Biosynthesis of Novel Exopolymers by Aureobasidium pullulans

Aureobasidium pullulans ATCC 42023 was cultured under aerobic conditions with glucose, mannose, and glucose analogs as energy sources. The exopolymer extracts produced under these conditions were composed of glucose and mannose. The molar ratio of glucose to mannose in the exopolymer extract and the molecular weight of the exopolymer varied depending on the energy source and culture time. The glucose content of exopolymer extracts formed with glucose and mannose as the carbon sources was between 91 and 87%. The molecular weight decreased from 3.5 × 10⁶ to 2.12 × 10⁶ to 0.85 × 10⁶ to 0.77 × 10⁶ with culture time. As the culture time increased, the glucose content of the exopolymer extract formed with glucosamine decreased from 55 ± 3 to 29 ± 2 mol%, and the molecular weight increased from 2.73 × 10⁶ to 4.86 × 10⁶. There was no evidence that glucosamine was directly incorporated into exopolymers. The molar ratios of glucose to mannose in exopolymer extracts ranged from 87 ± 3:13 ± 3 to 28 ± 2:72 ± 2 and were affected by the energy source added. On the basis of the results of an enzyme hydrolysis analysis of the exopolymer extracts and the compositional changes observed, mannose (a repeating unit) was substituted for glucose, which gave rise to a new family of exopolymer analogs.     

Rheology and composition of a multi-utility exopolymer from a desert borne cyanobacterium Anabaena variabilis

The desert cyanobacterium Anabaena variabilis produces an exopolymer during the stationary growth phase in batch culture. Optimal polymer production was observed at pH?10 under phosphorus limitation. Chemical analysis showed it to be composed of 49% carbohydrate and 19% protein. Monosaccharide analysis revealed a heteropolysaccharidic nature with glucose, mannose, and galactose as the main neutral sugars. Infrared (IR) spectrum of the exopolymer showed absorption bands at 1,645 and 1,421?cm^?1 characteristic of C=O in the carboxylate group. Strong band was observed at 1,072?cm^?1 due to C–O–C or C–O–P stretching vibrations. A band at 2,363?cm^?1 corresponding to C–H stretch of protein was also observed. IR spectrum suggested that the exopolymer is nonsulfated. Rheological properties of the polymer showed marked shear thinning non-Newtonian behavior in the concentration range of 0.1–0.4%. However, it appeared to undergo change in the internal structure on shearing thereby exhibiting thixotropic behavior. The polymer possessed 75% flocculating ability vis a vis alum, 71% emulsification of hexadecane, and good thermal stability making it a potent candidate for multiple industrial applications. The exopolymer bound 156?g H₂O g^?1 and exhibited antibacterial activity against Staphylococcus aureus suggesting a potential for application in wound management as well.     

Long-term survival and resistance of submerged pseudomonad cultures in the exopolymer mass

An issue on the cellular forms that ensure survival of pseudomonads is important due to wide occurrence of these bacteria in the environment and their role for clinical microbiology. The present work demonstrates the high survival potential of Pseudomonas aurantiaca and P. аeruginosa in the mass of exopolymers produced by cells. Exopolymer formation occurred only during incubation of the post-stationary phase cultures of P. aurantiaca (at 4°C) and P. aeruginosa (at 4 and 20°C). After storage for 1.5–12 months, the number of colony-forming units in the exopolymer was 30 to 68% of the viable cell titer in stationary-phase cultures. Antibiotic-tolerant persister cells that were revealed in the exopolymer cultures after treatment with ciprofloxacin (2.5–100 μg/mL) were more resistant to the antibiotic than persisters in suspension cultures, with the threshold doses of 25 and 2.5 μg/mL, respectively. The cells embedded in the exopolymer were found to be more resistant to 5-min heating at 60–70°C than the vegetative cells of suspension cultures, which did not survive such heat treatment conditions. Electron microscopic investigation revealed morphological heterogeneity of exopolymer-embedded pseudomonads, including the presence of the cells similar to cystlike dormant forms. The populations developing on solid media inoculated with the exopolymer mass with cells were found to contain 1.5 to 2 orders of magnitude more persisters tolerant to high ciprofloxacin doses (25 μg/mL for P. aurantiaca and 100 μg/mL for P. aeruginosa) than the populations developing after inoculation with second-transfer vegetative cells of the cells of planktonic cultures. The results obtained improve our understanding of pseudomonad survival in the environment.     

The Bacterivorous Soil Flagellate Heteromita globosa Reduces Bacterial Clogging under Denitrifying Conditions in Sand-Filled Aquifer Columns

An exopolymer (slime)-producing soil bacterium Pseudomonas sp. (strain PS+) rapidly clogged sand-filled columns supplied with air-saturated artificial groundwater containing glucose (500 mg liter⁻¹) as a sole carbon source and nitrate (300 mg liter⁻¹) as an alternative electron acceptor. After 80 days of operation under denitrifying conditions, the effective porosity and saturated hydraulic conductivity (permeability) of sand in these columns had fallen by 2.5- and 26-fold, respectively. Bacterial biofilms appeared to induce clogging by occluding pore spaces with secreted exopolymer, although there may also have been a contribution from biogas generated during denitrification. The bacterivorous soil flagellate Heteromita globosa minimized reductions in effective porosity (1.6-fold) and permeability (13-fold), presumably due to grazing control of biofilms. Grazing may have limited growth of bacterial biomass and hence the rate of exopolymer and biogas secretion into pore spaces. Evidence for reduction in biogas production is suggested by increased nitrite efflux from columns containing flagellates, without a concomitant increase in nitrate consumption. There was no evidence that flagellates could improve flow conditions if added once clogging had occurred (60 days). Presumably, bacterial biofilms and their secretions were well established at that time. Nevertheless, this study provides evidence that bacterivorous flagellates may play a positive role in maintaining permeability in aquifers undergoing remediation treatments.     

The role of exopolymers in the attachment of sphingomonas paucimobilis

The importance of exopolymers in the adhesion of Sphingomonas paucimobilis was established by studying the attachment to glass of three mutants with defective gellan production. The attachment assays were performed in either phosphate buffered saline (controls) or in the exopolymeric solutions produced by the mutants. The exopolymer was found to have surface active properties, changing the glass surface from hydrophilic to hydrophobic, making adhesion thermodynamically favourable. Only the cells that had a substantial polymeric layer surrounding their walls were able to significantly colonise glass coated with the exopolymer. It is hypothesised that the exopolymer bound to the glass and the exopolymer present at the surface of the bacteria bound together, overcoming the energy barrier created by the negative charge of both surfaces. It is concluded that the exopolymer from S. paucimobilis has a dual role in the process of adhesion by both coating the surface thereby strengthening adhesion and by enhancing adhesion through the establishment of polymeric bridges.     

Influence of exopolymers produced by bacterial cells on hydrophobicity of substrate surface

Exopolymers produced during copper bioleaching from copper sulphides could modify the surface of substrata. The substrate surface was more hydrophobic for exopolymer solution than for water or control sample and the changes depended on the concentration of exopolymer solution. When the concentration of exopolymer was close to that in the environment, the changes were more significant. It appears that the structure of exopolymer is important and dependent on the degree of molecule hydration.     

Attachment Stimulates Exopolysaccharide Synthesis by a Bacterium

This study examined the hypothesis that solid surfaces may stimulate attached bacteria to produce exopolymers. Addition of sand to shake-flask cultures seemed to induce exopolymer synthesis by a number of subsurface isolates, as revealed by optical microscopy. Several additional lines of evidence indicated that exopolymer production by attached cells (in continuous-flow sand-packed columns) was greater than by their free-living counterparts. Total carbohydrates and extracellular polysaccharides, both normalized to cell protein, were greater (2.5- and 5-fold, respectively) for attached cells than for free-living cells. Also, adsorption of a polyanion-binding dye to the exopolymer fraction was sixfold greater for attached cells than for unattached cells. When surface-grown cells were resuspended in fresh medium, exopolymer production decreased to the level characteristic of unattached cells, which ruled out the possibility that attached cells comprised a subpopulation of sticky mucoid variants. The mechanism by which attachment stimulated exopolymer synthesis did not involve changes of the specific growth rate, growth stage, or limiting nutrient.     

The Role of Exopolymers Produced by Sphingomonas paucimobilis in Biofilm Formation and Composition

Exopolymers have been associated with the initial adhesion of bacteria, which is the primary step for biofilm formation. Moreover, the polymeric matrix of biofilms has a considerable influence on some of the most important physical and physiological properties of biofilms. The role of extracellular polymers in biofilm formation was studied using three mutants of Sphingomonas paucimobilis with increasing capabilities for exopolymer production. The physical, biochemical and physiological properties of three different layers of each biofilm were determined. The layers were detached by submitting the biofilm to increasing shear stress. The results revealed that the presence of exopolymers in the growth medium was essential for biofilm formation. The mutant producing the highest amount of exopolymer formed very thick biofilms, while the biofilms formed by the medium exopolymer producer were on average 8 times thinner. The lowest exopolymer producer did not form biofilm. In both types of biofilms, exopolymer density increased with depth, although this tendency was more significant in thinner biofilms. Cell distribution was also more heterogeneous in thinner biofilms, exhibiting a greater accumulation of cells in the inner layers. The thicker biofilms had very low activity in the inner layer. This was related to a high accumulation of proteins and DNA in this layer due to cell lysis and hydrolytic activity. Activity in the thin biofilm was constant throughout its depth, suggesting that there was no nutrient limitation. The production of exopolymers by each cell was constant throughout the depth of the biofilms, although it was greater in the case of the higher producer.     

Biosynthesis of novel exopolymers by Aureobasidium pullulans

Aureobasidium pullulans ATCC 42023 was cultured under aerobic conditions with glucose, mannose, and glucose analogs as energy sources. The exopolymer extracts produced under these conditions were composed of glucose and mannose. The molar ratio of glucose to mannose in the exopolymer extract and the molecular weight of the exopolymer varied depending on the energy source and culture time. The glucose content of exopolymer extracts formed with glucose and mannose as the carbon sources was between 91 and 87%. The molecular weight decreased from 3.5 x 10(6) to 2.12 x 10(6) to 0.85 x 10(6) to 0.77 x 10(6) with culture time. As the culture time increased, the glucose content of the exopolymer extract formed with glucosamine decreased from 55 +/- 3 to 29 +/- 2 mol%, and the molecular weight increased from 2.73 x 10(6) to 4.86 x 10(6). There was no evidence that glucosamine was directly incorporated into exopolymers. The molar ratios of glucose to mannose in exopolymer extracts ranged from 87 +/- 3:13 +/- 3 to 28 +/- 2:72 +/- 2 and were affected by the energy source added. On the basis of the results of an enzyme hydrolysis analysis of the exopolymer extracts and the compositional changes observed, mannose (a repeating unit) was substituted for glucose, which gave rise to a new family of exopolymer analogs.     

Production of Biogenic Mn Oxides by Leptothrix discophora SS-1 in a Chemically Defined Growth Medium and Evaluation of Their Pb Adsorption Characteristics

Biogenic Mn oxides were produced by the bacterium Leptothrix discophora SS-1 (= ATCC 3182) in a chemically defined mineral salts medium, and the Pb binding and specific surface area of these oxides were characterized. Growth of SS-1 in the defined medium with pyruvate as a carbon and energy source required the addition of vitamin B₁₂. Complete oxidation of Mn(II) within 60 h required the addition of ≥0.1 μM FeSO₄. Pb adsorption isotherms were determined for the biogenic Mn oxides (and associated cells with their extracellular polymer) and compared to the Pb adsorption isotherms of cells and exopolymer alone, as well as to abiotic Mn oxides. The Pb adsorption to cells and exopolymer with biogenic Mn oxides (0.8 mmol of Mn per g) at pH 6.0 and 25°C was 2 orders of magnitude greater than the Pb adsorption to cells and exopolymer alone (on a dry weight basis). The Pb adsorption to the biogenic Mn oxide was two to five times greater than the Pb adsorption to a chemically precipitated abiotic Mn oxide and several orders of magnitude greater than the Pb adsorption to two commercially available crystalline MnO₂ minerals. The N₂ Brunauer-Emmet-Teller specific surface areas of the biogenic Mn oxide and fresh Mn oxide precipitate (224 and 58 m²/g, respectively) were significantly greater than those of the commercial Mn oxide minerals (0.048 and 4.7 m²/g). The Pb adsorption capacity of the biogenic Mn oxide also exceeded that of a chemically precipitated colloidal hydrous Fe oxide under similar solution conditions. These results show that amorphous biogenic Mn oxides similar to those produced by SS-1 may play a significant role in the control of trace metal phase distribution in aquatic systems.     

Correlation between localized anodic areas and Oceanospirillum biofilms on copper

The marine bacterium Oceanospirillum produces copious amounts of exopolymer when grown on copper surfaces and binds Cu⁺² from the substratum. The organism and associated exopolymers result in local anodic regions that can be detected by scanning vibrating electrode microscopy. Oceanospirillum was grown in small laminar flow cells with two carbon sources on copper and 316 stainless steel as substrata. The chemical composition of the exopolymer varied with growth medium, but not with substratum. Exopolymers from cells grown in glutamic acid medium on both substrata contained glucose with no other sugar monomers or uronic acids. The quantity of exopolymer did vary with substratum and copper promoted greater polymer production that stainless steel.     

Molecular characterization of acutely and gradually heavy metal acclimated aquatic bacteria by FTIR spectroscopy

In the environment, bacteria can be exposed to the concentration gradient of toxic heavy metals (gradual) or sudden high concentration of them (acute). In both situations, bacteria get acclimated to toxic heavy metal concentrations. Acclimation causes metabolic and molecular changes in bacteria. In this study, we aimed to understand whether there are differences between molecular profiles of the bacteria (Brevundimonas, Gordonia and Microbacterium) which are under acute or gradual exposure to cadmium or lead by using ATR‐FTIR spectroscopy. Our results revealed the differences between the acclimation groups in membrane dynamics including changes in the structure and composition of the membrane lipids and proteins. Furthermore, protein concentrations decreased in acclimated bacterial groups. Also, a remarkable increase in exopolymer production occurred in acclimated groups. Interestingly, bacteria under acute cadmium exposure produced the significantly higher amount of exopolymer than they did under gradual exposure. On the contrary, under lead exposure gradually acclimate strains produced significantly higher amounts of exopolymer than those of acutely acclimated ones. This information can be used in bioremediation studies to obtain bacterial strains producing a higher amount of exopolymer.      

Extracellular products as mediators of the formation and detachment of Pseudomonas fluorescens biofilms

Pseudomonas fluorescens B52 produces substantial biofilms at the air/liquid/solid interface of glass coverslips clamped vertically and partly submerged in liquid medium at 21°C. Biofilm formation was maximal ca. 20–50 h after inoculation of the liquid medium and, as indicated by environmental scanning electron microscopy (ESEM), contained large numbers of bacterial cells that were embedded within an extensive exopolymeric matrix. Incubation beyond 50 h led to reductions in biofilm which ESEM related primarily to losses of exopolymer. Both biofilm formation and the subsequent decline in exopolymer deposition was more rapid, and occurred to greater extents, when supernatants from two-day old cultures of B52 were used as the initial growth media. The addition of N-acyl-hexanoyl homoserine lactone to fresh growth medium had a similar effect upon biofilm formation as using spent culture medium. Homoserine lactones could not be demonstrated in spent culture supernatants by an Agrobacterium tumefaciens bioassay. An exopolysaccharide lyase was detected in spent culture media taken from dense biofilm cultures whose action was specifically directed towards biofilm exopolysaccharide. Results suggest that (i) cell-cell signals such as homoserine lactones are associated with the formation of P. fluorescens biofilms, (ii) the enzymic degradation of exopolymers has a specific role in the detachment of cells under starvation conditions, and (iii) whilst short chain (C₆) exogenous homoserines can trigger such responses in P. fluorescens, its own signal substance is likely to possess a longer (>C₈) fatty acyl chain.     

A New Pathogen Transmission Mechanism in the Ocean: The Case of Sea Otter Exposure to the Land-Parasite Toxoplasma gondii

Toxoplasma gondii is a land-derived parasite that infects humans and marine mammals. Infections are a significant cause of mortality for endangered southern sea otters (Enhydra lutris nereis), but the transmission mechanism is poorly understood. Otter exposure to T. gondii has been linked to the consumption of marine turban snails in kelp (Macrocystis pyrifera) forests. It is unknown how turban snails acquire oocysts, as snails scrape food particles attached to surfaces, whereas T. gondii oocysts enter kelp beds as suspended particles via runoff. We hypothesized that waterborne T. gondii oocysts attach to kelp surfaces when encountering exopolymer substances (EPS) forming the sticky matrix of biofilms on kelp, and thus become available to snails. Results of a dietary composition analysis of field-collected snails and of kelp biofilm indicate that snails graze the dense kelp-biofilm assemblage composed of pennate diatoms and bacteria inserted within the EPS gel-like matrix. To test whether oocysts attach to kelp blades via EPS, we designed a laboratory experiment simulating the kelp forest canopy in tanks spiked with T. gondii surrogate microspheres and controlled for EPS and transparent exopolymer particles (TEP - the particulate form of EPS). On average, 19% and 31% of surrogates were detected attached to kelp surfaces covered with EPS in unfiltered and filtered seawater treatments, respectively. The presence of TEP in the seawater did not increase surrogate attachment. These findings support a novel transport mechanism of T. gondii oocysts: as oocysts enter the kelp forest canopy, a portion adheres to the sticky kelp biofilms. Snails grazing this biofilm encounter oocysts as ‘bycatch’ and thereby deliver the parasite to sea otters that prey upon snails. This novel mechanism can have health implications beyond T. gondii and otters, as a similar route of pathogen transmission may be implicated with other waterborne pathogens to marine wildlife and humans consuming biofilm-feeding invertebrates.     

Seasonal microbial community dynamics correlate with phytoplankton-derived polysaccharides in surface coastal waters

Phytoplankton produce large amounts of polysaccharide gel material known as transparent exopolymer particles (TEP). We investigated the potential links between phytoplankton-derived TEP and microbial community structure in the sea surface microlayer and underlying water at the English Channel time-series station L4 during a spring diatom bloom, and in two adjacent estuaries. Major changes in bacterioneuston and bacterioplankton community structure occurred after the peak of the spring bloom at L4, and coincided with the significant decline of microlayer and water column TEP. Increased abundance of Flavobacteriales and Rhodobacterales in bacterioneuston and bacterioplankton communities at L4 was significantly related to the TEP decline, indicating that both taxa could be responsible. The results suggest that TEP is an important factor in determining microbial diversity in coastal waters, and that TEP utilisation could be a niche occupied by Flavobacteriales and Rhodobacterales.     

Hexose phosphate metabolism and exopolysaccharide formation inPseudomonas cepacia

When grown on solid medium containing excess glucose, glucose dehydrogenase-deficient (Gcd^–) mutants ofPseudomonas cepacia 249 formed large amounts of an exopolysaccharide comprised of galactose, glucose, mannose, glucuronic acid, and rhamnose. The Gcd⁺ parent strain failed to accumulate comparable amounts of exopolymer from glucose because of its rapid conversion of glucose to gluconic and 2-ketogluconic acids and its lower content of enzymes related to glucose-1-phosphate synthesis. Both Gcd⁺ and Gcd^– strains ofP. cepacia accumulated exopolymer when substrates such as mannitol and glycerol were substituted for glucose. A survey of clinical isolates from patients with cystic fibrosis indicated that there was no correlation between ability ofP. cepacia to colonize the respiratory tracts of such individuals and increased capacity to form exopolymer related to glucose dehydrogenase deficiency.     

Modulation of DEG/ENaCs by Amphiphiles Suggests Sensitivity to Membrane Alterations

The bile acid-sensitive ion channel is activated by amphiphilic substances such as bile acids or artificial detergents via membrane alterations; however, the mechanism of membrane sensitivity of the bile acid-sensitive ion channel is not known. It has also not been systematically investigated whether other members of the degenerin/epithelial Na⁺ channel (DEG/ENaC) gene family are affected by amphiphilic compounds. Here, we show that DEG/ENaCs ASIC1a, ASIC3, ENaC, and the purinergic receptor P2X2 are modulated by a large number of different, structurally unrelated amphiphilic substances, namely the detergents N-lauroylsarcosine, Triton X-100, and β-octylglucoside; the fenamate flufenamic acid; the antipsychotic drug chlorpromazine; the natural phenol resveratrol; the chili pepper compound capsaicin; the loop diuretic furosemide; and the antiarrythmic agent verapamil. We determined the modification of membrane properties using large-angle x-ray diffraction experiments on model lipid bilayers, revealing that the amphiphilic compounds are positioned in a characteristic fashion either in the lipid tail group region or in the lipid head group region, demonstrating that they perturbed the membrane structure. Collectively, our results show that DEG/ENaCs and structurally related P2X receptors are modulated by diverse amphiphilic molecules. Furthermore, they suggest alterations of membrane properties by amphiphilic compounds as a mechanism contributing to modulation.     

The examination of Seliberia stellata exopolymers using lectin assays

Holdfast exopolymers of the dimorphic oligotrophic bacterium Seliberia stellata were examined using fluorescent lectins under light microscopy and colloidal gold lectins using transmission electron microscopy. Examination using fluorescent-labeled lectins revealed that lectins specific for polysaccharides and monosaccharides such as glucose and/or mannose, galactose, N-acetylgalactosamine, and N-acetylglucosamine (and its dimer) adhered to holdfast structure. Colloidal gold-labeled lectin assays also suggested the presence of these sugars. Both the holdfast that mediates swarmer cell adhesion and the holdfast that facilitates rosette formation gave similar results, suggesting the structures may be the same. Another exopolymer produced later in the growth cycle was observed using transmission electron microscopy. It appeared as an amorphous glycocalyx-like material very different from holdfast exopolymers. Retention of the gold lectin Wheat Germ Agglutinin (WGA), suggested the presence of N-acetylglucosamine, but fluorescent analyses were unsuccessful. The data suggest that S. stellata produces at least two different exopolymers: (a) the exopolymer of the swarmer cell and rosette holdfast whose function is adhesion and whose composition is (but may not be limited to) polysaccharides and (b) a slime-like exopolymer whose composition and function remain unknown. Correspondence: M.A. Hood     

Microscale evaluation of the effects of grazing by invertebrates with contrasting feeding modes on river biofilm architecture and composition

River biofilms are a valuable food resource for many invertebrates. In the present study biofilms were cultivated in a rotating annular bioreactor with river water as sole source of inoculum. The resulting biofilms were then presented to starved snails, ostracods, and mayflies as sole food source. The biofilms were then removed and microscopically examined to determine areas that had been grazed. The grazed and ungrazed areas were marked and analyzed for the effects of grazing using confocal laser scanning microscopy and image analyses. Samples were treated with fluorescent probes for nucleic acids to quantify bacterial biomass and fluor-conjugated lectins to quantify exopolymer, and far red autofluorescence was imaged to quantify algal or photosynthetic biomass. Grazing by snails significantly reduced algal biomass (1.1 +/- 0.6 micro m 3 micro m 2 to 0.02 +/- 0.04 micro m 3 micro m 2), exopolymer (5.3 +/- 3.4 micro m 3 micro m 2 to 0.18 +/- 0.18 micro m 3 micro m 2), and biofilm thickness (154 micro m +/- 50 to 11 micro m +/- 5.2; ANOVA, p < or= 0.05). Although bacterial biomass was influenced by grazing snails the impact was not statistically significant (p 相似文献   

Characterization of a Sinorhizobium Isolate and Its Extracellular Polymer Implicated in Pollutant Transport in Soil

A bacterium isolated from soil (designated 9702-M4) synthesizes an extracellular polymer that facilitates the transport of such hydrophobic pollutants as polynuclear aromatic hydrocarbons, as well as the toxic metals lead and cadmium in soil. Biolog analysis, growth rate determinations, and percent G+C content identify 9702-M4 as a strain of Sinorhizobium meliloti. Sequence analysis of a 16S rDNA fragment gives 9702-M4 a phylogenetic designation most closely related to Sinorhizobium fredii. The extracellular polymer of isolate 9702-M4 is composed of both an extracellular polysaccharide (EPS) and a rough lipopolysaccharide. The EPS component is composed mainly of 4-glucose linkages with monomers of galactose, mannose, and glucuronic acid and has pyruval and acetyl constituents. The lipid fraction and the negative charge associated with carbonyl groups of the exopolymer are thought to account for the binding of polynuclear aromatic hydrocarbons and cationic metals.