Spatial Simulations of Myxobacterial Development

Many bacteria exhibit multicellular behaviour, with individuals within a colony coordinating their actions for communal benefit. One example of complex multicellular phenotypes is myxobacterial fruiting body formation, where thousands of cells aggregate into large three-dimensional structures, within which sporulation occurs. Here we describe a novel theoretical model, which uses Monte Carlo dynamics to simulate and explain multicellular development. The model captures multiple behaviours observed during fruiting, including the spontaneous formation of aggregation centres and the formation and dissolution of fruiting bodies. We show that a small number of physical properties in the model is sufficient to explain the most frequently documented population-level behaviours observed during development in Myxococcus xanthus.     

Leben und Überleben im Boden

Myxobacteria - survivalists in soil Myxobacteria like Myxococccus xanthus are soil-living microorganisms featuring a complex lifestyle, including movement by coordinated swarming on surfaces, predatory feeding on other microorganisms, and the formation of multicellular fruiting bodies when unfavorable environmental conditions are encountered. Bioinformatic analysis of the large myxobacterial genomes has enabled fascinating insights into the molecular basis for the biosynthesis of complex secondary metabolite structures by myxobacteria, and has set the stage for the discovery of novel natural products. Moreover, well-characterized myxobacteria like M. xanthus increasingly play a role as “biochemical factories” for the biotechnological production of bioactive molecules using synthetic biology approaches.     

The Mechanistic Basis of Myxococcus xanthus Rippling Behavior and Its Physiological Role during Predation

Myxococcus xanthus cells self-organize into periodic bands of traveling waves, termed ripples, during multicellular fruiting body development and predation on other bacteria. To investigate the mechanistic basis of rippling behavior and its physiological role during predation by this Gram-negative soil bacterium, we have used an approach that combines mathematical modeling with experimental observations. Specifically, we developed an agent-based model (ABM) to simulate rippling behavior that employs a new signaling mechanism to trigger cellular reversals. The ABM has demonstrated that three ingredients are sufficient to generate rippling behavior: (i) side-to-side signaling between two cells that causes one of the cells to reverse, (ii) a minimal refractory time period after each reversal during which cells cannot reverse again, and (iii) physical interactions that cause the cells to locally align. To explain why rippling behavior appears as a consequence of the presence of prey, we postulate that prey-associated macromolecules indirectly induce ripples by stimulating side-to-side contact-mediated signaling. In parallel to the simulations, M. xanthus predatory rippling behavior was experimentally observed and analyzed using time-lapse microscopy. A formalized relationship between the wavelength, reversal time, and cell velocity has been predicted by the simulations and confirmed by the experimental data. Furthermore, the results suggest that the physiological role of rippling behavior during M. xanthus predation is to increase the rate of spreading over prey cells due to increased side-to-side contact-mediated signaling and to allow predatory cells to remain on the prey longer as a result of more periodic cell motility.     

Genetics of gliding motility and development inMyxococcus xanthus

Successful development in multicellular eukaryotes requires cell-cell communication and the coordinated spatial and temporal movements of cells. The complex array of networks required to bring eukaryotic development to fruition can be modeled by the development of the simpler prokaryoteMyxococcus xanthus. As part of its life cycle,M. xanthus forms multicellular fruiting bodies containing differentiated cells. Analysis of the genes essential forM. xanthus development is possible because strains with mutations that block development can be maintained in the vegetative state. Development inM. xanthus is induced by starvation, and early events in development suggest that signaling, stages have evolved to monitor the metabolic state of the developing cell. In the absence of these signals, which include amino acids, α-keto acids, and other intermediary metabolites, the ability of cells to differentiate into myxospores is impaired. Mutations that block genes controlling gliding, motility disrupt the morphogenesis of fruiting bodies and sporogenesis in surprising ways. In this review, we present data that encourage future genetic and biochemical studies of the relationships between motility, cell-cell signaling, and development inM. xanthus.     

不同分离方法对子实体形成和粘细菌分离的影响

【目的】基于模拟原位环境策略、可培养粘细菌的营养策略及细菌互作网络,改良分离培养基,以提高分离粘细菌的多样性。【方法】通过添加土壤浸提液、使用不同种类的诱导菌和改变诱导菌的接种方式设置分离方法,同时以传统的分离方法作对照。【结果】改良的分离方法比对照组诱导出了更多粘细菌子实体种类,采自4个地区的9份样品共分离纯化出40株粘细菌,按形态学和分子生物学,将其归类于原囊菌属(Archangium)、珊瑚菌属(Corallococcus)、软骨霉状菌属(Chondromyces)、粘球菌属(Myxococcus)、侏囊菌属(Nannocystis)、多囊菌属(Polyangium)、匣状球菌属(Pyxidicoccus)。【结论】与传统分离方法相比,添加土壤浸提液,诱导菌点接法能大大提高诱导出的粘细菌子实体种类的数目,革兰氏阳性菌和革兰氏阴性菌作为诱导菌对子实体种类影响较小,但是也发现革兰氏阳性菌特异性诱导出的子实体。虽然本研究通过对分离培养基的改良大大增加了子实体种类,但是纯化出的粘细菌种类远少于观察到的子实体种类,说明除改良分离方法外,还需进一步研究粘细菌的纯化方法,提高分离所得粘细菌的多样性,获取更多粘细菌新资源。     

Pattern formation: fruiting body morphogenesis in Myxococcus xanthus

When Myxococcus xanthus cells are exposed to starvation, they respond with dramatic behavioral changes. The expansive swarming behavior stops and the cells begin to aggregate into multicellular fruiting bodies. The cell-surface-associated C-signal has been identified as the signal that induces aggregation. Recently, several of the components in the C-signal transduction pathway have been identified and behavioral analyses are beginning to reveal how the C-signal modulates cell behavior. Together, these findings provide a framework for understanding how a cell-surface-associated morphogen induces pattern formation.     

The peptidoglycan sacculus of Myxococcus xanthus has unusual structural features and is degraded during glycerol-induced myxospore development

Upon nutrient limitation cells of the swarming soil bacterium Myxococcus xanthus form a multicellular fruiting body in which a fraction of the cells develop into myxospores. Spore development includes the transition from a rod-shaped vegetative cell to a spherical myxospore and so is expected to be accompanied by changes in the bacterial cell envelope. Peptidoglycan is the shape-determining structure in the cell envelope of most bacteria, including myxobacteria. We analyzed the composition of peptidoglycan isolated from M. xanthus. While the basic structural elements of peptidoglycan in myxobacteria were identical to those in other gram-negative bacteria, the peptidoglycan of M. xanthus had unique structural features. meso- or LL-diaminopimelic acid was present in the stem peptides, and a new modification of N-acetylmuramic acid was detected in a fraction of the muropeptides. Peptidoglycan formed a continuous, bag-shaped sacculus in vegetative cells. The sacculus was degraded during the transition from vegetative cells to glycerol-induced myxospores. The spherical, bag-shaped coats isolated from glycerol-induced spores contained no detectable muropeptides, but they contained small amounts of N-acetylmuramic acid and meso-diaminopimelic acid.     

Multicellular development in Myxococcus xanthus is stimulated by predator-prey interactions

Myxococcus xanthus is a predatory bacterium that exhibits complex social behavior. The most pronounced behavior is the aggregation of cells into raised fruiting body structures in which cells differentiate into stress-resistant spores. In the laboratory, monocultures of M. xanthus at a very high density will reproducibly induce hundreds of randomly localized fruiting bodies when exposed to low nutrient availability and a solid surface. In this report, we analyze how M. xanthus fruiting body development proceeds in a coculture with suitable prey. Our analysis indicates that when prey bacteria are provided as a nutrient source, fruiting body aggregation is more organized, such that fruiting bodies form specifically after a step-down or loss of prey availability, whereas a step-up in prey availability inhibits fruiting body formation. This localization of aggregates occurs independently of the basal nutrient levels tested, indicating that starvation is not required for this process. Analysis of early developmental signaling relA and asgD mutants indicates that they are capable of forming fruiting body aggregates in the presence of prey, demonstrating that the stringent response and A-signal production are surprisingly not required for the initiation of fruiting behavior. However, these strains are still defective in differentiating to spores. We conclude that fruiting body formation does not occur exclusively in response to starvation and propose an alternative model in which multicellular development is driven by the interactions between M. xanthus cells and their cognate prey.     

Cell flexibility affects the alignment of model myxobacteria

Myxobacteria are social bacteria that exhibit a complex life cycle culminating in the development of multicellular fruiting bodies. The alignment of rod-shaped myxobacteria cells within populations is crucial for development to proceed. It has been suggested that myxobacteria align due to mechanical interactions between gliding cells and that cell flexibility facilitates reorientation of cells upon mechanical contact. However, these suggestions have not been based on experimental or theoretical evidence. Here we created a computational mass-spring model of a flexible rod-shaped cell that glides on a substratum periodically reversing direction. The model was formulated in terms of experimentally measurable mechanical parameters, such as engine force, bending stiffness, and drag coefficient. We investigated how cell flexibility and motility engine type affected the pattern of cell gliding and the alignment of a population of 500 mechanically interacting cells. It was found that a flexible cell powered by engine force at the rear of the cell, as suggested by the slime extrusion hypothesis for myxobacteria motility engine, would not be able to glide in the direction of its long axis. A population of rigid reversing cells could indeed align due to mechanical interactions between cells, but cell flexibility impaired the alignment.     

Molecular Recognition by a Polymorphic Cell Surface Receptor Governs Cooperative Behaviors in Bacteria

Cell-cell recognition is a fundamental process that allows cells to coordinate multicellular behaviors. Some microbes, such as myxobacteria, build multicellular fruiting bodies from free-living cells. However, how bacterial cells recognize each other by contact is poorly understood. Here we show that myxobacteria engage in recognition through interactions between TraA cell surface receptors, which leads to the fusion and exchange of outer membrane (OM) components. OM exchange is shown to be selective among 17 environmental isolates, as exchange partners parsed into five major recognition groups. TraA is the determinant of molecular specificity because: (i) exchange partners correlated with sequence conservation within its polymorphic PA14-like domain and (ii) traA allele replacements predictably changed partner specificity. Swapping traA alleles also reprogrammed social interactions among strains, including the regulation of motility and conferred immunity from inter-strain killing. We suggest that TraA helps guide the transition of single cells into a coherent bacterial community, by a proposed mechanism that is analogous to mitochondrial fusion and fission cycling that mixes contents to establish a homogenous population. In evolutionary terms, traA functions as a rare greenbeard gene that recognizes others that bear the same allele to confer beneficial treatment.     

Functional Organization of a Multimodular Bacterial Chemosensory Apparatus

Chemosensory systems (CSS) are complex regulatory pathways capable of perceiving external signals and translating them into different cellular behaviors such as motility and development. In the δ-proteobacterium Myxococcus xanthus, chemosensing allows groups of cells to orient themselves and aggregate into specialized multicellular biofilms termed fruiting bodies. M. xanthus contains eight predicted CSS and 21 chemoreceptors. In this work, we systematically deleted genes encoding components of each CSS and chemoreceptors and determined their effects on M. xanthus social behaviors. Then, to understand how the 21 chemoreceptors are distributed among the eight CSS, we examined their phylogenetic distribution, genomic organization and subcellular localization. We found that, in vivo, receptors belonging to the same phylogenetic group colocalize and interact with CSS components of the respective phylogenetic group. Finally, we identified a large chemosensory module formed by three interconnected CSS and multiple chemoreceptors and showed that complex behaviors such as cell group motility and biofilm formation require regulatory apparatus composed of multiple interconnected Che-like systems.     

Growth of Myxococcus xanthus in Continuous-Flow-Cell Bioreactors as a Method for Studying Development

Nutrient sensors and developmental timers are two classes of genes vital to the establishment of early development in the social soil bacterium Myxococcus xanthus. The products of these genes trigger and regulate the earliest events that drive the colony from a vegetative state to aggregates, which ultimately leads to the formation of fruiting bodies and the cellular differentiation of the individual cells. In order to more accurately identify the genes and pathways involved in the initiation of this multicellular developmental program in M. xanthus, we adapted a method of growing vegetative populations within a constant controllable environment by using flow cell bioreactors, or flow cells. By establishing an M. xanthus community within a flow cell, we are able to test developmental responses to changes in the environment with fewer concerns for effects due to nutrient depletion or bacterial waste production. This approach allows for greater sensitivity in investigating communal environmental responses, such as nutrient sensing. To demonstrate the versatility of our growth environment, we carried out time-lapse confocal laser scanning microscopy to visualize M. xanthus biofilm growth and fruiting body development, as well as fluorescence staining of exopolysaccharides deposited by biofilms. We also employed the flow cells in a nutrient titration to determine the minimum concentration required to sustain vegetative growth. Our data show that by using a flow cell, M. xanthus can be held in a vegetative growth state at low nutrient concentrations for long periods, and then, by slightly decreasing the nutrient concentration, cells can be allowed to initiate the developmental program.     

Glycine Betaine Biosynthesized from Glycine Provides an Osmolyte for Cell Growth and Spore Germination during Osmotic Stress in Myxococcus xanthus

Glycine sarcosine methyltransferase (Gsm) and sarcosine dimethylglycine methyltransferase (Sdm) catalyze glycine betaine synthesis from glycine. Disruption of the M. xanthus gsmA (MXAN 7068) or sdmA (MXAN 3190) gene, encoding Gsm or Sdm homologue proteins, respectively, generated mutants that exhibited a longer lag period of growth and delayed spore germination under osmostress.Myxococcus xanthus is a Gram-negative bacterium that exhibits a complex multicellular developmental cycle (6, 7). These bacteria live in soil, where they prey on other microbes for food. In response to nutritional stress, hundreds of thousands of vegetative cells aggregate to form multicellular fruiting bodies containing differentiated myxospores. Once conditions become favorable for growth, the desiccation- and heat-resistant spores can germinate and initiate vegetative growth.It was reported previously that the receptor-type adenylyl cyclases CyaA and CyaB of M. xanthus act as osmosensors during spore germination and growth, respectively (8, 9). Glycine betaine is a very efficient osmolyte found in a wide range of prokaryotic and eukaryotic organisms, where it is accumulated at high cytoplasmic concentrations in response to osmotic stress (4, 16). In this study, it is reported that in M. xanthus glycine betaine can be biosynthesized from glycine and mainly functions as an osmoprotectant for cell growth and spore germination under osmotic stress conditions.     

Deoxyribonucleic Acid Homology Among the Fruiting Myxobacteria

Deoxyribonucleic acid similarities were determined by competition experiments. The several strains of fruiting myxobacteria tested showed from 23 to 89% homology with the reference strains Myxococcus xanthus (FB) and M. fulvus (M6).     

Identification and Characterization of the Myxococcus xanthus argE Gene

The chromosomal acetylornithine deacetylase (argE) gene of Myxococcus xanthus was identified via homology to acetylornithine deacetylases from other bacterial species. A mutant carrying a disruption in argE was unable to grow on minimal media lacking supplemental arginine and formed fruiting bodies and spores in response to arginine starvation at high cell density.     

Excreted adenosine is a cell density signal for the initiation of fruiting body formation in Myxococcus xanthus

Myxococcus xanthus is a bacterium that forms multicellular fruiting bodies in response to starvation. The initiation of fruiting body formation is cell density dependent, and we suggest that cells measure their cell density by titering the extracellular concentration of excreted adenosine. Our evidence is as follows: (1) At low cell densities fruiting body formation does not occur unless adenosine is added. (2) Norit, a substance that binds purines, inhibits fruiting body formation, and this inhibition is reversed by adenosine. (3) Cells labeled with [¹⁴C]carbonate excrete [¹⁴C]adenosine which is bound by the Norit. Furthermore, [¹⁴C]adenosine is excreted by developing cells at a concentration that will induce fruiting body formation at low cell density. The extracellular adenosine concentration increases with the cell density over a broad range of densities. (4) Hadacidin, an inhibitor of de novo AMP synthesis, inhibits fruiting body formation, and inhibition by hadacidin can be reversed with adenosine. Adenosine also appears to be involved in the aggregation process because the shape and size of the fruiting bodies are sensitive to the external concentration of adenosine.