Nature of the regions involved in the insertion of newly synthesized protein into the outer membrane of Escherichia coli

Outer membrane proteins are synthesized by cytoplasmic membrane-bound polysomes, and inserted at insertion sites which cover about 10% of the total outer membrane when cells grow with a generation time of 1 h. A membrane fraction enriched in outer membrane insertion regions was isolated and partly characterized. The rate at which newly inserted proteins are transferred from such insertion regions into the rest of the outer membrane was found to be very fast; the new protein content of insertion regions and that of the remaining outer membrane equilibrate completely within about 20 s at 25°C.Given the rather rigid structure of the outer membrane and the multiple interactions between outer membane components and the murein layer, lateral diffusion of newly inserted proteins from insertion sites to the remaining outer membrane is not likely to explain this rapid equilibration. Instead, the data support a model in which mobile insertion regions move along the cell surface, leaving behind stationary, newly inserted outer membrane proteins.     

Preferential release of new outer membrane fragments by exponentially growing Escherichia coli

We have examined whether the outer membrane fragments released by normally growing Escherichia coli contain relatively old or new outer membrane.Double-label experiments show that after incorporation of radioactive leucine into E. coli protein, there is a preferential release of outer membrane material which contains a high percentage of newly labeled protein. This implies that outer membrane fragments are preferentially released from those regions where newly synthesized proteins are inserted into the outer membrane. We estimate that these insertion regions cover no more than 13% of the total outer membrane, and that newly inserted proteins diffuse in the plane of the outer membrane with a diffusion constant ? 5 · 10^?13 cm²/s.     

Creation of targets for proteolytic cleavage in the LamB protein of E coli K12 by genetic insertion of foreign sequences: implications for topological studies

LamB, an integral outer membrane protein of E coli K12, is highly resistant to protease digestion. We had previously genetically inserted a foreign sequence corresponding to an epitope from the poliovirus next to amino acids 146, 153, 189, and 374 of LamB. In 3 cases (sites 146, 153, 374), insertion of the foreign peptide did not extensively affect the functions of LamB (and therefore folding). In 2 cases (sites 146 and 374) the polio virus epitope was detectable on the bacterial surface with a specific monoclonal antibody. We show here that the 4 modified proteins are sensitive to trypsin, including on intact cells. The sizes of the major cleavage products is that expected for proteolysis at or near the sequences inserted. In 1 case (site 153), this was directly demonstrated by protein sequencing. The results confirm the cell surface exposure of the regions of residues 153 and 374 and provide information on the regions around residues 146 and 189. Perspectives and limitations of this approach for fine studies on the mode of insertion of membrane proteins are briefly discussed.     

Insertion of newly synthesized proteins into the outer membrane of Escherichia coli

The insertion of newly synthesized proteins into the outer membrane of Escherichia coli has been examined. The results show that there is no precursor pool of outer membrane proteins in the cytoplasmic membrane because first, the incorporation of a [³⁵S]methionine pulse into outer membrane proteins completely parallels its incorporation into cytoplasmic membrane proteins, and second, under optimal isolation conditions, no outer membrane proteins are found in the cytoplasmic membrane, even when the membranes are analysed after being labeled for only 15 s.The [³⁵S]methionine present in the outer membrane after a pulse of 15 s was found in protein fragments of varying sizes rather than in specific outer membrane proteins. This label could however be chased into specific proteins within 30–120 s, depending on the size of the protein, indicating that although unfinished protein fragments were present in the outer membrane, they were completed by subsequent chain elongation.Thus, outer membrane proteins are inserted into the outer membrane while still attached to ribosomes. Since ribosomes which are linked to the cell envelope by nascent polypeptide chains are stationary, the mRNA which is being translated by these ribosomes moves along the inner cell surface.     

Without a little help from 'my' friends: direct insertion of proteins into chloroplast membranes?

The chloroplast membranes are highly regulated and biological active regions of the living plant cell, which carry numerous essential proteinaceous components. For example, in the thylakoid membrane the photosynthesis apparatus, one of the most life-relevant biological machineries, is located. How these membrane proteins are targeted to and inserted into their target membranes was one of the questions we aimed to understand in the last few years. Fifteen years ago little to nothing was known about the targeting and translocation of outer envelope proteins (G.W. Schmidt and L.M. Mishkind, Annu. Rev. Biochem. 55 (1986)). Although several protein assisted pathways for translocation of proteins across the membranes have been characterised, only recent results gave insight into how membrane proteins are inserted into the chloroplast membranes. Here we will focus on the mode of insertion of a class of proteins into the outer envelope and the thylakoid membranes, which share a unique feature: they insert apparently directly into the lipid bilayer, i.e. without the help of a proteinaceous translocation pore.     

Import pathways of precursor proteins into mitochondria: multiple receptor sites are followed by a common membrane insertion site

The precursor of porin, a mitochondrial outer membrane protein, competes for the import of precursors destined for the three other mitochondrial compartments, including the Fe/S protein of the bc1- complex (intermembrane space), the ADP/ATP carrier (inner membrane), subunit 9 of the F0-ATPase (inner membrane), and subunit beta of the F1- ATPase (matrix). Competition occurs at the level of a common site at which precursors are inserted into the outer membrane. Protease- sensitive binding sites, which act before the common insertion site, appear to be responsible for the specificity and selectivity of mitochondrial protein uptake. We suggest that distinct receptor proteins on the mitochondrial surface specifically recognize precursor proteins and transfer them to a general insertion protein component (GIP) in the outer membrane. Beyond GIP, the import pathways diverge, either to the outer membrane or to translocation contact-sites, and then subsequently to the other mitochondrial compartments.     

Epitope tagging analysis of the outer membrane folding of the molecular usher FaeD involved in K88 fimbriae biosynthesis in Escherichia coli

To analyse the outer membrane folding of the molecular usher FaeD, tagged derivatives were prepared and their expression, tag-localisation and functioning in K88 fimbriae biosynthesis was studied. A semi-random insertion mutagenesis approach with factor Xa cleavage sites yielded six tagged FaeD derivatives. A site-directed mutagenesis approach in which c-myc epitopes were inserted yielded twenty-one different derivatives. Four tagged FaeD constructs were not expressed in the outer membrane as full-sized proteins to levels that could be detected by using immunoblotting analyses. Two of these had an insertion in the amino-terminal part of FaeD, whereas the other two had a tag inserted in the carboxyl-terminal part. The latter ones yielded stable carboxyl-terminally shortened truncates of about 70 kDa, as did other mutations in this region. Six tagged derivatives were expressed but the location of the tag with respect to the outer membrane could not be determined, possibly due to shielding. Functional analysis showed that insertion of a tag in two regions of FaeD, a central region of approximately 200 amino acid residues (a.a. 200-400) and the carboxyl-terminal region (a.a. 600-end), resulted in a defective K88 fimbriae biosynthesis. In-frame deletions in the amino-terminal region of FaeD abolished fimbriae production. The integrity of these regions is obviously essential for fimbriae biosynthesis. Based on the results and with the aid of a computer analysis programme for the prediction of outer membrane beta-strands, a folding model with 22 membrane spanning beta-strands and two periplasmioc domains has been developed.     

Signal-anchored proteins follow a unique insertion pathway into the outer membrane of mitochondria

Signal-anchored proteins are a class of mitochondrial outer membrane proteins that expose a hydrophilic domain to the cytosol and are anchored to the membrane by a single transmembrane domain in the N-terminal region. Like the vast majority of mitochondrial proteins, signal-anchored proteins are synthesized on cytosolic ribosomes and are subsequently imported into the organelle. We have studied the mechanisms by which precursors of these proteins are recognized by the mitochondria and are inserted into the outer membrane. The import of signal-anchored proteins was found to be independent of the known import receptors, Tom20 and Tom70, but to require the major Tom component, Tom40. In contrast to precursors destined to internal compartments of mitochondria and those of outer membrane beta-barrel proteins, precursors of signal-anchored proteins appear not to be inserted via the general import pore. Taken together, we propose a novel pathway for insertion of these proteins into the outer membrane of mitochondria.     

Import pathways of chloroplast interior proteins and the outer-membrane protein OEP14 converge at Toc75

Most chloroplast outer-membrane proteins are synthesized at their mature size without cleavable targeting signals. Their insertion into the outer membrane is insensitive to thermolysin pretreatment of chloroplasts and does not require ATP. It has therefore been assumed that insertion of outer-membrane proteins proceeds through a different pathway from import into the interior of chloroplasts, which requires a thermolysin-sensitive translocon complex and ATP. Here, we show that a model outer-membrane protein, OEP14, competed with the import of a chloroplast interior protein, indicating that the two import pathways partially overlapped. Cross-linking studies showed that, during insertion, OEP14 was associated with Toc75, a thermolysin-resistant component of the outer-membrane protein-conducting channel that mediates the import of interior-targeted precursor proteins. Whereas almost no OEP14 inserted into protein-free liposomes, OEP14 inserted into proteoliposomes containing reconstituted Toc75 with a high efficiency. Taken together, our data indicate that Toc75 mediates OEP14 insertion, and therefore plays a dual role in the targeting of proteins to the outer envelope membrane and interior of chloroplasts.     

Topology of the outer membrane usher PapC determined by site-directed fluorescence labeling

In contrast to typical membrane proteins that span the lipid bilayer via transmembrane alpha-helices, bacterial outer membrane proteins adopt a beta-barrel architecture composed of antiparallel transmembrane beta-strands. The topology of outer membrane proteins is difficult to predict accurately using computer algorithms, and topology mapping protocols commonly used for alpha-helical membrane proteins do not work for beta-barrel proteins. We present here the topology of the PapC usher, an outer membrane protein required for assembly and secretion of P pili by the chaperone/usher pathway in uropathogenic Escherichia coli. An initial attempt to map PapC topology by insertion of protease cleavage sites was largely unsuccessful due to lack of cleavage at most sites and the requirement to disrupt the outer membrane to identify periplasmic sites. We therefore adapted a site-directed fluorescence labeling technique to permit topology mapping of outer membrane proteins using small molecule probes in intact bacteria. Using this method, we demonstrated that PapC has the potential to encode up to 32 transmembrane beta-strands. Based on experimental evidence, we propose that the usher consists of an N-terminal beta-barrel domain comprised of 26 beta-strands and that a distinct C-terminal domain is not inserted into the membrane but is located instead within the lumen of the N-terminal beta-barrel similar to the plug domains encoded by the outer membrane iron-siderophore uptake proteins.     

Insertion of OEP14 into the outer envelope membrane is mediated by proteinaceous components of chloroplasts

Most chloroplastic outer envelope membrane proteins are synthesized in the cytosol at their mature size without a cleavable targeting signal. Their insertion into the outer membrane is insensitive to thermolysin pretreatment of chloroplasts and does not require ATP. The insertion has been assumed to be mediated by a spontaneous mechanism or by interaction solely with the lipid components of the outer membrane. However, we show here that insertion of an outer membrane protein requires some trypsin-sensitive and some N-ethylmaleimide-sensitive components of chloroplasts. Association and insertion of the outer membrane protein are saturable and compete with the import of another outer membrane protein. These data suggest that import of chloroplastic outer membrane proteins occurs at specific proteinaceous sites on chloroplasts.     

Outer membrane of gram-negative bacteria. XVIII. Electron microscopic studies on porin insertion sites and growth of cell surface of Salmonella typhimurium.

Salmonella typhimurium contains three "major proteins" or "porins" (34K, 35K, and 36K) in the outer membrane. A mutant strain producing only the 35K porin was first grown in media containing high concentrations of NaCl to "repress" the porin synthesis and then was shifted into a medium without NaCl. The newly made porin molecules were then labeled with the ferritin-coupled antibody at various times after the shift, and the samples were examined by whole-mount, freeze-etching, and thin-section electron microscopy. These experiments showed that newly inserted porins appeared as discrete patches uniformly distributed over the surface of the cell and, furthermore, that the sites of adhesion between the inner and outer membrane were most probably the pathway by which the newly made porin molecules appeared on cell surface. The 34K and 36K porins were also inserted in the same manner, since the appearance of new porins at discrete sites all over the cell surface was also observed when cells with wild-type porin phenotype were treated with unlabeled antibody to block existing antigenic sites, subsequently regrown, and labeled with the ferritin-coupled antibody. Since porins comprise a major portion of the densely packed, relatively immobile, "protein framework" of the outer membrane, these results lead us to conclude that the outer membrane grows predominantly by diffuse intercalation rather than by the zonal growth mechanism.     

Permissive linker insertion sites in the outer membrane protein of 987P fimbriae of Escherichia coli.

The FasD protein is essential for the biogenesis of 987P fimbriae of Escherichia coli. In this study, subcellular fractionation was used to demonstrate that FasD is an outer membrane protein. In addition, the accessibility of FasD to proteases established the presence of surface-exposed FasD domains on both sides of the outer membrane. The fasD gene was sequenced, and the deduced amino acid sequence was shown to share homologous domains with a family of outer membrane proteins from various fimbrial systems. Similar to porins, fimbrial outer membrane proteins are relatively polar, lack typical hydrophobic membrane-spanning domains, and posses secondary structures predicted to be rich in turns and amphipathic beta-sheets. On the basis of the experimental data and structural predictions, FasD is postulated to consist essentially of surface-exposed turns and loops and membrane-spanning interacting amphipathic beta-strands. In an attempt to test this prediction, the fasD gene was submitted to random in-frame linker insertion mutagenesis. Preliminary experiments demonstrated that it was possible to produce fasD mutants, whose products remain functional for fimbrial export and assembly. Subsequently, 11 fasD alleles, containing linker inserts encoding beta-turn-inducing residues, were shown to express functional proteins. The insertion sites were designated permissive sites. The inserts used are expected to be least detrimental to the function of FasD when they are inserted into surface-exposed domains not directly involved in fimbrial export. In contrast, FasD is not expected to accommodate such residues in its amphipathic beta-strands without being destabilized in the membrane and losing function. All permissive sites were sequenced and shown to be located in or one residue away from predicted turns. In contrast, 5 of 10 sequenced nonpermissive sites were mapped to predicted amphipathic beta-strands. These results are consistent with the structural predictions for FasD.     

Insertion mutagenesis and membrane topology model of the Pseudomonas aeruginosa outer membrane protein OprM

Pseudomonas aeruginosa OprM is a protein involved in multiple-antibiotic resistance as the outer membrane component for the MexA-MexB-OprM efflux system. Planar lipid bilayer experiments showed that OprM had channel-forming activity with an average single-channel conductance of only about 80 pS in 1 M KCl. The gene encoding OprM was subjected to insertion mutagenesis by cloning of a foreign epitope from the circumsporozoite form of the malarial parasite Plasmodium falciparum into 11 sites. In Escherichia coli, 8 of the 11 insertion mutant genes expressed proteins at levels comparable to those obtained with the wild-type gene and the inserted malarial epitopes were surface accessible as assessed by indirect immunofluorescence. When moved to a P. aeruginosa OprM-deficient strain, seven of the insertion mutant genes expressed proteins at variable levels comparable to that of wild-type OprM and three of these reconstituted MIC profiles resembling those of the wild-type protein, while the other mutant forms showed variable MIC results. Utilizing the data from these experiments, in conjunction with multiple sequence alignments and structure predictions, an OprM topology model with 16 beta strands was proposed.     

Transmembrane topology of the protein palmitoyl transferase Akr1

The two recently identified protein acyl transferases (PATs), Akr1p and Erf2p/Erf4p, point toward the DHHC protein family as a likely PAT family. The DHHC protein family, defined by the novel, zinc finger-like DHHC cysteine-rich domain (DHHC-CRD), is a diverse collection of polytopic membrane proteins extending through all eukaryotes. To define the PAT domains that are oriented to the cytoplasm and are thus available to effect the cytoplasmically limited palmitoyl modification, we have determined the transmembrane topology of the yeast PAT Akr1p. Portions of the yeast protein invertase (Suc2p) were inserted in-frame at 10 different hydrophilic sites within the Akr1 polypeptide. Three of the Akr1-Suc2-Akr1 insertion proteins were found to be extensively glycosylated, indicating that the invertase segment inserted at these Akr1p sites is luminally oriented. The remaining seven insertion proteins were not glycosylated, consistent with a cytoplasmic orientation for these sites. The results support a model in which the Akr1 polypeptide crosses the bilayer six times with the bulk of its hydrophilic domains disposed toward the cytoplasm. Cytoplasmic domains include both the relatively large, ankyrin repeat-containing N-terminal domain and the DHHC-CRD, which maps to a cytosolic loop segment. Functionality of the different Akr1-Suc2-Akr1 proteins also was examined. Insertions at only 4 of the 10 sites were found to disrupt Akr1p function. Interestingly, these four sites all map cytoplasmically, suggesting key roles for these cytoplasmic domains in Akr1 PAT function. Finally, extrapolating from the Akr1p topology, topology models are proposed for other DHHC protein family members.     

Surface-tethered planar membranes containing the β-barrel assembly machinery: a platform for investigating bacterial outer membrane protein folding

The outer membrane of Gram-negative bacteria presents a robust physicochemical barrier protecting the cell from both the natural environment and acting as the first line of defense against antimicrobial materials. The proteins situated within the outer membrane are responsible for a range of biological functions including controlling influx and efflux. These outer membrane proteins (OMPs) are ultimately inserted and folded within the membrane by the β-barrel assembly machine (Bam) complex. The precise mechanism by which the Bam complex folds and inserts OMPs remains unclear. Here, we have developed a platform for investigating Bam-mediated OMP insertion. By derivatizing a gold surface with a copper-chelating self-assembled monolayer, we were able to assemble a planar system containing the complete Bam complex reconstituted within a phospholipid bilayer. Structural characterization of this interfacial protein-tethered bilayer by polarized neutron reflectometry revealed distinct regions consistent with known high-resolution models of the Bam complex. Additionally, by monitoring changes of mass associated with OMP insertion by quartz crystal microbalance with dissipation monitoring, we were able to demonstrate the functionality of this system by inserting two diverse OMPs within the membrane, pertactin, and OmpT. This platform has promising application in investigating the mechanism of Bam-mediated OMP insertion, in addition to OMP function and activity within a phospholipid bilayer environment.     

Multispan mitochondrial outer membrane protein Ugo1 follows a unique Mim1-dependent import pathway

The mitochondrial outer membrane (MOM) harbors several multispan proteins that execute various functions. Despite their importance, the mechanisms by which these proteins are recognized and inserted into the outer membrane remain largely unclear. In this paper, we address this issue using yeast mitochondria and the multispan protein Ugo1. Using a specific insertion assay and analysis by native gel electrophoresis, we show that the import receptor Tom70, but not its partner Tom20, is involved in the initial recognition of the Ugo1 precursor. Surprisingly, the import pore formed by the translocase of the outer membrane complex appears not to be required for the insertion process. Conversely, the multifunctional outer membrane protein mitochondrial import 1 (Mim1) plays a central role in mediating the insertion of Ugo1. Collectively, these results suggest that Ugo1 is inserted into the MOM by a novel pathway in which Tom70 and Mim1 contribute to the efficiency and selectivity of the process.     

Insertion of newly synthesized proteins into the outer membrane of Escherichia coli.

The insertion of newly synthesized proteins into the outer membrane of Escherichia coli has been examined. The results show that there is no precurser pool of outer membrane proteins in the cytoplasmic membrane because first, the incorporation of a [35S]methionine pulse into outer membrane proteins completely parallels its incorporation into cytoplasmic membrane proteins, and second, under optimal isolation conditions, no outer membrane proteins are found in the cytoplasmic membrane, even when the membranes are analysed after being labeled for only 15 s. The [35S]methionine present in the outer membrane after a pulse of 15 s was found in protein fragments of varying sizes rather than in specific outer membrane proteins. This label could however be chased into specific proteins within 30--120 s, depending on the size of the protein, indicating that although unfinished protein fragments were present in the outer membrane, they were completed by subsequent chain elongation. Thus, outer membrane proteins are inserted into the outer membrane while still attached to ribosomes. Since ribosomes which are linked to the cell envelope by nascent polypeptide chains are stationary, the mRNA which is being translated by these ribosomes moves along the inner cell surface.     

Insertion and internalization of acetylcholine receptors at clustered and diffuse domains on cultured myotubes

Two populations of acetylcholine receptors (AChRs) are present in cultured myotubes. One forms large aggregates or clusters and the other has a much lower density of AChRs, which are diffusely distributed. Both clustered and diffuse AChRs are inserted and removed (internalized) from the sarcolemma. To determine the insertion and removal rates of AChRs in these two plasma membrane domains, we used a double label technique to distinguish and quantitate newly inserted and "old" AChRs. Application of our method revealed that the rate of AChR internalization is the same at the clustered and diffuse regions of the plasma membrane, whereas the rate of insertion is threefold greater at the clusters than elsewhere in the plasma membrane. Thus, the increase in AChR number at the clusters is not due to an increase in their half-life, but to an increase in their rate of insertion.     

Correct folding of the beta-barrel of the human membrane protein VDAC requires a lipid bilayer

Spontaneous membrane insertion and folding of beta-barrel membrane proteins from an unfolded state into lipid bilayers has been shown previously only for few outer membrane proteins of Gram-negative bacteria. Here we investigated membrane insertion and folding of a human membrane protein, the isoform 1 of the voltage-dependent anion-selective channel (hVDAC1) of mitochondrial outer membranes. Two classes of transmembrane proteins with either alpha-helical or beta-barrel membrane domains are known from the solved high-resolution structures. VDAC forms a transmembrane beta-barrel with an additional N-terminal alpha-helix. We demonstrate that similar to bacterial OmpA, urea-unfolded hVDAC1 spontaneously inserts and folds into lipid bilayers upon denaturant dilution in the absence of folding assistants or energy sources like ATP. Recordings of the voltage-dependence of the single channel conductance confirmed folding of hVDAC1 to its active form. hVDAC1 developed first beta-sheet secondary structure in aqueous solution, while the alpha-helical structure was formed in the presence of lipid or detergent. In stark contrast to bacterial beta-barrel membrane proteins, hVDAC1 formed different structures in detergent micelles and phospholipid bilayers, with higher content of beta-sheet and lower content of alpha-helix when inserted and folded into lipid bilayers. Experiments with mixtures of lipid and detergent indicated that the content of beta-sheet secondary structure in hVDAC1 decreased at increased detergent content. Unlike bacterial beta-barrel membrane proteins, hVDAC1 was not stable even in mild detergents such as LDAO or dodecylmaltoside. Spontaneous folding of outer membrane proteins into lipid bilayers indicates that in cells, the main purpose of membrane-inserted or associated assembly factors may be to select and target beta-barrel membrane proteins towards the outer membrane instead of actively assembling them under consumption of energy as described for the translocons of cytoplasmic membranes.