Kneading Technique for Preparation of Binary Solid Dispersion of Meloxicam with Poloxamer 188

The aim of the present study was to enhance the dissolution rate of meloxicam (MLX), a practically water-insoluble drug by preparation of solid dispersion using a hydrophilic polymer, poloxamer 188 (PXM). The kneading technique was used to prepare solid dispersions. A 3² full factorial design approach was used for optimization wherein the drug, polymer ratio (X ₁), and the kneading time (X ₂) were selected as independent variables and the dissolution efficiency at 60 min (%DE₆₀) and yield percent were selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of MLX from PXM solid dispersions, a high level of X ₁ and a high level of X ₂ were suitable. The use of a factorial design approach helped in optimization of the preparation and formulation of solid dispersion. The optimized formula was characterized by solubility studies, angle of repose, and contact angle; Fourier transform infrared spectroscopy, differential scanning calorimetry, x-ray diffraction studies, and scanning electron microscopy demonstrated that enhanced dissolution of MLX from solid dispersion might be due to a decrease in the crystallinity of MLX and PXM. Analysis of dissolution data of optimized formula indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics as Fickian diffusion. In conclusion, dissolution enhancement of MLX was obtained by preparing its solid dispersion with PXM using kneading technique.     

Preparation and In Vitro Evaluation of Solid Dispersions of Total Flavones of Hippophae rhamnoides L.

The purpose of this study was to enhance the dissolution of total flavones of Hippophae rhamnoides L. (TFH) by solid dispersions consisting of the drug and a polymeric carrier, poloxamer 188 (PXM). The solvent evaporation method was used to prepare solid dispersions. A 3² full-factorial design approach was used for optimization wherein the amount of solvent (X ₁) and the drug-to-polymer ratio (X ₂) were selected as independent variables and the percentage of TFH dissolved in 10 min (Q ₁₀) was selected as the dependent variable. Multiple linear regression analysis revealed that a suitable level of X ₁ and X ₂ was required for obtaining higher dissolution of TFH from PXM solid dispersions. Solid dispersions were characterized by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and dissolution tests. Characterization studies revealed that solid dispersion of TFH–PXM showed enhancement of TFH dissolution due to the conversion of TFH into a less crystalline and/or amorphous form. In conclusion, dissolution enhancement of TFH was obtained by preparing its solid dispersions in PXM using solvent method.     

Enhancement of dissolution profile by solid dispersion (kneading) technique

This article investigates enhancement of the dissolution profile of valdecoxib using solid dispersion with PVP. The article also describes the preparation of fast-dissolving tablets of valdecoxib by using a high amount of superdisintegrants. A phase solubility method was used to evaluate the effect of various water-soluble polymers on aqueous solubility of valdecoxib. Polyvinyl pyrrolidone (PVP K-30) was selected and solid dispersions were prepared by the method of kneading. Dissolution studies, using the USP paddle method were performed for solid dispersions of valdecoxib. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and x-ray diffractometry (XRD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Tablets were formulated containing solid dispersion products and compared with commercial products. IR spectroscopy, XRD, and DSC showed no change in the crystal structure of valdecoxib. Dissolution of valdecoxib improved significantly in solid dispersion products (<85% in 5 minutes). Tablets containing solid dispersion exhibited better dissolution profile than commercial tablets. Thus, the solid dispersion technique can be successfully used for improvement of dissolution of valdecoxib. Published: August 18, 2006     

Improved Bioavailability of Poorly Water-Soluble Drug Curcumin in Cellulose Acetate Solid Dispersion

Curcumin (Cur), one of the most widely used natural active constituents with a great variety of beneficial biological and pharmacological activities, is a practically water-insoluble substance with a short biologic half-life. The aim of this study was to develop a sustained-release solid dispersion by employing water-insoluble carrier cellulose acetate for solubility enhancement, release control, and oral bioavailability improvement of Cur. Solid dispersions were characterized by solubility, in vitro drug release, Fourier transform infrared spectroscopy, X-ray diffractometry, and differential scanning calorimetry studies. The in vivo performance was assessed by a pharmacokinetic study. Solid-state characterization techniques revealed the amorphous nature of Cur in solid dispersions. Solubility/dissolution of Cur was enhanced in the formulations in comparison with pure drug. Sustained-release profiles of Cur from the solid dispersions were ideally controlled in vitro up to 12 h. The optimized formulation provided an improved pharmacokinetic parameter (C _max = 187.03 ng/ml, t _max = 1.95 h) in rats as compared with pure drug (C _max = 87.06 ng/ml, t _max = 0.66 h). The information from this study suggests that the developed solid dispersions successfully enhanced the solubility and sustained release of poorly water-soluble drug Cur, thus improving its oral bioavailability effectively.     

Effect of N-trimethyl chitosan enhancing the dissolution properties of the lipophilic drug cyclosporin A

The aim was to evaluate the influence of N-trimethyl chitosan chloride (TMC) as a carrier for solid dispersion on the dissolution of poorly water-soluble drugs. In this study, we used cyclosporin A(CyA) as a model drug and TMC as a carrier. The effect of various formulation and process variables including TMC-to-CyA mixing weight ratio, weigh molecular(M_w) of TMC and methods used to disperse CyA along with the TMC on the drug dissolution was investigated. The nature of CyA dispersed in the matrix was studied by powder X-ray diffractometry (PXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and dissolution rate analyses. It was proved that all solid mixtures of CyA with TMCs showed a significantly rapid dissolution rate compared to pure drug and physical mixture. The greater the TMC content the higher the drug dissolution was, up to a maximum corresponding to a polymer: drug ratio of 3:1. The lower the M_w of TMC, the more important the polymer effect was. The dissolution of CyA was remarkably improved by the solid dispersion. The drug dissolution enhancement was attributed to the decreased drug crystallinity and size and polymer wetting effect. There was no significant difference in the efficiency of improving the drug dissolution between the solid dispersions prepared by solvent dispersing and by co-grinding. It was suggested that the TMC with a lower molecular weight is a useful carrier for solid dispersion.     

Comparison of Spray Freeze Drying and the Solvent Evaporation Method for Preparing Solid Dispersions of Baicalein with Pluronic F68 to Improve Dissolution and Oral Bioavailability

The objective of this study was to prepare solid dispersions consisting of baicalein and a carrier with a low glass transition/melting point (Pluronic F68) by spray freeze drying (SFD). We compared these powders to those produced from the conventional solvent evaporation method. In the SFD process, a feeding solution was atomized above the surface of liquid nitrogen following lyophilization, which resulted in instantaneously frozen microparticles. However, solid dispersions prepared by the solvent evaporation method formed a sticky layer on the glass flask with crystalline baicalein separated out from the carrier. The powder samples were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), surface area measurement, differential scanning calorimetry, and Fourier transform infrared spectrometry. SEM and PXRD results suggested that the majority of baicalein in the SFD-processed solid dispersion was in the amorphous state, which has a higher specific surface area than pure baicalein. However, the majority of baicalein was recrystallized in the solid dispersion at the same composition prepared by the solvent evaporation method, which showed a similar dissolution rate to the physical mixture. SFD product was physically and chemically stable after being stored at 40°C with low humidity for 6 months. After enzyme hydrolysis, baicalein in the SFD product displayed a significantly shorter T _max and higher C _max than pure baicalein after oral dosing. The relative bioavailability of the SFD product versus pure baicalein determined by comparing the AUC_0–12 was 233%, which demonstrated the significantly improved oral bioavailability of baicalein produced by the SFD technique.     

Formulation and optimization of mouth dissolve tablets containing rofecoxib solid dispersion

The purpose of the present investigation was to increase the solubility and dissolution rate of rofecoxib by the preparation of its solid dispersion with polyvinyl pyrrolidone K30 (PVP K30) using solvent evaporation method. Drug-polymer interactions were investigated using differential scanning calorimetry (DSC), x-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). For the preparation of rofecoxib mouth dissolve tablets, its 1∶9 solid dispersion with PVP K30 was used with various disintegrants and sublimable materials. In an attempt to construct a statistical model for the prediction of disintegration time and percentage friability, a 3² randomized full and reduced factorial design was used to optimize the influence of the amounts of superdisintegrant and subliming agent. The obtained results showed that dispersion of the drug in the polymer considerably enhanced the dissolution rate. The drug-to-carrier ratio was the controlling factor for dissolution improvement. FTIR spectra revealed no chemical incompatibility between the drug and PVP K30. As indicated from XRD and DSC data, rofecoxib was in the amorphous form, which explains the better dissolution rate of the drug from its solid dispersions. Concerning the optimization study, the multiple regression analysis revealed that an optimum concentration of camphor and a higher percentage of crospovidone are required for obtaining rapidly disintegrating tablets. In conclusion, this investigation demonstrated the potential of experimental design in understanding the effect of the formulation variables on the quality of mouth dissolve tablets containing solid dispersion of a hydrophobic drug.     

Solid Dispersion as an Approach for Bioavailability Enhancement of Poorly Water-Soluble Drug Ritonavir

Ritonavir is an antiretroviral drug characterized by low solubility and high permeability which corresponds to BCS class II drug. The purpose of the study was to develop solid dispersion by different methods and investigate them for in vitro and in vivo performance for enhancing dissolution and bioavailability, respectively. Since the drug possesses food-related absorption, the effect of biorelevant media (FaSSIF and FeSSIF state) on dissolution behavior was also studied. The solid dispersion was prepared using Gelucire as carrier in 1:4 ratio by different methods and were characterized for differential scanning calorimetry (DSC), X-ray diffractometry, scanning electron microscopy, and FT-IR. Oral bioavailability of 10 mg of ritonavir in solid dispersion prepared by solvent evaporation (SE1) and melt method (MM1) was compared with pure drug after oral administration of solid dispersion and pure drug to Albino Wistar rats of either sex. The results suggested formation of eutectic solid dispersion. In vitro dissolution studies was performed in 0.1 N HCl and biorelevant media showed enhanced dissolution rate as compared to pure drug in both FeSSIF media and 0.1 N HCl. The apparent rate of absorption of ritonavir from SE1 (C _max 20221.37 ng/ml, t _max 0.5 h) was higher than that of MM1 (C _max 2,462.2, t _max 1 h) and pure drug (C _max 1,354.8 ng/ml, t _max 0.5 h). On the basis of the result obtained, it was concluded that solid dispersion is a good approach to enhance solubility and bioavailability of poorly water-soluble ritonavir.     

Preparation and characterization of etoricoxib solid dispersions using lipid carriers by spray drying technique

The basic objectives of this study were to prepare and characterize solid dispersions of poorly water-soluble drug etoricoxib using lipid carriers by spray drying technique. The properties of solid dispersions were studied by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), differential scanning calorimetry (DSC), hotstage microscopy (HSM), radiograph powder diffraction (XRPD), and dissolution studies. The absence of etoricoxib peaks in XRPD profiles of solid dispersions suggests the transformation of crystalline etoricoxib into an amorphous form. In the HSM examination of solid dispersions, the dissolution of drug in the lipid carriers was observed, which was also confirmed by the absence of etoricoxib peak in DSC curves of solid dispersions. The DRIFTS spectra revealed the presence of hydrogen bonding in solid dispersions. The in vitro dissolution rate of solid dispersions as compared with pure etoricoxib, spray-dried etoricoxib, and physical mixtures of drug with lipid carriers. Therefore, the dissolution rate of poorly water-soluble drug etoricoxib can be significantly enhanced by the preparation of solid dispersions using lipid carriers by spray drying technique. Published: October 19, 2005     

Effect of hydrophilic swellable polymers on dissolution enhancement of carbamazepine solid dispersions studied using response surface methodology

The objective of this work was to study dissolution enhancement efficiency and solid dispersion formation ability of hydrophilic swellable polymers such as sodium carboxymethyl cellulose (Na-CMC), sodium starch glycolate (SSG), pregelatinized starch (PGS), and hydroxypropylmethyl cellulose (HPMC) with carbamazepine using 3² full factorial design for each of the polymers. Solid dispersions of carbamazepine were prepared using solvent evaporation method with around 70% solvent recovery. The independent variables were the amount of polymer and organic solvent. The dependent variables assessed were percentage drug dissolved at various time points and dispersion efficiency (ie, in terms of particle size of solid dispersion). Solid dispersions were evaluated for percentage drug dissolved, wettability, differential scanning calorimetry, scanning electron microscopy, and angle of repose. Multiple linear regression of results obtained led to equations, which generated contour plots to relate the dependent variables. Similarity factor and mean dissolution time were used to compare dissolution patterns obtained in distilled water and simulated gastric fluid United States Pharmacopeia (USP) XXVI of pH 1.2. Maximum drug dissolution was obtained with polymer order Na-CMC>SSG>PGS>HPMC. Particle size of drug was reduced ≈ 10–15, 3–5, 5–7, and 10–25 times in Na-CMC, SSG, PGS, and HPMC solid dispersions, respectively; whereas wettability of solid dispersions was found in the order of Na-CMC>HPMC>PGS>SSG. Angle of repose was found to be in the range of 29° to 35° for all solid dispersions, which shows good flowability characteristics. HPMC showed increase in drug dissolution up to an optimized level; however, furthers increase in its concentration decreased drug dissolution. Published: April 6, 2007     

Preparation and Evaluation of Solid Dispersions of A New Antitumor Compound Based on Early-Stage Preparation Discovery Concept

Ensuring sufficient drug solubility is a crucial problem in pharmaceutical-related research. For water-insoluble drugs, various formulation approaches are employed to enhance the solubility and bioavailability of lead compounds. The goal of this study was to enhance the dissolution and absorption of a new antitumor lead compound, T-OA. Early-stage preparation discovery concept was employed in this study. Based on this concept, a solid dispersion system was chosen as the method of improving drug solubility and bioavailability. Solid dispersions of T-OA in polyvinylpyrrolidone (PVP) K30 were prepared by the solvent evaporation method. Dissolution testing determined that the ideal drug-to-PVP ratio was 1:5. X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry were employed to confirm the formation of solid dispersions. Scanning electron microscopy demonstrated that T-OA was converted into an amorphous form. Both in vitro dissolution testing and the in vivo studies demonstrated that the solubility and bioavailability of T-OA were significantly improved when formulated in a solid dispersion with PVP. The dissolution rate of the T-OA/PVP solid dispersion was greatly enhanced relative to the pure drug, and the relative bioavailability of T-OA solid dispersions was found to be 392.0%, which is 4-fold higher than the pure drug.     

Application of Carrier and Plasticizer to Improve the Dissolution and Bioavailability of Poorly Water-Soluble Baicalein by Hot Melt Extrusion

The objective of this study was to develop a suitable formulation for baicalein (a poorly water-soluble drug exhibiting high melting point) to prepare solid dispersions using hot melt extrusion (HME). Proper carriers and plasticizers were selected by calculating the Hansen solubility parameters, evaluating melting processing condition, and measuring the solubility of obtained melts. The characteristic of solid dispersions prepared by HME was evaluated. The dissolution performance of the extrudates was compared to the pure drug and the physical mixtures. Physicochemical properties of the extrudates were characterized by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Relative bioavailability after oral administration in beagle dogs was assessed. As a result, Kollidon VA64 and Eudragit EPO were selected as two carriers; Cremophor RH was used as the plasticizer. The dissolution of all the extrudates was significantly improved. DSC and PXRD results suggested that baicalein in the extrudates was amorphous. FTIR spectroscopy revealed the interaction between drug and polymers. After oral administration, the relative bioavailability of solid dispersions with VA64 and EPO was comparative, about 2.4- and 2.9-fold greater compared to the pure drug, respectively.

Figure

Open in a separate windowᅟKEY WORDS: baicalein, carrier, high melting point, hot melt extrusion, plasticizer, solid dispersion     

Effervescence Assisted Fusion Technique to Enhance the Solubility of Drugs

The solubility of five poorly soluble drugs was enhanced by using an effervescence assisted solid dispersion (EASD) technique. EASDs were prepared by using modified fusion method. Drug and hydrophilic carrier were melted, and in this molten mixture, effervescence was generated by adding effervescence couple comprising organic acid (citric acid) and carbonic base (sodium bicarbonate). Solubility of drug powders, solid dispersions, and EASDs was determined at 25°C using shake flask method. Atorvastatin calcium, cefuroxime axetil, clotrimazole, ketoconazole, and metronidazole benzoate were estimated using a spectrophotometer at 246, 280, 260, 230, and 232 nm (λ_max), respectively. Solubility of atorvastatin calcium (from 100 to 345 μg/ml), cefuroxime axetil (from 441 to 1948 μg/ml), clotrimazole (from 63 to 677 μg/ml), ketoconazole (from 16 to 500 μg/ml), and metronidazole benzoate (from 112 to 208 μg/ml) in EASDs was enhanced by 3.45-, 4.4-, 10.7-, 31.2-, and 1.8-fold, respectively. Scanning electron micrographs of drug powder, solid dispersion, and EASDs were compared. Scanning electron micrographs of EASDs showed a uniform distribution of drug particles in the carrier matrix. Morphology (size and shape) of cefuroxime axetil particles was altered in solid dispersion as well as in EASD. EASDs showed better solubility enhancement than conventional solid dispersions. The present technique is better suitable for drugs having a low melting point or melt without charring. Effervescence assisted fusion technique of preparing solid dispersions can be employed for enhancing solubility, dissolution, and bioavailability of poorly soluble drugs.KEY WORDS: dissolution, effervescence, fusion, solid dispersion, solubility     

Solubility Enhancement of Lovastatin by Modified Locust Bean Gum Using Solid Dispersion Techniques

The aim of the present study was to improve the solubility of poorly water soluble drug lovastatin (LS) by solid dispersion (SD) techniques using modified locust bean gum (MLBG) as a carrier. The locust bean gum (LBG) was modified by heating and there observed irreversible decrease in viscosity, whereas swelling property remains unaffected. The advantage of modification of LBG was illustrated by difference in dissolution profiles of their SD. Effect of polymer concentration and methods of preparation on solubility enhancement were studied using solubility and dissolution studies, respectively. The result of solubility study showed increase in solubility of LS with increase in concentration of MLBG. It was found that the dissolution rate of LS from its SD was dependent on the method of preparation of solid dispersions. Dissolution study revealed that the modified solvent evaporation is most convenient and effective method for solubility enhancement of poorly water soluble drug LS, among various methods of preparation of SD. The prepared SDs were characterized by differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction study. In vivo study was performed by measuring 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG Co-A) reductase inhibition activity. Significant reduction in HMG Co-A reductase activity was observed in case of solid dispersions of LS than plain LS. In conclusion, MLBG could be used as a potential carrier in enhancing the dissolution rate and bioavailability of LS.     

Gastroretentive drug delivery system of carbamazepine: Formulation optimization using simplex lattice design: A technical note

Summary and Conclusion  An attempt was made to develop a gastroretentive drug delivery system of carbamazepine using HPMC, sodium bicarbonate, and EC as matrixing agent, gas-generating agent, and floating enhancer, respectively. A simplex lattice design was applied to investigate the combined effect of 3 formulation variables (ie, amount of HPMC (X ₁), EC (X ₂), and sodium bicarbonate (X ₃). Results of multiple regression analysis indicated that low levels ofX ₁ andX ₂ and a high level ofX ₃ should be used to manufacture the tablet formulation with desired in vitro floating time and dissolution. Formulation S3 was selected as a promising formulation and was found stable at 40°C temperature and 75% RH for 3 months. Published: February 9, 2007     

Biomimetic Dissolution: A Tool to Predict Amorphous Solid Dispersion Performance

The presented study describes the development of a membrane permeation non-sink dissolution method that can provide analysis of complete drug speciation and emulate the in vivo performance of poorly water-soluble Biopharmaceutical Classification System class II compounds. The designed membrane permeation methodology permits evaluation of free/dissolved/unbound drug from amorphous solid dispersion formulations with the use of a two-cell apparatus, biorelevant dissolution media, and a biomimetic polymer membrane. It offers insight into oral drug dissolution, permeation, and absorption. Amorphous solid dispersions of felodipine were prepared by hot melt extrusion and spray drying techniques and evaluated for in vitro performance. Prior to ranking performance of extruded and spray-dried felodipine solid dispersions, optimization of the dissolution methodology was performed for parameters such as agitation rate, membrane type, and membrane pore size. The particle size and zeta potential were analyzed during dissolution experiments to understand drug/polymer speciation and supersaturation sustainment of felodipine solid dispersions. Bland-Altman analysis was performed to measure the agreement or equivalence between dissolution profiles acquired using polymer membranes and porcine intestines and to establish the biomimetic nature of the treated polymer membranes. The utility of the membrane permeation dissolution methodology is seen during the evaluation of felodipine solid dispersions produced by spray drying and hot melt extrusion. The membrane permeation dissolution methodology can suggest formulation performance and be employed as a screening tool for selection of candidates to move forward to pharmacokinetic studies. Furthermore, the presented model is a cost-effective technique.     

Dissolution Properties and Physical Characterization of Telmisartan–Chitosan Solid Dispersions Prepared by Mechanochemical Activation

Solid dispersion systems of telmisartan (a poorly water-soluble antihypertension drug) with biopolymer carrier chitosan have been investigated in this study. The mechanism of solubilization of chitosan for drug has been studied. In addition, the influence of several factors was carefully examined, including the preparation methods, the drug/carrier weight ratios, and the milling time. Drug dissolution and physical characterization of different binary systems were studied by in vitro dissolution test, particle size distribution, Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffractometry, and scanning electron microscopy. The results presented that the weak basic property of chitosan appeared as the main driving force for the drug dissolution enhancement. Other effects such as decreased drug crystallinity and size played a positive contributory role. Among the preparation methods, cogrinding was the best method showing strong drug amorphization, reduced particle size, and enhanced dissolution. The drug dissolution markedly improved with increasing the amount of chitosan in solid mixtures. As a result, a significant effect of chitosan increasing telmisartan dissolution has been demonstrated, and cogrinding in a roll ball mill was the best way to prepare solid dispersions, which had high degree of uniformity in drug content and had a practical application in manufacturing.     

Evaluation of Griseofulvin Binary and Ternary Solid Dispersions with HPMCAS

The stability and dissolution properties of griseofulvin binary and ternary solid dispersions were evaluated. Solid dispersions of griseofulvin and hydroxypropyl methylcellulose acetate succinate (HPMCAS) were prepared using the spray drying method. A third polymer, poly[N-(2-hydroxypropyl)methacrylate] (PHPMA), was incorporated to investigate its effect on the interaction of griseofulvin with HPMCAS. In this case, HPMCAS can form H bonds with griseofulvin directly; the addition of PHPMA to the solid dispersion may enhance the stability of the amorphous griseofulvin due to greater interaction with griseofulvin. The X-ray powder diffraction results showed that griseofulvin (binary and ternary solid dispersions) remained amorphous for more than 19 months stored at 85% RH compared with the spray-dried griseofulvin which crystallized totally within 24 h at ambient conditions. The Fourier transform infrared scan showed that griseofulvin carbonyl group formed hydrogen bonds with the hydroxyl group in the HPMCAS, which could explain the extended stability of the drug. Further broadening in the peak could be seen when PHPMA was added to the solid dispersion, which indicates stronger interaction. The glass transition temperatures increased in the ternary solid dispersions regardless of HPMCAS grade. The dissolution rate of the drug in the solid dispersion (both binary and ternary) has significantly increased when compared with the dissolution profile of the spray-dried griseofulvin. These results reveal significant stability of the amorphous form due to the hydrogen bond formation with the polymer. The addition of the third polymer improved the stability but had a minor impact on dissolution.     

Physicochemical Investigations and Stability Studies of Amorphous Gliclazide

Gliclazide (GLI), a poorly water-soluble antidiabetic, was transformed into a glassy state by melt quench technique in order to improve its physicochemical properties. Chemical stability of GLI during formation of glass was assessed by monitoring thin-layer chromatography, and an existence of amorphous form was confirmed by differential scanning calorimetry and X-ray powder diffractometry. The glass transition occurred at 67.5°C. The amorphous material thus generated was examined for its in vitro dissolution performance in phosphate buffer (pH 6.8). Surprisingly, amorphous GLI did not perform well and was unable to improve the dissolution characteristics compared to pure drug over entire period of dissolution studies. These unexpected results might be due to the formation of a cohesive supercooled liquid state and structural relaxation of amorphous form toward the supercooled liquid region which indicated functional inability of amorphous GLI from stability point of view. Hence, stabilization of amorphous GLI was attempted by elevation of T_g via formation of solid dispersion systems involving comprehensive antiplasticizing as well as surface adsorption mechanisms. The binary and ternary amorphous dispersions prepared with polyvinylpyrrolidone K30 (as antiplasticizer for elevation of T_g) and Aerosil 200® and/or Sylysia® 350 (as adsorbent) in the ratio of 1:1:1 (w/w) using kneading and spray-drying techniques demonstrated significant enhancement in rate and extent of dissolution of drug initially. During accelerated stability studies, ternary systems showed no significant reduction in drug dissolution performance over a period of 3 months indicating excellent stabilization of amorphous GLI.Key words: amorphous, gliclazide, solid dispersion, stability studies, T_g     

Improved dissolution of oleanolic acid with ternary solid dispersions

The purpose of this study was to enhance the dissolution of oleanolic acid by solid dispersions consisting of the drug, a polymeric carrier, and a surfactant. Binary solid dispersions consisting of oleanolic acid and polyvinylpyrrolidone were prepared for comparison. Polysorbate 80, a nonionic surfactant, was incorporated into binary solid dispersions as the third component to prepare ternary solid dispersions. Solid dispersions were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, and dissolution tests. The crystallinization of OA was prohibited in solid dispersions. Both the binary and ternary solid dispersions enhanced the dissolution of OA. Moreover, the dissolution of ternary solid dispersion was faster compared with that of binary solid dispersion. Polysorbate 80 played an important positive role in dissolution of the solid dispersion.