interacting residues provides valuable insights into the process of protein folding and would be useful for the design of protein molecules and modulation of their binding properties.     

Stereoselective single-step synthesis and X-ray crystallographic investigation of acetylated aryl 1,2-trans glycopyranosides and aryl 1,2-cis C2-hydroxy-glycopyranosides

Reported is an attractive and environmentally friendly method for the synthesis of the title compounds in moderate yield using inexpensive 1,2,3,4,6-penta-O-acetyl-beta-D-gluco- and galactopyranoses as sugar donors, five different phenols as acceptors and H-beta zeolite as the catalyst. The yield (23-28%) of aryl 3,4,6-tri-O-acetyl-alpha-D-glycopyranosides obtained in this single-step procedure is considerably higher than that obtained using previously reported methods. Treatment of an orthoacetate, 3,4,6-tri-O-acetyl-[1,2-O-(1-p-fluorophenoxyethylidene)]-alpha-D-glucopyranose, with p-fluorophenol under the same solvent-free reaction conditions also led to the formation of the title compounds in similar yield and composition. X-ray crystallographic analysis of phenyl 3,4,6-tri-O-acetyl-alpha-D-glucopyranoside and p-fluorophenyl 3,4,6-tri-O-acetyl-alpha-D-glucopyranoside showed that the molecular packing is stabilized by C-H...O, C-H...pi and C-H...F interactions, in addition to regular hydrogen bonding patterns.     

1H-n.m.r. study of the folding of ribonuclease 12-(beta-(3-pyridyl)-L-Ala) S-peptide (1-14)

The 1H-n.m.r. spectra (360 MHz) of 12-(beta-(3-pyridyl)-L-Ala) ribonuclease S-peptide (1-14), a tetradecapeptide incorporating (beta-3-pyridyl-L-Ala) instead of His at position 12, have been assigned. The shift vs. temperature dependence has been analyzed at three different pD's in terms of a two-state helix (3-13) in equilibrium coil equilibrium, and the corresponding values for the thermodynamic quantities delta H degrees and delta S degrees determined. Helix populations at 0 degrees C have been measured as a function of pD, showing their dependence on two apparent pKa's at approximately 3.3 and 5.5, with a maximum at pD approximately 4.2. All the obtained results show that the new peptide has very similar folding properties to those shown by S-peptide and particularly to those of C-peptide. The 3-13 helix formed is stabilized by two interactions: a salt-bridge Glu 2-...Arg 10+ and a partial stacking between the aromatic rings of residues Phe 8 and His 12. Calculations involving ring current shifts and potential energies validate the possible existence of this latter interaction, which must present a local geometry defined by chi 81 180 degrees, chi 82 100 degrees, chi 121-60 and chi 122 80.     

C-H. . .pi interactions in the metal-porphyrin complexes with chelate ring as the H acceptor

Specific C-H. . .pi interactions with the pi-system of porphyrinato chelate ring were found in crystal structures of transition metal complexes from the Cambridge Structural Database and statistical analysis of geometrical parameters for intramolecular and intermolecular interactions was done. By density functional theory calculations on a model system it was evaluated that an interaction energy is above 1.5 kcal/mol and that the strongest interaction occurs when the distance between hydrogen atom and the center of the chelate ring is 2.6 A. This prediction is in good agreement with the distances for intermolecular interactions found in the crystal structures. In many cases the intramolecular interaction distances are much shorter than 2.6 A, and these short distances are caused by geometrical constrains. The C-H. . .pi interactions with chelate ring of porphyrinato ligand can influence the structure, contribute to its stability, and play some role in the function of biomolecules with metalo porphyrins.     

Effect of terminal achiral and chiral residues on the conformational behaviour of poly Δ(z)Phe and analysis of various interactions

Conformational properties of the peptides containing (Δ(Z)Phe)6 with achiral (ΔAla, Gly) and chiral (Ala, Leu) residues at both the N- and C-terminal positions have been studied with a view to design a peptide with desired helical screw sense. In all the peptides, the lowest energy conformational state corresponds to Φ = 0° and Ψ = + 90° or - 90° or both +/- 90°. These structures are characterized by rise per residue of 1.94 ?; rotation per residue of 114° and 3.12 residues per turn and are stabilized by: (i) carbonyl-carbonyl interactions with the carbonyl oxygen of ith residue and carbonyl carbon atom of the carbonyl group of ith+1 residue; and (ii) N-H....π interactions between the amino group of Δ(Z)Phe and its own aromatic moiety. The Ala/Leu residues at the N-terminus further stabilized the structure, through C-H....π interactions with the farthest edge of the aromatic ring of ith+3 Δ(Z)Phe residue. For peptides Ac-L-Ala/L-Leu-(Δ(Z)Phe)6-NHMe, the low energy left handed helical structure (approximately 2.5 Kcalmol?1 higher in energy) state corresponds to Φ = -30°, Ψ = 120° for L-residue and Φ = Ψ = 30° for Δ(Z)Phe residues and is in good agreement with the X-ray crystallography results for the peptide Boc-L-Ala-(Δ(Z)Phe)4-NHMe crystals grown from acetonitrile/ethanol mixture. Computational results suggest that the peptides Ac-DAla/D-Leu-(Δ(Z)Phe)6-NHMe adopt a right handed helical structure in polar solvents with Φ = 30°, Ψ = -120° for D-residues and Φ = Ψ = -30° for Δ(Z)Phe residues. Both in the left handed and right handed structures, the carbonyl oxygen of acetyl group is involved in 10-membered hydrogen bonded ring formation with NH of 3rd Δ(z)Phe residue whereas Δ(Z)Phe residues backbone adopts a 3?? helix structure. Computational results also suggest that the conformational state with Φ = 0° and Ψ = 90° can be realized by keeping D-Ala or D-Leu at the C-terminal. There is hardly any effect of achiral residues Gly/ΔAla on the conformational behaviour of poly-Δ(Z)Phe.