Effect of juxtamembrane tryptophans on the immersion depth of Synaptobrevin, an integral vesicle membrane protein

Proper positioning of membrane proteins in the host membrane is often critical to successful protein function. While hydrophobic considerations play a dominant role in determining the topology of a protein in the membrane, amphiphilic residues, such as tryptophan, may 'anchor' the protein near the water-membrane interface. The SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) family of membrane proteins mediates intracellular membrane fusion. Correct positioning of the SNAREs is necessary if fusion is to occur. Synaptobrevins are integral vesicle membrane proteins that are well conserved across species. Interestingly, mammalian Synaptobrevins typically contain two adjacent tryptophans near the water-membrane interface whereas the Drosophila, neuronal-Synaptobrevin (n-Syb), contains a single tryptophan in this same region. To explore the role of these tryptophan residues in membrane positioning, we prepared a peptide containing residues 75-121 of D. melanogaster n-Syb in DPC micelles, biosynthetically labeled with 4-fluorophenylalanine and 5-fluorotryptophan for the examination by (19)F NMR spectroscopy. Mutations of this construct containing zero and two tryptophan residues near the water-membrane interface resulted in changes in the positioning of n-Syb in the micelle. Moreover, the addition of a second tryptophan appears to slow dynamic motions of n-Syb near the micelle-water interface. These data therefore indicate that juxtamembrane tryptophan residues are important determinants of the position of Synaptobrevin in the membrane.     

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.     

A study of the membrane-water interface region of membrane proteins

The most conspicuous structural characteristic of the alpha-helical membrane proteins is their long transmembrane alpha-helices. However, other structural elements, as yet largely ignored in statistical studies of membrane protein structure, are found in those parts of the protein that are located in the membrane-water interface region. Here, we show that this region is enriched in irregular structure and in interfacial helices running roughly parallel with the membrane surface, while beta-strands are extremely rare. The average amino acid composition is different between the interfacial helices, the parts of the transmembrane helices located in the interface region, and the irregular structures. In this region, hydrophobic and aromatic residues tend to point toward the membrane and charged/polar residues tend to point away from the membrane. The interface region thus imposes different constraints on protein structure than do the central hydrocarbon core of the membrane and the surrounding aqueous phase.     

Role of helix-helix interactions in assembly of the bacteriorhodopsin lattice.

The purple membrane of Halobacterium salinarium is a two-dimensional lattice of lipids and the integral membrane protein bacteriorhodopsin (BR). To determine whether helix-helix interactions within the membrane core stabilize this complex, we substituted amino acid residues at the helix-helix interface between BR monomers and examined the assembly of the protein into the lattice. Lattice assembly was demonstrated to fit a cooperative self-assembly model that exhibits a critical concentration in vivo. Using this model as the basis for a quantitative assay of lattice stability, bulky substitutions at the helix-helix interface between BR monomers within the membrane core were shown to be destabilizing, probably due to steric clash. Ala substitutions of two residues at the helix-helix interface also reduced stability, suggesting that the side chains of these residues participate in favorable van der Waals packing interactions. However, the stabilizing interactions were restricted to a small region of the interface, and most of the substitutions had little effect. Thus, the contribution of helix-helix interactions to lattice stability appears limited, and favorable interactions between other regions of neighboring BR monomers or between BR and lipid molecules must also contribute.     

Membrane-bound structure and energetics of alpha-synuclein

Aggregation and fibrillation of alpha-synuclein bound to membranes are believed to be involved in Parkinson's and other neurodegenerative diseases. On SDS micelles, the N-terminus of alpha-synuclein forms two curved helices linked by a short loop. However, its structure on lipid bilayers has not been experimentally resolved. Using MD simulations with an implicit membrane model we show here that, on a planar mixed membrane, the truncated alpha-synuclein (residues 1-95) forms a bent helix. Bending of the helix is not due to the protein sequence or membrane binding, but to collective motions of the long helix. The backbone of the helix is approximately 2.5 A above the membrane surface, with some residues partially inserted in the membrane core. The helix periodicity is 11/3 (11 residues complete three full turns) as opposed to 18/5 periodicity of an ideal alpha-helix, with hydrophobic residues towards the membrane, negatively charged residues towards the solvent and lysines on the polar/nonpolar interface. A series of threonines, which are characteristic for alpha-synuclein and perhaps a phosphorylation site, is also located at the hydrophobic/hydrophilic interface with their side chain often hydrogen bonded to the main-chain atom. The calculations show that the energy penalty for change in periodicity from the 18/5 to 11/3 on the anionic membrane is overcome by favorable solvation energy. The binding of truncated alpha-synuclein to membranes is weak. It prefers anionic membranes but it also binds marginally to a neutral membrane, via its C-terminus. Dimerization of helical monomers on the mixed membrane is energetically favorable. However, it slightly interferes with membrane binding. This might promote lateral diffusion of the protein on the membrane surface and facilitate assembly of oligomers that precede fibrillation.     

Membrane association and selectivity of the antimicrobial peptide NK‐2: a molecular dynamics simulation study

In an effort to better understand the initial mechanism of selectivity and membrane association of the synthetic antimicrobial peptide NK‐2, we have applied molecular dynamics simulation techniques to elucidate the interaction of the peptide with the membrane interfaces. A homogeneous dipalmitoylphosphatidylglycerol (DPPG) and a homogeneous dipalmitoylphosphatidylethanolamine (DPPE) bilayers were taken as model systems for the cytoplasmic bacterial and human erythrocyte membranes, respectively. The results of our simulations on DPPG and DPPE model membranes in the gel phase show that the binding of the peptide, which is considerably stronger for the negatively charged DPPG lipid bilayer than for the zwitterionic DPPE, is mostly governed by electrostatic interactions between negatively charged residues in the membrane and positively charged residues in the peptide. In addition, a characteristic distribution of positively charged residues along the helix facilitates a peptide orientation parallel to the membrane interface. Once the peptides reside close to the membrane surface of DPPG with the more hydrophobic side chains embedded into the membrane interface, the peptide initially disturbs the respective bilayer integrity by a decrease of the order parameter of lipid acyl chain close to the head group region, and by a slightly decrease in bilayer thickness. We found that the peptide retains a high content of helical structure on the zwitterionic membrane‐water interface, while the loss of α‐helicity is observed within a peptide adsorbed onto negatively charged lipid membranes. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Mutational analysis of the role of tryptophan residues in an antimicrobial peptide

Antimicrobial peptides belonging to the pediocin-like family of bacteriocins (class IIa bacteriocins) produced by lactic acid bacteria contain several tryptophan residues that are highly conserved. Since tryptophan residues in membrane proteins are often positioned in the membrane-water interface, we hypothesized that Trp residues in bacteriocins could be important determinants of the structure of membrane-bound peptides and of anti-microbial activity. To test this hypothesis, the effects of mutating each of the 3 tryptophan residues (Trp18, Trp33, and Trp41) in the 43-residue pediocin-like bacteriocin sakacin P were studied. Trp18 and Trp33 are located at each end of an amphihilic alpha-helix, whereas Trp41 is near the end of an unstructured C-terminal tail. Replacement of Trp33 with the hydrophobic residues Leu and Phe had marginal effects on activity, whereas replacement with the more polar Tyr and Arg reduced activity 10-20 and 500-1000 times, respectively, indicating that Trp33 and the C-terminal part of the helix interact with the hydrophobic core of the membrane. Any mutation of Trp18 and Trp41 reduced activity, indicating that these two residues play unique roles. Substitutions with other aromatic residues were the least deleterious, indicating that both Trp18 and Trp41 interact with the membrane-water interface. The suggested locations of the three Trp residues are compatible with a structural model in which the helix and the C-terminal tail form a hairpin-like structure, bringing Trp18 and Trp41 close to each other in the interface, and placing Trp33 in the hydrophobic core of the membrane. Indeed, the deleterious effect of the W18L and W41L mutations could be overcome by stabilizing the hairpin-like structure by introduction of a disulfide bridge between residues 24 and 44. These results provide a basis for a refined structural model of pediocin-like bacteriocins and highlight the unique role that tryptophan residues can play in membrane-interacting peptides.     

Mechanism of inhibition of enveloped virus membrane fusion by the antiviral drug arbidol

The broad-spectrum antiviral arbidol (Arb) inhibits cell entry of enveloped viruses by blocking viral fusion with host cell membrane. To better understand Arb mechanism of action, we investigated its interactions with phospholipids and membrane peptides. We demonstrate that Arb associates with phospholipids in the micromolar range. NMR reveals that Arb interacts with the polar head-group of phospholipid at the membrane interface. Fluorescence studies of interactions between Arb and either tryptophan derivatives or membrane peptides reconstituted into liposomes show that Arb interacts with tryptophan in the micromolar range. Interestingly, apparent binding affinities between lipids and tryptophan residues are comparable with those of Arb IC50 of the hepatitis C virus (HCV) membrane fusion. Since tryptophan residues of membrane proteins are known to bind preferentially at the membrane interface, these data suggest that Arb could increase the strength of virus glycoprotein's interactions with the membrane, due to a dual binding mode involving aromatic residues and phospholipids. The resulting complexation would inhibit the expected viral glycoprotein conformational changes required during the fusion process. Our findings pave the way towards the design of new drugs exhibiting Arb-like interfacial membrane binding properties to inhibit early steps of virus entry, i.e., attractive targets to combat viral infection.     

Coils in the membrane core are conserved and functionally important

With the increasing number of available α-helical transmembrane (TM) protein structures, the traditional picture of membrane proteins has been challenged. For example, reentrant regions, which enter and exit the membrane at the same side, and interface helices, which lie parallel with the membrane in the membrane-water interface, are common. Furthermore, TM helices are frequently kinked, and their length and tilt angle vary. Here, we systematically analyze 7% of all residues within the deep membrane core that are in coil state. These coils can be found in TM-helix kinks as major breaks in TM helices and as parts of reentrant regions.Coil residues are significantly more conserved than other residues. Due to the polar character of the coil backbone, they are either buried or located near aqueous channels. Coil residues are frequently found within channels and transporters, where they introduce the flexibility and polarity required for transport across the membrane. Therefore, we believe that coil residues in the membrane core, while constituting a structural anomaly, are essential for the function of proteins.     

NMR structure and molecular dynamics of the in-plane membrane anchor of nonstructural protein 5A from bovine viral diarrhea virus

Hepatitis C virus (HCV) nonstructural protein 5A (NS5A) is a monotopic membrane protein anchored to the membrane by an N-terminal in-plane amphipathic alpha-helix. This membrane anchor is essential for the assembly of a functional viral replication complex. Although amino acid sequences differ considerably, putative membrane anchors with amphipathic features were predicted in NS5A from related Flaviviridae family members, in particular bovine viral diarrhea virus (BVDV), the prototype representative of the genus Pestivirus. We report here the NMR structure of the membrane anchor 1-28 of NS5A from BVDV in the presence of different membrane mimetic media. This anchor includes a long amphipathic alpha-helix of 21 residues interacting in-plane with the membrane interface and including a putative flexible region. Molecular dynamic simulation at a water-dodecane interface used to mimic the surface separating a lipid bilayer and an aqueous medium demonstrated the stability of the helix orientation and the location at the hydrophobic-hydrophilic interface. The flexible region of the helix appears to be required to allow the most favorable interaction of hydrophobic and hydrophilic side chain residues with their respective environment at the membrane interface. Despite the lack of amino acid sequence similarity, this amphipathic helix shares common structural features with that of the HCV counterpart, including a stable, hydrophobic N-terminal segment separated from the more hydrophilic C-terminal segment by a local, flexible region. These structural conservations point toward conserved roles of the N-terminal in-plane membrane anchors of NS5A in replication complex formation of HCV, BVDV, and other related viruses.     

Identification of protein side chains near the membrane-aqueous interface: a site-directed spin labeling study of KcsA.

This study presents an approach to identifying surface residues on membrane proteins that are exposed toward the membrane-aqueous interface. The method employs a lipid Ni(II) chelate that localizes the metal ion to a region near the membrane-aqueous interface. Lateral diffusion of the lipid chelate results in Heisenberg exchange (HE) with nitroxide side chains in the protein only if direct contact occurs between the paramagnetic species during a collision. Thus, HE serves as a signature for residues facing the bilayer in the neighborhood of the membrane-aqueous interface. To evaluate the method, 13 surface residues on the extracellular half of KcsA, a prokaryotic potassium channel of known structure, were examined for HE with the Ni(II) chelate. The HE rate between the two species is found to depend strongly on the vertical position of the nitroxide with respect to the membrane-aqueous interface. Nitroxides introduced near the interface experience relatively high HE rates, whereas nitroxides that are immersed in the bilayer interior or sterically sheltered from collision experience low or undetectable rates. The results indicate that residues near the interface can be identified on the basis of their high rates of collision with the headgroup region of the bilayer.     

Free-energy profiles of membrane insertion of the M2 transmembrane peptide from influenza A virus

The insertion of the M2 transmembrane peptide from influenza A virus into a membrane has been studied with molecular-dynamics simulations. This system is modeled by an atomically detailed peptide interacting with a continuum representation of a membrane bilayer in aqueous solution. We performed replica-exchange molecular-dynamics simulations with umbrella-sampling techniques to characterize the probability distribution and conformation preference of the peptide in the solution, at the membrane interface, and in the membrane. The minimum in the calculated free-energy surface of peptide insertion corresponds to a fully inserted, helical peptide spanning the membrane. The free-energy profile also shows that there is a significant barrier for the peptide to enter into this minimum in a nonhelical conformation. The sequence of the peptide is such that hydrophilic amino acid residues at the ends of the otherwise primarily hydrophobic peptide create a trapped, U-shaped conformation with the hydrophilic residues associated with the aqueous phase and the hydrophobic residues embedded in the membrane. Analysis of the free energy shows that the barrier to insertion is largely enthalpic in nature, whereas the membrane-spanning global minimum is favored by entropy.     

Interactions controlling the membrane binding of basic protein domains: phenylalanine and the attachment of the myristoylated alanine-rich C-kinase substrate protein to interfaces.

Basic residues are known to play a critical role in the attachment of protein domains to membrane interfaces. Many of these domains also contain hydrophobic residues that may alter the binding and the position of the domain on the interface. In the present study, the role of phenylanine in determining the membrane position, dynamics and free energy of a peptide derived from the effector domain of the myristoylated alanine-rich C-kinase substrate (MARCKS) protein was examined. Deuterium NMR in membranes containing phosphatidylcholine (PC) and phosphatidylserine (PS) indicates that this peptide, MARCKS(151-175), partially penetrates the membrane interface when bound and alters the effective charge density on the membrane interface by approximately 2 charges per bound peptide. However, a derivative of this peptide in which the five phenylalanines are replaced by alanine, MARCKS-Ala, does not penetrate the interface when membrane-bound. This result was confirmed by depth measurements by electron paramagnetic resonance spectroscopy on several spin-labeled derivatives of the Phe-less derivative. In contrast to nitroxides on MARCKS(151-175), nitroxides on the derivative lacking Phe do not reside within the bilayer but are in the aqueous phase when the peptide is bound to the membrane. The Phe to Ala substitutions shift the position of the labeled side chains by approximately 10-15 A. The side-chain dynamics of MARCKS-Ala are strongly influenced by membrane charge density and indicate that this peptide is drawn closer to the membrane interface at higher charge densities. As expected, MARCKS-Ala binds more weakly to membranes composed of PS/PC (1:9) than does the native MARCKS peptide; however, each phenylalanine contributes only 0.2 kcal/mol to the binding energy difference, far less than the 1.3 kcal/mol expected for the binding of phenylalanine to the membrane interface. This energetic discrepancy and the differences in membrane position of these peptides can be accounted for by a dehydration energy that is encountered as the peptide approaches the membrane interface. This energy likely includes a Born repulsion acting between the charged peptide and the low dielectric membrane interior. The interplay between the long-range attractive Coulombic force, the short-range repulsive force and the hydrophobic effect controls the position and energetics of protein domains on acidic membrane interfaces.     

Determination of the structure of the MinD-ATP complex reveals the orientation of MinD on the membrane and the relative location of the binding sites for MinE and MinC

The three Min proteins spatially regulate Z ring positioning in Escherichia coli and are dynamically associated with the membrane. MinD binds to vesicles in the presence of ATP and can recruit MinC or MinE. Biochemical and genetic evidence indicate the binding sites for these two proteins on MinD overlap. Here we solved the structure of a hydrolytic-deficient mutant of MinD truncated for the C-terminal amphipathic helix involved in binding to the membrane. The structure solved in the presence of ATP is a dimer and reveals the face of MinD abutting the membrane. Using a combination of random and extensive site-directed mutagenesis additional residues important for MinE and MinC binding were identified. The location of these residues on the MinD structure confirms that the binding sites overlap and reveals that the binding sites are at the dimer interface and exposed to the cytosol. The location of the binding sites at the dimer interface offers a simple explanation for the ATP dependence of MinC and MinE binding to MinD.     

Mutational Analysis of the Class IIa Bacteriocin Curvacin A and Its Orientation in Target Cell Membranes

To analyze the orientation in target cell membranes of the pediocin-like bacteriocin (antimicrobial peptide) curvacin A, 55 variants were generated by site-directed mutagenesis and their potencies against four different target cells determined. The result suggest that the somewhat hydrophilic short central helix (residues 19 to 24), along with the N-terminal β-sheet-like structure (residues 1 to 16), inserts in the interface region of the target cell membrane, with Ala22 close to the hydrophobic core of the membrane. The following hinge region, with Gly28 as an important residue, may then form a turn wherein Gly28 becomes positioned near the border between the interface and the hydrophobic regions, thus permitting the longer and more-hydrophobic C-terminal helix (residues 29 to 41) to insert into the hydrophobic core of the membrane. This helix contains three glycine residues (G33, G37, and G40) that form a putative helix-helix-interacting GxxxGxxG motif. The replacement of any of these glycines with a larger residue was very detrimental, suggesting their possible involvement in helix-helix interactions with a membrane-embedded receptor protein.     

Interaction of dystrophin rod domain with membrane phospholipids. Evidence of a close proximity between tryptophan residues and lipids

Dystrophin is assumed to act via the central rod domain as a flexible linker between the amino-terminal actin binding domain and carboxyl-terminal proteins associated with the membrane. The rod domain is made up of 24 spectrin-like repeats and has been shown to modify the physical properties of lipid membranes. The nature of this association still remains unclear. Tryptophan residues tend to cluster at or near to the water-lipid interface of the membrane. To assess dystrophin rod domain-membrane interactions, tryptophan residues properties of two recombinant proteins of the rod domain were examined by (1)H NMR and fluorescence techniques in the presence of membrane lipids. F114 (residues 439-553) is a partly folded protein as inferred from (1)H NMR, tryptophan fluorescence emission intensity, and the excited state lifetime. By contrast, F125 (residues 439-564) is a folded compact protein. Tryptophan fluorescence quenching shows that both proteins are characterized by structural fluctuations with their tryptophan residues only slightly buried from the surface. In the presence of negatively charged small vesicles, the fluorescence characteristics of F125 change dramatically, indicating that tryptophan residues are in a more hydrophobic environment. Interestingly, these modifications are not observed with F114. Fluorescence quenching experiments confirm that tryptophan residues are shielded from the solvent in the complex F125 lipids by a close contact with lipids. The use of membrane-bound quenchers allowed us to conclude that dystrophin rod domain lies along the membrane surface and may be involved in a structural array comprising membrane and cytoskeletal proteins as well as membrane lipids.     

The importance of the membrane interface as the reference state for membrane protein stability

The insertion of nascent polypeptide chains into lipid bilayer membranes and the stability of membrane proteins crucially depend on the equilibrium partitioning of polypeptides. For this, the transfer of full sequences of amino-acid residues into the bilayer, rather than individual amino acids, must be understood. Earlier studies have revealed that the most likely reference state for partitioning very hydrophobic sequences is the membrane interface. We have used μs-scale simulations to calculate the interface-to-transmembrane partitioning free energies ΔG_S→TM for two hydrophobic carrier sequences in order to estimate the insertion free energy for all 20 amino acid residues when bonded to the center of a partitioning hydrophobic peptide. Our results show that prior single-residue scales likely overestimate the partitioning free energies of polypeptides. The correlation of ΔG_S→TM with experimental full-peptide translocon insertion data is high, suggesting an important role for the membrane interface in translocon-based insertion. The choice of carrier sequence greatly modulates the contribution of each single-residue mutation to the overall partitioning free energy. Our results demonstrate the importance of quantifying the observed full-peptide partitioning equilibrium, which is between membrane interface and transmembrane inserted, rather than combining individual water-to-membrane amino acid transfer free energies.     

Role of aromatic localization in the gating process of a potassium channel

Position of the transmembrane aromatic residues of the KirBac1.1 potassium channel shifts from an even distribution in the closed state toward the membrane/solute interface in the open state model. This is the first example of an integral membrane protein making use of the observed preference for transmembrane aromatic residues to reside at the interfaces. The process of aromatic localization is proposed as a means of directing and stabilizing structural changes during conformational transitions within the transmembrane region of integral membrane proteins. All-atom molecular dynamics simulations of the open and closed conformers in a membrane environment have been carried out to take account of the interactions between the aromatic residues and the lipids, which may be involved in the conformational change, e.g., the gating of the channel.     

Role of Aromatic Localization in the Gating Process of a Potassium Channel

Position of the transmembrane aromatic residues of the KirBac1.1 potassium channel shifts from an even distribution in the closed state toward the membrane/solute interface in the open state model. This is the first example of an integral membrane protein making use of the observed preference for transmembrane aromatic residues to reside at the interfaces. The process of aromatic localization is proposed as a means of directing and stabilizing structural changes during conformational transitions within the transmembrane region of integral membrane proteins. All-atom molecular dynamics simulations of the open and closed conformers in a membrane environment have been carried out to take account of the interactions between the aromatic residues and the lipids, which may be involved in the conformational change, e.g., the gating of the channel.     

Cholesterol sensitivity of KIR2.1 is controlled by a belt of residues around the cytosolic pore

Kir channels play an important role in setting the resting membrane potential and modulating membrane excitability. A common feature of several Kir channels is that they are regulated by cholesterol. Yet, the mechanism by which cholesterol affects channel function is unclear. We recently showed that the cholesterol sensitivity of Kir2 channels depends on several CD-loop residues. Here we show that this cytosolic loop is part of a regulatory site that also includes residues in the G-loop, the N-terminus, and the connecting segment between the C-terminus and the inner transmembrane helix. Together, these residues form a cytosolic belt that surrounds the pore of the channel close to its interface with the transmembrane domain, and modulate the cholesterol sensitivity of the channel. Furthermore, we show that residues in this cluster are correlated with residues located in the most flexible region of the G-loop, the major cytosolic gate of Kir2.1, implying that the importance of these residues extends beyond their effect on the channel's cholesterol sensitivity. We suggest that the residues of the cholesterol sensitivity belt are critical for channel gating.