Y3+ block demonstrates an intracellular activation gate for the alpha1G T-type Ca2+ channel

Classical electrophysiology and contemporary crystallography suggest that the activation gate of voltage-dependent channels is on the intracellular side, but a more extracellular "pore gate" has also been proposed. We have used the voltage dependence of block by extracellular Y(3+) as a tool to locate the activation gate of the alpha1G (Ca(V)3.1) T-type calcium channel. Y(3+) block exhibited no clear voltage dependence from -40 to +40 mV (50% block at 25 nM), but block was relieved rapidly by stronger depolarization. Reblock of the open channel, reflected in accelerated tail currents, was fast and concentration dependent. Closed channels were also blocked by Y(3+) at a concentration-dependent rate, only eightfold slower than open-channel block. When extracellular Ca(2+) was replaced with Ba(2+), the rate of open block by Y(3+) was unaffected, but closed block was threefold faster than in Ca(2+), suggesting the slower closed-block rate reflects ion-ion interactions in the pore rather than an extracellularly located gate. Since an extracellular blocker can rapidly enter the closed pore, the primary activation gate must be on the intracellular side of the selectivity filter.     

Voltage-controlled gating at the intracellular entrance to a hyperpolarization-activated cation channel.

Hyperpolarization-activated cation (HCN) channels regulate pacemaking activity in cardiac cells and neurons. Our previous work using the specific HCN channel blocker ZD7288 provided evidence for an intracellular activation gate for these channels because it appears that ZD7288, applied from the intracellular side, can enter and leave HCN channels only at voltages where the activation gate is opened (Shin, K.S., B.S. Rothberg, and G. Yellen. 2001. J. Gen. Physiol. 117:91-101). However, the ZD7288 molecule is larger than the Na(+) or K(+) ions that flow through the open channel. In the present study, we sought to resolve whether the voltage gate at the intracellular entrance to the pore for ZD7288 also can be a gate for permeant ions in HCN channels. Single residues in the putative pore-lining S6 region of an HCN channel (cloned from sea urchin; spHCN) were substituted with cysteines, and the mutants were probed with Cd(2+) applied to the intracellular side of the channel. One mutant, T464C, displayed rapid irreversible block when Cd(2+) was applied to opened channels, with an apparent blocking rate of approximately 3 x 10(5) M(-1)s(-1). The blocking rate was decreased for channels held at more depolarized voltages that close the channels, which is consistent with the Cd(2+) access to this residue being gated from the intracellular side of the channel. 464C channels could be recovered from Cd(2+) inhibition in the presence of a dithiol applied to the intracellular side. The rate of this recovery also was reduced when channels were held at depolarized voltages. Finally, Cd(2+) could be trapped inside channels that were composed of WT/464C tandem-linked subunits, which could otherwise recover spontaneously from Cd(2+) inhibition. Thus, Cd(2+) escape is also gated at the intracellular side of the channel. Together, these results are consistent with a voltage-controlled structure at the intracellular side of the spHCN channel that can gate the flow of cations through the pore.     

Epithelial sodium channel pore region. structure and role in gating

Epithelial sodium channels (ENaC) have a crucial role in the regulation of extracellular fluid volume and blood pressure. To study the structure of the pore region of ENaC, the susceptibility of introduced cysteine residues to sulfhydryl-reactive methanethiosulfonate derivatives ((2-aminoethyl)methanethiosulfonate hydrobromide (MTSEA) and [(2-(trimethylammonium)ethyl]methanethiosulfonate bromide (MTSET)) and to Cd(2+) was determined. Selected mutants within the amino-terminal portion (alphaVal(569)-alphaTrp(582)) of the pore region responded to MTSEA, MTSET, or Cd(2+) with stimulation or inhibition of whole cell Na(+) current. The reactive residues were not contiguous but were separated by 2-3 residues where substituted cysteine residues did not respond to the reagents and line one face of an alpha-helix. The activation of alphaS580Cbetagamma mENaC by MTSET was associated with a large increase in channel open probability. Within the carboxyl-terminal portion (alphaSer(583)-alphaSer(592)) of the pore region, only one mutation (alphaS583C) conferred a rapid, nearly complete block by MTSEA, MTSET, and Cd(2+), whereas several other mutant channels were partially blocked by MTSEA or Cd(2+) but not by MTSET. Our data suggest that the outer pore of ENaC is formed by an alpha-helix, followed by an extended region that forms a selectivity filter. Furthermore, our data suggest that the pore region participates in ENaC gating.     

Minimal structural rearrangement of the cytoplasmic pore during activation of the 5-HT3A receptor

Ligand-gated ion channel receptors mediate the response of fast neurotransmitters by opening in less than a millisecond. Here, we investigated the activation mechanism of a serotonin-gated receptor (5-HT(3A)) by systematically introducing cysteine substitutions throughout the pore-lining M1-M2 loop and M2 transmembrane domain. We hypothesized that multiple cysteines in the narrowest region of the pore, which together can form a high affinity binding site for metal cations, would reveal changes in pore structure during gating. Using cadmium (Cd2+) as a probe, two cysteine substitutions in the cytoplasmic selectivity filter, S2'C and, to a lesser extent, G-2'C, showed high affinity inhibition with Cd2+ when applied extracellularly in the open state. Cd2+ inhibition in S2'C was attenuated if applied in the presence of an open-channel inhibitor and showed voltage-dependent recovery, indicating a direct effect of Cd2+ in the pore. When applied intracellularly, Cd2+ appeared to bind S2'C receptors in the closed state. The ability of cysteine side chains at the 2' and -2' positions to coordinate Cd2+ in both the native open and closed states of the channel suggests that the cytoplasmic selectivity filter of 5-HT(3A) receptors maintains a narrow pore during channel gating.     

Topology of the P segments in the sodium channel pore revealed by cysteine mutagenesis.

The P segments of the voltage-dependent Na+ channel line the outer mouth and selectivity filter of the pore. The residues that form the cytoplasmic mouth of the pore of the channel have not been identified. To study the structure of the inner pore mouth, the presumed selectivity filter residues (D400, E755, K1237, and A1529), and three amino acids just amino-terminal to each of these residues in the rat skeletal muscle Na+ channel, were mutated to cysteine and expressed in tsA 201 cells. These amino acids are predicted (by analogy to K+ channels) to be on the cytoplasmic side of the putative selectivity filter residues. Inward and outward Na+ currents were measured with the whole-cell configuration of the patch-clamp technique. Cysteinyl side-chain accessibility was gauged by sensitivity to Cd2+ block and by reactivity with methanethiosulfonate (MTS) reagents applied to both the inside and the outside of the cell. Outward currents through the wild-type and all of the mutant channels were unaffected by internal Cd2+ (100 microM). Similarly, 1 mM methanethiosulfonate ethylammonium (MTSEA) applied to the inside of the membrane did not affect wild-type or mutant outward currents. However, two mutants amino-terminal to the selectivity position in domain III (F1236C and T1235C) and one in domain IV (S1528C) were blocked with high affinity by external Cd2+. The Na+ current through F1236C and S1528C channels was inhibited by MTSEA applied to the outside of the cell. The accessibility of these mutants to externally applied cysteinyl ligands indicates that the side chains of the mutated residues face outward rather than inward. The K+ channel model of the P segments as protein loops that span the selectivity region is not applicable to the Na+ channel.     

Tail end of the s6 segment: role in permeation in shaker potassium channels

The permeation pathway in voltage-gated potassium channels has narrow constrictions at both the extracellular and intracellular ends. These constrictions might limit the flux of cations from one side of the membrane to the other. The extracellular constriction is the selectivity filter, whereas the intracellular bundle crossing is proposed to act as the activation gate that opens in response to a depolarization. This four-helix bundle crossing is composed of S6 transmembrane segments, one contributed by each subunit. Here, we explore the cytoplasmic extension of the S6 transmembrane segment of Shaker potassium channels, just downstream from the bundle crossing. We substituted cysteine for each residue from N482 to T489 and determined the amplitudes of single channel currents and maximum open probability (P(o,max)) at depolarized voltages using nonstationary noise analysis. One mutant, F484C, significantly reduces P(o,max), whereas Y483C, F484C, and most notably Y485C, reduce single channel conductance (gamma). Mutations of residue Y485 have no effect on the Rb(+)/K(+) selectivity, suggesting a local effect on gamma rather than an allosteric effect on the selectivity filter. Y485 mutations also reduce pore block by tetrabutylammonium, apparently by increasing the energy barrier for blocker movement through the open activation gate. Replacing Rb(+) ions for K(+) ions reduces the amplitude of single channel currents and makes gamma insensitive to mutations of Y485. These results suggest that Rb(+) ions increase an extracellular energy barrier, presumably at the selectivity filter, thus making it rate limiting for flux of permeant ions. These results indicate that S6(T) residues have an influence on the conformation of the open activation gate, reflected in both the stability of the open state and the energy barriers it presents to ions.     

Tight steric closure at the intracellular activation gate of a voltage-gated K(+) channel.

In voltage-gated K(+) channels (Kv), an intracellular gate regulates access from the cytoplasm to the pore by organic channel blockers and by chemical modifiers. But is ion flow itself controlled instead by constriction of the narrow selectivity filter near the extracellular surface? We find that the intracellular gate of Kv channels is capable of regulating access even by the small cations Cd(2+) and Ag(+). It can also exclude small neutral or negatively charged molecules, indicating that the gate operates by steric exclusion rather than electrostatically. Just intracellular to the gated region, channel closure does not restrict access even to very large reagents. Either these Kv channels have a broader inner entrance than seen in the KcsA crystal, even in the closed state, or the region is highly flexible (but nevertheless remains very securely closed nearby).     

Localization of the activation gate of a voltage-gated Ca2+ channel

Ion channels open and close in response to changes in transmembrane voltage or ligand concentration. Recent studies show that K+ channels possess two gates, one at the intracellular end of the pore and the other at the selectivity filter. In this study we determined the location of the activation gate in a voltage-gated Ca2+ channel (VGCC) by examining the open/closed state dependence of the rate of modification by intracellular methanethiosulfonate ethyltrimethylammonium (MTSET) of pore-lining cysteines engineered in the S6 segments of the alpha1 subunit of P/Q type Ca2+ channels. We found that positions above the putative membrane/cytoplasm interface, including two positions below the corresponding S6 bundle crossing in K+ channels, showed pronounced state-dependent accessibility to internal MTSET, reacting approximately 1,000-fold faster with MTSET in the open state than in the closed state. In contrast, a position at or below the putative membrane/cytoplasm interface was modified equally rapidly in both the open and closed states. Our results suggest that the S6 helices of the alpha1 subunit of VGCCs undergo conformation changes during gating and the activation gate is located at the intracellular end of the pore.     

Control of electrical activity in central neurons by modulating the gating of small conductance Ca2+-activated K+ channels

In most central neurons, action potentials are followed by an afterhyperpolarization (AHP) that controls firing pattern and excitability. The medium and slow components of the AHP have been ascribed to the activation of small conductance Ca(2+)-activated potassium (SK) channels. Cloned SK channels are heteromeric complexes of SK alpha-subunits and calmodulin. The channels are activated by Ca(2+) binding to calmodulin that induces conformational changes resulting in channel opening, and channel deactivation is the reverse process brought about by dissociation of Ca(2+) from calmodulin. Here we show that SK channel gating is effectively modulated by 1-ethyl-2-benzimidazolinone (EBIO). Application of EBIO to cloned SK channels shifts the Ca(2+) concentration-response relation into the lower nanomolar range and slows channel deactivation by almost 10-fold. In hippocampal CA1 neurons, EBIO increased both the medium and slow AHP, strongly reducing electrical activity. Moreover, EBIO suppressed the hyperexcitability induced by low Mg(2+) in cultured cortical neurons. These results underscore the importance of SK channels for shaping the electrical response patterns of central neurons and suggest that modulating SK channel gating is a potent mechanism for controlling excitability in the central nervous system.     

A helical region in the C terminus of small-conductance Ca2+-activated K+ channels controls assembly with apo-calmodulin.

Small conductance Ca(2+)-activated potassium (SK) channels underlie the afterhyperpolarization that follows the action potential in many types of central neurons. SK channels are voltage-independent and gated solely by intracellular Ca(2+) in the submicromolar range. This high affinity for Ca(2+) results from Ca(2+)-independent association of the SK alpha-subunit with calmodulin (CaM), a property unique among the large family of potassium channels. Here we report the solution structure of the calmodulin binding domain (CaMBD, residues 396-487 in rat SK2) of SK channels using NMR spectroscopy. The CaMBD exhibits a helical region between residues 423-437, whereas the rest of the molecule lacks stable overall folding. Disruption of the helical domain abolishes constitutive association of CaMBD with Ca(2+)-free CaM, and results in SK channels that are no longer gated by Ca(2+). The results show that the Ca(2+)-independent CaM-CaMBD interaction, which is crucial for channel function, is at least in part determined by a region different in sequence and structure from other CaM-interacting proteins.     

Side chain orientation in the selectivity filter of a voltage-gated Ca2+ channel

Four glutamate residues (EEEE locus) are essential for ion selectivity in voltage-gated Ca(2+) channels, with ion-specific differences in binding to the locus providing the basis of selectivity. Whether side chain carboxylates or alternatively main chain carbonyls of these glutamates project into the pore to form the ion-binding locus has been uncertain. We have addressed this question by examining effects of sulfhydryl-modifying agents (methanethiosulfonates) on 20 cysteine-substituted mutant forms of an L-type Ca(2+) channel. Sulfhydryl modifiers partially blocked whole oocyte Ba(2+) currents carried by wild type channels, but this block was largely reversed with washout. In contrast, each of the four EEEE locus glutamate --> cysteine mutants (0 position) was persistently blocked by sulfhydryl modifiers, indicating covalent attachment of a modifying group to the side chain of the substituted cysteine. Cysteine substitutions at positions immediately adjacent to the EEEE locus glutamates (+/-1 positions) were also generally susceptible to sulfhydryl modification. Sulfhydryl modifiers had lesser effects on channels substituted one position further from the EEEE locus (+/-2 positions). These results indicate that the carboxylate-bearing side chains of the EEEE locus glutamates and their immediate neighbors project into the water-filled lumen of the pore to form an ion-binding locus. Thus the structure of the Ca(2+) channel selectivity filter differs substantially from that of ancestral K(+) channels.     

Block of tetrodotoxin-resistant Na+ channel pore by multivalent cations: gating modification and Na+ flow dependence

Tetrodotoxin-resistant (TTX-R) Na(+) channels are much less susceptible to external TTX but more susceptible to external Cd(2+) block than tetrodotoxin-sensitive (TTX-S) Na(+) channels. Both TTX and Cd(2+) seem to block the channel near the "DEKA" ring, which is probably part of a multi-ion single-file region adjacent to the external pore mouth and is involved in the selectivity filter of the channel. In this study we demonstrate that other multivalent transitional metal ions such as La(3+), Zn(2+), Ni(2+), Co(2+), and Mn(2+) also block the TTX-R channels in dorsal root ganglion neurons. Just like Cd(2+), the blocking effect has little intrinsic voltage dependence, but is profoundly influenced by Na(+) flow. The apparent dissociation constants of the blocking ions are always significantly smaller in inward Na(+) currents than those in outward Na(+) current, signaling exit of the blocker along with the Na(+) flow and a high internal energy barrier for "permeation" of these multivalent blocking ions through the pore. Most interestingly, the activation and especially the inactivation kinetics are slowed by the blocking ions. Moreover, the gating changes induced by the same concentration of a blocking ion are evidently different in different directions of Na(+) current flow, but can always be correlated with the extent of pore block. Further quantitative analyses indicate that the apparent slowing of channel activation is chiefly ascribable to Na(+) flow-dependent unblocking of the bound La(3+) from the open Na(+) channel, whereas channel inactivation cannot happen with any discernible speed in the La(3+)-blocked channel. Thus, the selectivity filter of Na(+) channel is probably contiguous to a single-file multi-ion region at the external pore mouth, a region itself being nonselective in terms of significant binding of different multivalent cations. This region is "open" to the external solution even if the channel is "closed" ("deactivated"), but undergoes imperative conformational changes during the gating (especially the inactivation) process of the channel.     

Status of the intracellular gate in the activated-not-open state of shaker K+ channels

Voltage-dependent K⁺ channels like Shaker use an intracellular gate to control ion flow through the pore. When the membrane voltage becomes more positive, these channels traverse a series of closed conformations before the final opening transition. Does the intracellular gate undergo conformational changes before channel opening? To answer this question we introduced cysteines into the intracellular end of the pore and studied their chemical modification in conditions favoring each of three distinct states, the open state, the resting closed state, and the activated-not-open state (the closed state adjacent to the open state). We used two independent ways to isolate the channels in the activated-not-open state. First, we used mutations in S4 (ILT; Smith-Maxwell, C.J., J.L. Ledwell, and R.W. Aldrich. 1998. J. Gen. Physiol. 111:421–439; Ledwell, J.L., and R.W. Aldrich. 1999. J. Gen. Physiol. 113:389–414) that separate the final opening step from earlier charge-movement steps. Second, we used the open channel blocker 4-aminopyridine (4-AP), which has been proposed to promote closure of the intracellular gate and thus specifically to stabilize the activated-not-open state of the channels. Supporting this proposed mechanism, we found that 4-AP enters channels only after opening, remaining trapped in closed channels, and that in the open state it competes with tetraethylammonium for binding. Using these tools, we found that in the activated-not-open state, a cysteine located at a position considered to form part of the gate (Shaker 478) showed higher reactivity than in either the open or the resting closed states. Additionally, we have found that in this activated state the intracellular gate continued to prevent access to the pore by molecules as small as Cd²⁺ ions. Our results suggest that the intracellular opening to the pore undergoes some rearrangements in the transition from the resting closed state to the activated-not-open state, but throughout this process the intracellular gate remains an effective barrier to the movement of potassium ions through the pore.     

Relative Movements of Transmembrane Regions at the Outer Mouth of the Cystic Fibrosis Transmembrane Conductance Regulator Channel Pore during Channel Gating

Multiple transmembrane (TM) segments line the pore of the cystic fibrosis transmembrane conductance regulator Cl(-) channel; however, the relative alignment of these TMs and their relative movements during channel gating are unknown. To gain three-dimensional structural information on the outer pore, we have used patch clamp recording to study the proximity of pairs of cysteine side chains introduced into TMs 6 and 11, using both disulfide cross-linking and Cd(2+) coordination. Following channel activation, disulfide bonds could apparently be formed between three cysteine pairs (of 15 studied): R334C/T1122C, R334C/G1127C, and T338C/S1118C. To examine the state dependence of cross-linking, we combined these cysteine mutations with a nucleotide-binding domain mutation (E1371Q) that stabilizes the channel open state. Investigation of the effects of the E1371Q mutation on disulfide bond formation and Cd(2+) coordination suggests that although R334C/T1122C and T338C/S1118C are closer together in the channel open state, R334C/G1127C are close together and can form disulfide bonds only when the channel is closed. These results provide important new information on the three-dimensional structure of the outer mouth of the cystic fibrosis transmembrane conductance regulator channel pore: TMs 6 and 11 are close enough together to form disulfide bonds in both open and closed channels. Moreover, the altered relative locations of residues in open and in closed channels that we infer allow us to propose that channel opening and closing may be associated with a relative translational movement of TMs 6 and 11, with TM6 moving "down" (toward the cytoplasm) during channel opening.     

Asp433 in the closing gate of ASIC1 determines stability of the open state without changing properties of the selectivity filter or Ca2+ block

A constriction formed by the crossing of the second transmembrane domains of ASIC1, residues G432 to G436, forms the narrowest segment of the pore in the crystal structure of chicken ASIC1, presumably in the desensitized state, suggesting that it constitutes the "desensitization gate" and the "selectivity filter." Residues Gly-432 and Asp-433 occlude the pore, preventing the passage of ions from the extracellular side. Here, we examined the role of Asp-433 and Gly-432 in channel kinetics, ion selectivity, conductance, and Ca(2+) block in lamprey ASIC1 that is a channel with little intrinsic desensitization in the pH range of maximal activity, pH 7.0. The results show that the duration of open times depends on residue 433, with Asp supporting the longest openings followed by Glu, Gln, or Asn, whereas other residues keep the channel closed. This is consistent with residue Asp-433 forming the pore's closing gate and the properties of the side chain either stabilizing (hydrophobic amino acids) or destabilizing (Asp) the gate. The data also show residue 432 influencing the duration of openings, but here only Gly and Ala support long openings, whereas all other residues keep channels closed. The negative charge of Asp-433 was not required for block of the open pore by Ca(2+) or for determining ion selectivity and unitary conductance. We conclude that the conserved residue Asp-433 forms the closing gate of the pore and thereby determines the duration of individual openings while desensitization, defined as the permanent closure of all or a fraction of channels by the continual presence of H(+), modulates the on or off position of the closing gate. The latter effect depends on less conserved regions of the channel, such as TM1 and the extracellular domain. The constriction made by Asp-433 and Gly-432 does not select for ions in the open conformation, implying that the closing gate and selectivity filter are separate structural elements in the ion pathway of ASIC1. The results also predict a significantly different conformation of TM2 in the open state that relieves the constriction made by TM2, allowing the passage of ions unimpeded by the side chain of Asp-433.     

Selectivity filter gating in large-conductance Ca(2+)-activated K+ channels

Membrane voltage controls the passage of ions through voltage-gated K (K(v)) channels, and many studies have demonstrated that this is accomplished by a physical gate located at the cytoplasmic end of the pore. Critical to this determination were the findings that quaternary ammonium ions and certain peptides have access to their internal pore-blocking sites only when the channel gates are open, and that large blocking ions interfere with channel closing. Although an intracellular location for the physical gate of K(v) channels is well established, it is not clear if such a cytoplasmic gate exists in all K(+) channels. Some studies on large-conductance, voltage- and Ca(2+)-activated K(+) (BK) channels suggest a cytoplasmic location for the gate, but other findings question this conclusion and, instead, support the concept that BK channels are gated by the pore selectivity filter. If the BK channel is gated by the selectivity filter, the interactions between the blocking ions and channel gating should be influenced by the permeant ion. Thus, we tested tetrabutyl ammonium (TBA) and the Shaker "ball" peptide (BP) on BK channels with either K(+) or Rb(+) as the permeant ion. When tested in K(+) solutions, both TBA and the BP acted as open-channel blockers of BK channels, and the BP interfered with channel closing. In contrast, when Rb(+) replaced K(+) as the permeant ion, TBA and the BP blocked both closed and open BK channels, and the BP no longer interfered with channel closing. We also tested the cytoplasmically gated Shaker K channels and found the opposite behavior: the interactions of TBA and the BP with these K(v) channels were independent of the permeant ion. Our results add significantly to the evidence against a cytoplasmic gate in BK channels and represent a positive test for selectivity filter gating.     

Gating dependence of inner pore access in inward rectifier K(+) channels

Cation channel gating may occur either at or below the inner vestibule entrance or at the selectivity filter. To differentiate these possibilities in inward rectifier (Kir) channels, we examined cysteine accessibility in the ATP-gated Kir6.2 channel. MTSEA and MTSET both block channels and modify M2 cysteines with identical voltage dependence. If entry is restricted to open channels, modification rates will slow in ATP-closed channels, but because the reagent can be trapped in the pore following brief openings, this may not be apparent until open probability is extremely low (<0.01). When these conditions are met, modification does slow significantly, indicating gated access and highlighting an important caveat for interpretation of MTS-accessibility measurements: reagent "trapping" in nominally "closed" channels may obscure gated access.     

The polyamine binding site in inward rectifier K+ channels

Strongly inwardly rectifying potassium channels exhibit potent and steeply voltage-dependent block by intracellular polyamines. To locate the polyamine binding site, we have examined the effects of polyamine blockade on the rate of MTSEA modification of cysteine residues strategically substituted in the pore of a strongly rectifying Kir channel (Kir6.2[N160D]). Spermine only protected cysteines substituted at a deep location in the pore, between the "rectification controller" residue (N160D in Kir6.2, D172 in Kir2.1) and the selectivity filter, against MTSEA modification. In contrast, blockade with a longer synthetic polyamine (CGC-11179) also protected cysteines substituted at sites closer to the cytoplasmic entrance of the channel. Modification of a cysteine at the entrance to the inner cavity (169C) was unaffected by either spermine or CGC-11179, and spermine was clearly "locked" into the inner cavity (i.e., exhibited a dramatically slower exit rate) following modification of this residue. These data provide physical constraints on the spermine binding site, demonstrating that spermine stably binds at a deep site beyond the "rectification controller" residue, near the extracellular entrance to the channel.     

Movements near the gate of a hyperpolarization-activated cation channel

Hyperpolarization-activated cation (HCN) channels regulate pacemaking activity in cardiac cells and neurons. Like the related depolarization-activated K+ channels (Kv channels), HCN channels use an intracellular activation gate to regulate access to an inner cavity, lined by the S6 transmembrane regions, which leads to the selectivity filter near the extracellular surface. Here we describe two types of metal interactions with substituted cysteines in the S6, which alter the voltage-controlled movements of the gate. At one position (L466), substitution of cysteine in all four subunits allows Cd2+ ions at nanomolar concentration to stabilize the open state (a "lock-open" effect). This effect depends on native histidines at a nearby position (H462); the lock-open effect can be abolished by changing the histidines to tyrosines, or enhanced by changing them to cysteines. Unlike a similar effect in Kv channels, this effect depends on a Cd2+ bridge between 462 and 466 in the same subunit. Cysteine substitution at another position (Q468) produces two effects of Cd2+: both a lock-open effect and a dramatic slowing of channel activation-a "lock-closed" effect. The two effects can be separated, because the lock-open effect depends on the histidine at position 462. The novel lock-closed effect results from stabilization of the closed state by the binding of up to four Cd2+ ions. During the opening conformational change, the S6 apparently moves from one position in which the 468C cysteines can bind four Cd2+ ions, possibly as a cluster of cysteines and cadmium ions near the central axis of the pore, to another position (or flexible range of positions) where either 466C or 468C can bind Cd2+ in association with the histidine at 462.