Structure and orientation of peptide inhibitors bound to beta-amyloid fibrils

Polymerization of the soluble beta-amyloid peptide into highly ordered fibrils is hypothesized to be a causative event in the development of Alzheimer's disease. Understanding the interactions of Abeta with inhibitors on an atomic level is fundamental for the development of diagnostics and therapeutic approaches, and can provide, in addition, important indirect information of the amyloid fibril structure. We have shown recently that trRDCs can be measured in solution state NMR for peptide ligands binding weakly to amyloid fibrils. We present here the structures for two inhibitor peptides, LPFFD and DPFFL, and their structural models bound to fibrillar Abeta(14-23) and Abeta(1-40) based on transferred nuclear Overhauser effect (trNOE) and transferred residual dipolar coupling (trRDC) data. In a first step, the inhibitor peptide structure is calculated on the basis of trNOE data; the trRDC data are then validated on the basis of the trNOE-derived structure using the program PALES. The orientation of the peptide inhibitors with respect to Abeta fibrils is obtained from trRDC data, assuming that Abeta fibrils orient such that the fibril axis is aligned in parallel with the magnetic field. The trRDC-derived alignment tensor of the peptide ligand is then used as a restraint for molecular dynamics docking studies. We find that the structure with the lowest rmsd value is in agreement with a model in which the inhibitor peptide binds to the long side of an amyloid fibril. Especially, we detect interactions involving the hydrophobic core, residues K16 and E22/D23 of the Abeta sequence. Structural differences are observed for binding of the inhibitor peptide to Abeta14-23 and Abeta1-40 fibrils, respectively, indicating different fibril structure. We expect this approach to be useful in the rational design of amyloid ligands with improved binding characteristics.     

Polymorphic fibril formation by residues 10-40 of the Alzheimer's beta-amyloid peptide

We report investigations of the morphology and molecular structure of amyloid fibrils comprised of residues 10-40 of the Alzheimer's beta-amyloid peptide (Abeta(10-40)), prepared under various solution conditions and degrees of agitation. Omission of residues 1-9 from the full-length Alzheimer's beta-amyloid peptide (Abeta(1-40)) did not prevent the peptide from forming amyloid fibrils or eliminate fibril polymorphism. These results are consistent with residues 1-9 being disordered in Abeta(1-40) fibrils, and show that fibril polymorphism is not a consequence of disorder in residues 1-9. Fibril morphology was analyzed by atomic force and electron microscopy, and secondary structure and inter-side-chain proximity were probed using solid-state NMR. Abeta(1-40) fibrils were found to be structurally compatible with Abeta(10-40): Abeta(1-40) fibril fragments were used to seed the growth of Abeta(10-40) fibrils, with propagation of fibril morphology and molecular structure. In addition, comparison of lyophilized and hydrated fibril samples revealed no effect of hydration on molecular structure, indicating that Abeta(10-40) fibrils are unlikely to contain bulk water.     

Gerstmann-Sträussler-Scheinker disease amyloid protein polymerizes according to the "dock-and-lock" model

Prion protein (PrP) amyloid formation is a central feature of genetic and acquired prion diseases such as Gerstmann-Str?ussler-Scheinker disease (GSS) and variant Creutzfeldt-Jakob disease. The major component of GSS amyloid is a PrP fragment spanning residues approximately 82-146, which when synthesized as a peptide, readily forms fibrils featuring GSS amyloid. The present study employed surface plasmon resonance (SPR) to characterize the binding events underlying PrP82-146 oligomerization at the first stages of fibrillization, according to evidence suggesting a pathogenic role of prefibrillar oligomers rather than mature amyloid fibrils. We followed in real time the binding reactions occurring during short term (seconds) addition of PrP82-146 small oligomers (1-5-mers, flowing species) onto soluble prefibrillar PrP82-146 aggregates immobilized on the sensor surface. SPR data confirmed very efficient aggregation/elongation, consistent with the hypothesis of nucleation-dependent polymerization process. Much lower binding was observed when PrP82-146 flowed onto the scrambled sequence of PrP82-146 or onto prefibrillar Abeta42 aggregates. As previously found with Abeta40, SPR data could be adequately fitted by equations modeling the "dock-and-lock" mechanism, in which the "locking" step is due to sequential conformational changes, each increasing the affinity of the monomer for the fibril until a condition of irreversible binding is reached. However, these conformational changes (i.e. the locking steps) appear to be faster and easier with PrP82-146 than with Abeta40. Such differences suggest that PrP82-146 has a greater propensity to polymerize and greater stability of the aggregates.     

Amyloid formation via supramolecular peptide assemblies

Amyloid fibrils have been classically defined as linear, nonbranched polymeric proteins with a cross beta-sheet structure and the ability to alter the optical properties of the amyloid-specific dye Congo Red. Mounting evidence suggests that soluble oligomeric peptide assemblies approximately 2-20 nm in diameter are critical intermediates in amyloid formation. Using a pathogenic prion protein peptide comprised of residues 23-144, we demonstrate that, under quiescent but not agitated conditions, much larger globular assemblies up to 1 mum in diameter are made. These globules precede fibril formation and directly interact with growing fibril bundles. Fibrils made via these large spherical peptide assemblies displayed a remarkable diversity of ultrastructural features. Fibrillization of the Abeta1-40 peptide under similar conditions yielded similar results, suggesting a mechanism of general amyloid formation that can proceed through intermediates much larger than those previously described. Our data suggest that simply changing the physical microenvironment can profoundly influence the mechanism of amyloid formation and yield fibrils with novel ultrastructural properties.     

Structural differences in Abeta amyloid protofibrils and fibrils mapped by hydrogen exchange--mass spectrometry with on-line proteolytic fragmentation

We report here structural differences between Abeta(1-40) protofibrils and mature amyloid fibrils associated with Alzheimer's disease as determined using hydrogen-deuterium exchange-mass spectrometry (HX-MS) coupled with on-line proteolysis. Specifically, we have identified regions of the Abeta(1-40) peptide containing backbone amide hydrogen atoms that are protected from HX or exposed when this peptide is incorporated into protofibrils or amyloid fibrils formed in phosphate-buffered saline without stirring at 37 degrees C. Study of protofibrils was facilitated by use of the protofibril-stabilizing agent calmidazolium chloride. Our data clearly show that both the C-terminal segment 35-40 and the N-terminal segment 1-19 are highly exposed to HX in both fibrils and protofibrils. In contrast, the internal fragment 20-34 is highly protected from exchange in fibrils but much less so in protofibrils. The data suggest that the beta-sheet elements comprising the amyloid fibril are already present in protofibrils, but that they are expanded into some adjacent residues upon the formation of mature amyloid. The N-terminal approximately ten residues appear to be unstructured in both protofibrils and fibrils. The 20-30 segment of Abeta(1-40) is more ordered in fibrils than in protofibrils, suggesting that, if protofibrils are a mechanistic precursor of fibrils, the transition from protofibril to fibril involves substantial ordering of this region of the Abeta peptide.     

Scanning cysteine mutagenesis analysis of Abeta-(1-40) amyloid fibrils

We describe here the use of cysteine substitution mutants in the Alzheimer disease amyloid plaque peptide Abeta-(1-40) to probe amyloid fibril structure and stabilization. In one approach, amyloid fibrils were grown from Cys mutant peptides under reducing conditions and then challenged with an alkylating agent to probe solvent accessibility of different residues in the fibril. In another approach, monomeric Cys mutants, either in the thiol form or modified with iodoacetic acid or methyl iodide, were grown into amyloid fibrils, and the equilibrium position at the end of the amyloid formation reaction was quantified by determining the concentration of monomeric Abeta. The DeltaG values of fibril elongation obtained were then compared in order to provide information on the environment of each residue side chain in the fibril. In general, Cys residues in the N and C termini of Abeta-(1-40) were not only accessible to alkylation in the fibril state but also, when modified in the monomeric state, did not greatly impact fibril stability; these observations were consistent with previous indications that these portions of the peptide are not part of the amyloid core. In contrast, residues 16-19 and 31-34 were not only uniformly inaccessible to alkylation in the fibril state, but their modification with the negatively charged carboxymethyl group in monomeric Abeta also destabilized fibril elongation, confirming other data showing that these segments are likely packed into a hydrophobic amyloid core. Residues 20, 30, and 35, flanking these implicated beta-sandwich regions, are accessible to alkylation in the fibril indicating a location in solvent exposed structure.     

A conformation change in the carboxyl terminus of Alzheimer's Abeta (1-40) accompanies the transition from dimer to fibril as revealed by fluorescence quenching analysis

Alzheimer's disease is characterized by the presence of insoluble, fibrous deposits composed principally of amyloid beta (Abeta) peptide. A number of studies have provided information on the fibril structure and on the factors affecting fiber formation, but the details of the fibril structure are not known. We used fluorescence quenching to investigate the solvent accessibility and surface charge of the soluble Abeta(1-40) dimer and amyloid fibrils. Analogs of Abeta(1-40) containing a single tryptophan were synthesized by substituting residues at positions 4, 10, 34, and 40 with tryptophan. Quenching measurements in the dimeric state indicate that the amino-terminal analogs (AbetaF4W and AbetaY10W) are accessible to polar quenchers, and the more carboxyl-terminal analog AbetaV34W is less accessible. AbetaV40W, on the other hand, exhibits a low degree of quenching, indicating that this residue is highly shielded from the solvent in the dimeric state. Correcting for the effect of reduced translational and rotational diffusion, fibril formation was associated with a selective increase in solvent exposure of residues 34 and 40, suggesting that a conformation change may take place in the carboxyl-terminal region coincident with the dimer to fibril transition.     

Humoral immune response to fibrillar beta-amyloid peptide

The beta-amyloid peptide (Abeta) is a normal product of the proteolytic processing of its precursor (beta-APP). Normally, it elicits a very low humoral immune response; however, the aggregation of monomeric Abeta to form fibrillar Abeta amyloid creates a neo-epitope, to which antibodies are generated. Rabbits were injected with fibrillar human Abeta(1-42), and the resultant antibodies were purified and their binding properties characterized. The antibodies bound to an epitope in the first eight residues of Abeta and required a free amino terminus. Additional residues did not affect the affinity of the epitope as long as the peptide was unaggregated; the antibody bound Abeta residues 1-8, 1-11, 1-16, 1-28, 1-40, and 1-42 with similar affinities. In contrast, the antibodies bound approximately 1000-fold more tightly to fibrillar Abeta(1-42). Their enhanced affinity did not result from their bivalent nature: monovalent Fab fragments exhibited a similar affinity for the fibrils. Nor did it result from the particulate nature of the epitope: monomeric Abeta(1-16) immobilized on agarose and soluble Abeta(1-16) exhibited similar affinities for the antifibrillar antibodies. In addition, antibodies raised to four nonfibrillar peptides corresponding to internal Abeta sequences did not exhibit enhanced affinity for fibrillar Abeta(1-42). Antibodies directed to the C-terminus of Abeta bound poorly to fibrillar Abeta(1-42), which is consistent with models where the carboxyl terminus is buried in the interior of the fibril and the amino terminus is on the surface. When used as an immunohistochemical probe, the antifibrillar Abeta(1-42) IgG exhibited enhanced affinity for amyloid deposits in the cerebrovasculature. We hypothesize either that the antibodies recognize a specific conformation of the eight amino-terminal residues of Abeta, which is at least 1000-fold more favored in the fibril than in monomeric peptides, or that affinity maturation of the antibodies produces an additional binding site for the amino-terminal residues of an adjacent Abeta monomer. In vivo this specificity would direct the antibody primarily to fibrillar vascular amyloid deposits even in the presence of a large excess of monomeric Abeta or its precursor. This observation may explain the vascular meningeal inflammation that developed in Alzheimer's disease patients immunized with fibrillar Abeta. Passive immunization with an antibody directed to an epitope hidden in fibrillar Abeta and in the transmembrane region of APP might be a better choice in the search for an intervention to remove Abeta monomers without provoking an inflammatory response.     

Direct observation of Abeta amyloid fibril growth and inhibition

Amyloid fibril formation is a phenomenon common to many proteins and peptides, including amyloid beta (Abeta) peptide associated with Alzheimer's disease. To clarify the mechanism of fibril formation and to create inhibitors, real-time monitoring of fibril growth is essential. Here, seed-dependent amyloid fibril growth of Abeta(1-40) was visualized in real-time at the single fibril level using total internal reflection fluorescence microscopy (TIRFM) combined with the binding of thioflavin T, an amyloid-specific fluorescence dye. The clear image and remarkable length of the fibrils enabled an exact analysis of the rate of growth of individual fibrils, indicating that the fibril growth was a highly cooperative process extending the fibril ends at a constant rate. It has been known that Abeta amyloid formation is a stereospecific reaction and the stability is affected by l/d-amino acid replacement. Focusing on these aspects, we designed several analogues of Abeta(25-35), a cytotoxic fragment of Abeta(1-40), consisting of l and d-amino acid residues, and examined their inhibitory effects by TIRFM. Some chimeric Abeta(25-35) peptides inhibited the fibril growth of Abeta(25-35) strongly, although they could not inhibit the growth of Abeta(1-40). The results suggest that a more rational design of stereospecific inhibitors, combined with real-time monitoring of fibril growth, will be useful to invent a potent inhibitor preventing the amyloid fibril growth of Abeta(1-40) and other proteins.     

Exaggerated polymerisation of beta-amyloid 40 stimulated by plasma lipoproteins results in fibrillar Abeta preparations that are ineffective in promoting ADP-induced platelet aggregation

The cytotoxic beta-amyloid peptide (Abeta) of Alzheimer's disease (AD) occurs in both plasma and platelets and may modulate platelet function. Its biological activity may relate to its fibril content and factors that promote Abeta fibrillogenesis, e.g., plasma lipoproteins could, therefore, have implications for Abeta action. We undertook a study in which structure-activity relationships were considered with respect to the actions of Abeta(1-40) on platelet function. Thus, the influence of soluble Abeta and various fibrillar Abeta preparations (0.1-10 microM) on platelet aggregation and endogenous 5-hydroxytryptamine (5-HT) efflux was investigated. Soluble Abeta(1-40) only enhanced platelet aggregation (+30%, P<0.05) and 5-HT release (+28%) stimulated by ADP (1 microM) at the highest concentration tested (10 microM). By contrast, fibrillar Abeta(1-40) at 1, 5 and 10 microM potentiated aggregation by 17.4%, 68.8% (P<0.05) and 99.5% (P<0.0001), respectively, and 5-HT efflux by 17.4%, 65% and 208% (P<0.001). Abeta(1-40) fibrils generated in the presence of native and oxidised very low-density lipoprotein (VLDL), low-density lipoprotein (LDL) and high-density lipoprotein (HDL) yielded platelet responses that did not differ from those seen with the lipoproteins alone. These responses were markedly lower than those obtained with homogeneous Abeta fibrils. Our data indicate that homogeneous Abeta(1-40) fibrils are more potent than soluble Abeta(1-40) in promoting platelet reactivity and that interactions with plasma lipoproteins result in the formation of Abeta fibrils that are ineffective. We suggest that lipoproteins may interfere with the recognition of Abeta by appropriate platelet receptors and/or cause Abeta to assume an "overaggregated" biologically inert state.     

Alanine scanning mutagenesis of Abeta(1-40) amyloid fibril stability

We describe here an alanine scanning mutational analysis of the Abeta(1-40) amyloid fibril monitored by fibril elongation thermodynamics derived from critical concentration values for fibril growth. Alanine replacement of most residues in the amyloid core region, residues 15-36, leads to destabilization of the elongation step, compared to wild-type, by about 1kcal/mol, consistent with a major role for hydrophobic packing in Abeta(1-40) fibril assembly. Where comparisons are possible, the destabilizing effects of Ala replacements are generally in very good agreement with the effects of Ala replacements of the same amino acid residues in an element of parallel beta-sheet in the small, globular protein Gbeta1. We utilize these Ala-WT DeltaDeltaG values to filter previously described Pro-WT DeltaDeltaG values, creating Pro-Ala DeltaDeltaG values that specifically assess the sensitivity of a sequence position, in the structural context of the Abeta fibril, to replacement by proline. The results provide a conservative view of the energetics of Abeta(1-40) fibril structure, indicating that positions 18-21, 25-26, and 32-33 within amyloid structure are particularly sensitive to the main-chain disrupting effects of Pro replacements. In contrast, residues 14-17, 22, 24, 27-31, and 34-39 are relatively insensitive to Pro replacements; most N-terminal residues were not tested. The results are discussed in terms of amyloid fibril structure and folding energetics, in particular focusing on how the data compare to those from other structural studies of Abeta(1-40) amyloid fibrils grown in phosphate-buffered saline at 37 degrees C under unstirred ("quiescent") conditions.     

Seeding specificity in amyloid growth induced by heterologous fibrils

Over residues 15-36, which comprise the H-bonded core of the amyloid fibrils it forms, the Alzheimer's disease plaque peptide amyloid beta (Abeta) possesses a very similar sequence to that of another short, amyloidogenic peptide, islet amyloid polypeptide (IAPP). Using elongation rates to quantify seeding efficiency, we inquired into the relationship between primary sequence similarity and seeding efficiency between Abeta-(1-40) and amyloid fibrils produced from IAPP as well as other proteins. In both a solution phase and a microtiter plate elongation assay, IAPP fibrils are poor seeds for Abeta-(1-40) elongation, exhibiting weight-normalized efficiencies of only 1-2% compared with Abeta-(1-40) fibrils. Amyloid fibrils of peptides with sequences completely unrelated to Abeta also exhibit poor to negligible seeding ability for Abeta elongation. Fibrils from a number of point mutants of Abeta-(1-40) exhibit intermediate seeding abilities for wild-type Abeta elongation, with differing efficiencies depending on whether or not the mutation is in the amyloid core region. The results suggest that amyloid fibrils from different proteins exhibit structural differences that control seeding efficiencies. Preliminary results also suggest that identical sequences can grow into different conformations of amyloid fibrils as detected by seeding efficiencies. The results have a number of implications for amyloid structure and biology.     

Effect of different anti-Abeta antibodies on Abeta fibrillogenesis as assessed by atomic force microscopy

Extensive data suggest that the conversion of the amyloid-beta (Abeta) peptide from soluble to insoluble forms is a key factor in the pathogenesis of Alzheimer's disease (AD). In recent years, atomic force microscopy (AFM) has provided useful insights into the physicochemical processes involving Abeta morphology, and it can now be used to explore factors that either inhibit or promote fibrillogenesis. We used ex situ AFM to explore the impact of anti-Abeta antibodies directed against different domains of Abeta on fibril formation. For the AFM studies, two monoclonal antibodies (m3D6 and m266.2) were incubated in solution with Abeta(1-42) with a molar ratio of 1:10 (antibody to Abeta) over several days. Fibril formation was analyzed quantitatively by determining the number of fibrils per microm(2) and by aggregate size analysis. m3D6, which is directed against an N-terminal domain of Abeta (amino acid residues 1-5) slowed down fibril formation. However, m266.2, which is directed against the central domain of Abeta (amino acid residues 13-28) appeared to completely prevent the formation of fibrils over the course of the experiment. Inhibition of fibril formation by both antibodies was also confirmed by thioflavin-T (ThT) fluorescence experiments carried out with Abeta(1-40) incubated for five days. However, unlike AFM results, ThT did not differentiate between the samples incubated with m3D6 versus m266.2. These results indicate that AFM can be not only reliably used to study the effect of different molecules on Abeta aggregation, but that it can provide additional information such as the role of epitope specificity of antibodies as potential inhibitors of fibril formation.     

Supramolecular structural constraints on Alzheimer's beta-amyloid fibrils from electron microscopy and solid-state nuclear magnetic resonance

We describe electron microscopy (EM), scanning transmission electron microscopy (STEM), and solid-state nuclear magnetic resonance (NMR) measurements on amyloid fibrils formed by the 42-residue beta-amyloid peptide associated with Alzheimer's disease (Abeta(1)(-)(42)) and by residues 10-35 of the full-length peptide (Abeta(10)(-)(35)). These measurements place constraints on the supramolecular structure of the amyloid fibrils, especially the type of beta-sheets present in the characteristic amyloid cross-beta structural motif and the assembly of these beta-sheets into a fibril. EM images of negatively stained Abeta(10)(-)(35) fibrils and measurements of fibril mass per length (MPL) by STEM show a strong dependence of fibril morphology and MPL on pH. Abeta(10)(-)(35) fibrils formed at pH 3.7 are single "protofilaments" with MPL equal to twice the value expected for a single cross-beta layer. Abeta(10)(-)(35) fibrils formed at pH 7.4 are apparently pairs of protofilaments or higher order bundles. EM and STEM data for Abeta(1)(-)(42) fibrils indicate that protofilaments with MPL equal to twice the value expected for a single cross-beta layer are also formed by Abeta(1)(-)(42) and that these protofilaments exist singly and in pairs at pH 7.4. Solid-state NMR measurements of intermolecular distances in Abeta(10)(-)(35) fibrils, using multiple-quantum (13)C NMR, (13)C-(13)C dipolar recoupling, and (15)N-(13)C dipolar recoupling techniques, support the in-register parallel beta-sheet organization previously established by Lynn, Meredith, Botto, and co-workers [Benzinger et al. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 13407-13412; Benzinger et al. (2000) Biochemistry 39, 3491-3499] and show that this beta-sheet organization is present at pH 3.7 as well as pH 7.4 despite the differences in fibril morphology and MPL. Solid-state NMR measurements of intermolecular distances in Abeta(1)(-)(42) fibrils, which represent the first NMR data on Abeta(1)(-)(42) fibrils, also indicate an in-register parallel beta-sheet organization. These results, along with previously reported data on Abeta(1)(-)(40) fibrils, suggest that the supramolecular structures of Abeta(10)(-)(35), Abeta(1)(-)(40), and Abeta(1)(-)(42) fibrils are quite similar. A schematic structural model of these fibrils, consistent with known experimental EM, STEM, and solid-state NMR data, is presented.     

Mechanical manipulation of Alzheimer's amyloid beta1-42 fibrils

The 39- to 42-residue-long amyloid beta-peptide (Abeta-peptide) forms filamentous structures in the neuritic plaques found in the neuropil of Alzheimer's disease patients. The assembly and deposition of Abeta-fibrils is one of the most important factors in the pathogenesis of this neurodegenerative disease. Although the structural analysis of amyloid fibrils is difficult, single-molecule methods may provide unique insights into their characteristics. In the present work, we explored the nanomechanical properties of amyloid fibrils formed from the full-length, most neurotoxic Abeta1-42 peptide, by manipulating individual fibrils with an atomic force microscope. We show that Abeta-subunit sheets can be mechanically unzipped from the fibril surface with constant forces in a reversible transition. The fundamental unzipping force (approximately 23 pN) was significantly lower than that observed earlier for fibrils formed from the Abeta1-40 peptide (approximately 33 pN), suggesting that the presence of the two extra residues (Ile and Ala) at the peptide's C-terminus result in a mechanical destabilization of the fibril. Deviations from the constant force transition may arise as a result of geometrical constraints within the fibril caused by its left-handed helical structure. The nanomechanical fingerprint of the Abeta1-42 is further influenced by the structural dynamics of intrafibrillar interactions.     

Effect of different salt ions on the propensity of aggregation and on the structure of Alzheimer's abeta(1-40) amyloid fibrils

The formation of amyloid fibrils and other polypeptide aggregates depends strongly on the physico-chemical environment. One such factor affecting aggregation is the presence and concentration of salt ions. We have examined the effects of salt ions on the aggregation propensity of Alzheimer's Abeta(1-40) peptide and on the structure of the dissolved and of the fibrillar peptide. All salts examined promote aggregation strongly. The most pronounced effect is seen within the cationic series, i.e. for MgCl2. Evaluation of different possible explanations suggests that Abeta(1-40) aggregation depends on direct interaction between ions and Abeta(1-40) peptide, and correlates with ion-induced changes of the surface tension. Salts have profound effects on the fibril structure. In the presence of salts, fibrils are associated with smaller diameters, narrower crossover distances and lower amide I maxima. Since Abeta(1-40) aggregation responds to salts in a manner unlike that for other polypeptides, such as glucagon, beta2-microglobulin or alpha-synuclein; these data argue that there is no fully uniform way in which salts affect aggregation of different polypeptide chains. These observations are important for understanding and predicting aggregation on the basis of simple physico-chemical properties.     

Hydrogen-deuterium (H/D) exchange mapping of Abeta 1-40 amyloid fibril secondary structure using nuclear magnetic resonance spectroscopy

We describe here details of the hydrogen-deuterium (H/D) exchange behavior of the Alzheimer's peptide Abeta(1)(-)(40), while it is a resident in the amyloid fibril, as determined by high-resolution solution NMR. Kinetics of H/D exchange in Abeta(1)(-)(40) fibrils show that about half the backbone amide protons exchange during the first 25 h, while the other half remain unexchanged because of solvent inaccessibility and/or hydrogen-bonded structure. After such a treatment for 25 h with D(2)O, fibrils of (15)N-enriched Abeta were dissolved in a mixture of 95% dimethyl sulfoxide (DMSO) and 5% dichloroacetic acid (DCA) and successive heteronuclear (1)H-(15)N HSQC spectra were collected to identify the backbone amides that did not exchange in the fibril. These studies showed that the N and C termini of the peptide are accessible to the solvent in the fibril state and the backbone amides of these residues are readily exchanged with bulk deuterium. In contrast, the residues in the middle of the peptide (residues 16-36) are mostly protected, suggesting that that many of the residues in this segment of the peptide are involved in a beta structure in the fibril. Two residues, G25 and S26, exhibit readily exchangeable backbone amide protons and therefore may be located on a turn or a flexible part of the peptide. Overall, the data substantially supports current models for how the Abeta peptide folds when it engages in the amyloid fibril structure, while also addressing some discrepancies between models.     

Abeta40-Lactam(D23/K28) models a conformation highly favorable for nucleation of amyloid

Recent solid-state NMR data (1) demonstrate that Abeta(1)(-)(40) adopts a conformation in amyloid fibrils with two in-register, parallel beta-sheets, connected by a bend structure encompassing residues D(23)VGSNKG(29), with a close contact between the side chains of Asp23 and Lys28. We hypothesized that forming this bend structure might be rate-limiting in fibril formation, as indicated by the lag period typically observed in the kinetics of Abeta(1)(-)(40) fibrillogenesis. We synthesized Abeta(1)(-)(40)-Lactam(D23/K28), a congener Abeta(1)(-)(40) peptide that contains a lactam bridge between the side chains of Asp23 and Lys28. Abeta(1)(-)(40)-Lactam(D23/K28) forms fibrils similar to those formed by Abeta(1)(-)(40). The kinetics of fibrillogenesis, however, occur without the typical lag period, and at a rate approximately 1000-fold greater than is seen with Abeta(1)(-)(40) fibrillogenesis. The strong tendency toward self-association is also shown by size exclusion chromatography in which Abeta(1)(-)(40)-Lactam(D23/K28) forms oligomers even at concentrations of approximately 1-5 microM. Under the same conditions, Abeta(1)(-)(40) shows no detectable oligomers by size exclusion chromatography. Our data suggest that Abeta(1)(-)(40)-Lactam(D23/K28) could bypass an unfavorable folding step in fibrillogenesis, because the lactam linkage "preforms" a bendlike structure in the peptide. Consistent with this view Abeta(1)(-)(40) growth is efficiently nucleated by Abeta(1)(-)(40)-Lactam(D23/K28) fibril seeds.     

Spatial separation of beta-sheet domains of beta-amyloid: disruption of each beta-sheet by N-methyl amino acids

In a recent model of beta-amyloid (Abeta) fibrils, based mainly on solid-state NMR data, a molecular layer consists of two beta-sheets (residues 12-23 and 31-40 of Abeta1-40), folded onto one another by a connecting "bend" structure (residues 25-29) in the side-chain dimension. In this paper, we use two N-methyl amino acids to disrupt each of the two beta-sheets individually (2NMe(NTerm), residues 17 and 19; and 2NMe(CTerm), residues 37 and 39), or both of them at the same time (4NMe, with the above four N-methylated residues). Our data indicate that incorporation of two N-methyl amino acids into one beta-sheet is sufficient to disrupt that sheet while leaving the other, unmodified beta-sheet intact and able to form fibrils. We show, however, that disruption of each of the two beta-sheets has strikingly different effects on fibrillogenesis kinetics and fibril morphology. Both 2NMe(NTerm) and 2NMe(CTerm) form fibrils at similar rates, but more slowly than that of unmodified Abeta1-40. Electron microscopy shows that 2NMe(NTerm) forms straight fibrils with fuzzy amorphous material coating the edges, while 2NMe(CTerm) forms very regular, highly twisted fibrils-in both cases, distinct from the morphology of Abeta1-40 fibrils. Both 2NMe peptides show a "CMC" approximately four times greater than that of Abeta1-40. CD spectra of these peptides also evolve differently in time: whereas the CD spectra of 2NMe(NTerm) evolve little over 10 days, those of 2NMe(CTerm) show a transition to high beta-sheet content at about day 4-5. We also show that disruption of both beta-sheet domains, as in 4NMe, prevents fibril formation altogether, and renders Abeta1-40 highly water soluble and monomeric, and with solvent-exposed side chains. In summary, our data show (1) that the two beta-sheet domains fold in a semiautonomous manner, since disrupting each one still allows the other to fold; (2) that disruption of the N-terminal beta-sheet has a more profound effect on fibrillogenesis than disruption of the C-terminal beta-sheet, suggesting that the former is the more critical for the overall structure of the fibril; and (3) that disruption of both beta-sheet domains renders the peptide monomeric and unable to form fibrils.     

Laminin 1 Attenuates β-Amyloid Peptide Aβ(1-40) Neurotoxicity of Cultured Fetal Rat Cortical Neurons

A growing amount of evidence indicates the involvement of extracellular matrix components, especially laminins, in the development of Alzheimer's disease, although their role remains unclear. In this study, we clearly demonstrate that laminin 1 inhibits beta-amyloid peptide (Abeta)-induced neuronal cell death by preventing the fibril formation and interaction of the Abeta peptide with cell membranes. The presence of laminin at a laminin/Abeta peptide molar ratio of 1:800 significantly inhibits the Abeta-induced apoptotic events, together with inhibition of amyloid fibril formation. The inhibitory effects of laminin 1 were time- and dose-dependent, whereas laminin 2 had less effect on Abeta neurotoxicity. A preincubation of laminin and Abeta was not required to observe the protective effect of laminin, suggesting a direct interaction between laminin 1 and Abeta. Moreover, laminin had no effect on the toxicity of the fibrillar Abeta peptide, suggesting an interaction of laminin with nonfibrillar species of the Abeta peptide, sequestering the peptide in a soluble form. These data extend our understanding of laminin-dependent binding of Abeta and highlight the possible modulation role of laminin regarding Abeta aggregation and neurotoxicity in vivo.