Interaction of the mitotic inhibitor monastrol with human kinesin Eg5

The microtubule-dependent kinesin-like protein Eg5 from Homo sapiens is involved in the assembly of the mitotic spindle. It shows a three-domain structure with an N-terminal motor domain, a central coiled coil, and a C-terminal tail domain. In vivo HsEg5 is reversibly inhibited by monastrol, a small cell-permeable molecule that causes cells to be arrested in mitosis. Both monomeric and dimeric Eg5 constructs have been examined in order to define the minimal monastrol binding domain on HsEg5. NMR relaxation experiments show that monastrol interacts with all of the Eg5 constructs used in this study. Enzymatic techniques indicate that monastrol partially inhibits Eg5 ATPase activity by binding directly to the motor domain. The binding is noncompetitive with respect to microtubules, indicating that monastrol does not interfere with the formation of the motor-MT complex. The binding is not competitive with respect to ATP. Both enzymology and in vivo assays show that the S enantiomer of monastrol is more active than the R enantiomer and racemic monastrol. Stopped-flow fluorometry indicates that monastrol inhibits ADP release by forming an Eg5-ADP-monastrol ternary complex. Monastrol reversibly inhibits the motility of human Eg5. Monastrol has no inhibitory effect on the following members of the kinesin superfamily: MC5 (Drosophila melanogaster Ncd), HK379 (H. sapiens conventional kinesin), DKH392 (D. melanogaster conventional kinesin), BimC1-428 (Aspergillus nidulans BimC), Klp15 (Caenorhabditis elegans C-terminal motor), or Nkin460GST (Neurospora crassa conventional kinesin).     

Conformations of kinesin: solution vs. crystal structures and interactions with microtubules

Recently, the molecular structures of monomeric and dimeric kinesin constructs in complex with ADP have been determined by X-ray crystallography (Kull et al. 1996; Kozielski et al. 1997 a; Sack et al. 1997). The “motor” or “head” domains have almost identical conformations in the known crystal structures, yet the kinesin dimer is asymmetric: the orientation of the two heads relative to the coiled-coil formed by their neck regions is different. We used small angle solution scattering of kinesin constructs and microtubules decorated with kinesin in order to find out whether these crystal structures are of relevance for kinesin's structure under natural conditions and for its interaction with microtubules. Our preliminary results indicate that the crystal structures of monomeric and dimeric kinesin are similar to their structures in solution, though in solution the center-of-mass distance between the motor domains of the dimer could be slightly greater. The crystal structure of dimeric kinesin can be interpreted as representing two equivalent conformations. Transitions between these or very similar conformational states may occur in solution. Binding of kinesin to microtubules has conformational effects on both, the kinesin and the microtubule. Solution scattering of kinesin decorated microtubules reveals a peak in intensity that is characteristic for the B-surface lattice and that can be used to monitor the axial repeat of the microtubules under various conditions. In decoration experiments, dimeric kinesin dissociates, at least partly, leading to a stoichiometry of 1:1 (one kinesin head per tubulin dimer; Thormählen et al. 1998 a) in contrast to the stoichiometry of 2:1 reported for dimeric ncd. This discrepancy is possibly due to the effect of steric hindrance between kinesin dimers on adjacent binding sites.     

Conformation of the Drosophila motor protein non-claret disjunctional in solution from X-ray and neutron scattering

The quaternary structures of monomeric and dimeric Drosophila non-claret disjunctional (ncd) constructs were investigated using synchrotron x-ray and neutron solution scattering, and their low resolution shapes were restored ab initio from the scattering data. The experimental curves were further compared with those computed from crystallographic models of one monomeric and three available dimeric ncd structures in the microtubule-independent ADP-bound state. These comparisons indicate that accounting for the missing parts in the crystal structures for all these constructs is indispensable to obtain reasonable fits to the scattering patterns. A ncd construct (MC6) lacking the coiled-coil region is monomeric in solution, but the calculated scattering from the crystallographic monomer yields a poor fit to the data. A tentative configuration of the missing C-terminal residues in the form of an antiparallel beta-sheet was found that significantly improves the fit. The atomic model of a short dimeric ncd construct (MC5) without 2-fold symmetry is found to fit the data better than the symmetric models. Addition of the C-terminal residues to both head domains gives an excellent fit to the x-ray and neutron experimental data, although the orientation of the beta-sheet differs from that of the monomer. The solution structure of the long ncd construct (MC1) including complete N-terminal coiled-coil and motor domains is modeled by adding a straight coiled-coil section to the model of MC5.     

Structures of kinesin and kinesin-microtubule interactions

Several X-ray crystal structures of kinesin motor domains have recently been solved at high resolution ( approximately 0.2-0.3 nm), in both their monomeric and dimeric states. They show the folding of the polypeptide chain and different arrangements of subunits in the dimer. In addition, cryo-electron microscopy and image reconstruction have revealed microtubules decorated with kinesin at intermediate resolution ( approximately 2 nm), showing the distribution and orientation of kinesin heads on the microtubule surface. The comparison of the X-ray and electron microscopy results yields a model of how monomeric motor domains bind to the microtubule but the binding of dimeric motors, their stoichiometry, or the influence of nucleotides remains a matter of debate.     

A three-domain structure of kinesin heavy chain revealed by DNA sequence and microtubule binding analyses

The structure and function of kinesin heavy chain from D. melanogaster have been studied using DNA sequence analysis and analysis of the properties of truncated kinesin heavy chain synthesized in vitro. Analysis of the sequence suggests the existence of a 50 kd globular amino-terminal domain that contains an ATP binding consensus sequence, followed by another 50-60 kd domain that has sequence characteristics consistent with the ability to fold into an alpha helical coiled coil. The properties of amino- and carboxy-terminally truncated kinesin heavy chains synthesized in vitro reveal that a 60 kd amino-terminal fragment has the nucleotide-dependent microtubule binding activities of the intact kinesin heavy chain, and hence is likely to be a "motor" domain. Finally, the sequence data indicate the presence of a small carboxy-terminal domain. Because it is located at the end of the molecule away from the putative "motor" domain, we propose that this domain is responsible for interactions with other proteins, vesicles, or organelles. These data suggest that kinesin has an organization very similar to that of myosin even though there are no obvious sequence similarities between the two molecules.     

Characterization of the KLP68D kinesin-like protein in Drosophila: possible roles in axonal transport

This paper describes the molecular and biochemical properties of KLP68D, a new kinesin-like motor protein in Drosophila melanogaster. Sequence analysis of a full-length cDNA encoding KLP68D demonstrates that this protein has a domain that shares significant sequence identity with the entire 340-amin acid kinesin heavy chain motor domain. Sequences extending beyond the motor domain predict a region of alpha-helical coiled-coil followed by a globular "tail" region; there is significant sequence similarity between the alpha-helical coiled- coil region of the KLP68D protein and similar regions of the KIF3 protein of mouse and the KRP85 protein of sea urchin. This finding suggests that all three proteins may be members of the same family, and that they all perform related functions. KLP68D protein produced in Escherichia coli is, like kinesin itself, a plus-end directed microtubule motor. In situ hybridization analysis of KLP68D RNA in Drosophila embryos indicates that the KLP68D gene is expressed primarily in the central nervous system and in a subset of the peripheral nervous system during embryogenesis. Thus, KLP68D may be used for anterograde axonal transport and could conceivably move cargoes in fly neurons different than those moved by kinesin heavy chain or other plus-end directed motors.     

Evidence that the stalk of Drosophila kinesin heavy chain is an alpha- helical coiled coil

Kinesin is a mechanochemical enzyme composed of three distinct domains: a globular head domain, a rodlike stalk domain, and a small globular tail domain. The stalk domain has sequence features characteristic of alpha-helical coiled coils. To gain insight into the structure of the kinesin stalk, we expressed it from a segment of the Drosophila melanogaster kinesin heavy chain gene and purified it from Escherichia coli. When observed by EM, this protein formed a rodlike structure 40-55 nm long that was occasionally bent at a hingelike region near the middle of the molecule. An additional EM study and a chemical cross-linking study showed that this protein forms a parallel dimer and that the two chains are in register. Finally, using circular dichroism spectroscopy, we showed that this protein is approximately 55-60% alpha-helical in physiological aqueous solution at 25 degrees C, and approximately 85-90% alpha-helical at 4 degrees C. From these results, we conclude that the stalk of kinesin heavy chain forms an alpha-helical coiled coil structure. The temperature dependence of the circular dichroism signal has two major transitions, at 25-30 degrees C and at 45-50 degrees C, which suggests that a portion of the alpha-helical structure in the stalk is less stable than the rest. By producing the amino-terminal (coil 1) and carboxy-terminal (coil 2) halves of the stalk separately in E. coli, we showed that the region that melts below 30 degrees C lies within coil 1, while the majority of coil 2 melts above 45 degrees C. We suggest that this difference in stability may play a role in the force-generating mechanism or regulation of kinesin.     

Motor domain mutation traps kinesin as a microtubule rigor complex

Conventional kinesin is a highly processive, microtubule-based motor protein that drives the movement of membranous organelles in neurons. Using in vivo genetics in Drosophila melanogaster, Glu164 was identified as an amino acid critical for kinesin function [Brendza, K. M., Rose, D. J., Gilbert, S. P., and Saxton, W. M. (1999) J. Biol. Chem. 274, 31506-31514]. Glu164 is located at the beta-strand 5a/loop 8b junction of the catalytic core and projects toward the microtubule binding face in close proximity to key residues on beta-tubulin helix alpha12. Substitution of Glu(164) with alanine (E164A) results in a dimeric kinesin with a dramatic reduction in the microtubule-activated steady-state ATPase (5 s(-1) per site versus 22 s(-1) per site for wild-type). Our analysis shows that E164A binds ATP and microtubules with a higher affinity than wild-type kinesin. The rapid quench and stopped-flow results provide evidence that ATP hydrolysis is significantly faster and the precise coordination between the motor domains is disrupted. The data reveal an E164A intermediate that is stalled on the microtubule and cannot bind and hydrolyze ATP at the second head.     

Microtubule-kinesin interface mutants reveal a site critical for communication

Strict coordination of the two motor domains of kinesin is required for driving the processive movement of organelles along microtubules. Glutamate 164 of the kinesin heavy chain was shown to be critical for kinesin function through in vivo genetics in Drosophila melanogaster. The mutant motor E164K exhibited reduced steady-state ATPase activity and higher affinity for both ATP and microtubules. Moreover, an alanine substitution at this position (E164A) caused similar defects. It became stalled on the microtubule and was unable to bind and hydrolyze ATP at the second motor domain. Glu(164), which has been conserved through evolution, is located at the motor-microtubule interface close to key residues on helix alpha12 of beta-tubulin. We explored further the contributions of Glu(164) to motor function using several site-directed mutant proteins: E164K, E164N, E164D, E164Q, and D165A. The results indicate that the microtubule-E164K complex can only bind and hydrolyze one ATP. ATP with increased salt was able to dissociate a population of E164K motors from the microtubule but could not dissociate E164A. We tested the basis of the stabilized microtubule interaction with E164K, E164N, and E164A. The results provide new insights about the motor-microtubule interface and the pathway of communication for processive motility.     

Solution structures of dimeric kinesin and ncd motors

The dimeric structure of the members of the kinesin family of motor proteins determines the individual characteristics of their microtubule-based motility. Crystal structures for ncd and kinesin dimers, which move in opposite directions on microtubules, show possible states of these dimers with ADP bound but give no information about these dimers in solution. Here, low-angle X-ray and neutron scattering were used to investigate their solution structures. Scattering profiles of Drosophila ncd 281-700 (NCD281) and human kinesin 1-420 (hKIN420) were compared with models made from the crystallographically determined structures of NCD281 and rat kinesin 1-379 (rKIN379). From the low-angle region it was found that the radius of gyration (Rg) of NCD281 is 3.60 +/- 0.075 nm, which is in agreement with the crystallography-based model. Scattering by longer ncd constructs (NCD250 and NCD224) is also well fit by the appropriate crystallography-based models. However, the measured Rg of hKIN420, 4.05 +/- 0.075 nm, is significantly smaller than that of the crystallography-based model. In addition, the overall scattering pattern of NCD281 is well fit by the model, but that of hKIN420 is poorly fit. Model calculations indicate that the orientation of the catalytic cores is different from that observed in the rKIN379 crystal structure. Like the crystal structure, the best-fitting models do not show 2-fold symmetry about the neck axis; however, their overall shape more resembles a mushroom than the "T"-like orientation of the catalytic cores found in the crystal structure. The center of mass separations of the catalytic cores in the best-fitting models are 0.7-1 nm smaller than in the crystal structure.     

The shapes of the motor domains of two oppositely directed microtubule motors, ncd and kinesin: a neutron scattering study.

The shapes of the motor domains of kinesin and ncd, which move in opposite directions along microtubules, have been investigated. Using proteins expressed in Escherichia coli, it was found that at high salt (> 200 mM) Drosophila ncd motor domain (R335-K700) and human kinesin motor domain (M1-E349) were both sufficiently monomeric to allow an accurate determination of their radii of gyration (Rg) and their molecular weights. The measured Rg values of the ncd and kinesin motor domains in D2O were 2.06 +/- 0.06 and 2.05 +/- 0.04 nm, respectively, and the molecular weights were consistent with those computed from the amino acid compositions. Fitting of the scattering curves to approximately 3.5 nm resolution showed that the ncd and kinesin motor domains can be described adequately by triaxial ellipsoids having half-axes of 1.42 +/- 0.38, 2.24 +/- 0.44, and 3.65 +/- 0.22 nm, and half-axes of 1.52 +/- 0.23, 2.00 +/- 0.25, and 3.73 +/- 0.10 nm, respectively. Both motor domains are described adequately as somewhat flattened prolate ellipsoids with a maximum dimension of approximately 7.5 nm. Thus, it appears that the overall shapes of these motor domains are not the major determinants of the directionality of their movement along microtubules.     

The primary structure and analysis of the squid kinesin heavy chain

We report the cDNA sequence of the squid kinesin heavy chain and compared the predicted amino acid sequence with that of the Drosophila heavy chain as reported by Yang, J.T., Laymon, R.A., and Goldstein, L.S. B. (1989) Cell 56, 879-889). We compared the two kinesin sequences with regard to the predicted physicochemical parameters of hydrophobicity, charge, and propensities of the secondary conformations. A comparison of the sequences from the two species reveals the head, stalk, and tail domains because a reduced degree of conservation demarcates the stalk. The charge profile indicates that the head region is nearly neutral, the stalk region acidic, and the tail is basic. The Fourier transform analysis of the hydrophobic profile of the stalk shows predominant peaks at 1/3.5 and 1/2.3, which are indexed as the second and third orders of the period 7 residue. As in the Drosophila sequence, the rod domain is divided into an amino and a carboxyl subdomain by a predicted hinge region. We show that the disposition of hydrophobic residues is distinct in these two subdomains. In particular, the heptad repeat is more regular in the amino-terminal rod domain than in the carboxyl-terminal rod domain. The tail region is positively charged, a feature that is consistent with the known electrostatic interaction between the heavy chain and negatively charged surfaces such as glass coverslips and latex beads. Three monoclonal antibodies to the kinesin heavy chain have been mapped to a region within the carboxyl terminus of the stalk.     

The kinesin-associated protein UNC-76 is required for axonal transport in the Drosophila nervous system

Kinesin-I is essential for the transport of membrane-bound organelles in neural and nonneural cells. However, the means by which kinesin interacts with its intracellular cargoes, and the means by which kinesin-cargo interactions are regulated in response to cellular transport requirements are not fully understood. The C terminus of the Drosophila kinesin heavy chain (KHC) was used in a two-hybrid screen of a Drosophila cDNA library to identify proteins that bind specifically to the kinesin tail domain. UNC-76 is an evolutionarily conserved cytosolic protein that binds to the tail domain of KHC in two-hybrid and copurification assays, indicating that kinesin and UNC-76 form a stable complex in vivo. Loss of Drosophila Unc-76 function results in locomotion and axonal transport defects reminiscent of the phenotypes observed in kinesin mutants, suggesting that UNC-76 is required for kinesin-dependent axonal transport. Unc-76 exhibits dosage-sensitive genetic relationships with Khc and Kinesin light chain mutations, further supporting the hypothesis that UNC-76 and kinesin-I work in a common transport pathway. Given the interaction of FEZ1, the mammalian homolog of UNC-76, with protein kinase Czeta, and the role of FEZ1 in axon outgrowth, we propose that UNC-76 helps integrate kinesin activity in response to transport requirements in axons.     

The Drosophila kinesin-I associated protein YETI binds both kinesin subunits

The microtubule-based motor kinesin-I is essential for the intracellular transport of membrane-bound organelles in the Drosophila nervous system and female germ line. A number of studies have demonstrated that kinesin-I binds to its intracellular cargos through protein-protein interactions between the kinesin tail domain and proteins on the cargo surface. To identify proteins that mediate or regulate kinesin-cargo interactions, we have performed yeast two-hybrid screens of a Drosophila embryonic cDNA library, using the tetratricopeptide repeats of the kinesin light chain and amino acids 675-975 of the kinesin heavy chain as baits. One of the proteins we have identified is YETI. Interestingly, YETI has the unique ability to bind specifically to both subunits of the kinesin tail domain. An epitope-tagged YETI fusion protein, when expressed in Drosophila S2 cultured cells, binds to kinesin-I in copurification assays, suggesting that YETI-kinesin-I interactions are context-independent. Immunostaining of cultured cells expressing YETI shows that YETI accumulates in the nucleus and cytosol. YETI is evolutionarily conserved, and its yeast homolog (AOR1) may have a role in regulating cytoskeletal dynamics or intracellular transport. Collectively, these results demonstrate that YETI interacts with both kinesin subunits of the kinesin tail domain, and is potentially involved in kinesin-dependent transport pathways.     

The Fab and Fc fragments of IgA1 exhibit a different arrangement from that in IgG: a study by X-ray and neutron solution scattering and homology modelling

Human immunoglobulin A (IgA) is an abundant antibody that mediates immune protection at mucosal surfaces as well as in plasma. The IgA1 isotype contains two four-domain Fab fragments and a four-domain Fc fragment analogous to that in immunoglobulin G (IgG), linked by a glycosylated hinge region made up of 23 amino acid residues from each of the heavy chains. IgA1 also has two 18 residue tailpieces at the C terminus of each heavy chain in the Fc fragment. X-ray scattering using H2O buffers and neutron scattering using 100 % 2H2O buffers were performed on monomeric IgA1 and a recombinant IgA1 that lacks the tailpiece (PTerm455). The radii of gyration RG from Guinier analyses were similar at 6.11-6.20 nm for IgA1 and 5.84-6.16 nm for PTerm455, and their cross-sectional radii of gyration RXS were also similar. The similarity of the RG and RXS values suggests that the tailpiece of IgA1 is not extended outwards in solution. The IgA1 RG values are higher than those for IgG, and the distance distribution function P(r) showed two distinct peaks, whereas a single peak was observed for IgG. Both results show that the hinge of IgA1 results in an extended Fab and Fc arrangement that is different from that in IgG. Automated curve-fit searches constrained by homology models for the Fab and Fc fragments were used to model the experimental IgA1 scattering curves. A translational search to optimise the relative arrangement of the Fab and Fc fragments held in a fixed orientation resembling that in IgG was not successful in fitting the scattering data. A new molecular dynamics curve-fit search method generated IgA1 hinge structures to which the Fab and Fc fragments could be connected in any orientation. A search based on these identified a limited family of IgA1 structures that gave good curve fits to the experimental data. These contained extended hinges of length about 7 nm that positioned the Fab-to-Fab centre-to-centre separation 17 nm apart while keeping the corresponding Fab-to-Fc separation at 9 nm. The resulting extended T-shaped IgA1 structures are distinct from IgG structures previously determined by scattering and crystallography which have Fab-to-Fab and Fab-to-Fc centre-to-centre separations of 7-9 nm and 6-8 nm, respectively. It was concluded that the IgA1 hinge is structurally distinct from that in IgG, and this results in a markedly different antibody structure that may account for a unique immune role of monomeric IgA1 in plasma and mucosa.     

The heavy chain of conventional kinesin interacts with the SNARE proteins SNAP25 and SNAP23

Recent studies on the conventional motor protein kinesin have identified a putative cargo-binding domain (residues 827-906) within the heavy chain. To identify possible cargo proteins which bind to this kinesin domain, we employed a yeast two-hybrid assay. A human brain cDNA library was screened, using as bait residues 814-963 of human ubiquitous kinesin heavy chain. This screen initially identified synaptosome-associated protein of 25 kDa (SNAP25) as a kinesin-binding protein. Subsequently, synaptosome-associated protein of 23 kDa (SNAP23), the nonneuronal homologue of SNAP25, was also confirmed to interact with kinesin. The sites of interaction, determined from in vivo and in vitro assays, are the N-terminus of SNAP25 (residues 1-84) and the cargo-binding domain of kinesin heavy chain (residues 814-907). Both regions are composed almost entirely of heptad repeats, suggesting the interaction between heavy chain and SNAP25 is that of a coiled-coil. The observation that SNAP23 also binds to residues 814-907 of heavy chain would indicate that the minimal kinesin-binding domain of SNAP23 and SNAP25 is most likely residues 45-84 (SNAP25 numbering), a heptad-repeat region in both proteins. The major binding site for kinesin light chain in kinesin heavy chain was mapped to residues 789-813 at the C-terminal end of the heavy chain stalk domain. Weak binding of light chain was also detected at the N-terminus of the heavy chain tail domain (residues 814-854). In support of separate binding sites on heavy chain for light chain and SNAPs, a complex of heavy and light chains was observed to interact with SNAP25 and SNAP23.     

Cloning and sequence analysis of cDNAs encoding the heavy and light chain variable regions of an Ab2beta anti-idiotypic monoclonal antibody possessing an internal image of cocaine.

We report here the cloning and sequence analysis of cDNAs encoding the variable regions of an Ab2beta anti-idiotypic monoclonal antibody (K1-4c, gamma1kappa) that mimics the configuration of cocaine. The Ab2beta specifically binds to the human dopamine transporter as shown by confocal immunofluorescence microscopy. The sequence of the heavy chain complementarity-determining region 3 of K1-4c is strikingly similar to that of a monoclonal antibody (F11.2.32) specific for HIV-1 protease. Three or four amino acids in the epitope recognized by the anti-HIV-1 protease antibody are also present in the third extracellular loop of the dopamine transporter. This epitope is within the conserved region of the known transporters for dopamine, norepinephrine and serotonin in Homo sapiens, Rattus norvegicus, Caenorhabditis elegans and Drosophila melanogaster.     

A new look at the microtubule binding patterns of dimeric kinesins

The interactions of monomeric and dimeric kinesin and ncd constructs with microtubules have been investigated using cryo-electron microscopy (cryo-EM) and several biochemical methods. There is a good consensus on the structure of dimeric ncd when bound to a tubulin dimer showing one head attached directly to tubulin, and the second head tethered to the first. However, the 3D maps of dimeric kinesin motor domains are still quite controversial and leave room for different interpretations. Here we reinvestigated the microtubule binding patterns of dimeric kinesins by cryo-EM and digital 3D reconstruction under different nucleotide conditions and different motor:tubulin ratios, and determined the molecular mass of motor-tubulin complexes by STEM. Both methods revealed complementary results. We found that the ratio of bound kinesin motor-heads to alphabeta-tubulin dimers was never reaching above 1.5 irrespective of the initial mixing ratios. It appears that each kinesin dimer occupies two microtubule-binding sites, provided that there is a free one nearby. Thus the appearances of different image reconstructions can be explained by non-specific excess binding of motor heads. Consequently, the use of different apparent density distributions for docking the X-ray structures onto the microtubule surface leads to different and mutually exclusive models. We propose that in conditions of stoichiometric binding the two heads of a kinesin dimer separate and bind to different tubulin subunits. This is in contrast to ncd where the two heads remain tightly attached on the microtubule surface. Using dimeric kinesin molecules crosslinked in their neck domain we also found that they stabilize protofilaments axially, but not laterally, which is a strong indication that the two heads of the dimers bind along one protofilament, rather than laterally bridging two protofilaments. A molecular walking model based on these results summarizes our conclusions and illustrates the implications of symmetry for such models.     

Light chains of sea urchin kinesin identified by immunoadsorption

Previous studies with monoclonal antibodies indicate that sea urchin kinesin contains two heavy chains arranged in parallel such that their N-terminal ends fold into globular mechanochemical heads attached to a thin stalk ending in a bipartite tail [Scholey et al., 1989]. In the present, complementary study, we have used the monoclonal antikinesin, SUK4, to probe the quaternary structure of sea urchin (Strongylocentrotus purpuratus) kinesin. Kinesin prepared from sea urchin cytosol sedimented at 9.6 S on sucrose density gradients and consisted of 130-kd heavy chains plus an 84-kd/78 kd doublet (1 mol heavy chain: 1 mol doublet determined by gel densitometry). Low levels of 110-kd and 90-kd polypeptides were sometimes present as well. The 84-kd/78 kd polypeptides are thought to be light chains because they were precipitated from the kinesin preparation at a stoichiometry of one mol doublet per 1 mol heavy chain using SUK4-Sepharose immunoaffinity resins. The 110-kd and 90-kd peptides, by contrast, were removed using this immunoadsorption method. SUK4-Sepharose immunoaffinity chromatography was also used to purify the 130-kd heavy chain and 84-kd/78-kd doublet (1 mol heavy chain: 1 mol doublet) directly from sea urchin egg cytosolic extracts, and from a MAP (microtubule-associated protein) fraction eluted by ATP from microtubules prepared in the presence of AMPPNP but not from microtubules prepared in ATP. The finding that sea urchin kinesin contains equimolar quantities of heavy and light chains, together with the aforementioned data on kinesin morphology, suggests that native sea urchin kinesin is a tetramer assembled from two light chains and two heavy chains.