Crystal structures and increased stabilization of the protein G variants with switched folding pathways NuG1 and NuG2

We recently described two protein G variants (NuG1 and NuG2) with redesigned first hairpins that were almost twice as stable, folded 100-fold faster, and had a switched folding mechanism relative to the wild-type protein. To test the structural accuracy of our design algorithm and to provide insights to the dramatic changes in the kinetics and thermodynamics of folding, we have now determined the crystal structures of NuG1 and NuG2 to 1.8 A and 1.85 A, respectively. We find that they adopt hairpin structures that are closer to the computational models than to wild-type protein G; the RMSD of the NuG1 hairpin to the design model and the wild-type structure are 1.7 A and 5.1 A, respectively. The crystallographic B factor in the redesigned first hairpin of NuG1 is systematically higher than the second hairpin, suggesting that the redesigned region is somewhat less rigid. A second round of structure-based design yielded new variants of NuG1 and NuG2, which are further stabilized by 0.5 kcal/mole and 0.9 kcal/mole.     

Computer-based redesign of a protein folding pathway.

A fundamental test of our current understanding of protein folding is to rationally redesign protein folding pathways. We use a computer-based design strategy to switch the folding pathway of protein G, which normally involves formation of the second, but not the first, beta-turn at the rate limiting step in folding. Backbone conformations and amino acid sequences that maximize the interaction density in the first beta-hairpin were identified, and two variants containing 11 amino acid replacements were found to be approximately 4 kcal mol-1 more stable than wild type protein G. Kinetic studies show that the redesigned proteins fold approximately 100 x faster than wild type protein and that the first beta-turn is formed and the second disrupted at the rate limiting step in folding.     

Physical-chemical determinants of turn conformations in globular proteins

Globular proteins are assemblies of alpha-helices and beta-strands, interconnected by reverse turns and longer loops. Most short turns can be classified readily into a limited repertoire of discrete backbone conformations, but the physical-chemical determinants of these distinct conformational basins remain an open question. We investigated this question by exhaustive analysis of all backbone conformations accessible to short chain segments bracketed by either an alpha-helix or a beta-strand (i.e., alpha-segment-alpha, beta-segment-beta, alpha-segment-beta, and beta-segment-alpha) in a nine-state model. We find that each of these four secondary structure environments imposes its own unique steric and hydrogen-bonding constraints on the intervening segment, resulting in a limited repertoire of conformations. In greater detail, an exhaustive set of conformations was generated for short backbone segments having reverse-turn chain topology and bracketed between elements of secondary structure. This set was filtered, and only clash-free, hydrogen-bond-satisfied conformers having reverse-turn topology were retained. The filtered set includes authentic turn conformations, observed in proteins of known structure, but little else. In particular, over 99% of the alternative conformations failed to satisfy at least one criterion and were excluded from the filtered set. Furthermore, almost all of the remaining alternative conformations have close tolerances that would be too tight to accommodate side chains longer than a single beta-carbon. These results provide a molecular explanation for the observation that reverse turns between elements of regular secondary can be classified into a small number of discrete conformations.     

Sequence swapping does not result in conformation swapping for the beta4/beta5 and beta8/beta9 beta-hairpin turns in human acidic fibroblast growth factor

The beta-turn is the most common type of nonrepetitive structure in globular proteins, comprising ~25% of all residues; however, a detailed understanding of effects of specific residues upon beta-turn stability and conformation is lacking. Human acidic fibroblast growth factor (FGF-1) is a member of the beta-trefoil superfold and contains a total of five beta-hairpin structures (antiparallel beta-sheets connected by a reverse turn). beta-Turns related by the characteristic threefold structural symmetry of this superfold exhibit different primary structures, and in some cases, different secondary structures. As such, they represent a useful system with which to study the role that turn sequences play in determining structure, stability, and folding of the protein. Two turns related by the threefold structural symmetry, the beta4/beta5 and beta8/beta9 turns, were subjected to both sequence-swapping and poly-glycine substitution mutations, and the effects upon stability, folding, and structure were investigated. In the wild-type protein these turns are of identical length, but exhibit different conformations. These conformations were observed to be retained during sequence-swapping and glycine substitution mutagenesis. The results indicate that the beta-turn structure at these positions is not determined by the turn sequence. Structural analysis suggests that residues flanking the turn are a primary structural determinant of the conformation within the turn.     

Reduced tendency to form a beta turn in peptides from the P22 tailspike protein correlates with a temperature-sensitive folding defect

A family of mutants of the P22 bacteriophage tailspike protein has been characterized as temperature sensitive for folding (tsf) by King and co-workers [King, J. (1986) Bio/Technology 4, 297-303]. There is substantial evidence that the tsf mutations alter the folding pathway but not the stability of the final folded protein. Several point mutations are known to cause the tsf phenotype; most of these occur in regions of the tailspike sequence likely to take up reverse turns. Hence, it has been hypothesized that the correct folding of the P22 tailspike protein requires formation of turns and that the mutations causing tsf phenotypes interfere at this critical stage. We have tested this hypothesis by study of isolated peptides corresponding to a region of the P22 tailspike harboring a tsf mutation. Comparison of the tendencies of wild-type and tsf sequences to adopt turn conformations was achieved by the synthesis of peptides with flanking cysteine residues and the use of a thiol-disulfide exchange assay. We find that the wild-type sequence, either as a decapeptide (Ac-CVKFPGIETC-CONH2) or as a dodecapeptide (Ac-CYVKFPGIETLC-CONH2), has a 3-5-fold greater tendency for its termini to approach closely enough to form the intramolecular disulfide than do the peptide sequences corresponding to the tsf mutant sequences, which have a Gly----Arg substitution (Ac-CVKFPRIETC-CONH2 or Ac-CYVKFPRIETLC-CONH2). A peptide with a D-Arg substituted for the Gly has a slightly higher turn propensity than does the wild type. Together with data from nuclear magnetic resonance analysis of the oxidized peptides, this suggests that a type II beta turn is favored by the wild-type sequence. Our results on isolated peptides from the P22 tailspike protein support the model for its folding that includes reverse turn formation as a critical step.     

Role of amino acid residues at turns in the conformational stability and folding of human lysozyme

To clarify the role of amino acid residues at turns in the conformational stability and folding of a globular protein, six mutant human lysozymes deleted or substituted at turn structures were investigated by calorimetry, GuHCl denaturation experiments, and X-ray crystal analysis. The thermodynamic properties of the mutant and wild-type human lysozymes were compared and discussed on the basis of their three-dimensional structures. For the deletion mutants, Delta47-48 and Delta101, the deleted residues are in turns on the surface and are absent in human alpha-lactalbumin, which is homologous to human lysozyme in amino acid sequence and tertiary structure. The stability of both mutants would be expected to increase due to a decrease in conformational entropy in the denatured state; however, both proteins were destabilized. The destabilizations were mainly caused by the disappearance of intramolecular hydrogen bonds. Each part deleted was recovered by the turn region like the alpha-lactalbumin structure, but there were differences in the main-chain conformation of the turn between each deletion mutant and alpha-lactalbumin even if the loop length was the same. For the point mutants, R50G, Q58G, H78G, and G37Q, the main-chain conformations of these substitution residues located in turns adopt a left-handed helical region in the wild-type structure. It is thought that the left-handed non-Gly residue has unfavorable conformational energy compared to the left-handed Gly residue. Q58G was stabilized, but the others had little effect on the stability. The structural analysis revealed that the turns could rearrange the main-chain conformation to accommodate the left-handed non-Gly residues. The present results indicate that turn structures are able to change their main-chain conformations, depending upon the side-chain features of amino acid residues on the turns. Furthermore, stopped-flow GuHCl denaturation experiments on the six mutants were performed. The effects of mutations on unfolding-refolding kinetics were significantly different among the mutant proteins. The deletion/substitutions in turns located in the alpha-domain of human lysozyme affected the refolding rate, indicating the contribution of turn structures to the folding of a globular protein.     

Dead‐end elimination with perturbations (DEEPer): A provable protein design algorithm with continuous sidechain and backbone flexibility

Computational protein and drug design generally require accurate modeling of protein conformations. This modeling typically starts with an experimentally determined protein structure and considers possible conformational changes due to mutations or new ligands. The DEE/A* algorithm provably finds the global minimum‐energy conformation (GMEC) of a protein assuming that the backbone does not move and the sidechains take on conformations from a set of discrete, experimentally observed conformations called rotamers. DEE/A* can efficiently find the overall GMEC for exponentially many mutant sequences. Previous improvements to DEE/A* include modeling ensembles of sidechain conformations and either continuous sidechain or backbone flexibility. We present a new algorithm, DEEPer (D ead‐E nd E limination with Per turbations), that combines these advantages and can also handle much more extensive backbone flexibility and backbone ensembles. DEEPer provably finds the GMEC or, if desired by the user, all conformations and sequences within a specified energy window of the GMEC. It includes the new abilities to handle arbitrarily large backbone perturbations and to generate ensembles of backbone conformations. It also incorporates the shear, an experimentally observed local backbone motion never before used in design. Additionally, we derive a new method to accelerate DEE/A*‐based calculations, indirect pruning, that is particularly useful for DEEPer. In 67 benchmark tests on 64 proteins, DEEPer consistently identified lower‐energy conformations than previous methods did, indicating more accurate modeling. Additional tests demonstrated its ability to incorporate larger, experimentally observed backbone conformational changes and to model realistic conformational ensembles. These capabilities provide significant advantages for modeling protein mutations and protein–ligand interactions. Proteins 2013. © 2012 Wiley Periodicals, Inc.     

A tetrapeptide fragment-based design method results in highly stable artificial proteins

Computational protein design has progressed rapidly over the last years. A number of design methods have been proposed and tested. In this paper, we report the successful application of a fragment-based method for protein design. The method uses statistical information on tetrapeptide backbone conformations. The previously published artificial fold of TOP 7 (Kuhlman et al., Science, 2003; 302:1364-1368) was chosen as template. A series of polypeptide sequences were created that were predicted to fold into this target structure. Two of the designed proteins, M5 and M7, were expressed and characterized by fluorescence spectroscopy, circular dichroism and NMR. They showed the hallmarks of well-ordered tertiary structure as well as cooperative folding/unfolding transitions. Furthermore, the two novel proteins were found to be highly stable against temperature and denaturant-induced unfolding.     

Folding propensities of peptide fragments of myoglobin.

Myoglobin has been studied extensively as a paradigm for protein folding. As part of an ongoing study of potential folding initiation sites in myoglobin, we have synthetized a series of peptides covering the entire sequence of sperm whale myoglobin. We report here on the conformation preferences of a series of peptides that cover the region from the A helix to the FG turn. Structural propensities were determined using circular dichroism and nuclear magnetic resonance spectroscopy in aqueous solution, trifluoroethanol, and methanol. Peptides corresponding to helical regions in the native protein, namely the B, C, D, and E helices, populate the alpha region of (phi, psi) space in water solution but show no measurable helix formation except in the presence of trifluoroethanol. The F-helix sequence has a much lower propensity to populate helical conformations even in TFE. Despite several attempts, we were not successful in synthesizing a peptide corresponding to the A-helix region that was soluble in water. A peptide termed the AB domain was constructed spanning the A- and B-helix sequences. The AB domain is not soluble in water, but shows extensive helix formation throughout the peptide when dissolved in methanol, with a break in the helix at a site close to the A-B helix junction in the intact folded myoglobin protein. With the exception of one local preference for a turn conformation stabilized by hydrophobic interactions, the peptides corresponding to turns in the folded protein do not measurably populate beta-turn conformations in water, and the addition of trifluoroethanol does not enhance the formation of either helical or turn structure. In contrast to the series of peptides described here, either studies of peptides from the GH region of myoglobin show a marked tendency to populate helical structures (H), nascent helical structures (G), or turn conformations (GH peptide) in water solution. This region, together with the A-helix and part of the B-helix, has been shown to participate in an early folding intermediate. The complete analysis of conformational properties of isolated myoglobin peptides supports the hypothesis that spontaneous secondary structure formation in local regions of the polypeptide may play an important role in the initiation of protein folding.     

Folding of peptide fragments comprising the complete sequence of proteins. Models for initiation of protein folding. II. Plastocyanin.

In an attempt to understand the earliest events in the protein folding pathway, the complete sequence of French bean plastocyanin has been synthesized as a series of short peptide fragments, and the conformational preferences of each peptide examined in aqueous solution using proton n.m.r. methods. Plastocyanin consists largely of beta-sheet, with reverse turns and loops between the strands of the sheet, and one short helix. The n.m.r. experiments indicate that most of the peptides derived from the plastocyanin sequence have remarkably little propensity to adopt folded conformations in aqueous solution, in marked contrast to the peptides derived from the helical protein, myohemerythrin (accompanying paper). For most plastocyanin peptides, the backbone dihedral angles are predominantly in the beta-region of conformational space. Some of the peptides show weak NOE connectivities between adjacent amide protons, indicative of small local populations of backbone conformations in the a region of (phi,psi) space. A conformational preference for a reverse turn is seen in the sequence Ala65-Pro-Gly-Glu68, where a turn structure is found in the folded protein. Significantly, the peptide sequences that populate the alpha-region of (phi,psi) space are mostly derived from turn and loop regions in the protein. The addition of trifluoroethanol does not drive the peptides into helical conformations. In one region of the sequence, the n.m.r. spectra provide evidence of the formation of a hydrophobic cluster involving aromatic and aliphatic side-chains. These results have significance for understanding the initiation of protein folding. From these studies of the fragments of plastocyanin (this paper) and myohemerythrin (accompanying paper), it appears that there is a pre-partitioning of the conformational space sampled by the polypeptide backbone that is related to the secondary structure in the final folded state.     

De novo design of the hydrophobic core of ubiquitin.

We have previously reported the development and evaluation of a computational program to assist in the design of hydrophobic cores of proteins. In an effort to investigate the role of core packing in protein structure, we have used this program, referred to as Repacking of Cores (ROC), to design several variants of the protein ubiquitin. Nine ubiquitin variants containing from three to eight hydrophobic core mutations were constructed, purified, and characterized in terms of their stability and their ability to adopt a uniquely folded native-like conformation. In general, designed ubiquitin variants are more stable than control variants in which the hydrophobic core was chosen randomly. However, in contrast to previous results with 434 cro, all designs are destabilized relative to the wild-type (WT) protein. This raises the possibility that beta-sheet structures have more stringent packing requirements than alpha-helical proteins. A more striking observation is that all variants, including random controls, adopt fairly well-defined conformations, regardless of their stability. This result supports conclusions from the cro studies that non-core residues contribute significantly to the conformational uniqueness of these proteins while core packing largely affects protein stability and has less impact on the nature or uniqueness of the fold. Concurrent with the above work, we used stability data on the nine ubiquitin variants to evaluate and improve the predictive ability of our core packing algorithm. Additional versions of the program were generated that differ in potential function parameters and sampling of side chain conformers. Reasonable correlations between experimental and predicted stabilities suggest the program will be useful in future studies to design variants with stabilities closer to that of the native protein. Taken together, the present study provides further clarification of the role of specific packing interactions in protein structure and stability, and demonstrates the benefit of using systematic computational methods to predict core packing arrangements for the design of proteins.     

A large scale test of computational protein design: folding and stability of nine completely redesigned globular proteins

A previously developed computer program for protein design, RosettaDesign, was used to predict low free energy sequences for nine naturally occurring protein backbones. RosettaDesign had no knowledge of the naturally occurring sequences and on average 65% of the residues in the designed sequences differ from wild-type. Synthetic genes for ten completely redesigned proteins were generated, and the proteins were expressed, purified, and then characterized using circular dichroism, chemical and temperature denaturation and NMR experiments. Although high-resolution structures have not yet been determined, eight of these proteins appear to be folded and their circular dichroism spectra are similar to those of their wild-type counterparts. Six of the proteins have stabilities equal to or up to 7kcal/mol greater than their wild-type counterparts, and four of the proteins have NMR spectra consistent with a well-packed, rigid structure. These encouraging results indicate that the computational protein design methods can, with significant reliability, identify amino acid sequences compatible with a target protein backbone.     

Determination of the conformation of folding initiation sites in proteins by computer simulation

Experimental evidence and theoretical models both suggest that protein folding begins by specific short regions of the polypeptide chain intermittently assuming conformations close to their final ones. The independent folding properties and small size of these folding initiation sites make them suitable subjects for computational methods aimed at deriving structure from sequence. We have used a torsion space Monte Carlo procedure together with an all-atom free energy function to investigate the folding of a set of such sites. The free energy function is derived by a potential of mean force analysis of experimental protein structures. The most important contributions to the total free energy are the local main chain electrostatics, main chain hydrogen bonds, and the burial of nonpolar area. Six proposed independent folding units and four control peptides 11–14 residues long have been investigated. Thirty Monte Carlo simulations were performed on each peptide, starting from different random conformations. Five of the six folding units adopted conformations close to the experimental ones in some of the runs. None of the controls did so, as expected. The generated conformations which are close to the experimental ones have among the lowest free energies encountered, although some less native like low free energy conformations were also found. The effectiveness of the method on these peptides, which have a wide variety of experimental conformations, is encouraging in two ways: First, it provides independent evidence that these regions of the sequences are able to adopt native like conformations early in folding, and therefore are most probably key components of the folding pathways. Second, it demonstrates that available simulation methods and free energy functions are able to produce reasonably accurate structures. Extensions of the methods to the folding of larger portions of proteins are suggested. © 1995 Wiley-Liss, Inc.     

Refolding simulations of an isolated fragment of barnase into a native-like β hairpin: Evidence for compactness and hydrogen bonding as concurrent stabilizing factors

Experimental evidence and theoretical models both suggest that protein folding is initiated within specific fragments intermittently adopting conformations close to that found in the protein native structure. These folding initiation sites encompassing short portions of the protein are ideally suited for study in isolation by computational methods aimed at peering into the very early events of folding. We have used Molecular Dynamics (MD) technique to investigate the behavior of an isolated protein fragment formed by residues 85 to 102 of barnase that folds into a β hairpin in the protein native structure. Three independent MD simulations of 1.3 to 1.8 ns starting from unfolded conformations of the peptide portrayed with an all-atom model in water were carried out at gradually decreasing temperature. A detailed analysis of the conformational preferences adopted by this peptide in the course of the simulations is presented. Two of the unfolded peptide conformations fold into a hairpin characterized by native and a larger bulk of nonnative interactions. Both refolding simulations substantiate the close relationship between interstrand compactness and hydrogen bonding network involving backbone atoms. Persistent compactness witnessed by side-chain interactions always occurs concomitantly with the formation of backbone hydrogen bonds. No highly populated conformations generated in a third simulation starting from the remotest unfolded conformer relative to the native structure are observed. However, nonnative long-range and medium-range contacts with the aromatic moiety of Trp94 are spotted, which are in fair agreement with a former nuclear magnetic resonance study of a denaturing solution of an isolated barnase fragment encompassing the β hairpin. All this lends reason to believe that the 85–102 barnase fragment is a strong initiation site for folding. Proteins 29:212–227, 1997. © 1997 Wiley-Liss, Inc.     

A thermodynamic and kinetic analysis of the folding pathway of an SH3 domain entropically stabilised by a redesigned hydrophobic core

The folding thermodynamics and kinetics of the alpha-spectrin SH3 domain with a redesigned hydrophobic core have been studied. The introduction of five replacements, A11V, V23L, M25V, V44I and V58L, resulted in an increase of 16% in the overall volume of the side-chains forming the hydrophobic core but caused no remarkable changes to the positions of the backbone atoms. Judging by the scanning calorimetry data, the increased stability of the folded structure of the new SH3-variant is caused by entropic factors, since the changes in heat capacity and enthalpy upon the unfolding of the wild-type and mutant proteins were identical at 298 K. It appears that the design process resulted in an increase in burying both the hydrophobic and hydrophilic surfaces, which resulted in a compensatory effect upon the changes in heat capacity and enthalpy. Kinetic analysis shows that both the folding and unfolding rate constants are higher for the new variant, suggesting that its transition state becomes more stable compared to the folded and unfolded states. The phi(double dagger-U) values found for a number of side-chains are slightly lower than those of the wild-type protein, indicating that although the transition state ensemble (TSE) did not change overall, it has moved towards a more denatured conformation, in accordance with Hammond's postulate. Thus, the acceleration of the folding-unfolding reactions is caused mainly by an improvement in the specific and/or non-specific hydrophobic interactions within the TSE rather than by changes in the contact order. Experimental evidence showing that the TSE changes globally according to its hydrophobic content suggests that hydrophobicity may modulate the kinetic behaviour and also the folding pathway of a protein.     

Redesigning the hydrophobic core of a four-helix-bundle protein.

Rationally redesigned variants of the 4-helix-bundle protein Rop are described. The novel proteins have simplified, repacked, hydrophobic cores and yet reproduce the structure and native-like physical properties of the wild-type protein. The repacked proteins have been characterized thermodynamically and their equilibrium and kinetic thermal and chemical unfolding properties are compared with those of wild-type Rop. The equilibrium stability of the repacked proteins to thermal denaturation is enhanced relative to that of the wild-type protein. The rate of chemically induced folding and unfolding of wild-type Rop is extremely slow when compared with other small proteins. Interestingly, although the repacked proteins are more thermally stable than the wild type, their rates of chemically induced folding and unfolding are greatly increased in comparison to wild type. Perhaps as a consequence of this, their equilibrium stabilities to chemical denaturants are slightly reduced in comparison to the wild type.     

Exploring sequence constraints on an interhelical turn using in vivo selection for catalytic activity.

The role of interhelical turns in determining protein structure has been investigated previously in relatively simple four-helix-bundle proteins using combinatorial mutagenesis coupled with screening for functional variants. To assess the tolerance to sequence substitution of a short, interhelical turn in a larger, more complicated protein, we have exploited a more sensitive in vivo selection for catalytic activity. Randomization of three solvent-exposed turn residues in Escherichia coli chorismate mutase (Ala65, His66, and His67), followed by selection, indicated that >63% of tripeptides, including some with significantly altered backbone conformations, can functionally replace the native sequence. The increased sensitivity of the catalytic assay allowed optimal sequences to be distinguished from less appropriate ones, revealing a statistically significant preference for hydrophilic residues in solvent-exposed positions. It also enabled investigation of the extent to which either secondary structure or tertiary interactions influence substitution patterns. Randomization of an alpha-helical residue (Lys64), together with the adjacent solvent-exposed tripeptide, Ala65-His66-His67, showed that the secondary structure at position 64 does not limit the range of side chains allowed at this site. In contrast, randomization of a buried turn residue (Leu68), together with the same tripeptide, revealed an extremely strict requirement for hydrophobic aliphatic amino acids at this position. The strong constraint imposed by the tertiary interaction, in contrast to the weak influence of secondary structure, has important implications for protein design.     

Backbone-driven collapse in unfolded protein chains

Collapse of unfolded protein chains is an early event in folding. It affects structural properties of intrinsically disordered proteins, which take a considerable fraction of the human proteome. Collapse is generally believed to be driven by hydrophobic forces imposed by the presence of nonpolar amino acid side chains. Contributions from backbone hydrogen bonds to protein folding and stability, however, are controversial. To date, the experimental dissection of side-chain and backbone contributions has not yet been achieved because both types of interactions are integral parts of protein structure. Here, we realized this goal by applying mutagenesis and chemical modification on a set of disordered peptides and proteins. We measured the protein dimensions and kinetics of intra-chain diffusion of modified polypeptides at the level of individual molecules using fluorescence correlation spectroscopy, thereby avoiding artifacts commonly caused by aggregation of unfolded protein material in bulk. We found no contributions from side chains to collapse but, instead, identified backbone interactions as a source sufficient to form globules of native-like dimensions. The presence of backbone hydrogen bonds decreased polypeptide water solubility dramatically and accelerated the nanosecond kinetics of loop closure, in agreement with recent predictions from computer simulation. The presence of side chains, instead, slowed loop closure and modulated the dimensions of intrinsically disordered domains. It appeared that the transient formation of backbone interactions facilitates the diffusive search for productive conformations at the early stage of folding and within intrinsically disordered proteins.