Conformational stability and activity of ribonuclease T1 and mutants. Gln25----Lys, Glu58----Ala, and the double mutant

Ribonuclease T1 (RNase T1) and mutants Gln25----Lys, Glu58----Ala, and the double mutant were prepared from a chemically synthesized gene, cloned and expressed in Escherichia coli. The wild-type RNase T1 prepared from the cloned gene was identical in every functional and physical property examined to RNase T1 prepared from Aspergillus oryzae. Urea and thermal unfolding experiments show that Gln25----Lys is 0.9 kcal/mol more stable and Glu58----Ala is 0.8 kcal/mol less stable than wild-type RNase T1. In the double mutant, these contributions cancel and the stability does not differ significantly from that of wild-type RNase T1. For the double mutant, the dependence of delta G on urea concentration is significantly greater than for wild-type RNase T1 or the single mutants. This suggests that the double mutant unfolds more completely in urea than the other proteins. The activity of Gln25----Lys is identical with that of wild-type RNase T1. The activities of Glu58----Ala and the double mutant are 7% of wild-type when GpC hydrolysis is measured (due to a 35-fold decrease in kcat), and 37% of wild-type when RNA hydrolysis is measured. Thus, Glu58 is important, but not essential to the activity of RNase T1.     

A revision and confirmation of the amino acid sequence of ribonuclease T1

The amino acid sequence of ribonuclease T1 was reinvestigated over the entire molecule by manual Edman degradation of performic acid-oxidized RNase T1 and some of its tryptic and chymotryptic peptides. The validity of the sequence was confirmed except for the sequence Pro-Gly-Ser at positions 71-73. This sequence should be revised to Gly-Ser-Pro.     

Predicting DNA-binding amino acid residues from electrostatic stabilization upon mutation to Asp/Glu and evolutionary conservation

Binding of polyanionic DNA depends on the cluster of electropositive atoms in the binding site of a DNA-binding protein. Such a cluster of electropositive protein atoms would be electrostatically unfavorable without stabilizing interactions from the respective electronegative DNA atoms and would likely be evolutionary conserved due to its critical biological role. Consequently, our strategy for predicting DNA-binding residues is based on detecting a cluster of evolutionary conserved surface residues that are electrostatically stabilized upon mutation to negatively charged Asp/Glu residues. The method requires as input the protein structure and sufficient sequence homologs to define each residue's relative conservation, and it yields as output experimentally testable residues that are predicted to bind DNA. By incorporating characteristic DNA-binding site features (i.e., electrostatic strain and amino acid conservation), the new method yields a prediction accuracy of 83%, which is much higher than methods based on only electrostatic strain (57%) or conservation alone (50%). It is also less sensitive to protein conformational changes upon DNA binding than methods that mainly depend on the 3D protein structure.     

Effect of leu-(Asp, Asn, Glu, Gln) dipeptides on platelet aggregation in vitro

A series of Leu-(Asp, Asn, Glu, Gln) dipeptides were synthesized and tested for their effect on human platelet aggregation in vitro induced by collagen, ADP, or adrenaline. It was found that only Leu-Asp-NH2 and Leu-Asn-NH2 inhibit rather strongly platelet aggregation, whereas a small inhibition was observed with Leu-Glu-NH2 and Leu-Gln-NH2, respectively.     

Quantitative analysis of the contribution of Glu46 and Asn98 to the guanosine specificity of ribonuclease T1

In the crystal structure of the ribonuclease T1 (RNase T1; EC 3.1.27.3)-2'-GMP complex the hydrogen-bonding potential of the guanine base is saturated [Arni, R., Heinemann, U., Tokuoka, R., & Saenger, W. (1988) J. Biol. Chem. 263, 15358-15368]. The oxygens of the Glu46 carboxylate and the Asn98 main-chain carbonyl act as hydrogen-bond acceptors for the N(1)H-C(2)-N(2)H2 part of the base. We measured the transesterification kinetics of wild-type and Glu46Ala RNase T1 using the GpU, IpU, and XpU series of analogous substrates. We found that the N(1)H---Glu46 O epsilon 1, the N(2)H---Glu46 O epsilon 2, and the N(2)H---Asn98 O hydrogen bonds have an apparent contribution of 2.7, 1.1, and 1.2 kcal/mol to the interaction energy of the enzyme and the transition state of the substrate. Wild-type RNase T1 discriminates guanine from nonionized xanthine (a guanine analogue in which the exocyclic amino group is replaced by an oxygen) by about 4.4 kcal/mol. Loss of the specific hydrogen bonds with the exocyclic amino group of the guanine base accounts for 2.4 kcal/mol of this discrimination energy; 2.0 kcal/mol is due to unfavorable non-H-bonded oxygen-oxygen contacts in the enzyme-xanthine complex. A pH dependence study shows that the deprotonated form of xanthine (i.e., the 6-keto-2-enolate anion; pKa = 5.4) is far less preferred, if not excluded, as substrate by wild-type RNase T1; this may be attributed to an electrostatic repulsion of the negatively charged xanthine by the Glu46 carboxylate group.     

Amino acid contribution to protein solubility: Asp, Glu, and Ser contribute more favorably than the other hydrophilic amino acids in RNase Sa

Poor protein solubility is a common problem in high-resolution structural studies, formulation of protein pharmaceuticals, and biochemical characterization of proteins. One popular strategy to improve protein solubility is to use site-directed mutagenesis to make hydrophobic to hydrophilic mutations on the protein surface. However, a systematic investigation of the relative contributions of all 20 amino acids to protein solubility has not been done. Here, 20 variants at the completely solvent-exposed position 76 of ribonuclease (RNase) Sa are made to compare the contributions of each amino acid. Stability measurements were also made for these variants, which occur at the i+1 position of a type II beta-turn. Solubility measurements in ammonium sulfate solutions were made at high positive net charge, low net charge, and high negative net charge. Surprisingly, there was a wide range of contributions to protein solubility even among the hydrophilic amino acids. The results suggest that aspartic acid, glutamic acid, and serine contribute significantly more favorably than the other hydrophilic amino acids especially at high net charge. Therefore, to increase protein solubility, asparagine, glutamine, or threonine should be replaced with aspartic acid, glutamic acid or serine.     

Contribution of histidine residues to the conformational stability of ribonuclease T1 and mutant Glu-58----Ala

The pK values of the histidine residues in ribonuclease T1 (RNase T1) are unusually high: 7.8 (His-92), 7.9 (His-40), and 7.3 (His-27) [Inagaki et al. (1981) J. Biochem. 89, 1185-1195]. In the RNase T1 mutant Glu-58----Ala, the first two pK values are reduced to 7.4 (His-92) and 7.1 (His-40). These lower pKs were expected since His-92 (5.5 A) and His-40 (3.7 A) are in close proximity to Glu-58 at the active site. The conformational stability of RNase T1 increases by over 4 kcal/mol between pH 9 and 5, and this can be entirely accounted for by the greater affinity for protons by the His residues in the folded protein (average pK = 7.6) than in the unfolded protein (pk approximately 6.6). Thus, almost half of the net conformational stability of RNase T1 results from a difference between the pK values of the histidine residues in the folded and unfolded conformations. In the Glu-58----Ala mutant, the increase in stability between pH 9 and 5 is halved (approximately 2 kcal/mol), as expected on the basis of the lower pK values for the His residues in the folded protein (average pK = 7.1). As a consequence, RNase T1 is more stable than the mutant below pH 7.5, and less stable above pH 7.5. These results emphasize the importance of measuring the conformational stability as a function of pH when comparing proteins differing in structure.     

The amino acid sequence of ribonuclease N1, a guanine-specific ribonuclease from the fungus Neurospora crassa

The complete amino acid sequence of ribonuclease N1 (RNase N1), a guanine-specific ribonuclease from a fungus, Neurospora crassa, was determined by conventional protein sequencing, using peptide fragments obtained by tryptic digestion of cyanogen bromide-treated RNase N1 and by Staphylococcus aureus V8 protease digestion of heat-denatured RNase N1. The results showed that the protein is composed of a single polypeptide chain of 104 amino acid residues cross-linked by two disulfide bonds and has a molecular weight of 11,174: (sequence; see text) (Disulfide bonds: C2-C10, C6-C103) The amino acid sequence was homologous with those of RNase T1 (65% identity) and related microbial RNases.     

The amino acid sequence of ribonuclease U1, a guanine-specific ribonuclease from the fungus Ustilago sphaerogena

The complete amino acid sequence of ribonuclease U1 (RNase U1), a guanine-specific ribonuclease from a fungus, Ustilago sphaerogena, was determined by conventional protein sequencing, using peptide fragments obtained by several enzymatic cleavages of the performic acid-oxidized protein. The oxidized protein was first cleaved by trypsin and the resulting peptides were purified and their amino acid sequences were determined. These tryptic peptides were aligned with the aid of overlapping peptides isolated from a chymotryptic digest of the oxidized protein. The amino acid sequence thus deduced was further confirmed by isolation and analysis of peptides obtained by digestion of the oxidized protein with lysyl endopeptidase. The location of the disulfide bonds was deduced by isolation and analysis of cystine-containing peptides from a chymotryptic digest of heat-denatured RNase U1. These results showed that the protein is composed of a single polypeptide chain of 105 amino acid residues cross-linked by two disulfide bonds, having a molecular weight of 11,235, and that the NH2-terminus is blocked by a pyroglutamate residue. It has an overall homology with other guanine-specific or related ribonucleases, and shows 48% identity with RNase T1 and 38% identity with RNase U2.     

Carboxymethylation of an active site glutamic acid residue of ribonuclease F1 iodoacetate

Ribonuclease (RNase) F1 was inactivated by incubation with an excess amount of iodoacetate at pH 5.5, 37 degrees C according to pseudo first-order kinetics. It was protected to various degrees, from inactivation by nucleotides, among which guanosine 2'-phosphate was most effective. The pseudo first-order rate constant was proportional to the reagent concentration, indicating that the reaction in reality follows second-order kinetics. The second-order rate constant was determined to be 25 x 10(-4) M-1 s-1. The inactivation rate was maximal at pH 5.5-6.0. When iodo[2-14C]acetate was used as the reagent, the stoichiometry of incorporation was determined to be 1.1 mol carboxymethyl group per mol of RNase F1 and glutamic acid residue 58 was assigned as the site of modification.     

How the extra methylene group affects the ligation properties of Glu vs. Asp and Gln vs. Asn amino acids: a DFT/PCM study

The p-xylylene monomers of parylene N, C and D have similar high polymerization reactivity. For effective copolymerization processes this fact is basically a drawback and for instance the copolymerization with styrene doesn’t go at all (Corley et al. J Pol Sc 13(68):137–156, [15]). Substitution of terminal hydrogen atoms by chlorine atoms reduces reactivity dramatically. 7,7,8,8-tetrachloro-p-xylylene and 2,5,7,7,8,8-hexachloro-p-xylylene can be isolated as yellow crystals. These crystals can be kept without any change in temperature below 0 ^∘C, but they polymerize slowly at room temperature. Perchloro-p-xylylene is stable even at elevated temperatures and does not polymerize under any conditions. Both 7,7,8,8-tetrachloro-p-xylylene and 2,5,7,7,8,8-hexachloro-p-xylylene copolymerize with various vinyl monomers, such as styrene and others. In this work the polymerization reactions of different chloro-derivatives of p-xylylene were modeled by means of the DFT method with hybrid correlation functionals (B3LYP and PBE0) and, for comparison, by means of the Hartree Fock methods. We inquired both initiation as well as elongation polymeric reactions for each of the reactants. We survied their reactivity analytically examining energetics and configurations in Szwarc-like process. The quantitative influence of chlorine atoms on the reactivity in polymerization steps, their location in the reactants’ structure (aromatic and/or aliphatic) as well as their number, were reviewed. The polymerizations of p-xylylenes with chlorine atoms as terminal aliphatic substituents yet revealed one more access path for parylenes’ in situ functionalization.