Characterization of Cellulose Production by a Gluconacetobacter xylinus Strain from Kombucha

The aims of this work were to characterize and improve cellulose production by a Gluconoacetobacter xylinus strain isolated from Kombucha and determine the purity and some structural features of the cellulose from this strain. Cellulose yield in tea medium with both black tea and green tea and in Hestrin and Schramm (HS) medium under both static and agitated cultures was compared. In the tea medium, the highest cellulose yield was obtained with green tea (~0.20 g/L) rather than black tea (~0.14 g/L). Yield in HS was higher (~0.28 g/L) but did not differ between static and agitated incubation. ¹H-NMR and ¹³C-NMR spectroscopy indicated that the cellulose is pure (free of acetan) and has high crystallinity, respectively. Cellulose yield was improved by changing the type and level of carbon and nitrogen source in the HS medium. A high yield of ~2.64 g/L was obtained with mannitol at 20 g/L and corn steep liquor at 40 g/L in combination. In the tea medium, tea at a level of 3 g/L gave the highest cellulose yield and the addition of 3 g/L of tea to the HS medium increased cellulose yield to 3.34 g/L. In conclusion, the G. xylinus strain from Kombucha had different cellulose-producing characteristics than previous strains isolated from fruit. Cellulose was produced in a pure form and showed high potential applicability. Our studies extensively characterized cellulose production from a G. xylinus strain from Kombucha for the first time, indicating both similarities and differences to strains from different sources.     

The surface structure of well-ordered native cellulose fibrils in contact with water

CP/MAS ¹³C NMR spectroscopy was used in combination with spectral fitting to examine the surface structure of hydrated cellulose I fibrils from Halocynthia and Gluconoacetobacter xylinus. To increase the spectral intensities and minimize signal overlap, G. xylinus celluloses site-specifically enriched in ¹³C either on C4 or on both C1 and C6 were examined. The experimental data showed multiple C4 and C6 signals for the water accessible fibril surfaces in the highly crystalline celluloses. These signal multiplicities were attributed to structural features in the surface layers induced by the fibril interior, and could not be extracted by spectral fitting in celluloses with a lower degree of crystallinity such as cellulose from cotton.     

Production of cellulose from glucose by Acetobacter xylinum

Acetobacter xylinum 1FO 13693 was selected as the best cellulose-producing bacterium among 41 strains belonging to the genus Acetobacter and Agrobacterium. Cellulose was found to be produced at the liquid surface in static liquid cultivation. The rate of cellulose production depended proportionally on the surface-area of the culture medium and was unaffected by the depth and volume of the medium. The optimum pH for cellulose production was 4.0 to 6.0. Glucose, fructose and glycerol were preferred carbon sources for cellulose production. The yield of cellulose, relative to the glucose consumed, decreased with an increase in initial glucose concentration, and gluconic acid accumulated at a high initial glucose concentration. The decrease in cellulose yield could be due to some glucose being metabolized to gluconic acid. However, the accumulated gluconic acid did not affect cellulose production. The culture conditions of the bacterium for cellulose production were optimized. The maximum production rate of cellulose was 36 g/d·m², with a yield of 100% for added glucose under the optimal conditions.     

Extraction of cellulose-synthesizing activity of Gluconacetobacter xylinus by alkylmaltoside

This study reinvestigated the synthesis of cellulose in vitro with a well-known cellulose-producing bacterium, Gluconacetobacter xylinus. Alkylmaltoside detergents, which are more frequently used in recent structural biological researches, are uniquely used in this study to solubilize cellulose-synthesizing activity from the cell membrane of G. xylinus. Activity comparable to that previously reported is obtained, while the synthesized cellulose is crystallized into a non-native polymorph of cellulose (cellulose II) as well as the previous studies. In spite of this failure to recover the native activity to synthesize cellulose I microfibril in vitro, the product is a polymer with a degree of polymerization greater than 45 as determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). It was thus concluded that the established protocol can solubilize cellulose-synthesizing activity of G. xylinus with polymerizing activity.     

Effective cellulose production by a coculture of Gluconacetobacter xylinus and Lactobacillus mali

A microbial colony that contained a marked amount of cellulose was isolated from vineyard soil. The colony was formed by the associated growth of two bacterial strains: a cellulose-producing acetic acid bacterium (st-60-12) and a lactic acid bacterium (st-20). The 16S rDNA-based taxonomy indicated that st-60-12 belonged to Gluconacetobacter xylinus and st-20 was closely related to Lactobacillus mali. Cocultivation of the two organisms in corn steep liquor/sucrose liquid medium resulted in a threefold higher cellulose yield when compared to the st-60-12 monoculture. A similar enhancement was observed in a coculture with various L. mali strains but not with other Lactobacillus spp. The enhancement of cellulose production was most remarkable when sucrose was supplied as the substrate. L. mali mutants for exocellular polysaccharide (EPS) production were defective in promoting cellulose production, but the addition of EPS to the monoculture of st-60-12 did not affect cellulose productivity. Scanning electron microscopic observation of the coculture revealed frequent association between the st-60-12 and L. mali cells. These results indicate that cell–cell interaction assisted by the EPS-producing L. mali promotes cellulose production in st-60-12.The nucleotide sequences of 16S rDNA that are reported in this paper were submitted to GenBank/EMBL/DDBJ under the accession numbers AB016864 (st-20) and AB016865 (st-60-12).     

Viability and cellulose synthesizing ability of Gluconacetobacter xylinus cells under high-hydrostatic pressure

The effect of pressure on viability and the synthesis of bacterial cellulose (BC) by Gluconacetobacter xylinus ATCC53582 were investigated. G. xylinus was statically cultivated in a pressurized vessel under 0.1, 30, 60, and 100 MPa at 25°C for 6 days. G. xylinus cells remained viable and retained cellulose producing ability under all the conditions tested, though the production of cellulose decreased with increasing the pressure. The BCs produced at each pressure condition were analyzed by field emission scanning electron microscopy (FE-SEM) and Fourier Transform Infrared (FT-IR). FE-SEM revealed that the widths of BC fibers produced under high pressure decreased as compared with those produced under the atmospheric pressure. By FT-IR, all the BCs were found to be of Cellulose type I, as the same as typical native cellulose. Our findings evidently showed that G. xylinus possessed a piezotolerant (barotolerant) feature adapting to 100 MPa without losing its BC producing ability. This was the first attempt in synthesizing BC with G. xylinus under elevated pressure of 100 MPa, which corresponded to the deep sea at 10,000 m.     

Surface area and porosity of acid hydrolyzed cellulose nanowhiskers and cellulose produced by Gluconacetobacter xylinus

The physical parameters of cellulose such as surface area and porosity are important in the development of cellulose composites which may contain valuable additives which bind to cellulose. In this area, the use of acid hydrolyzed nano-dimensional cellulose nanowhiskers (CNWs) has attracted significant interest, yet the surface area and porosity of these materials have not been explored experimentally. The objective of this work was to characterize the surface area and porosity of CNWs from different origins (plant cotton/bacterium Gluconacetobacter xylinus) and different acid treatments (H₂SO₄/HCl) by N₂ adsorption; as well as to compare surface area and porosity of bacterial cellulose synthesized by static and agitated cultures. Our results showed that CNWs produced from H₂SO₄/HCl exhibited significantly increased surface area and porosity relative to starting material cotton fiber CF11. Micropores were generated in HCl hydrolyzed CNWs but not in H₂SO₄ hydrolyzed CNWs. Bacterial CNWs exhibited larger surface area and porosity compared to plant CNWs. Cellulose synthesized by G. xylinus ATCC 700178 from agitated cultures also exhibited less surface area and porosity than those from static cultures.     

Oxygen Isotope Exchange between Metabolites and Water during Biochemical Reactions Leading to Cellulose Synthesis

Cellulose was produced heterotrophically from different carbon substrates by carrot tissue cultures and Acetobacter xylinum (a cellulose-producing bacterium) and by castor bean seeds germinated in the dark, in each case in the presence of water having known concentration of oxygen-18 (¹⁸O). We used the relationship between the amount of ¹⁸O in the water and in the cellulose that was synthesized to determine the number and ¹⁸O content of the substrate oxygens that exchanged with water during the reactions leading to cellulose synthesis. Our observations support the hypothesis that oxygen isotope ratios of plant cellulose are determined by isotopic exchange occurring during hydration of carbonyl groups of the intermediates of cellulose synthesis.     

Stable-Isotope Probing Identifies Uncultured Planctomycetes as Primary Degraders of a Complex Heteropolysaccharide in Soil

The exopolysaccharides (EPSs) produced by some bacteria are potential growth substrates for other bacteria in soil. We used stable-isotope probing (SIP) to identify aerobic soil bacteria that assimilated the cellulose produced by Gluconacetobacter xylinus or the EPS produced by Beijerinckia indica. The latter is a heteropolysaccharide comprised primarily of l-guluronic acid, d-glucose, and d-glycero-d-mannoheptose. ¹³C-labeled EPS and ¹³C-labeled cellulose were purified from bacterial cultures grown on [¹³C]glucose. Two soils were incubated with these substrates, and bacteria actively assimilating them were identified via pyrosequencing of 16S rRNA genes recovered from ¹³C-labeled DNA. Cellulose C was assimilated primarily by soil bacteria closely related (93 to 100% 16S rRNA gene sequence identities) to known cellulose-degrading bacteria. However, B. indica EPS was assimilated primarily by bacteria with low identities (80 to 95%) to known species, particularly by different members of the phylum Planctomycetes. In one incubation, members of the Planctomycetes made up >60% of all reads in the labeled DNA and were only distantly related (<85% identity) to any described species. Although it is impossible with SIP to completely distinguish primary polysaccharide hydrolyzers from bacteria growing on produced oligo- or monosaccharides, the predominance of Planctomycetes suggested that they were primary degraders of EPS. Other bacteria assimilating B. indica EPS included members of the Verrucomicrobia, candidate division OD1, and the Armatimonadetes. The results indicate that some uncultured bacteria in soils may be adapted to using complex heteropolysaccharides for growth and suggest that the use of these substrates may provide a means for culturing new species.     

Screening of the common culture conditions affecting crystallinity of bacterial cellulose

By analyzing with X-ray diffraction and FT-IR spectroscopy, the main effective factors among common culture conditions on crystallinity index and I _α fraction of cellulose produced by Gluconacetobacter xylinus were examined with Plackett–Burman design experiment. Varying pH value in the medium by adjusting the composition of citrate buffer or by adding HCl/NaOH solution indicates it is the content of citrate buffer rather than its function of pH buffering that gives the influence on crystallinity. Further experiment reveals that Na⁺ concentration of 0.174 mol/l in medium with citrate buffer added would decrease the crystallinity index significantly. Comparison of carbon sources shows that fructose leads to a higher crystallinity index than glucose, which suggests a relationship between crystallinity and production speed of bacterial cellulose affected by carbon sources. An interesting phenomenon was that a longer period of cultivation would decrease the crystallinity of bacterial cellulose. The reason is assumed to be the dense network of cellulose formed by bacterial cells that restrict the motion of themselves as the incubation period extends. Though the effect of inoculum age is still unclear, the influence on crystallinity of bacterial cellulose caused by variation of some ordinary culture conditions can be drawn out from data of this work.     

Enhancement of crystallinity of cellulose produced by <Emphasis Type="Italic">Escherichia coli</Emphasis> through heterologous expression of <Emphasis Type="Italic">bcsD</Emphasis> gene from <Emphasis Type="Italic">Gluconacetobacter xylinus</Emphasis>

Objectives

To evaluate the crystallinity index of the cellulose produced by Escherichia coli Nissle 1917 after heterologous expression of the cellulose synthase subunit D (bcsD) gene of Gluconacetobacter xylinus BPR2001.

Results

The bcsD gene of G. xylinus BPR2001 was expressed in E. coli and its protein product was visualized using SDS-PAGE. FTIR analysis showed that the crystallinity index of the cellulose produced by the recombinants was 0.84, which is 17% more than that of the wild type strain. The increased crystallinity index was also confirmed by X-ray diffraction analysis. The cellulose content was not changed significantly after over-expressing the bcsD.

Conclusion

The bcsD gene can improve the crystalline structure of the bacterial cellulose but there is not any significant difference between the amounts of cellulose produced by the recombinant and wild type E. coli Nissle 1917.

     

Adaptive mutation related to cellulose producibility in <Emphasis Type="Italic">Komagataeibacter medellinensis</Emphasis> (<Emphasis Type="Italic">Gluconacetobacter xylinus</Emphasis>) NBRC 3288

Gluconacetobacter xylinus (formerly Acetobacter xylinum and presently Komagataeibacter medellinensis) is known to produce cellulose as a stable pellicle. However, it is also well known to lose this ability very easily. We investigated the on and off mechanisms of cellulose producibility in two independent cellulose-producing strains, R1 and R2. Both these strains were isolated through a repetitive static culture of a non-cellulose-producing K. medellinensis NBRC 3288 parental strain. Two cellulose synthase operons, types I and II, of this strain are truncated by the frameshift mutation in the bcsBI gene and transposon insertion in the bcsCII gene, respectively. The draft genome sequencing of R1 and R2 strains revealed that in both strains the bcsBI gene was restored by deletion of a nucleotide in its C-rich region. This result suggests that the mutations in the bcsBI gene are responsible for the on and off mechanism of cellulose producibility. When we looked at the genomic DNA sequences of other Komagataeibacter species, several non-cellulose-producing strains were found to contain similar defects in the type I and/or type II cellulose synthase operons. Furthermore, the phylogenetic relationship among cellulose synthase genes conserved in other bacterial species was analyzed. We observed that the cellulose genes in the Komagataeibacter shared sequence similarities with the γ-proteobacterial species but not with the α-proteobacteria and that the type I and type II operons could be diverged from a same ancestor in Komagataeibacter.     

Illustration of the development of bacterial cellulose bundles/ribbons by Gluconacetobacter xylinus via atomic force microscopy

The development of bacterial cellulose (BC) fibrils biosynthesized by Gluconacetobacter xylinus was investigated using atomic force microscopy (AFM). After various incubation times at 30 °C, both the length of BC fibrils and their average diameters increased significantly. After the first 2-h incubation, not only single BC microfibrils with an average diameter of 5.8?±?0.7 nm were biosynthesized but single microfibrils also began to bind with each other forming bundles. After longer incubation times of 6 h, 16 h, and 48 h, only BC bundles and ribbons or even only ribbons were detectable. The development of BC fibrils and the formation of BC bundles/ribbons along with the biosynthesis time were illustrated using AFM. Furthermore, single BC fibrils were twisted in a right-handed manner. The twisting of BC fibrils possibly promoted the formation of bigger ribbons.     

Beneficial Effect of Acetic Acid on the Xylose Utilization and Bacterial Cellulose Production by Gluconacetobacter xylinus

In this work, acetic acid was found as one promising substrate to improve xylose utilization by Gluconacetobacter xylinus CH001. Also, with the help of adding acetic acid into medium, the bacterial cellulose (BC) production by G. xylinus was increased significantly. In the medium containing 3 g l⁻¹ acetic acid, the optimal xylose concentration for BC production was 20 g l⁻¹. In the medium containing 20 g l⁻¹ xylose, the xylose utilization and BC production by G. xylinus were stimulated by acetic acid within certain concentration. The highest BC yield (1.35 ± 0.06 g l⁻¹) was obtained in the medium containing 20 g l⁻¹ xylose and 3 g l⁻¹ acetic acid after 14 days. This value was 6.17-fold higher than the yield (0.21 ± 0.01 g l⁻¹) in the medium only containing 20 g l⁻¹ xylose. The results analyzed by FE-SEM, FTIR, and XRD showed that acetic acid affected little on the microscopic morphology and physicochemical characteristics of BC. Base on the phenomenon observed, lignocellulosic acid hydrolysates (xylose and acetic acid are main carbon sources present in it) could be considered as one potential substrate for BC production.     

Determination of live and dead Komagataeibacter xylinus cells and first attempt at precise control of inoculation in nanocellulose production

The timely enumeration of cells of nanocellulose-producing bacteria is challenging due to their unique growth properties. To better understand the metabolism of the bacteria and better control the concentration of living cells during cultivation, a prompt cell counting technology is crucial and urgently required. In this work, two fluorescent dyes, the asymmetrical anthocyanidin dye SYBR Green I (SG) and propidium iodide (PI), were first combined for Komagataeibacter xylinus species to determine live/dead bacterial cells quantitatively and promptly. The number of live and dead K. xylinus cells determined using an epifluorescence microscope corresponded well to the results obtained using a fluorescence microplate reader. The R² values were 0.9986 and 0.9920, respectively, and were similar to those obtained with the LIVE/DEAD^® BacLight^TM commercial kit. SG/PI double-staining showed proper efficiency in distinguishing live/dead cells for the K. xylinus strain (R² = 0.9898). The technology was applied to standardize four different K. xylinus strains, and the initial cell concentration of the strains was precisely controlled (no significant difference among the strains, P> 0.05). The cellulose yield per live cell was calculated, and significant differences (P < 0.05) were found among the four strains in the following order: DHU-ATCC-1> DHU-ZCY-1> DHU-ZGD-1> ATCC 23770. The study shows (i) the application of the SG/PI staining to standardizing inocula for bacterial cellulose production so that a more accurate comparison can be made between different strains, and (ii) the lower cost of using SG rather than the SYTO 9 of the commercially available LIVE/DEAD^® BacLight^TM kit.     

Roles of Cellulose and Xyloglucan in Determining the Mechanical Properties of Primary Plant Cell Walls

The primary cell walls of growing and fleshy plant tissue mostly share a common set of molecular components, cellulose, xyloglucan (XyG), and pectin, that are required for both inherent strength and the ability to respond to cell expansion during growth. To probe molecular mechanisms underlying material properties, cell walls and analog composites from Acetobacter xylinus have been measured under small deformation and uniaxial extension conditions as a function of molecular composition. Small deformation oscillatory rheology shows a common frequency response for homogenized native cell walls, their sequential extraction residues, and bacterial cellulose alone. This behavior is characteristic of structuring via entanglement of cellulosic rods and is more important than cross-linking with XyG in determining shear moduli. Compared with cellulose alone, composites with XyG have lower stiffness and greater extensibility in uniaxial tension, despite being highly cross-linked at the molecular level. It is proposed that this is due to domains of cross-linked cellulose behaving as mechanical elements, whereas cellulose alone behaves as a mat of individual fibrils. The implication from this work is that XyG/cellulose networks provide a balance of extensibility and strength required by primary cell walls, which is not achievable with cellulose alone.     

Biocompatibility evaluation of densified bacterial nanocellulose hydrogel as an implant material for auricular cartilage regeneration

Bacterial nanocellulose (BNC), synthesized by the bacterium Gluconacetobacter xylinus, is composed of highly hydrated fibrils (99 % water) with high mechanical strength. These exceptional material properties make BNC a novel biomaterial for many potential medical and tissue engineering applications. Recently, BNC with cellulose content of 15 % has been proposed as an implant material for auricular cartilage replacement, since it matches the mechanical requirements of human auricular cartilage. This study investigates the biocompatibility of BNC with increased cellulose content (17 %) to evaluate its response in vitro and in vivo. Cylindrical BNC structures (Ø48?×?20 mm) were produced, purified in a built-in house perfusion system, and compressed to increase the cellulose content in BNC hydrogels. The reduction of endotoxicity of the material was quantified by bacterial endotoxin analysis throughout the purification process. Afterward, the biocompatibility of the purified BNC hydrogels with cellulose content of 17 % was assessed in vitro and in vivo, according to standards set forth in ISO 10993. The endotoxin content in non-purified BNC (2,390 endotoxin units (EU)/ml) was reduced to 0.10 EU/ml after the purification process, level well below the endotoxin threshold set for medical devices. Furthermore, the biocompatibility tests demonstrated that densified BNC hydrogels are non-cytotoxic and cause a minimal foreign body response. In support with our previous findings, this study concludes that BNC with increased cellulose content of 17 % is a promising non-resorbable biomaterial for auricular cartilage tissue engineering, due to its similarity with auricular cartilage in terms of mechanical strength and host tissue response.     

Alternative Environmental Roles for Cellulose Produced by Acetobacter xylinum

The cellulose-producing bacterium Acetobacter xylinum has been considered a strict aerobe, and it has been suggested that the function of cellulose is to hold cells in an aerobic environment. In this study, we showed that A. xylinum is capable of growing microaerophilically. Cellulose pellicles provided significant protection to A. xylinum cells from the killing effects of UV light. In experiments measuring colonization by A. xylinum, molds, and other bacteria on pieces of apple, cellulose pellicles enhanced colonization of A. xylinum on the substrate and provided protection from competitors which use the same substrate as a source of nutrients. Cellulose pellicles produced by A. xylinum may have multiple functions in the growth and survival of the organism in nature.     

Gel-Electrophoretic Separation, Detection, and Characterization of Plant and Bacterial UDP-Glucose Glucosyltransferases

We have developed procedures for detection and characterization of UDP-glucose: glucosyltransferases following electrophoretic separation in nondenaturing polyacrylamide gels. Using digitonin-solubilized membrane protein preparations from a variety of plants and two cellulose-producing bacteria, activity can be demonstrated for several UDP-glucose:β-glucan synthases with an in situ assay following gel electrophoresis. These enzymes can be characterized within the gels with respect to effector requirements and products produced, and several advantages of this assay over solution assays are demonstrated. For example, the clear dependence of plant UDP-glucose:(1→3)-β-glucan synthase on both Ca²⁺ and a β-linked glucoside is shown; bacterial cellulose synthases show direct stimulation within the gel by guanyl oligonucleotide, and the Acetobacter xylinum enzyme appears more stable in the gel assay than in solution assay.     

Production of hydrogen from α-1,4- and β-1,4-linked saccharides by marine hyperthermophilic Archaea

Nineteen hyperthermophilic heterotrophs from deep-sea hydrothermal vents, plus the control organism Pyrococcus furiosus, were examined for their ability to grow and produce H₂ on maltose, cellobiose, and peptides and for the presence of the genes encoding proteins that hydrolyze starch and cellulose. All of the strains grew on these disaccharides and peptides and converted maltose and peptides to H₂ even when elemental sulfur was present as a terminal electron acceptor. Half of the strains had at least one gene for an extracellular starch hydrolase, but only P. furiosus had a gene for an extracellular β-1,4-endoglucanase. P. furiosus was serially adapted for growth on CF11 cellulose and H₂ production, which is the first reported instance of hyperthermophilic growth on cellulose, with a doubling time of 64 min. Cell-specific H₂ production rates were 29 fmol, 37 fmol, and 54 fmol of H₂ produced cell⁻¹ doubling⁻¹ on α-1,4-linked sugars, β-1,4-linked sugars, and peptides, respectively. The highest total community H₂ production rate came from growth on starch (2.6 mM H₂ produced h⁻¹). Hyperthermophilic heterotrophs may serve as an important alternate source of H₂ for hydrogenotrophic microorganisms in low-H₂ hydrothermal environments, and some are candidates for H₂ bioenergy production in bioreactors.