Effect of culture conditions, cytokinins, methyl jasmonate and salicylic acid on the biomass accumulation and production of withanolides in multiple shoot culture of Withania somnifera (L.) Dunal using liquid culture

The influence of cytokinins and culture conditions including medium volume, harvest time and elicitation with abiotic elicitors (SA/MeJ) have been studied for the optimal production of biomass and withanolides in the multiple shoot culture of Withania somnifera. Elicitation of shoot inoculum mass (2 g l^?l FW) with SA at 100 μM in the presence of 0.6 mg l^?l BA and 20 mg l^?l spermidine for 4 h exposure time at the 4th week in 20 ml liquid medium recorded higher withanolides production (withanolides A [8.48 mg g^?l DW], withanolides B [15.47 mg g^?l DW], withaferin A [29.55 mg g^?l DW] and withanone [23.44 mg g^?l DW]), which were 1.14 to 1.18-fold higher than elicitation with MeJ at 100 μM after 5 weeks of culture. SA-elicited cultures did not exhibit much variation in biomass accumulation when compared to control. This cytokinin induces and SA-elicited multiple shoot culture protocol provides a potential alternative for the optimal production of biomass and withanolides utilizing liquid culture.     

Biomass and terpenoids produced by mutant strains of <Emphasis Type="Italic">Arthrospira</Emphasis> under low temperature and light conditions

The filamentous Cyanobacterium Arthrospira is commercially produced and is a functional, high-value, health food. We identified 5 low temperature and low light intensity tolerant strains of Arthrospira sp. (GMPA1, GMPA7, GMPB1, GMPC1, and GMPC3) using ethyl methanesulfonate mutagenesis and low temperature screening. The 5 Arthrospira strains grew rapidly below 14?°C, 43.75 μmol photons m^?2 s^?1 and performed breed conservation at 2.5?°C, 8.75 μmol photons m^?2 s^?1. We used morphological identification and molecular genetic analysis to identify GMPA1, GMPA7, GMPB1 and GMPC1 as Arthrospira platensis, while GMPC3 was identified as Arthrospira maxima. Growth at different culture temperatures was determined at regular intervals using dry biomass. At 16?°C and 43.75 μmol photons m^?2 s^?1, the maximum dry biomass production and the mean dry biomass productivity of GMPA1, GMPB1, and GMPC1 were 2057?±?80 mg l^?1, 68.7?±?2.5 mg l^?1 day^?1, 1839?±?44 mg l^?1, 60.6?±?1.8 mg l^?1 day^?1, and 2113?±?64 mg l^?1, 77.7?±?2.5 mg l^?1 day^?1 respectively. GMPB1 was chosen for additional low temperature tolerance studies and growth temperature preference. In winter, GMPB1 grew well at mean temperatures <10?°C, achieving 3258 mg dry biomass from a starting 68 mg. In summer, GMPB1 grew rapidly at mean temperatures more than 28?°C, achieving 1140 mg l^?1 dry biomass from a starting 240 mg. Phytonutrient analysis of GMPB1 showed high levels of C-phycocyanin and carotenoids. Arthrospira metabolism relates to terpenoids, and the methyl-d-erythritol 4-phosphate pathway is the only terpenoid biosynthetic pathway in Cyanobacteria. The 1-deoxy-d-xylulose 5-phosphate reductoisomerase (DXR) gene from GMPB1 was cloned and phylogenetic analysis showed that GMPB1 is closest to the Cyanobacterium Oscillatoria nigro-viridis PCC711. Low temperature tolerant Arthrospira strains could broaden the areas suitable for cultivation, extend the seasonal cultivation time, and lower production costs.     

Erratum to: Production of isobutanol from crude glycerol by a genetically-engineered Klebsiella pneumoniae strain

Klebsiella pneumoniae was engineered to produce isobutanol from crude glycerol as a sole carbon source by expressing acetolactate synthase (ilvIH), keto-acid reducto-isomerase (ilvC) and dihydroxy-acid dehydratase (ilvD) from K. pneumoniae, and α-ketoisovalerate decarboxylase (kivd) and alcohol dehydrogenase (adhA) from Lactococcus lactis. Engineered K. pneumonia, ?ldhA/pBR-iBO (ilvIH–ilvC–ilvD–kivd–adhA), produced isobutanol (160 mg l^?1) from crude glycerol. To increase the yield of isobutanol, we eliminated the 2,3-butanediol pathway from the recombinant strain by inactivating α-acetolactate decarboxylase (adc). This further engineering step improved the yield of isobutanol from 160 to 320 mg l^?1. This represents the first successful attempt to produce isobutanol from crude glycerol.     

Production of 2-butanol from crude glycerol by a genetically-engineered Klebsiella pneumoniae strain

Klebsiella pneumoniae was engineered to produce 2-butanol from crude glycerol as a sole carbon source by expressing acetolactate synthase (ilvIH), keto-acid reducto-isomerase (ilvC) and dihydroxy-acid dehydratase (ilvD) from K. pneumoniae, and α-ketoisovalerate decarboxylase (kivd) and alcohol dehydrogenase (adhA) from Lactococcus lactis. Engineered K. pneumonia, ?ldhA/pBR-iBO (ilvIH–ilvC–ilvD–kivd–adhA), produced 2-butanol (160 mg l^?1) from crude glycerol. To increase the yield of 2-butanol, we eliminated the 2,3-butanediol pathway from the recombinant strain by inactivating α-acetolactate decarboxylase (adc). This further engineering step improved the yield of 2-butanol from 160 to 320 mg l^?1. This represents the first successful attempt to produce 2-butanol from crude glycerol.     

Culture medium influence on growth,fatty acid,and pigment composition of <Emphasis Type="Italic">Choricystis minor</Emphasis> var. <Emphasis Type="Italic">minor</Emphasis>: a suitable microalga for biodiesel production

The purposes of this study were to assess the influence of culture medium on biomass production, fatty acid, and pigment composition of Choricystis minor var. minor and to evaluate the use of this microalga as a source of fatty raw material for biodiesel production. Cultures of C. minor var. minor were grown using WC (Wright’s cryptophyte) and BBM (Bold’s Basal medium) media. BBM medium produced more biomass (984.3 mg L^?1) compared to the WC medium (525.7 mg L^?1). Despite this result, WC medium produced a higher methyl ester yield for biodiesel production than the BBM medium (170.0 and 90.2 mg g^?1 of biomass, respectively). The average percentage of fatty acids obtained using the WC medium (17.0 %) was similar to soybean (18.0 %) and with similar biomass fatty acid profile. However, for pigment production, carotenoids and chlorophyll concentrations were twice as high when using the BBM medium.     

Withanolide A production from Withania somnifera hairy root cultures with improved growth by altering the concentrations of macro elements and nitrogen source in the medium

Withania somnifera is an important medicinal plant that contains withanolides as bioactive compounds. We have investigated the effects of macroelements and nitrogen source in hairy roots of W. somnifera with the aim of optimizing the production of biomass and withanolide A content. The effects of the macroelements NH₄NO₃, KNO₃, CaCl₂, MgSO₄ and KH₂PO₄ at concentrations of 0, 0.5, 1.0, 1.5 and 2.0× strengths and of nitrogen source [NH₄ ⁺/NO₃ ^? (0.00/18.80, 7.19/18.80, 14.38/18.80, 21.57/18.80, 28.75/18.80, 14.38/0.00, 14.38/9.40, 14.38/18.80, 14.38/28.20 and 14.38/37.60 mM)] in Murashige and Skoog medium were evaluated for biomass and withanolide A production. The highest accumulation of biomass (139.42 g l^?1 FW and 13.11 g l^?1 DW) was recorded in the medium with 2.0× concentration of KH₂PO₄, and the highest production of withanolide A was recorded with 2.0× KNO₃ (15.27 mg g^?1 DW). The NH₄ ⁺/NO₃ ^? ratio also influenced root growth and withanolide A production, with both parameters being larger when the NO₃ ^? concentration was higher than that of NH₄ ⁺. Maximum biomass growth (148.17 g l^?1 FW and 14.79 g l^?1 DW) was achieved at NH₄ ⁺/NO₃ ^? ratio of 14.38/37.60 mM, while withanolide A production was greatest (14.68 mg g^?1 DW) when the NH₄ ⁺/NO₃ ^? ratio was 0.00/18.80 mM. The results are useful for the large scale cultivation of Withania hairy root culture for the production of withanolide A.     

Evaluation of indigenous microalgal isolate Chlorella sp. FC2 IITG as a cell factory for biodiesel production and scale up in outdoor conditions

The present study reports evaluation of an indigenous microalgal isolate Chlorella sp. FC2 IITG as a potential candidate for biodiesel production. Characterization of the strain was performed under photoautotrophic, heterotrophic, and mixotrophic cultivation conditions. Further, an open-pond cultivation of the strain under outdoor conditions was demonstrated to evaluate growth performance and lipid productivity under fluctuating environmental parameters and in the presence of potential contaminants. The key findings were: (1) the difference in cultivation conditions resulted in significant variation in the biomass productivity (73–114 mg l^?1 day^?1) and total lipid productivity (35.02–50.42 mg l^?1 day^?1) of the strain; (2) nitrate and phosphate starvation were found to be the triggers for lipid accumulation in the cell mass; (3) open-pond cultivation of the strain under outdoor conditions resulted in biomass productivity of 44 mg l^?1 day^?1 and total lipid productivity of 10.7 mg l^?1 day^?1; (4) a maximum detectable bacterial contamination of 7 % of the total number of cells was recorded in an open-pond system; and (5) fatty acid profiling revealed abundance of palmitic acid (C16:0), oleic acid (C18:1) and linoleic acid (C18:2), which are considered to be the key elements for suitable quality biodiesel.     

Increased production of plumbagin in <Emphasis Type="Italic">Plumbago indica</Emphasis> root cultures by biotic and abiotic elicitors

Objectives

To evaluate the effects of 12 biotic and abiotic elicitors for increasing the production of plumbagin in Plumbago indica root cultures.

Results

Most elicitors showed minimal effects on the root dry weight, except for 250 mg chitosan l^?1 and 10 mM l-alanine that markedly decreased root biomass by about 40 % compared to the untreated root cultures (5 g l^?1). Treatments with 100 µM AgNO₃ significantly increased intracellular plumbagin production by up to 7.6 mg g^?1 DW that was 4-fold more than the untreated root cultures (1.9 mg g^?1 DW). In contrast, treatments with 150 mg chitosan l^?1, 5 mM l-alanine, and 50 µM 1-naphthol significantly enhanced the extracellular secretion of plumbagin by up to 10.6, 6.9, and 5.7 mg g^?1 DW, respectively, and increased the overall production of plumbagin by up to 12.5, 12.5, and 9.4 mg g^?1 DW, respectively.

Conclusions

Chitosan (150 mg l^?1), l-alanine (5 mM), and 1-naphthol (50 µM) were the best elicitors to enhance plumbagin production in P. indica root cultures.

     

In vitro plantlet regeneration and assessment of alkaloid contents from callus cultures of Ephedra foliata (Unth phog), a source of anti-asthmatic drugs

Ephedra foliata, (Gymnosperm) is a pharmaceutically important plant known for the last 5,000 years and has a number of medicinal properties. We describe here for the first time, a method for plant regeneration from callus established from axillary buds as explant, with the aim of optimizing alkaloids production in vitro. The tissue cultures initiated are being maintained for the last 3 years on Murashige and Skoog (Physiol Plant 15:473–497, 1962) medium containing 0.5 mg l^?1 each of 2, 4-D and Kin. Maintained callus cultures exhibited regeneration potential and maximum number (23.5 ± 0.44 shoots per culture vessel) of shoots with an average height (4.94 ± 0.23 cm) was achieved on MS medium containing combination of 0.25 mg l^?1 each of Kin, BA and 0.1 mg l^?1 of NAA. About 84.9 % regenerated shoots were rooted under ex vitro conditions on Soilrite^®, if their base was treated with 500 mg l^?1 of IBA for 5 min. The rooted plantlets were successfully acclimatized under greenhouse conditions with ≈80 % survival rate. We analyzed alkaloid contents of tissue culture raised plants/callus as affected by the different concentrations and combination of two additives, i.e., l-phenylalanine and IBA. The alkaloid production was higher in the in vitro grown cultures than field-grown plants. Highest alkaloid content was recorded in callus culture on M₅ medium having 0.5 mg l^?1 each of 2, 4-D and Kin, 100 mg l^?1 l-phenylalanine and 5 mg l^?1 IBA. The present protocol may be applicable for the large-scale cultivation of E. foliata and selection of cell line having higher secondary metabolite contents of this pharmaceutically important threatened plant species.     

Plant regeneration via callus culture and subsequent in vitro flowering of Dendrobium huoshanense

A protocol for regenerating and subsequent in vitro flowering of an economical important and endangered medicinal orchid, Dendrobium huoshanense, was established mainly via indirect protocorm-like body (PLB) formation. A four-step method was developed to induce successful plant regeneration on 1/2 MS medium supplemented with suitable plant growth regulators (PGRs). Step 1 (callus induction): the root tip explants (1 cm long) were cultured at 1 mg l^?1 2,4-D + 1 mg l^?1 TDZ for 3 months. Step 2 (callus proliferation): the calli were subcultured with a 1-month interval at 1 mg l^?1 2,4-D + 1 mg l^?1 TDZ. Step 3 (PLB induction): the calli were cultured at 2 mg l^?1 NAA + 1 mg l^?1 BA for 2 months. Step 4 (plantlet conversion): the 2-month-old PLBs were cultured at 0.1 mg l^?1 IBA for 4 months. It took at least 6 months to produce well-rooted regenerated plantlets with an average of 3.2 roots and 3.6 leaves from the initial callus. The 6-month-old rooted plantlets were transferred onto PGR-free 1/2 MS medium for 6 months, and then potted with Sphagnum moss for acclimatization. After 2 month of culture, the survival rate was 100 %. The in vitro flowers were obtained on the 8-month-old plantlets at 1 mg l^?1 IBA, 5 mg l^?1 IBA and 0.1 mg l^?1 NAA, but the flowers showed a lack of the gynandrium. The abnormity was overcome by the aid of 5 mg l^?1 TDZ, and subsequently, the capsules formed without artificial pollination. This protocol provides the basis for further investigation on cell suspension, micropropagation, in vitro flowering and breeding programs in Dendrobium huoshanense.     

In vitro propagation,ex vitro rooting and leaf micromorphology of <Emphasis Type="Italic">Bauhinia racemosa</Emphasis> Lam.: a leguminous tree with medicinal values

A micropropagation system for Bauhinia racemosa Lam. was developed involving axillary shoot proliferation and ex vitro rooting using nodal explants obtained from mature tree. MS medium with 3.0 mg l^?1 BA (6-benzyladenine) was optimum for shoot bud induction. For shoot multiplication, mother explants were transferred repeatedly on medium containing low concentration of BA (0.75 mg l^?1). Number of shoots was increased up to two passages and decreased thereafter. Shoot multiplication was further enhanced on MS medium containing 0.25 mg l^?1 each of BA and Kin (Kinetin) with 0.1 mg l^?1 of NAA (α-naphthalene acetic acid). Addition of 0.004 mg l^?1 TDZ (thidiazuron) increased the rate of shoot multiplication and 21.81 ± 1.26 shoots per culture vessel were obtained. In vitro regenerated shoots were rooted under ex vitro conditions treated with 400 mg l^?1 IBA (indole-3-butyric acid) for 7 min on sterile soilrite. After successful hardening in greenhouse, ex vitro rooted plants were transferred to the field conditions with ≈85% of survival rate. Micromorphological changes were observed on leaf surface i.e. development of vein density and trichomes and stomatal appearance, when plants were subjected to environmental conditions. This is the first report on in vitro regeneration of B. racemosa from mature tree.     

Production of salidroside and polysaccharides in Rhodiola sachalinensis using airlift bioreactor systems

Rhodiola sachalinensis is widely used in traditional Chinese medicine, and salidroside and polysaccharides are its important bioactive compounds. This study used airlift bioreactor systems to produce mass bioactive compounds through callus culture. Several factors affecting callus biomass and bioactive compound accumulation were investigated. Callus growth was vigorous in a bioreactor system, and the growth ratio was 2.8-fold higher in bioreactor culture than in agitated-flask culture. Callus biomass and polysaccharide content were favorable at 0.1 air volume per culture volume per min (vvm), whereas favorable salidroside content was observed at a high air volume (0.2 vvm). The maximum yields of salidroside (7.90 mg l^?1) and polysaccharide (2.87 g l^?1) were obtained at 0.1 vvm. Inoculum density greatly affected callus biomass and bioactive compound accumulation, and the highest biomass and contents or yields of salidroside and polysaccharide were determined at a high inoculum density of 12.5 g l^?1. The level of hydrogen ion concentration (pH) at 5.8 improved callus biomass accumulation. Acidic medium (pH 4.8) stimulated salidroside synthesis but higher pH level (7.8) promoted polysaccharide accumulation. The highest yields of both bioactive compounds were obtained at pH 5.8. Methyl jasmonate (MeJA) participated in synthesis promotion of bioactive compounds, and the contents and yields of salidroside [4.75 mg g^?1 dry weight (DW), 58.43 mg l^?1] and polysaccharides (392.41 mg g^?1 DW, 4.79 g l^?1) were at maximum at 125 and 150 μmol of MeJA. Therefore, bioreactor systems can be used to produce R. sachalinensis bioactive compounds, and callus culture in a bioreactor can be as an alternative method for supplying materials for commercial drug production.     

Laboratory-scale biofiltration of acrylonitrile by <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> DAP 96622 in a trickling bed bioreactor

Acrylonitrile (ACN), a volatile component of the waste generated during the production of acrylamide, also is often associated with aromatic contaminants such as toluene and styrene. Biofiltration, considered an effective technique for the treatment of volatile hydrocarbons, has not been used to treat volatile nitriles. An experimental laboratory-scale trickling bed bioreactor using cells of Rhodococcus rhodochrous DAP 96622 supported on granular activated carbon (GAC) was developed and evaluated to assess the ability of biofiltration to treat ACN. In addition to following the course of treatability of ACN, kinetics of ACN biodegradation during both recycle batch and open modes of operation by immobilized and free cells were evaluated. For fed-batch mode bioreactor with immobilized cells, almost complete ACN removal (>95%) was achieved at a flow rate of 0.1 μl/min ACN and 0.8 μl/min toluene (TOL) (for comparative purposes this is equivalent to 6.9 mg l^?1 h^?1 ACN and 83.52 mg l^?1 h^?1 TOL). In a single-pass mode bioreactor with immobilized cells, at ACN inlet loads of 100–200 mg l^?1 h^?1 and TOL inlet load of ~400 mg l^?1 h^?1, with empty bed retention time (EBRT) of 8 min, ACN removal efficiency was ~90%. The three-dimensional structure and characteristics of the biofilm were investigated using confocal scanning laser microscopy (CSLM). CLSM images revealed a robust and heterogeneous biofilm, with microcolonies interspersed with voids and channels. Analysis of the precise measurement of biofilm characteristics using COMSTAT^® agreed with the assumption that both biomass and biofilm thickness increased along the carbon column depth.     

Establishment of long-term proliferating shoot cultures of elite <Emphasis Type="Italic">Jatropha curcas</Emphasis> L. by controlling endophytic bacterial contamination

Leaf explants of the second or third node were collected from field-grown elite Jatropha curcas trees and incubated in Murashige and Skoog’s (Physiol Plant 15:473–497, 1962) medium supplemented with growth regulators. Direct shoot organogenesis was induced when explants were incubated in a medium containing 0.5 mg l^?1 benzyladenine (BA) and 0.1 mg l^?1 indolebutyric acid (IBA). A maximum of seven shoot buds differentiated within 6 weeks of culture incubation. Indirect shoot organogenesis was obtained when explants were incubated in the medium supplemented with 0.5 mg l^?1 BA along with 1.0 mg l^?1 each of 2,4-dichlorophenoxyacetic acid (2,4-D) and indoleacetic acid (IAA). A pulse treatment of 0.5 mg l^?1 thidiazurone (TDZ) and 0.1 mg l^?1 IBA for 5 days was necessary for shoot organogenesis in green compact callus before subculture into 0.5 mg l^?1 BA and 0.1 mg l^?1 IBA containing medium. Leaf explants of J. curcas, collected from the field, contained endophytic bacterial contamination, which expressed itself after 2–3 subcultures. These bacteria were cultured and identified as Enterobacter ludwigii. After staining, these were found as gram-negative bacteria. Their sensitivity against different antibiotics has been tested by culturing them with different antibiotic stabs for 72 h. Finally, Augmentin® was found as the most effective and suitable antibiotic which not only controlled the bacteria within 2–3 subcultures but also supported the regeneration system and growth of the regenerated shoots and such cultures have been grown for a long-term of over 2 years without any contamination.     

Production of aglycone protopanaxatriol from ginseng root extract using Dictyoglomus turgidum β-glycosidase that specifically hydrolyzes the xylose at the C-6 position and the glucose in protopanaxatriol-type ginsenosides

The hydrolytic activity of a recombinant β-glycosidase from Dictyoglomus turgidum that specifically hydrolyzed the xylose at the C-6 position and the glucose in protopanaxatriol (PPT)-type ginsenosides followed the order Rf > Rg₁ > Re > R₁ > Rh₁ > R₂. The production of aglycone protopanaxatriol (APPT) from ginsenoside Rf was optimal at pH 6.0, 80 °C, 1 mg ml^?1 Rf, and 10.6 U ml^?1 enzyme. Under these conditions, D. turgidum β-glycosidase converted ginsenoside R₁ to APPT with a molar conversion yield of 75.6 % and a productivity of 15 mg l^?1 h^?1 after 24 h by the transformation pathway of R₁ → R₂ → Rh₁ → APPT, whereas the complete conversion of ginsenosides Rf and Rg₁ to APPT was achieved with a productivity of 1,515 mg l^?1 h^?1 after 6.6 h by the pathways of Rf → Rh₁ → APPT and Rg₁ → Rh₁ → APPT, respectively. In addition, D. turgidum β-glycosidase produced 0.54 mg ml^?1 APPT from 2.29 mg ml^?1 PPT-type ginsenosides of Panax ginseng root extract after 24 h, with a molar conversion yield of 43.2 % and a productivity of 23 mg l^?1 h^?1, and 0.62 mg ml^?1 APPT from 1.35 mg ml^?1 PPT-type ginsenosides of Panax notoginseng root extract after 20 h, with a molar conversion yield of 81.2 % and a productivity of 31 mg l^?1 h^?1. This is the first report on the APPT production from ginseng root extract. Moreover, the concentrations, yields, and productivities of APPT achieved in the present study are the highest reported to date.     

Agrobacterium-mediated transformation of Eruca sativa

An Agrobacterium tumefaciens—mediated transformation system was developed for Eruca sativa (eruca). Hypocotyl explants were co-cultivated with bacterial cells carrying a plasmid harboring a uidA:nptII fusion gene along a phosphinothricin acetyl transferase (PAT) gene cassette, for a period of 2 days. These were grown on a high cytokinin/auxin medium containing 5.0 mg l^?1 6-benzyladenine (BA), 1.0 mg l^?1 indole-3-acetic acid (IAA), and 0.1 mg l^?1 α-naphthaleneacetic acid (NAA). Explants were then transferred to a lower cytokinin/auxin medium containing 2.0 mg l^?1 BA and 0.1 mg l^?1 NAA along with 5.0 mg l^?1 silver nitrate and 300 mg l^?1 Timentin®. Upon transfer to a selection medium containing either 20 mg l^?1 kanamycin or 2 mg l^?1 L-phosphinothricin (L-ppt), shoot regenerants were observed. Expression of the transgenes in putative transformants was confirmed using a histochemical GUS assay. Presence of the PAT transgene in GUS-positive T0 plants was confirmed by Southern blot analysis. Moreover, spot tests of T1 seedlings were conducted using the L-ppt herbicide. A transformation frequency of 1.1% was obtained with more than 60% of transgenic lines containing single copies of the transgenes.     

Plant growth regulators affect biosynthesis and accumulation profile of isoflavone phytoestrogens in high-productive in vitro cultures of Genista tinctoria

The influence of plant growth regulators on biomass growth and the accumulation of medicinally-relevant isoflavone phytoestrogens, derivatives of genistein and daidzein (8 compounds including aglycones, glucosides and glucoside esters) in callus cultures of Genista tinctoria (Fabaceae) was examined. The experiments included 10 auxins [2,4-dichlorophenoxyacetic acid (2,4-D), p-chlorophenoxyacetic acid, indole-3-acetic acid, indole-3-butyric acid, indole-3-propionic acid, 1-naphthaleneacetic acid, β-naphthoxyacetic acid, picloram, 2,3,5-triiodobenzoic acid (TIBA), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)] and 7 cytokinins [6-benzylaminopurine, forchlorfenuron, 1,3-diphenylurea, 2-isopentenyladenine, kinetin (KIN), thidiazuron, zeatin] applied at 0.5 and 5.0 mg l^?1, jointly with 5.0 or 0.5 mg l^?1 KIN or 2,4-D (for auxins and cytokinins, respectively—36 phytohormone combinations in total). Statistical analysis of the relationships between callus growth [expressed as growth index (Gi)] and the accumulation of isoflavones showed positive correlation in the cytokinin group (r_xy values from 0.13 to 0.61) and negative correlation within auxins (r_xy values from ?0.31 to ?0.39). Among the cytokinins tested, the highest isoflavone content (6,436.26 mg/100 g dry weight) and the fastest biomass growth (Gi = 892.46 %) were obtained for 0.5 mg l^?1 KIN used jointly with 5.0 mg l^?1 2,4-D. In the group of auxins, the combination of 0.5 mg l^?1 TIBA and 5.0 mg l^?1 KIN provided the fastest culture growth (Gi = 983.07 %) and the isoflavone concentration of 10,474.23 mg/100 g dry weight, which is so far the highest amount of these metabolites achieved in callus cultures of higher plants.     

Plant regeneration from protoplasts in Indian local Coriandrum sativum L.: scanning electron microscopy and histological evidences for somatic embryogenesis

Coriandrum sativum L. is an annual herb belonging to the family Umbelliferae. It is used as a spice plant in Indian subcontinent and it has several medicinal applications as well. In this present article, an efficient plant regeneration protocol from protoplasts via somatic embryogenesis was established and is reported. This is the first ever protoplast isolation study in Indian local coriander in which plant regeneration was achieved. Hypocotyl-derived embryogenic callus was used as a source of protoplast. The embryogenic callus suspension was prepared by transferring tissues onto rotary-agitated liquid Murashige and Skoog, added with 1.0 mg l^?1 2,4-Dichlorophenoxyacetic acid (2,4-D) and 1.0 mg l^?1 KIN (6-furfurylaminopurine). The suspension was digested with enzymatic solutions and a combination of cellulase (2.0 %), pectinase (1.0 %), macerozyme (0.02 %) and driselase (0.50 %) induced maximum yield of protoplasts (34.25 × 10⁵). In 1.0 mg l^?1 2,4-D + 1.0 mg l^?1 KIN containing medium, protoplasts divided well and formed maximum number of microcolonies (14.30/test tube). The protoplast callus (PC) biomass grew well in solid medium. The protoplast embryogenic callus was rich in protein, proline and sugar compared to non-embryogenic PC. The protoplast originated callus later differentiated into somatic embryos. The somatic embryo morphology, scanning electron microscopy and histology of embryo origin and development were investigated and discussed in details in this present communication. In 1.0 mg l^?1 2,4-D + 0.5 mg l^?1 BA (6-Benzyladenine), maximum number of embryos were formed on microcallus (26.6/callus mass). The embryo matured and germinated into plantlets at a low to moderate rate, highest (31.3 %) embryo germination was observed in 1.0 mg l^?1 BA + 0.5 mg l^?1 α-Naphthalene acetic acid added medium. The entire process of regeneration took about 4–5 months’ time for recovering plantlets from protoplasts.     

Biodegradation of 4-bromophenol by Arthrobacter chlorophenolicus A6 in batch shake flasks and in a continuously operated packed bed reactor

The present study investigated growth and biodegradation of 4-bromophenol (4-BP) by Arthrobacter chlorophenolicus A6 in batch shake flasks as well as in a continuously operated packed bed reactor (PBR). Batch growth kinetics of A. chlorophenolicus A6 in presence of 4-BP followed substrate inhibition kinetics with the estimated biokinetic parameters value of μ _max = 0.246 h^?1, K _i = 111 mg L^?1, K _s  = 30.77 mg L^?1 and K = 100 mg L^?1. In addition, variations in the observed and theoretical biomass yield coefficient and maintenance energy of the culture were investigated at different initial 4-BP concentration. Results indicates that the toxicity tolerance and the biomass yield of A. chlorophenolicus A6 towards 4-BP was found to be poor as the organism utilized the substrate mainly for its metabolic maintenance energy. Further, 4-BP biodegradation performance by the microorganism was evaluated in a continuously operated PBR by varying the influent concentration and hydraulic retention time in the ranges 400–1,200 mg L^?1 and 24–7.5 h, respectively. Complete removal of 4-BP was achieved in the PBR up to a loading rate of 2,276 mg L^?1 day^?1.