Systems metabolic engineering of Corynebacterium glutamicum for high-level production of 1,3-propanediol from glucose and xylose

Corynebacterium glutamicum is a versatile chassis which has been widely used to produce various amino acids and organic acids. In this study, we report the development of an efficient C. glutamicum strain to produce 1,3-propanediol (1,3-PDO) from glucose and xylose by systems metabolic engineering approaches, including (1) construction and optimization of two different glycerol synthesis modules; (2) combining glycerol and 1,3-PDO synthesis modules; (3) reducing 3-hydroxypropionate accumulation by clarifying a mechanism involving 1,3-PDO re-consumption; (4) reducing the accumulation of toxic 3-hydroxypropionaldehyde by pathway engineering; (5) engineering NADPH generation pathway and anaplerotic pathway. The final engineered strain can efficiently produce 1,3-PDO from glucose with a titer of 110.4 g/L, a yield of 0.42 g/g glucose, and a productivity of 2.30 g/L/h in fed-batch fermentation. By further introducing an optimized xylose metabolism module, the engineered strain can simultaneously utilize glucose and xylose to produce 1,3-PDO with a titer of 98.2 g/L and a yield of 0.38 g/g sugars. This result demonstrates that C. glutamicum is a potential chassis for the industrial production of 1,3-PDO from abundant lignocellulosic feedstocks.     

Unravelling the thioesterases responsible for propionate formation in engineered Pseudomonas putida KT2440

Pseudomonas putida KT2440 is becoming a new robust metabolic chassis for biotechnological applications, due to its metabolic versatility, low nutritional requirements and biosafety status. We have previously engineered P. putida KT2440 to be an efficient propionate producer from L-threonine, although the internal enzymes converting propionyl-CoA to propionate are not clear. In this study, we thoroughly investigated 13 genes annotated as potential thioesterases in the KT2440 mutant. One thioesterase encoded by locus tag PP_4975 was verified to be the major contributor to propionate production in vivo. Deletion of PP_4975 significantly decreased propionate production, whereas the performance was fully restored by gene complement. Compared with thioesterase HiYciA from Haemophilus influenza, thioesterase PP_4975 showed a faster substrate conversion rate in vitro. Thus, this study expands our knowledge on acyl-CoA thioesterases in P. putida KT2440 and may also reveal a new target for further engineering the strain to improve propionate production performance.     

The Biosynthetic Origin of Irregular Monoterpenes in Lavandula: ISOLATION AND BIOCHEMICAL CHARACTERIZATION OF A NOVEL cis-PRENYL DIPHOSPHATE SYNTHASE GENE,LAVANDULYL DIPHOSPHATE SYNTHASE*

Lavender essential oils are constituted predominantly of regular monoterpenes, for example linalool, 1,8-cineole, and camphor. However, they also contain irregular monoterpenes including lavandulol and lavandulyl acetate. Although the majority of genes responsible for the production of regular monoterpenes in lavenders are now known, enzymes (including lavandulyl diphosphate synthase (LPPS)) catalyzing the biosynthesis of irregular monoterpenes in these plants have not been described. Here, we report the isolation and functional characterization of a novel cis-prenyl diphosphate synthase cDNA, termed Lavandula x intermedia lavandulyl diphosphate synthase (LiLPPS), through a homology-based cloning strategy. The LiLPPS ORF, encoding for a 305-amino acid long protein, was expressed in Escherichia coli, and the recombinant protein was purified by nickel-nitrilotriacetic acid affinity chromatography. The approximately 34.5-kDa bacterially produced protein specifically catalyzed the head-to-middle condensation of two dimethylallyl diphosphate units to LPP in vitro with apparent K_m and k_cat values of 208 ± 12 μm and 0.1 s⁻¹, respectively. LiLPPS is a homodimeric enzyme with a sigmoidal saturation curve and Hill coefficient of 2.7, suggesting a positive co-operative interaction among its catalytic sites. LiLPPS could be used to modulate the production of lavandulol and its derivatives in plants through metabolic engineering.     

<Emphasis Type="Italic">Lipomyces starkeyi</Emphasis>: an emerging cell factory for production of lipids,oleochemicals and biotechnology applications

Oils and oleochemicals produced by microbial cells offer an attractive alternative to petroleum and food-crop derived oils for the production of transport fuel and oleochemicals. An emerging candidate for industrial single cell oil production is the oleaginous yeast Lipomyces starkeyi. This yeast is capable of accumulating storage lipids to concentrations greater than 60% of the dry cell weight. From the perspective of industrial biotechnology L. starkeyi is an excellent chassis for single-cell oil and oleochemical production as it can use a wide variety of carbon and nitrogen sources as feedstock. The strain has been used to produce lipids from hexose and pentose sugars derived from cellulosic hydrolysates as well as crude glycerol and even sewage sludge. L. starkeyi also produces glucanhydrolases that have a variety of industrial applications and displays potential to be employed for bioremediation. Despite its excellent properties for biotechnology applications, adoption of L. starkeyi as an industrial chassis has been hindered by the difficulty of genetically manipulating the strain. This review will highlight the industrial potential of L. starkeyi as a chassis for the production of lipids, oleochemicals and other biochemicals. Additionally, we consider progress and challenges in engineering this organism for industrial applications.     

A “push-pull-restrain” strategy to improve citronellol production in Saccharomyces cerevisiae

Microbial production of monoterpenes has attracted increasing attention in recent years. Up to date, there are only few reports on the biosynthesis of the monoterpene alcohol citronellol that is widely used as fragrant and pharmaceutical intermediates. Here, we engineered Saccharomyces cerevisiae by employing a “push-pull-restrain” strategy to improve citronellol production based on the reduction of geraniol. Starting from a engineered geraniol-producing strain, different reductases were investigated and the best performing iridoid synthase from Catharanthus roseus (CrIS) resulted in 285.89 mg/L enantiomerically pure S-citronellol in shake flasks. Geranyl diphosphate (GPP), the most important precursor for monoterpenes, was enhanced by replacing the wild farnesyl diphosphate synthase (Erg20) with the mutant Erg20^F96W, increasing the citronellol titer to 406.01 mg/L without negative influence on cell growth. Moreover, we employed synthetic protein scaffolds and protein fusion to colocalize four sequential enzymes to achieve better substrate channeling along with the deletion of an intermediate degradation pathway gene ATF1, which elevated the citronellol titer to 972.02 mg/L with the proportion of 97.8% of total monoterpenes in YPD medium. Finally, the engineered strain with complemented auxotrophic markers produced 8.30 g/L of citronellol by fed-batch fermentation, which was the highest citronellol titer reported to date. The multi-level engineering strategies developed here demonstrate the potential of monoterpenes overproduction in yeast, which can serve as a generally applicable platform for overproduction of other monoterpenes.     

Micropropagation and in vitro production of secondary metabolites of Croton floribundus Spreng.

Croton floribundus Spreng., a native plant from South America, was utilized for in vitro micropropagation and phytochemical analyses. The effects of the addition of naphthaleneacetic acid and indole butyric acid, on the production of shoots and leaves, as well as volatile constituent production, were determined. The combination of naphthaleneacetic acid and indole butyric acid at a ratio of 1:1 led to the production of the maximum number of leaves and longest shoots after a 60-d subculture period. Analyses of leaf dichloromethane extracts using gas chromatography–mass spectrometry showed that monoterpenes and sesquiterpenes were the main chemical classes present in both in vivo and in vitro conditions. Use of these plant growth regulators in the medium-induced quantitative changes in the major monoterpenes (neral, geranial, limonene, and carvone). In vitro leaf extracts produced compounds such as carvone as well as a large amount of trans-β-farnesene, with the highest production of carvone (16.8%) being produced on medium supplemented with 1.0 mg?L^?1 naphthaleneacetic acid. These results suggested the occurrence of biotransformation reactions of limonene and farnesyl cations in culture.     

Biosynthesis of Taxadiene in Saccharomyces cerevisiae : Selection of Geranylgeranyl Diphosphate Synthase Directed by a Computer-Aided Docking Strategy

Identification of efficient key enzymes in biosynthesis pathway and optimization of the fitness between functional modules and chassis are important for improving the production of target compounds. In this study, the taxadiene biosynthesis pathway was firstly constructed in yeast by transforming ts gene and overexpressing erg20 and thmgr. Then, the catalytic capabilities of six different geranylgeranyl diphosphate synthases (GGPPS), the key enzyme in mevalonic acid (MVA) pathway catalyzing famesyl diphosphate (FPP) to geranylgeranyl diphosphate (GGPP), were predicted using enzyme-substrate docking strategy. GGPPSs from Taxus baccata x Taxus cuspidate (GGPPSbc), Erwinia herbicola (GGPPSeh), and S. cerevisiae (GGPPSsc) which ranked 1^st, 4^th and 6^th in docking with FPP were selected for construction. The experimental results were consistent with the computer prediction that the engineered yeast with GGPPSbc exhibited the highest production. In addition, two chassis YSG50 and W303-1A were chosen, and the titer of taxadiene reached 72.8 mg/L in chassis YSG50 with GGPPSbc. Metabolomic study revealed that the contents of tricarboxylic acid cycle (TCA) intermediates and their precursor amino acids in chassis YSG50 was lower than those in W303-1A, indicating less carbon flux was divided into TCA cycle. Furthermore, the levels of TCA intermediates in the taxadiene producing yeasts were lower than those in chassis YSG50. Thus, it may result in more carbon flux in MVA pathway in chassis YSG50, which suggested that YSG50 was more suitable for engineering the taxadiene producing yeast. These results indicated that computer-aided protein modeling directed isoenzyme selection strategy and metabolomic study could guide the rational design of terpenes biosynthetic cells.     

Engineering synthetic bacterial consortia for enhanced desulfurization and revalorization of oil sulfur compounds

The 4S pathway is the most studied bioprocess for the removal of the recalcitrant sulfur of aromatic heterocycles present in fuels. It consists of three sequential functional units, encoded by the dszABCD genes, through which the model compound dibenzothiophene (DBT) is transformed into the sulfur-free 2-hydroxybiphenyl (2HBP) molecule. In this work, a set of synthetic dsz cassettes were implanted in Pseudomonas putida KT2440, a model bacterial “chassis” for metabolic engineering studies. The complete dszB1A1C1-D1 cassette behaved as an attractive alternative — to the previously constructed recombinant dsz cassettes — for the conversion of DBT into 2HBP. Refactoring the 4S pathway by the use of synthetic dsz modules encoding individual 4S pathway reactions revealed unanticipated traits, e.g., the 4S intermediate 2HBP-sulfinate (HBPS) behaves as an inhibitor of the Dsz monooxygenases, and once secreted from the cells it cannot be further taken up. That issue should be addressed for the rational design of more efficient biocatalysts for DBT bioconversions. In this sense, the construction of synthetic bacterial consortia to compartmentalize the 4S pathway into different cell factories for individual optimization was shown to enhance the conversion of DBT into 2HBP, overcome the inhibition of the Dsz enzymes by the 4S intermediates, and enable efficient production of unattainable high added value intermediates, e.g., HBPS, that are difficult to obtain using the current monocultures.     

Engineering chimeric diterpene synthases and isoprenoid biosynthetic pathways enables high-level production of miltiradiene in yeast

Miltiradiene is a key intermediate in the biosynthesis of many important natural diterpene compounds with significant pharmacological activity, including triptolide, tanshinones, carnosic acid and carnosol. Sufficient accumulation of miltiradiene is vital for the production of these medicinal compounds. In this study, comprehensive engineering strategies were applied to construct a high-yielding miltiradiene producing yeast strain. First, a chassis strain that can accumulate 2.1 g L^-1 geranylgeraniol was constructed. Then, diterpene synthases from various species were evaluated for their ability to produce miltiradiene, and a chimeric miltiradiene synthase, consisting of class II diterpene synthase (di-TPS) CfTPS1 from Coleus forskohlii (Plectranthus barbatus) and class I di-TPS SmKSL1 from Salvia miltiorrhiza showed the highest efficiency in the conversion of GGPP to miltiradiene in yeast. Moreover, the miltiradiene yield was further improved by protein modification, which resulted in a final yield of 550.7 mg L^-1 in shake flasks and 3.5 g L^-1 in a 5-L bioreactor. This work offers an efficient and green process for the production of the important intermediate miltiradiene, and lays a foundation for further pathway reconstruction and the biotechnological production of valuable natural diterpenes.     

Metabolism of Monoterpenes in Cell Cultures of Common Sage (Salvia officinalis) : Biochemical Rationale for the Lack of Monoterpene Accumulation

Leaves of common sage (Salvia officinalis) accumulate monoterpenes in glandular trichomes at levels exceeding 15 milligrams per gram fresh weight at maturity, whereas sage cells in suspension culture did not accumulate detectable levels of monoterpenes (<0.3 nanograms per gram fresh weight) at any stage of the growth cycle, even in the presence of a polystyrene resin trap. Monoterpene biosynthesis from [U-¹⁴C]sucrose was also virtually undetectable in this cell culture system. In vitro assay of each of the enzymes required for the sequential conversion of the ubiquitous isoprenoid precursor geranyl pyrophosphate to (+)-camphor (a major monoterpene product of sage) in soluble extracts of the cells revealed the presence of activity sufficient to produce (+)-camphor at a readily detectable level (>0.3 micrograms per gram fresh weight) at the late log phase of growth. Other monoterpene synthetic enzymes were present as well. In vivo measurement of the ability to catabolize (+)-camphor in these cells indicated that degradative capability exceeded biosynthetic capacity by at least 1000-fold. Therefore, the lack of monoterpene accumulation in undifferentiated sage cultures could be attributed to a low level of biosynthetic activity (relative to the intact plant) coupled to a pronounced capacity for monoterpene catabolism.     

Engineering a genome‐reduced bacterium to eliminate Staphylococcus aureus biofilms in vivo

Bacteria present a promising delivery system for treating human diseases. Here, we engineered the genome‐reduced human lung pathogen Mycoplasma pneumoniae as a live biotherapeutic to treat biofilm‐associated bacterial infections. This strain has a unique genetic code, which hinders gene transfer to most other bacterial genera, and it lacks a cell wall, which allows it to express proteins that target peptidoglycans of pathogenic bacteria. We first determined that removal of the pathogenic factors fully attenuated the chassis strain in vivo. We then designed synthetic promoters and identified an endogenous peptide signal sequence that, when fused to heterologous proteins, promotes efficient secretion. Based on this, we equipped the chassis strain with a genetic platform designed to secrete antibiofilm and bactericidal enzymes, resulting in a strain capable of dissolving Staphylococcus aureus biofilms preformed on catheters in vitro, ex vivo, and in vivo. To our knowledge, this is the first engineered genome‐reduced bacterium that can fight against clinically relevant biofilm‐associated bacterial infections.     

Artificially designed routes for the conversion of starch to value-added mannosyl compounds through coupling in vitro and in vivo metabolic engineering strategies

Starch/cellulose has become the major feedstock for manufacturing biofuels and biochemicals because of their abundance and sustainability. In this study, we presented an artificially designed “starch-mannose-fermentation” biotransformation process through coupling the advantages of in vivo and in vitro metabolic engineering strategies together. Starch was initially converted into mannose via an in vitro metabolic engineering biosystem, and then mannose was fermented by engineered microorganisms for biomanufacturing valuable mannosyl compounds. The in vitro metabolic engineering biosystem based on phosphorylation/dephosphorylation reactions was thermodynamically favorable and the conversion rate reached 81%. The mannose production using whole-cell biocatalysts reached 75.4 g/L in a 30-L reactor, indicating the potential industrial application. Furthermore, the produced mannose in the reactor was directly served as feedstock for the fermentation process to bottom-up produced 19.2 g/L mannosyl-oligosaccharides (MOS) and 7.2 g/L mannosylglycerate (MG) using recombinant Corynebacterium glutamicum strains. Notably, such a mannose fermentation process facilitated the synthesis of MOS, which has not been achieved under glucose fermentation and improved MG production by 2.6-fold than that using the same C-mole of glucose. This approach also allowed access to produce other kinds of mannosyl derivatives from starch.     

Low Density Subcellular Fractions Enhance Disease-specific Prion Protein Misfolding

The production of prion particles in vitro by amplification with or without exogenous seed typically results in infectivity titers less than those associated with PrP^Sc isolated ex vivo and highlights the potential role of co-factors that can catalyze disease-specific prion protein misfolding in vivo. We used a cell-free conversion assay previously shown to replicate many aspects of transmissible spongiform encephalopathy disease to investigate the cellular location of disease-specific co-factors using fractions derived from gradient centrifugation of a scrapie-susceptible cell line. Fractions from the low density region of the gradient doubled the efficiency of conversion of recombinant PrP. These fractions contain plasma membrane and cytoplasmic proteins, and conversion enhancement can be achieved using PrP^Sc derived from two different strains of mouse-passaged scrapie as seed. Equivalent fractions from a second scrapie-susceptible cell line also stimulate conversion. We also show that subcellular fractions enhancing disease-specific prion protein conversion prevent in vitro fibrillization of recombinant prion protein, suggesting the existence of separate, competing mechanisms of disease-specific and nonspecific misfolding in vivo.     

Two new compounds from Cryptoporus volvatus

Two new compounds with the aldehyde group, cryptoporusal A (1) and 9-formyl-4-hydroxy-6, 9-dimethyl-1-O-β-D-xylosopyranosyl-8a,9-dihydro-ace-naphthylen-8-one (2), were isolated from the ethyl acetate extract of the fruiting bodies of Cryptoporus volvatus (Pk.) Hubbard. Their structures were elucidated by extensive spectroscopic studies, and comparison with literature data. Furthermore, they were evaluated for their in vivo cytotoxicity against five human cancer cell lines and antioxidant activity. Compound 1 exhibited strong cytotoxicity against HL-60 and both showed high ferric reducing capacity.     

Biochemistry of Oleoresinosis : Monoterpene and Diterpene Biosynthesis in Lodgepole Pine Saplings Infected with Ceratocystis clavigera or Treated with Carbohydrate Elicitors

Elevated levels of monoterpenes and diterpene resin acids are produced in the stems of lodgepole pine (Pinus contorta var latifolia) saplings when wounded and inoculated with the blue-stain fungus Ceratocystis clavigera or when wounded and treated with a pectic fragment from tomato leaves (PIIF) or a fungal cell wall fragment (chitosan). This induced defensive response (hyperoleoresinosis) is the result of a transient rise in the ability to biosynthesize cyclic monoterpenes and diterpene resin acids as measured by the in vivo incorporation of label from [U-¹⁴C]sucrose relative to untreated controls, and is accompanied by a corresponding rise in the levels or activities of the relevant terpene cyclases as determined by in vitro assay using labeled acyclic precursors. The results indicate that juvenile P. contorta responds to infection and biotic elicitors much like the mature tree, and they suggest that the Pinaceae possess a mechanism for elicitor recognition and induced defense similar to that of other higher plants.     

Biosynthesis of monoterpenes by Ceratocystis moniliformis

Ceratocystis moniliformis produced and excreted monoterpenes when grown on potato-dextrose broth. Geraniol, nerol, citronellol, linalol, α-terpineol, geranial and neral were identified by GC-MS. Their production commenced with the depletion of nitrogen in the growth medium and their combined concentration peaked at about 50 μg/ml on the 5th day of growth. The pathway for the biosynthesis of the identified monoterpenes was studied by supplying the radioactive precursors mevalonic acid-[2-¹⁴C], l-leucine-[4,5-³H(N)], and acetate- [2-¹⁴C] to C. moniliformis. For each precursor, the extent of incorporation into the above monoterpenes and the distribution of radioactivity in geraniol was determined. It was concluded that monoterpenes were formed via the mevalonate pathway, previously established for higher terpenes in other organisms. This represents the first information available on the biosynthetic pathway for free monoterpenes in a microbial system.     

Genome-scale metabolic modeling of P. thermoglucosidasius NCIMB 11955 reveals metabolic bottlenecks in anaerobic metabolism

Parageobacillus thermoglucosidasius represents a thermophilic, facultative anaerobic bacterial chassis, with several desirable traits for metabolic engineering and industrial production. To further optimize strain productivity, a systems level understanding of its metabolism is needed, which can be facilitated by a genome-scale metabolic model. Here, we present p-thermo, the most complete, curated and validated genome-scale model (to date) of Parageobacillus thermoglucosidasius NCIMB 11955. It spans a total of 890 metabolites, 1175 reactions and 917 metabolic genes, forming an extensive knowledge base for P. thermoglucosidasius NCIMB 11955 metabolism. The model accurately predicts aerobic utilization of 22 carbon sources, and the predictive quality of internal fluxes was validated with previously published ¹³C-fluxomics data. In an application case, p-thermo was used to facilitate more in-depth analysis of reported metabolic engineering efforts, giving additional insight into fermentative metabolism. Finally, p-thermo was used to resolve a previously uncharacterised bottleneck in anaerobic metabolism, by identifying the minimal required supplemented nutrients (thiamin, biotin and iron(III)) needed to sustain anaerobic growth. This highlights the usefulness of p-thermo for guiding the generation of experimental hypotheses and for facilitating data-driven metabolic engineering, expanding the use of P. thermoglucosidasius as a high yield production platform.     

A novel non-viral delivery method that enables efficient engineering of primary human T cells for ex vivo cell therapy applications

Background aimsNext-generation immune cell therapy products will require complex modifications using engineering technologies that can maintain high levels of cell functionality. Non-viral engineering methods have the potential to address limitations associated with viral vectors. However, while electroporation is the most widely used non-viral modality, concerns about its effects on cell functionality have led to the exploration of alternative approaches. Here the authors have examined the suitability of the Solupore non-viral delivery system for engineering primary human T cells for cell therapy applications.MethodsThe Solupore system was used to deliver messenger RNA (mRNA) and clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) guide RNA ribonucleoprotein (RNP) cargos to T cells, and efficiency was measured by flow cytometry. Cell perturbation was assessed by immune gene expression profiling, including an electroporation comparator. In vitro and in vivo cytotoxicity of chimeric antigen receptor (CAR) T cells generated using the Solupore system was evaluated using a real-time cellular impedance assay and a Raji-luciferase mouse tumor model, respectively.ResultsEfficient transfection was demonstrated through delivery of mRNA and CRISPR CAS9 RNP cargos individually, simultaneously and sequentially using the Solupore system while consistently maintaining high levels of cell viability. Gene expression profiling revealed minimal alteration in immune gene expression, demonstrating the low level of perturbation experienced by the cells during this transfection process. By contrast, electroporation resulted in substantial changes in immune gene expression in T cells. CAR T cells generated using the Solupore system exhibited efficient cytotoxicity against target cancer cells in vitro and in vivo.ConclusionsThe Solupore system is a non-viral means of simply, rapidly and efficiently delivering cargos to primary human immune cells with retention of high cell viability and functionality.     

Engineering and Two-Stage Evolution of a Lignocellulosic Hydrolysate-Tolerant Saccharomyces cerevisiae Strain for Anaerobic Fermentation of Xylose from AFEX Pretreated Corn Stover

The inability of the yeast Saccharomyces cerevisiae to ferment xylose effectively under anaerobic conditions is a major barrier to economical production of lignocellulosic biofuels. Although genetic approaches have enabled engineering of S. cerevisiae to convert xylose efficiently into ethanol in defined lab medium, few strains are able to ferment xylose from lignocellulosic hydrolysates in the absence of oxygen. This limited xylose conversion is believed to result from small molecules generated during biomass pretreatment and hydrolysis, which induce cellular stress and impair metabolism. Here, we describe the development of a xylose-fermenting S. cerevisiae strain with tolerance to a range of pretreated and hydrolyzed lignocellulose, including Ammonia Fiber Expansion (AFEX)-pretreated corn stover hydrolysate (ACSH). We genetically engineered a hydrolysate-resistant yeast strain with bacterial xylose isomerase and then applied two separate stages of aerobic and anaerobic directed evolution. The emergent S. cerevisiae strain rapidly converted xylose from lab medium and ACSH to ethanol under strict anaerobic conditions. Metabolomic, genetic and biochemical analyses suggested that a missense mutation in GRE3, which was acquired during the anaerobic evolution, contributed toward improved xylose conversion by reducing intracellular production of xylitol, an inhibitor of xylose isomerase. These results validate our combinatorial approach, which utilized phenotypic strain selection, rational engineering and directed evolution for the generation of a robust S. cerevisiae strain with the ability to ferment xylose anaerobically from ACSH.