Novel chitin/nanosilica composite scaffolds for bone tissue engineering applications

Biopolymers like chitin are widely investigated as scaffolds in bone tissue engineering. Its properties like biocompatibility, biodegradability, non-toxicity, wound healing ability, antibacterial activity, hemostatic property, etc., are widely known. However, these materials are not much bioactive. Addition of material like silica can improve the bioactivity and biocompatibility of chitin. In this work, chitin composite scaffolds containing nanosilica were prepared using chitin hydrogel and their bioactivity, swelling ability and cytotoxicity was analyzed in vitro. These scaffolds were found to be bioactive in simulated body fluid (SBF) and biocompatible when tested with MG 63 cell line. These results suggest that chitin/nanosilica composite scaffolds can be useful for bone tissue engineering applications.     

Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review

Hydrogels are physically or chemically cross-linked polymer networks that are able to absorb large amounts of water. They can be classified into different categories depending on various parameters including the preparation method, the charge, and the mechanical and structural characteristics. The present review aims to give an overview of hydrogels based on natural polymers and their various applications in the field of tissue engineering. In a first part, relevant parameters describing different hydrogel properties and the strategies applied to finetune these characteristics will be described. In a second part, an important class of biopolymers that possess thermosensitive properties (UCST or LCST behavior) will be discussed. Another part of the review will be devoted to the application of cryogels. Finally, the most relevant biopolymer-based hydrogel systems, the different methods of preparation, as well as an in depth overview of the applications in the field of tissue engineering will be given.     

Cell culture in autologous fibrin scaffolds for applications in tissue engineering

In tissue engineering techniques, three-dimensional scaffolds are needed to adjust and guide cell growth and to allow tissue regeneration. The scaffold must be biocompatible, biodegradable and must benefit the interactions between cells and biomaterial. Some natural biomaterials such as fibrin provide a structure similar to the native extracellular matrix containing the cells. Fibrin was first used as a sealant based on pools of commercial fibrinogen. However, the high risk of viral transmission of these pools led to the development of techniques of viral inactivation and elimination and the use of autologous fibrins. In recent decades, fibrin has been used as a release system and three-dimensional scaffold for cell culture. Fibrin scaffolds have been widely used for the culture of different types of cells, and have found several applications in tissue engineering. The structure and development of scaffolds is a key point for cell culture because scaffolds of autologous fibrin offer an important alternative due to their low fibrinogen concentrations, which are more suitable for cell growth.     

几丁聚糖在组织工程中的应用

支架材料作为组织工程的生物学植入替代物,对细胞移植与引导新组织生长有重要的作用。几丁聚糖可制成无毒性,无刺激性,生物相容性和生物可降解性良好的生物医用材料,在人工皮肤,骨修复材料,手术缝线等方面已广泛应用。本文分析了纯几丁聚糖支架结构和它与其他天然或合成材料复合的支架结构的物理、化学性质及其独特的生物学功能,同时还进一步介绍了其应用的范例并探讨了发展前景。     

Collagen scaffolds for tissue engineering

There are two major approaches to tissue engineering for regeneration of tissues and organs. One involves cell-free materials and/or factors and one involves delivering cells to contribute to the regeneraion process. Of the many scaffold materials being investigated, collagen type I, with selective removal of its telopeptides, has been shown to have many advantageous features for both of these approaches. Highly porous collagen lattice sponges have been used to support in vitro growth of many types of tissues. Use of bioreactors to control in vitro perfusion of medium and to apply hydrostatic fluid pressure has been shown to enhance histogenesis in collagen scaffolds. Collagen sponges have also been developed to contain differentiating-inducing materials like demineralized bone to stimulate differentiation of cartilage tissue both in vitro and in vivo.     

Freeze-gelled silk fibroin protein scaffolds for potential applications in soft tissue engineering

Recently tissue engineering has escalated much interest in biomedical and biotechnological applications. In this regard, exploration of new and suitable biomaterials is needed. Silk fibroin protein is used as one of the most preferable biomaterials for fabrication of scaffolds and several new techniques are being adopted to fabricate silk scaffolds with greater ease, efficiency and perfection. In this study, a freeze gelation technique is used for fabrication of silk fibroin protein 3D scaffolds, which is both time and energy efficient as compared to the conventional freeze drying technique. The fabricated silk fibroin freeze-gelled scaffolds are evaluated micro structurally for morphology with scanning electron microscopy which reveals relatively homogeneous pore structure and good interconnectivity. The pore sizes and porosity of these scaffolds ranges between 60-110 μm and 90-95%, respectively. Mechanical test shows that the compressive strength of the scaffolds is in the range of 20-40 kPa. The applicability to cell culture of the freeze gelled scaffolds has been examined with human keratinocytes HaCat cells which show the good cell viability and proliferation of cells after 5 days of culture suggesting the cytocompatibility. The freeze-gelled 3D scaffolds show comparable results with the conventionally prepared freeze dried 3D scaffolds. Thus, this technique may be used as an alternative method for 3D scaffolds preparation and may also be utilized for tissue engineering applications.     

Osteochondral tissue engineering: scaffolds, stem cells and applications

Osteochondral tissue engineering has shown an increasing development to provide suitable strategies for the regeneration of damaged cartilage and underlying subchondral bone tissue. For reasons of the limitation in the capacity of articular cartilage to self-repair, it is essential to develop approaches based on suitable scaffolds made of appropriate engineered biomaterials. The combination of biodegradable polymers and bioactive ceramics in a variety of composite structures is promising in this area, whereby the fabrication methods, associated cells and signalling factors determine the success of the strategies. The objective of this review is to present and discuss approaches being proposed in osteochondral tissue engineering, which are focused on the application of various materials forming bilayered composite scaffolds, including polymers and ceramics, discussing the variety of scaffold designs and fabrication methods being developed. Additionally, cell sources and biological protein incorporation methods are discussed, addressing their interaction with scaffolds and highlighting the potential for creating a new generation of bilayered composite scaffolds that can mimic the native interfacial tissue properties, and are able to adapt to the biological environment.     

Fabrication of chitin-chitosan/nano TiO2-composite scaffolds for tissue engineering applications

In this study, we prepared chitin-chitosan/nano TiO(2) composite scaffolds using lyophilization technique for bone tissue engineering. The prepared composite scaffold was characterized using SEM, XRD, FTIR and TGA. In addition, swelling, degradation and biomineralization capability of the composite scaffolds were evaluated. The developed composite scaffold showed controlled swelling and degradation when compared to the control scaffold. Cytocompatibility of the scaffold was assessed by MTT assay and cell attachment studies using osteoblast-like cells (MG-63), fibroblast cells (L929) and human mesenchymal stem cells (hMSCs). Results indicated no sign of toxicity and cells were found attached to the pore walls within the scaffolds. These results suggested that the developed composite scaffold possess the prerequisites for tissue engineering scaffolds and it can be used for tissue engineering applications.     

Composite scaffolds for cartilage tissue engineering

Tissue engineering remains a promising therapeutic strategy for the repair or regeneration of diseased or damaged tissues. Previous approaches have typically focused on combining cells and bioactive molecules (e.g., growth factors, cytokines and DNA fragments) with a biomaterial scaffold that functions as a template to control the geometry of the newly formed tissue, while facilitating the attachment, proliferation, and differentiation of embedded cells. Biomaterial scaffolds also play a crucial role in determining the functional properties of engineered tissues, including biomechanical characteristics such as inhomogeneity, anisotropy, nonlinearity or viscoelasticity. While single-phase, homogeneous materials have been used extensively to create numerous types of tissue constructs, there continue to be significant challenges in the development of scaffolds that can provide the functional properties of load-bearing tissues such as articular cartilage. In an attempt to create more complex scaffolds that promote the regeneration of functional engineered tissues, composite scaffolds comprising two or more distinct materials have been developed. This paper reviews various studies on the development and testing of composite scaffolds for the tissue engineering of articular cartilage, using techniques such as embedded fibers and textiles for reinforcement, embedded solid structures, multi-layered designs, or three-dimensionally woven composite materials. In many cases, the use of composite scaffolds can provide unique biomechanical and biological properties for the development of functional tissue engineering scaffolds.     

Chitosan-graft-β-cyclodextrin scaffolds with controlled drug release capability for tissue engineering applications

Biodegradable scaffolds composed of chitosan-g-β-cyclodextrin (chit-g-β-CD) were prepared by freeze-drying method as synthetic extracellular matrices to fill the gap during the healing process. Due to the presence of β-CD, these scaffolds can be used as a matrix for drug loading and controlled release. The morphology, swelling and drug release properties of the scaffolds were found to be dependent on the extent of cross-linking density in the scaffolds. The drug dissolution profile showed that chit-g-β-CD scaffolds provided a slower release of the entrapped ketoprofen than chitosan scaffold. The MTT assay showed that there is no obvious cytotoxicity of chit-g-β-CD scaffolds cross-linked with 0.01 M of glutaraldehyde against the fibroblasts (L929) cells. These results suggest that chit-g-β-CD scaffolds may become a potential biodegradable active filling material with controlled drug release capability, which provide a healthy environment and enhance the surrounding tissue regeneration.     

Laser fabrication of three-dimensional CAD scaffolds from photosensitive gelatin for applications in tissue engineering

In the present work, 3D CAD scaffolds for tissue engineering applications were developed starting from methacrylamide-modified gelatin (GelMOD) using two-photon polymerization (2PP). The scaffolds were cross-linked employing the biocompatible photoinitiator Irgacure 2959. Because gelatin is derived from collagen (i.e., the main constituent of the ECM), the developed materials mimic the cellular microenvironment from a chemical point of view. In addition, by applying the 2PP technique, structural properties of the cellular microenvironment can also be mimicked. Furthermore, in vitro degradation assays indicated that the enzymatic degradation capability of gelatin is preserved for the methacrylamide-modified derivative. An in depth morphological analysis of the 2PP-fabricated scaffolds demonstrated that the parameters of the CAD model are reproduced with great precision, including the ridge-like surface topography on the order of 1.5 μm. The developed scaffolds showed an excellent stability in culture medium. In a final part of the present work, the suitability of the developed scaffolds for tissue engineering applications was verified. The results indicated that the applied materials are suitable to support porcine mesenchymal stem cell adhesion and subsequent proliferation. Upon applying osteogenic stimulation, the seeded cells differentiated into the anticipated lineage. Energy dispersive X-ray (EDX) analysis showed the induced calcification of the scaffolds. The results clearly indicate that 2PP is capable of manufacturing precisely constructed 3D tissue engineering scaffolds using photosensitive polymers as starting material.     

Biocompatibility: Nanomaterials for cell- and tissue engineering

The reaction of cells to varying topographic surfaces has been investigated ever since the beginnings of cell culture technology, as these features influence the cells principle behaviours such as adhesion, spreading, morphology, motility and proliferation. Interest in this aspect of cell biology was renewed when advanced fabrication methods became more widespread. This paper tries to briefly summarise the current state of knowledge regarding the use of nanostructured surfaces for cell- and tissue engineering.     

Smart materials as scaffolds for tissue engineering

In this review, we focused our attention on the more important natural extracellular matrix (ECM) molecules (collagen and fibrin), employed as cellular scaffolds for tissue engineering and on a class of semi-synthetic materials made from the fusion of specific oligopeptide sequences, showing biological activities, with synthetic materials. In particular, these new "intelligent" scaffolds may contain oligopeptide cleaving sequences specific for matrix metalloproteinases (MMPs), integrin binding domains, growth factors, anti-thrombin sequences, plasmin degradation sites, and morphogenetic proteins. The aim was to confer to these new "intelligent" semi-synthetic biomaterials, the advantages offered by both the synthetic materials (processability, mechanical strength) and by the natural materials (specific cell recognition, cellular invasion, and the ability to supply differentiation/proliferation signals). Due to their characteristics, these semi-synthetic biomaterials represent a new and versatile class of biomimetic hybrid materials that hold clinical promise in serving as implants to promote wound healing and tissue regeneration.     

Heparin-functionalized chitosan scaffolds for bone tissue engineering

The aim of this study is to investigate the effects of heparin-functionalized chitosan scaffolds on the activity of preosteoblasts. The chitosan scaffolds having the pore size of ∼100 μm were prepared by a freeze-drying method. Two different methods for immobilization of heparin to chitosan scaffolds were successfully performed. In the first method, functionalization of the scaffolds was achieved by means of electrostatic interactions between negatively charged heparin and positively charged chitosan. The covalent immobilization of heparin to chitosan scaffolds by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (EDAC) and N-hydroxysuccinimide (NHS) was used as a second immobilization method. Morphology, proliferation, and differentiation of MC3T3-E1 preosteoblasts on heparin-functionalized chitosan scaffolds were investigated in vitro. The results indicate that covalently bound heparin containing chitosan scaffolds (CHC) stimulate osteoblast proliferation compared to other scaffolds, that is, unmodified chitosan scaffolds (CH), electrostatically bound heparin containing chitosan scaffolds (EHC), and CH+free heparin (CHF). SEM images also proved the stimulative effect of covalently bound heparin on the proliferation of preosteoblasts. Alkaline phosphatase (ALP) and osteocalcin (OCN) levels of cells proliferated on CHC and EHC were also higher than those for CH and CHF. In vitro studies have demonstrated that chitosan scaffolds increase viability and differentiation of MC3T3-E1 cells especially in the presence of immobilized heparin.     

Fabrication of chitin-chitosan/nano ZrO(2) composite scaffolds for tissue engineering applications

The urge to repair and regenerate natural tissues can now be satisfactorily fulfilled by various tissue engineering approaches. Chitin and chitosan are the most widely accepted biodegradable and biocompatible materials subsequent to cellulose. The incorporation of nano ZrO₂ onto the chitin-chitosan scaffold is thought to enhance osteogenesis. Hence a nanocomposite scaffold was fabricated by lyophilization technique using chitin-chitosan with nano ZrO₂. The prepared nanocomposite scaffolds were characterized using SEM, FTIR, XRD and TGA. In addition, the swelling, degradation, biomineralization, cell viability and cell attachment of the composite scaffolds were also evaluated. The results demonstrated better swelling and controlled degradation in comparison to the control scaffold. Cell viability studies proved the non toxic nature of the nanocomposite scaffolds. Cells were found to be attached to the pore walls and spread uniformly throughout the scaffolds. All these results suggested that the developed nanocomposite scaffolds possess the prerequisites for tissue engineering scaffolds and could be used for various tissue engineering applications.     

Permeability analysis of scaffolds for bone tissue engineering

Porous artificial bone substitutes, especially bone scaffolds coupled with osteobiologics, have been developed as an alternative to the traditional bone grafts. The bone scaffold should have a set of properties to provide mechanical support and simultaneously promote tissue regeneration. Among these properties, scaffold permeability is a determinant factor as it plays a major role in the ability for cells to penetrate the porous media and for nutrients to diffuse. Thus, the aim of this work is to characterize the permeability of the scaffold microstructure, using both computational and experimental methods. Computationally, permeability was estimated by homogenization methods applied to the problem of a fluid flow through a porous media. These homogenized permeability properties are compared with those obtained experimentally. For this purpose a simple experimental setup was used to test scaffolds built using Solid Free Form techniques. The obtained results show a linear correlation between the computational and the experimental permeability. Also, this study showed that permeability encompasses the influence of both porosity and pore size on mass transport, thus indicating its importance as a design parameter. This work indicates that the mathematical approach used to determine permeability may be useful as a scaffold design tool.     

Functionalized synthetic biodegradable polymer scaffolds for tissue engineering

Scaffolds (artificial ECMs) play a pivotal role in the process of regenerating tissues in 3D. Biodegradable synthetic polymers are the most widely used scaffolding materials. However, synthetic polymers usually lack the biological cues found in the natural extracellular matrix. Significant efforts have been made to synthesize biodegradable polymers with functional groups that are used to couple bioactive agents. Presenting bioactive agents on scaffolding surfaces is the most efficient way to elicit desired cell/material interactions. This paper reviews recent advancements in the development of functionalized biodegradable polymer scaffolds for tissue engineering, emphasizing the syntheses of functional biodegradable polymers, and surface modification of polymeric scaffolds.