Tiny TIM: a small, tetrameric, hyperthermostable triosephosphate isomerase

Comparative structural studies on proteins derived from organisms with growth optima ranging from 15 to 100 degrees C are beginning to shed light on the mechanisms of protein thermoadaptation. One means of sustaining hyperthermostability is for proteins to exist in higher oligomeric forms than their mesophilic homologues. Triosephosphate isomerase (TIM) is one of the most studied enzymes, whose fold represents one of nature's most common protein architectures. Most TIMs are dimers of approximately 250 amino acid residues per monomer. Here, we report the 2.7 A resolution crystal structure of the extremely thermostable TIM from Pyrococcus woesei, a hyperthermophilic archaeon growing optimally at 100 degrees C, representing the first archaeal TIM structure. P. woesei TIM exists as a tetramer comprising monomers of only 228 amino acid residues. Structural comparisons with other less thermostable TIMs show that although the central beta-barrel is largely conserved, severe pruning of several helices and truncation of some loops give rise to a much more compact monomer in the small hyperthermophilic TIM. The classical TIM dimer formation is conserved in P. woesei TIM. The extreme thermostability of PwTIM appears to be achieved by the creation of a compact tetramer where two classical TIM dimers interact via an extensive hydrophobic interface. The tetramer is formed through largely hydrophobic interactions between some of the pruned helical regions. The equivalent helical regions in less thermostable dimeric TIMs represent regions of high average temperature factor. The PwTIM seems to have removed these regions of potential instability in the formation of the tetramer. This study of PwTIM provides further support for the role of higher oligomerisation states in extreme thermal stabilisation.     

Comparison of the refined crystal structures of liganded and unliganded chicken, yeast and trypanosomal triosephosphate isomerase.

The refined crystal structures of chicken, yeast and trypanosomal triosephosphate isomerase (TIM) have been compared. TIM is known to exist in an "open" (unliganded) and "closed" (liganded) conformation. For chicken TIM only the refined open structure is available, whereas for yeast TIM and trypanosomal TIM refined structures of both the open and the closed structure have been used for this study. Comparison of these structures shows that the open structures of chicken TIM, yeast TIM and trypanosomal TIM are essentially identical. Also it is shown that the closed structures of yeast TIM and trypanosomal TIM are essentially identical. The conformational difference between the open and closed structures concerns a major shift (7 A) in loop-6. Minor shifts are observed in the two adjacent loops, loop-5 (1 A) and loop-7 (1 A). The pairwise comparison of the three different TIM barrels shows that the 105C alpha atoms of the core superimpose within 0.9 A. The sequences of these three TIMs have a pairwise sequence identity of approximately 50%. The residues that line the active site are 100% conserved. The residues interacting with each other across the dimer interface show extensive variability, but the direct hydrogen bonds between the two subunits are well conserved. The orientation of the two monomers with respect to each other is almost identical in the three different TIM structures. There are 56 (22%) conserved residues out of approximately 250 residues in 13 sequences. The functions of most of these conserved residues can be understood from the available open and closed structures of the three different TIMs. Some of these residues are quite far from the active site. For example, at a distance of 19 A from the active site there is a conserved saltbridge interaction between residues at the C-terminal ends of alpha-helix-6 and alpha-helix-7. This anchoring contrasts with the large conformational flexibility of loop-6 and loop-7 near the N termini of these helices. The flexibility of loop-6 is facilitated by a conserved large empty cavity near the N terminus of alpha-helix-6, which exists only in the open conformation.     

Phosphoglycerate kinase and triosephosphate isomerase from the hyperthermophilic bacterium Thermotoga maritima form a covalent bifunctional enzyme complex.

Phosphoglycerate kinase (PGK) from the hyperthermophilic bacterium Thermotoga maritima has been purified to homogeneity. A second larger enzyme with PGK activity and identical N-terminal sequence was also found. Surprisingly, this enzyme displayed triosephosphate isomerase (TIM) activity. No other TIM is detectable in T. maritima crude extracts. As shown by ultracentrifugal analysis, PGK is a 43 kDa monomer, whereas the bifunctional PGK-TIM fusion protein is a homotetramer of 240-285 kDa. SDS-PAGE indicated a subunit size of 70 kDa for the fusion protein. Both enzymes show high thermostability. Measurements of the catalytic properties revealed no extraordinary results. pH optima, Km values and activation energies were found to be in the range observed for other PGKs and TIMs investigated so far. The corresponding pgk and tpi genes are part of the apparent gap operon of T. maritima. This gene segment contains two overlapping reading frames, where the 43 kDa PGK is encoded by the upstream open reading frame, the pgk gene. On the other hand, the 70 kDa PGK-TIM fusion protein is encoded jointly by the pgk gene and the overlapping downstream open reading frame of the tpi gene. A programmed frameshift may be responsible for this fusion. A comparison of the amino acid sequence of both the PGK and the TIM parts of the fusion protein with those of known PGKs and TIMs reveals high similarity to the corresponding enzymes from different procaryotic and eucaryotic organisms.     

Structure and function of a regulated archaeal triosephosphate isomerase adapted to high temperature

Triosephophate isomerase (TIM) is a dimeric enzyme in eucarya, bacteria and mesophilic archaea. In hyperthermophilic archaea, however, TIM exists as a tetramer composed of monomers that are about 10% shorter than other eucaryal and bacterial TIM monomers. We report here the crystal structure of TIM from Thermoproteus tenax, a hyperthermophilic archaeon that has an optimum growth temperature of 86 degrees C. The structure was determined from both a hexagonal and an orthorhombic crystal form to resolutions of 2.5A and 2.3A, and refined to R-factors of 19.7% and 21.5%, respectively. In both crystal forms, T.tenax TIM exists as a tetramer of the familiar (betaalpha)(8)-barrel. In solution, however, and unlike other hyperthermophilic TIMs, the T.tenax enzyme exhibits an equilibrium between inactive dimers and active tetramers, which is shifted to the tetramer state through a specific interaction with glycerol-1-phosphate dehydrogenase of T.tenax. This observation is interpreted in physiological terms as a need to reduce the build-up of thermolabile metabolic intermediates that would be susceptible to destruction by heat. A detailed structural comparison with TIMs from organisms with growth optima ranging from 15 degrees C to 100 degrees C emphasizes the importance in hyperthermophilic proteins of the specific location of ionic interactions for thermal stability rather than their numbers, and shows a clear correlation between the reduction of heat-labile, surface-exposed Asn and Gln residues with thermoadaptation. The comparison confirms the increase in charged surface-exposed residues at the expense of polar residues.     

Structure and inactivation of triosephosphate isomerase from Entamoeba histolytica

Triosephosphate isomerase (TIM) has been proposed as a target for drug design. TIMs from several parasites have a cysteine residue at the dimer interface, whose derivatization with thiol-specific reagents induces enzyme inactivation and aggregation. TIMs lacking this residue, such as human TIM, are less affected. TIM from Entamoeba histolytica (EhTIM) has the interface cysteine residue and presents more than ten insertions when compared with the enzyme from other pathogens. To gain further insight into the role that interface residues play in the stability and reactivity of these enzymes, we determined the high-resolution structure and characterized the effect of methylmethane thiosulfonate (MMTS) on the activity and conformational properties of EhTIM. The structure of this enzyme was determined at 1.5A resolution using molecular replacement, observing that the dimer is not symmetric. EhTIM is completely inactivated by MMTS, and dissociated into stable monomers that possess considerable secondary structure. Structural and spectroscopic analysis of EhTIM and comparison with TIMs from other pathogens reveal that conformational rearrangements of the interface after dissociation, as well as intramonomeric contacts formed by the inserted residues, may contribute to the unusual stability of the derivatized EhTIM monomer.     

Structural differences in triosephosphate isomerase from different species and discovery of a multitrypanosomatid inhibitor

We examined the interfaces of homodimeric triosephosphate isomerase (TIM) from eight different species. The crystal structures of the enzymes showed that a portion of the interface is markedly similar in TIMs from Trypanosoma cruzi (TcTIM), Trypanosoma brucei, and Leishmania mexicana and significantly different from that of TIMs from human, yeast, chicken, Plasmodium falciparum, and Entamoeba histolytica. Since this interfacial region is central in the stability of TcTIM, we hypothesized that it would be possible to find agents that selectively affect the stability of TIMs from the three trypanosomatids. We found that 6,6'-bisbenzothiazole-2,2' diamine in the low micromolar range causes a desirable irreversible inactivation of the enzymes from the three trypanosomatids and has no effect on the other five TIMs. Thus, the data indicate that it is possible to find compounds that induce selective inactivation of the enzymes from three different trypanosomatids.     

Crystal structure of the mitochondrial chaperone TIM9.10 reveals a six-bladed alpha-propeller

Import of proteins into mitochondria occurs by coordinated actions of preprotein translocases in the outer and inner membranes. Tim9 and Tim10 are translocase components of the intermembrane space, related to deafness-dystonia peptide 1 (DDP1). They coassemble into a hexamer, TIM9.10, which captures and chaperones precursors of inner membrane metabolite carriers as they exit the TOM channel in the outer membrane. The crystal structure of TIM9.10 reveals a previously undescribed alpha-propeller topology in which helical "blades" radiate from a narrow central pore lined with polar residues. The propeller blades are reminiscent of "tentacles" in chaperones Skp and prefoldin. In each TIM9.10 subunit, a signature "twin CX3C" motif forms two intramolecular disulfides. There is no obvious binding pocket for precursors, which we suggest employ the chaperone-like tentacles of TIM9.10 as surrogate lipid contacts. The first reported crystal structure of a mitochondrial translocase assembly provides insights into selectivity and regulation of precursor import.     

Structures of the “open” and “closed” state of trypanosomal triosephosphate isomerase,as observed in a new crystal form: Implications for the reaction mechanism

The structure of trypanosomal triosephosphate isomerase (TIM)has been solved at a resolution of 2.1Å in a new crystal form grown at pH 8.8 from PEG6000. In this new crystal form (space group C2, cell dimensions 94.8 Å, 48.3 Å, 131.0 Å, 90.0°, 100.3°, 90.0°), TIM is present in a ligand-free state. The asymmetric unit consists of two TIM subunits. Each of these subunits is part of a dimer which is sitting on a crystallographic twofold axis, such that the crystal packing is formed from two TIM dimers in two distinct environments. The two constituent monomers of a given dimer are, therefore, crystallographically equivalent. In the ligand-free state of TIM in this crystal form, the two types of dimer are very similar in structure, with the flexible loops in the “Open” conformation. For one dimer (termed molecule-1), the flexible loop (loop-6) is involved in crystal contacts. Crystals of this type have been used in soaking experiments with 0.4 M ammonium sulphate (studied at 2.4 Å resolution), and with 40 μM phosphoglycolohydroxamate (studied at 2.5 Å resolution). It is found that transfer to 0.4 M ammonuum sulphate (equal to 80 times the Ki of sulphate for TIM), gives rise to significant sulphate binding at the active site of one dimer (termed molecule-2), and less significant binding at the active site of the other. In neither dimer does sulphate induce a “closed” conformation. In a mother liquor containing 40 μM phosphoglycolohydroxamate (equal to 10 times the Ki of phosphoglycolohydroxamate for TIM), an inhibitor molecule binds at the active site of only that dimer of which the flexible loop is free from crystal contacts (molecule-2). In this dimer, it induces a closed conformation. These three structures are compared and discussed with respect to the mode of binding of ligand in the active site as well as with respect to the conformational changes resulting from ligand binding. © 1993 Wiley-Liss, Inc.     

Triosephosphate isomerase genes in two trophic modes of euglenoids (euglenophyceae) and their phylogenetic analysis

Two different length cDNAs encoding triosephosphate isomerase (TIM) were identified in the two trophic modes of euglenoids, the phototrophic Euglena gracilis and Euglena intermedia and the saprotrophic Astasia longa. Sequence analyses and presequence prediction indicated that the shorter cDNA encodes a cytosolic TIM and the longer cDNA encodes a plastid TIM (pTIM). The typical presequence of the putative A. longa pTIM and the high sequence similarity between A. longa pTIM and E. gracilis pTIM imply that A. longa pTIM is targeted to plastids. Therefore, although the plastids of A. longa have lost the ability of photosynthesis, they might retain other TIM-related function(s), such as glycolysis and the synthesis of isopentenyl diphosphate or fatty acids. Including the TIM sequences obtained by us from chlorophytes and rhodophytes, our phylogenetic analyses indicated that euglenoid TIMs group neither with TIMs of kinetoplastids, which share the nearest common ancestor with euglenoids, nor are closely related to TIMs of chlorophytes, which are considered to be the donors of euglenoid plastids through secondary endosymbiosis. Instead, they group with TIMs of rhodophytes. In addition, our amino acid sequence alignment and structure modeling showed that TIMs of euglenoids and rhodophytes share a unique 2-aa insertion within their loop-4 areas. Therefore, either tim convergent evolution or lateral gene transfer (more probably) might have occurred between euglenoids and rhodophytes after the divergence of euglenoids with kinetoplastids.     

Crystal structure of recombinant triosephosphate isomerase from Bacillus stearothermophilus. An analysis of potential thermostability factors in six isomerases with known three-dimensional structures points to the importance of hydrophobic interactions.

The structure of the thermostable triosephosphate isomerase (TIM) from Bacillus stearothermophilus complexed with the competitive inhibitor 2-phosphoglycolate was determined by X-ray crystallography to a resolution of 2.8 A. The structure was solved by molecular replacement using XPLOR. Twofold averaging and solvent flattening was applied to improve the quality of the map. Active sites in both the subunits are occupied by the inhibitor and the flexible loop adopts the "closed" conformation in either subunit. The crystallographic R-factor is 17.6% with good geometry. The two subunits have an RMS deviation of 0.29 A for 248 C alpha atoms and have average temperature factors of 18.9 and 15.9 A2, respectively. In both subunits, the active site Lys 10 adopts an unusual phi, psi combination. A comparison between the six known thermophilic and mesophilic TIM structures was conducted in order to understand the higher stability of B. stearothermophilus TIM. Although the ratio Arg/(Arg+Lys) is higher in B. stearothermophilus TIM, the structure comparisons do not directly correlate this higher ratio to the better stability of the B. stearothermophilus enzyme. A higher number of prolines contributes to the higher stability of B. stearothermophilus TIM. Analysis of the known TIM sequences points out that the replacement of a structurally crucial asparagine by a histidine at the interface of monomers, thus avoiding the risk of deamidation and thereby introducing a negative charge at the interface, may be one of the factors for adaptability at higher temperatures in the TIM family. Analysis of buried cavities and the areas lining these cavities also contributes to the greater thermal stability of the B. stearothermophilus enzyme. However, the most outstanding result of the structure comparisons appears to point to the hydrophobic stabilization of dimer formation by burying the largest amount of hydrophobic surface area in B. stearothermophilus TIM compared to all five other known TIM structures.     

The 2.9A resolution crystal structure of malate dehydrogenase from Archaeoglobus fulgidus: mechanisms of oligomerisation and thermal stabilisation

The crystal structure of malate dehydrogenase from the hyperthermophilic archaeon Archeoglobus fulgidus, in complex with its cofactor NAD, was solved at 2.9A resolution. The crystal structure shows a compact homodimer with one coenzyme bound per subunit. The substrate binding site is occupied by a sulphate ion. In order to gain insight into adaptation mechanisms, which allow the protein to be stable and active at high temperatures, the 3D structure was compared to those of several thermostable and hyperthermostable homologues, and to halophilic malate dehydrogenase. The hyperthermostable A. fulgidus MalDH protein displays a reduction of the solvent-exposed surface, an optimised compact hydrophobic core, a high number of hydrogen bonds, and includes a large number of ion pairs at the protein surface. These features occur concomitantly with a reduced number of residues in the protein subunit, due to several deletions in loop regions. The loops are further stiffened by ion pair links with secondary structure elements. A. fulgidus malate dehydrogenase is the only dimeric protein known to date that belongs to the [LDH-like] MalDH family. All the other known members of this family are homo-tetramers. The crystal structures revealed that the association of the dimers to form tetramers is prevented by several deletions, taking place at the level of two loops that are known to be essential for the tetramerisation process within the LDH and [LDH-like] MalDH enzymes.     

The structure and dynamic properties of the complete histidine phosphotransfer domain of the chemotaxis specific histidine autokinase CheA from Thermotoga maritima

The bacterial histidine autokinase CheA contains a histidine phosphotransfer (Hpt) domain that accepts a phosphate from the catalytic domain and donates the phosphate to either target response regulator protein, CheY or CheB. The Hpt domain forms a helix-bundle structure with a conserved four-helix bundle motif and a variable fifth helix. Observation of two nearly equally populated conformations in the crystal structure of a Hpt domain fragment of CheA from Thermotoga maritima containing only the first four helices suggests more mobility in a tightly packed helix bundle structure than previously thought. In order to examine how the structures of Hpt domain homologs may differ from each other particularly in the conformation of the last helix, and whether an alternative conformation exists in the intact Hpt domain in solution, we have solved a high-resolution, solution structure of the CheA Hpt from T. maritima and characterized the backbone dynamics of this protein. The structure contains a four-helix bundle characteristic of histidine phosphotransfer domains. The position and orientation of the fifth helix resembles those in known Hpt domain crystal and solution structures in other histidine kinases. The alternative conformation that was reported in the crystal structure of the CheA Hpt from T. maritima missing the fifth helix is not detected in the solution structure, suggesting a role for the fifth helix in providing stabilizing forces to the overall structure.     

Protein import into and across the mitochondrial inner membrane: role of the TIM23 and TIM22 translocons

Import of nuclear-encoded mitochondrial proteins requires the action of at least two different import machines, called translocons, in the mitochondrial inner membrane (IM). The TIM23 complex mediates the translocation of proteins into the mitochondria matrix, whereas the TIM22 complex is required for the insertion of polytopic proteins into the IM. While the two translocons are distinct and composed of separate subunits, the essential reactions in each complex are carried out by homologous proteins. In addition, the core components of both the TIM23 and TIM22 translocons have been shown to form aqueous pores in the mitochondrial IM. In this review, we summarize what is known about import of proteins across the mitochondrial IM.     

The critical role of the loops of triosephosphate isomerase for its oligomerization,dynamics, and functionality

Triosephosphate isomerase (TIM) catalyzes the reaction to convert dihydroxyacetone phosphate into glyceraldehyde 3‐phosphate, and vice versa. In most organisms, its functional oligomeric state is a homodimer; however, tetramer formation in hyperthermophiles is required for functional activity. The tetrameric TIM structure also provides added stability to the structure, enabling it to function at more extreme temperatures. We apply Principal Component Analysis to find that the TIM structure space is clearly divided into two groups—the open and the closed TIM structures. The distribution of the structures in the open set is much sparser than that in the closed set, showing a greater conformational diversity of the open structures. We also apply the Elastic Network Model to four different TIM structures—an engineered monomeric structure, a dimeric structure from a mesophile—Trypanosoma brucei, and two tetrameric structures from hyperthermophiles Thermotoga maritima and Pyrococcus woesei. We find that dimerization not only stabilizes the structures, it also enhances their functional dynamics. Moreover, tetramerization of the hyperthermophilic structures increases their functional loop dynamics, enabling them to function in the destabilizing environment of extreme temperatures. Computations also show that the functional loop motions, especially loops 6 and 7, are highly coordinated. In summary, our computations reveal the underlying mechanism of the allosteric regulation of the functional loops of the TIM structures, and show that tetramerization of the structure as found in the hyperthermophilic organisms is required to maintain the coordination of the functional loops at a level similar to that in the dimeric mesophilic structure.     

Cloning of triose phosphate isomerase gene from an antarctic psychrophilic <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. by degenerate and splinkerette PCR

Psychrophiles are organisms that thrive in cold environments. One of the strategies for their cold adaptation is the ability to synthesize cold-adapted enzymes. These enzymes usually display higher catalytic efficiency and thermolability at lower temperatures compared to their mesophilic and thermophilic counterparts. In this work, a psychrophilic bacterial isolate codenamed π9 was selected for the cloning of the gene encoding triose phosphate isomerase (TIM), an enzyme in the glycolytic pathway. Based on 16S rRNA gene sequence analysis, this isolate was identified as a species of the genus Pseudomonas under the P. fluorescens group. The cloning of a 816 bp fragment of TIM gene which covers the 756 bp open reading frame was achieved by a combination of degenerate and splinkerette PCRs. The partial sequence of this gene was first PCR amplified by using degenerate primers and the flanking sequences were subsequently amplified by splinkerette PCR technique. Amino acid sequence of the cloned TIM was 97% identical to TIM from Pseudomonas fluorescens and shared 51% identity with the TIM from psychrophilic Vibrio sp. This work demonstrated the use of multiple PCR techniques to clone a gene without prior knowledge of its sequence. The cloning of the TIM gene by PCR was more rapid and cost effective compared to the traditional genomic library construction and screening method. Homology model of the TIM protein in this study was generated based on Escherichia coli TIM crystal structure. The model could serve as a hypothetical TIM structure from a psychrophilic microorganism for further investigation into areas that showed deviations from the known mesophilic TIM structures.     

Structural basis for the function of the ribosomal L7/12 stalk in factor binding and GTPase activation

The L7/12 stalk of the large subunit of bacterial ribosomes encompasses protein L10 and multiple copies of L7/12. We present crystal structures of Thermotoga maritima L10 in complex with three L7/12 N-terminal-domain dimers, refine the structure of an archaeal L10E N-terminal domain on the 50S subunit, and identify these elements in cryo-electron-microscopic reconstructions of Escherichia coli ribosomes. The mobile C-terminal helix alpha8 of L10 carries three L7/12 dimers in T. maritima and two in E. coli, in concordance with the different length of helix alpha8 of L10 in these organisms. The stalk is organized into three elements (stalk base, L10 helix alpha8-L7/12 N-terminal-domain complex, and L7/12 C-terminal domains) linked by flexible connections. Highly mobile L7/12 C-terminal domains promote recruitment of translation factors to the ribosome and stimulate GTP hydrolysis by the ribosome bound factors through stabilization of their active GTPase conformation.     

Lys13 plays a crucial role in the functional adaptation of the thermophilic triose-phosphate isomerase from Bacillus stearothermophilus to high temperatures.

The thermophilic triose-phosphate isomerases (TIMs) of Bacillus stearothermophilus (bTIM) and Thermotoga maritima (tTIM) have been found to possess a His12-Lys13 pair instead of the Asn12-Gly13 pair normally present in mesophilic TIMs. His12 in bTIM was proposed to prevent deamidation at high temperature, while the precise role of Lys13 is unknown. To investigate the role of the His12 and Lys13 pair in the enzyme's thermoadaptation, we reintroduced the "mesophilic residues" Asn and Gly into both thermophilic TIMs. Neither double mutant displayed diminished structural stability, but the bTIM double mutant showed drastically reduced catalytic activity. No similar behavior was observed with the tTIM double mutant, suggesting that the presence of the His12 and Lys13 cannot be systematically correlated to thermoadaptation in TIMs. We determined the crystal structure of the bTIM double mutant complexed with 2-phosphoglycolate to 2.4-A resolution. A molecular dynamics simulation showed that upon substitution of Lys13 to Gly an increase of the flexibility of loop 1 is observed, causing an incorrect orientation of the catalytic Lys10. This suggests that Lys13 in bTIM plays a crucial role in the functional adaptation of this enzyme to high temperature. Analysis of bTIM single mutants supports this assumption.     

Closed conformation of the active site loop of rabbit muscle triosephosphate isomerase in the absence of substrate: evidence of conformational heterogeneity

The active site loop of triosephosphate isomerase (TIM) exhibits a hinged-lid motion, alternating between the two well defined "open" and "closed" conformations. Until now the closed conformation had only been observed in protein complexes with substrate analogues. Here, we present the first rabbit muscle apo TIM structure, refined to 1.5A resolution, in which the active site loop is either in the open or in the closed conformation in different subunits of the enzyme. In the closed conformation described here, the lid loop residues participate in stabilizing hydrogen bonds characteristic of holo TIM structures, whereas chemical interactions observed in the open loop conformation are similar to those found in the apo structures of TIM. In the closed conformation, a number of water molecules are observed at the projected ligand atom positions that are hydrogen bonded to the active site residues. Additives used during crystallization (DMSO and Tris molecules and magnesium atoms) were modeled in the electron density maps. However, no specific binding of these molecules is observed at, or close to, the active site and the lid loop. To further investigate this unusual closed conformation of the apo enzyme, two more rabbit muscle TIM structures, one in the same and another in a different crystal form, were determined. These structures present the open lid conformation only, indicating that the closed conformation cannot be explained by crystal contact effects. To rationalize why the active site loop is closed in the absence of ligand in one of the subunits, extensive comparison with previously solved TIM structures was carried out, supported by the bulk of available experimental information about enzyme kinetics and reaction mechanism of TIM. The observation of both open and closed lid conformations in TIM crystals might be related to a persistent conformational heterogeneity of this protein in solution.