Aggregation of polyQ‐extended proteins is promoted by interaction with their natural coiled‐coil partners

Polyglutamine (polyQ) diseases are genetically inherited neurodegenerative disorders. They are caused by mutations that result in polyQ expansions of particular proteins. Mutant proteins form intranuclear aggregates, induce cytotoxicity and cause neuronal cell death. Protein interaction data suggest that polyQ regions modulate interactions between coiled‐coil (CC) domains. In the case of the polyQ disease spinocerebellar ataxia type‐1 (SCA1), interacting proteins with CC domains further enhance aggregation and toxicity of mutant ataxin‐1 (ATXN1). Here, we suggest that CC partners interacting with the polyQ region of a mutant protein, increase its aggregation while partners that interact with a different region reduce the formation of aggregates. Computational analysis of genetic screens revealed that CC‐rich proteins are highly enriched among genes that enhance pathogenicity of polyQ proteins, supporting our hypothesis. We therefore suggest that blocking interactions between mutant polyQ proteins and their CC partners might constitute a promising preventive strategy against neurodegeneration.     

Cloning,expression and release of native and mutant cloacin DF13 immunity protein

The pCloDF13 encoded immunity protein gene was subcloned in the expression vector pINIIIA1 and several deletion, insertion and point mutations were constructed in the aminoterminal and carboxyl-terminal regions of the protein. The expression, stability, BRP-dependent export and protective capacity of the native and mutant immunity proteins were studied by SDS-PAGE, immunoblotting and an in vivo activity assay. In the absence of cloacin the unbound, native immunity protein was stable produced by E. coli cells and released after BRP induction. The expression of most of the mutant immunity proteins was strongly reduced and non of the proteins were found to be released. All mutations in the carboxyl-terminal region strongly affected expression of the proteins, probably by causing protein instability and proteolytic degradation. One of these mutant immunity proteins, with an insertion mutation in its carboxylterminal region, still caused an intermediate immunity of susceptible cells against extracellularly added cloacin DF13. Mutations in the amino-terminal region of the immunity protein had less effect on its expression and did not affect the protective capacity of the protein.     

A versatile selection system for folding competent proteins using genetic complementation in a eukaryotic host

Recombinant expression of native or modified eukaryotic proteins is pivotal for structural and functional studies and for industrial and pharmaceutical production of proteins. However, it is often impeded by the lack of proper folding. Here, we present a stringent and broadly applicable eukaryotic in vivo selection system for folded proteins. It is based on genetic complementation of the Schizosaccharomyces pombe growth marker gene invertase fused C‐terminally to a protein library. The fusion proteins are directed to the secretion system, utilizing the ability of the eukaryotic protein quality‐control systems to retain misfolded proteins in the ER and redirect them for cytosolic degradation, thereby only allowing folded proteins to reach the cell surface. Accordingly, the folding potential of the tested protein determines the ability of autotrophic colony growth. This system was successfully demonstrated using a complex insertion mutant library of TNF‐α, from which different folding competent mutant proteins were uncovered.     

Mutagenesis by random linker insertion into the lamB gene of Escherichia coli K12

Summary Gene lamB encodes an outer membrane protein involved in maltose and maltodextrin transport as well as phage adsorption. The active form is a trimer. We characterized 11 mutations in lamB, obtained after random insertion of a BamH1 linker and screening for stable immunodetectable mutant proteins. Six mutations resulted in the loss of the distal part of the LamB protein either by deletion (five cases) or frameshift (one case). The six corresponding proteins had all lost the ability to confer phage sensitivity and the capacity to grow on dextrins, and to yield immunnodetectable oligomers. Induction of a high level of the four longest of these proteins was toxic to the cell. Five other mutations were due to in-frame insertions. In four cases, the corresponding proteins still had the ability to yield immunodetectable oligomers, to confer phage sensitivity and the capacity to grow on dextrins and were not toxic on induction. In one case (AJC73), the mutant protein had lost the first three properties and was toxic on induction. Deletions and duplications between some of the inserts were also constructed and studied. To account for our results we present a hypothetical scheme in which trimerization would not only be needed for phage sensitivity and growth on dextrins but also for proper insertion into the outer membrane. The C-terminus of the protein, as well as other regions such as the site of mutation AJC73, would be required for the formation of stable trimers. We tentatively interpret toxicity as due to improper insertion into the outer membrane. Our results also show that it is possible to insert several amino acids (up to 11 in one case) at a number of positions in LamB without appreciably affecting its export and activities.     

A dominant mutation in Escherichia coli OmpR lies within a domain which is highly conserved in a large family of bacterial regulatory proteins

Summary We have fortuitously created an in-frame insertion mutation in the cloned ompR gene of Escherichia coli in the course of an experiment involving linker insertion mutagenesis. According to the DNA sequence, the mutant protein has an insertion at the 53rd amino acid residue, which replaced the original valine, with the sequence Ala-Leu-Glu. The expression level of the mutant protein, OmpRX6, in a minicell system, is similar to that of the wild-type protein and the size of the mutant is slightly larger than the wild type by approxiately 300 daltons. This mutant was completely unable to activate porin expression as the wildtype does, and in addition, this phenotype was shown to be dominant over the wild type. Comparison of the amino acid sequence of OmpRX6 with those of a family of homologous bacterial regulatory proteins revealed that the mutation lies in a domain which is highly conserved among these proteins.     

Metal ions‐binding T4 lysozyme as an intramolecular protein purification tag compatible with X‐ray crystallography

Phage T4 lysozyme is a well folded and highly soluble protein that is widely used as an insertion tag to improve solubility and crystallization properties of poorly behaved recombinant proteins. It has been used in the fusion protein strategy to facilitate crystallization of various proteins including multiple G protein‐coupled receptors, lipid kinases, or sterol binding proteins. Here, we present a structural and biochemical characterization of its novel, metal ions‐binding mutant (mbT4L). We demonstrate that mbT4L can be used as a purification tag in the immobilized‐metal affinity chromatography and that, in many respects, it is superior to the conventional hexahistidine tag. In addition, structural characterization of mbT4L suggests that mbT4L can be used as a purification tag compatible with X‐ray crystallography.     

Identification and Genetic Analysis of a Novel Allelic Variation of <i>Brittle-1</i> with Endosperm Mutant in Maize

Endosperm mutants are critical to the studies on both starch synthesis and metabolism and genetic improvement of starch quality in maize. In the present study, a novel maize endosperm mutant A0178 of natural variation was used as the experimental material and identified and then characterized. Through phenotypic identification, genetic analysis, main ingredients measurement and embryo rescue, development of genetic mapping population from A0178, the endosperm mutant gene was located. The results showed that the mutant exhibited extremely low germination ability as attributed to the inhibited embryo development, and amounts of sugars were accumulated in the mutant seeds and more sugars content was detected at 23 days after pollination (DAP) in A0178 than B73. Employing genetic linkage analysis, the mutant trait was mapped in the bin 5.04 on chromosome 5. Sequence analysis showed that two sites of base transversion and insertion presented in the protein coding region and non-coding region of the mutant brittle-1 (bt1), the adenylate translocator encoding gene involved in the starch synthesis. The single base insertion in the coding region cause frameshift mutation, early termination and lose of function of Brittle-1 (BT1). All results suggested that bt1 is a novel allelic gene and the causal gene of this endosperm mutant, providing insights on the mechanism of endosperm formation in maize.     

Functional analysis of the signal recognition particle in Escherichia coli by characterization of a temperature-sensitive ffh mutant

The Ffh protein of Escherichia coli is a 48-kDa polypeptide that is homologous to the SRP54 subunit of the eukaryotic signal recognition particle (SRP). Efforts to understand the function of Ffh in bacteria have depended largely on the use of E. coli strains that allow depletion of the wild-type gene product. As an alternative approach to studying Ffh, a temperature-sensitive ffh mutant was isolated. The ffh-10(Ts) mutation results in two amino acid changes in conserved regions of the Ffh protein, and characterization of the mutant revealed that the cells rapidly lose viability at the nonpermissive temperature of 42 degrees C as well as show reduced growth at the permissive temperature of 30 degrees C. While the ffh mutant is defective in insertion of inner membrane proteins, the export of proteins with cleavable signal sequences is not impaired. The mutant also shows elevated expression of heat shock proteins and accumulates insoluble proteins, especially at 42 degrees C. It was further observed that the temperature sensitivity of the ffh mutant was suppressed by overproduction of 4.5S RNA, the RNA component of the bacterial SRP, by stabilizing the thermolabile protein. Collectively, these results are consistent with a model in which Ffh is required only for localization of proteins integral to the cytoplasmic membrane and suggest new genetic approaches to the study of how the structure of the SRP contributes to its function.     

Transport and assembly of gag proteins into Moloney murine leukemia virus.

We have studied the process of Moloney murine leukemia virus (M-MuLV) assembly by characterization of core (gag) protein mutants and analysis of wild-type (wt) gag proteins produced by cells in the presence of the ionophore monensin. Our genetic studies involved examination of linker insertion mutants of a Gag-beta-galactosidase (Gag-beta-gal) fusion protein, GBG2051, which is incorporated into virus particles when expressed in the presence of wt viral proteins. Analysis indicated that the amino-terminal two-thirds of the gag matrix domain is essential for targeting of proteins to the plasma membrane; mutant proteins localized to the cytoplasm or were trapped on intracellular membranes. Mutations through most of the coding region of the gag capsid domain generated proteins which were released from cells in membrane vesicles but not in virions. In contrast, linker insertions into p12gag or carboxy-terminal portions of the matrix or capsid coding regions did not affect assembly of fusion proteins into virus particles. Monensin, which blocks vesicular transport, inhibited gag protein intracellular transport and release from cells. Our results suggest that a significant proportion of M-MuLV myristylated gag proteins travel via vesicles to the cell surface. Specific matrix protein polypeptide regions and myristic acid modification are both necessary for appropriate gag protein transport, while capsid protein interactions appear to mediate the final phase of virion formation.     

Insertional mutagenesis and promoter trapping in plants for the isolation of genes and the study of development

Insertional mutagenesis, whether by transposable elements or T-DNAs fromAgrobacterium tumefaciens, provides a powerful experimental strategy to investigate the genetic basis of plant growth, metabolism and development. The linkage of an insertion element with a mutant phenotype of interest greatly facilitates the isolation of the wild-type gene. A further refinement of this strategy is the incorporation of promoter traps or enhancer traps into the insertion elements. These can act as functional tags of regulatory elements associated with genes in the host genome, potentially can improve further the efficiency of screening for target mutant phenotypes, and may provide valuable markers of specific cell types for developmental analysis. We discuss the use of these techniques to study the molecular genetics of plant development.     

Silent and functional changes in the periplasmic maltose-binding protein of Escherichia coli K12. I. Transport of maltose

The malE gene encodes the periplasmic maltose-binding protein (MBP). Nineteen mutations that still permit synthesis of stable MBP were generated by random insertion of a BamHI octanucleotide into malE and six additional mutations by in-vitro recombinations between mutant genes. The sequence changes were determined; in most cases the linker insertion is accompanied by a small deletion (30 base-pairs on average). The mutant MBP were studied for export, growth on maltose and maltodextrins, maltose transport and binding, and maltose-induced fluorescence changes. Sixteen mutant MBP (out of 21 studied in detail) were found in the periplasmic space: 12 of them retained a high affinity for maltose, and 10 activity for growth on maltose. The results show that several regions of MBP are dispensable for stability, substrate binding and export. Three regions (residues 207 to 220, 297 to 303 and 364 to 370) may be involved in interactions with the MalF or MalG proteins. A region near the C-terminal end is important for maltose binding. Two regions of the mature protein (residues 18 to 42 and 280 to 296) are required for export to, or solubility in, the periplasm.     

Aggregation of prion protein with insertion mutations is proportional to the number of inserts

Mutation in the prion gene, PRNP, accounts for approx. 10-15% of human prion diseases. However, little is known about the mechanisms by which a mutant prion protein (PrP) causes disease. We compared the biochemical properties of a wild-type human prion protein, rPrP(C) (recombinant wild-type PrP), which has five octapeptide-repeats, with two recombinant human prion proteins with insertion mutations, one with three more octapeptide repeats, rPrP(8OR), and the other with five more octapeptide repeats, rPrP(10OR). We found that the insertion mutant proteins are more prone to aggregate, and the degree and kinetics of aggregation are proportional to the number of inserts. The octapeptide-repeat and alpha-helix 1 regions are important in aggregate formation, because aggregation is inhibited with monoclonal antibodies that are specific for epitopes in these regions. We also showed that a small amount of mutant protein could enhance the formation of mixed aggregates that are composed of mutant protein and wild-type rPrP(C). Accordingly, rPrP(10OR) is also more efficient in promoting the aggregation of rPrP(C) than rPrP(8OR). These findings provide a biochemical explanation for the clinical observations that the severity of the disease in patients with insertion mutations is proportional to the number of inserts, and thus have implications for the pathogenesis of inherited human prion disease.     

Genetically engineered mutants of the envelope protein of the RNA-containing bacteriophage

Expression of the coat protein gene of RNA bacteriophage fr in Escherichia coli cells leads to the formation of capsid-like structures of ca. 25 nm in diameter, which are immunologically indistinguishable from the native phage fr capsids. The modification strategy of the coat protein gene by gene engineering technique was developed in order to localize coat protein regions, which are exposed on the capsid surface and are capable to include foreign amino acid inserts without an appreciable effect on the capsid self-assembly. The oligonucleotide linkers, coding short amino acid sequences and bearing also convenient restriction sites, were synthesized and inserted into different regions of the coat protein gene. The mutant proteins, containing insertions of 2-12 amino acids in potentially exposed regions, were obtained. It was shown that N- and C-terminal insertions, as well as the insertion into codon 51 in the RNA-binding region, do not prevent the self-assembly. The regions (codons 96 and 112) were also revealed, insertions in them decreased drastically the protein yield as a consequence of a block in the self-assembly.     

The Chloroplast Function Database: a large‐scale collection of Arabidopsis Ds/Spm‐ or T‐DNA‐tagged homozygous lines for nuclear‐encoded chloroplast proteins,and their systematic phenotype analysis

A majority of the proteins of the chloroplast are encoded by the nuclear genome, and are post‐translationally targeted to the chloroplast. From databases of tagged insertion lines at international seed stock centers and our own stock, we selected 3246 Ds/Spm (dissociator/suppressor–mutator) transposon‐ or T‐DNA‐tagged Arabidopsis lines for genes encoding 1369 chloroplast proteins (about 66% of the 2090 predicted chloroplast proteins) in which insertions disrupt the protein‐coding regions. We systematically observed 3‐week‐old seedlings grown on agar plates, identified mutants with abnormal phenotypes and collected homozygous lines with wild‐type phenotypes. We also identified insertion lines for which no homozygous plants were obtained. To date, we have identified 111 lines with reproducible seedling phenotypes, 122 lines for which we could not obtain homozygotes and 1290 homozygous lines without a visible phenotype. The Chloroplast Function Database presents the molecular and phenotypic information obtained from this resource. The database provides tools for searching for mutant lines using Arabidopsis Genome Initiative (AGI) locus numbers, tagged line numbers and phenotypes, and provides rapid access to detailed information on the tagged line resources. Moreover, our collection of insertion homozygotes provides a powerful tool to accelerate the functional analysis of nuclear‐encoded chloroplast proteins in Arabidopsis. The Chloroplast Function Database is freely available at http://rarge.psc.riken.jp/chloroplast/ . The homozygous lines generated in this project are also available from the various Arabidopsis stock centers. We have donated the insertion homozygotes to their originating seed stock centers.     

A method for rapid mapping of mutations by plasmid rescue strategy inSaccharomyces cerevisiae

The products ofPRP17 andPRP18 genes are required for the second step of pre-mRNA splicing reactions inSaccharomyces cerevisiae. Temperature-sensitive mutants at either of these loci accumulate products of the first splicing reaction at nonpermissive temperature. To characterize functional regions in these proteins the mutations in three temperature-sensitive alleles ofPRP17 and two temperature-sensitive alleles ofPRP18 were mapped by the plasmid rescue strategy, One of the procedures adopted in the past is plasmid rescue of the mutant allele followed by sequencing of the entire gene. In this work we describe an adaptation of the above procedure that allows, first, rapid mapping of chromosomal segments bearing the mutations, followed by sequence characterization of the minimal segment. The strategy adopted was to integrate a wild-type copy of the gene at the homologous mutant chromosomal locus, followed by recovery of the chromosomal fragments from these integrants as plasmids inE. coli. The recovered plasmids were screened by a complementation assay for those that contained in them the chromosomal mutation. The mutations in all the three alleles ofPRP17 map to a small region in the N-terminal half of the protein, whereas the temperature-sensitive mutations in the two alleles ofPRP18 map to different regions of the PRP18 protein. The recovered mutant plasmids from all five alleles at the two loci were sequenced and the nucleotide changes were found to result in missense mutations in each case. Our strategy is therefore a rapid method to map chromosomal mutations and is of general use in structure-function analysis of cloned genes.     

Optimized BlaM-transposon shuttle mutagenesis of Helicobacter pylori allows the identification of novel genetic loci involved in bacterial virulence

Helicobacter pylori is an important etiologic agent of gastroduodenal disease in humans. In this report, we describe a general genetic approach for the identification of genes encoding exported proteins in H. pylori. The novel TnMax9 mini-blaM transposon was used for insertion mutagenesis of a H. pylori gene library established in Escherichia coli. A total of 192 E. coli clones expressing active β-lactamase fusion proteins (BlaM⁺) were obtained, indicating that the corresponding target plasmids carry H. pylori genes encoding putative extracytoplasmic proteins. Natural transformation of H. pylori P1 or P12 using the 192 mutant plasmids resulted in 135 distinct H. pylori mutant strains (70%). Screening of the H. pylori collection of mutant strains allowed the identification of mutant strains impaired in motility, in natural transformation competence and in adherence to gastric epithelial cell lines. Motility mutants could be grouped into distinct classes: (i) mutant strains lacking the major flagellin subunit FlaA and intact flagella (class I); (ii) mutant strains with apparently normal flagella, but reduced motility (class II), and (iii) mutant strains with obviously normal flagella, but completely abolished motility (class III). Two independent mutations that exhibited defects in natural competence for genetic transformation mapped to different genetic loci. In addition, two independent mutant strains were isolated by their failure to bind to the human gastric carcinoma cell line Katoill. Both mutant strains carried a transposon in the same gene, 0.8 kb apart, and showed decreased autoagglutination when compared to the wild-type strain.