壳聚糖固定化纤维素酶的研究

以蟹壳为原料提取壳聚糖,用戊二醛作交联剂,将纤维素酶固定于壳聚糖上．同时探讨了一定量干壳聚糖载体与交联剂浓度、给酶量等关系的最适固定化酶条件,并对固定化酶的热稳定性、操作稳定性、米氏常数、最适温度、离子强度的影响及使用半衰期等理化性质进行了探讨．     

碱性磷酸酶在壳聚糖上的固定化作用

本文报道以蟹、虾废壳为原料提取壳聚糖,用戊二醛作交联剂,将碱性磷酸酶固定于壳聚糖上。同时探讨了一定量湿壳聚糖载体与交联剂浓度,给酶量及产率等关系的最适固定化酶条件,并对固定化酶的热稳定性、操作稳定性、米氏常数、最适pH、最适温度等理化性质进行了探讨。     

氨基末端磁性载体固定化中性蛋白酶的研究

以氨基末端磁微粒为载体,用戊二醛作交联剂,通过共价交联结合法固定化AS1.398中性蛋白酶.可以制备出活力达45 000 U/g磁性固定化酶.探讨了该载体对中性蛋白酶的最适固定化条件,并对磁性固定化酶的热稳定性,储存稳定性、操作稳定性等进行了研究,确定了此载体对酶的固载能力大于200 mg/g（载体）,及固定化磁性酶最适pH为7.5, 最适温度为60℃等催化特性.     

果胶酶固定化方法的研究

用海藻酸钠、二醋酸纤维、明胶分别作为固定化果胶酶的载体,研究比较载体的用量、交联剂的浓度、用酶量、制备的ｐＨ。结果表明,选择１５％浓度的明胶为载体,５％浓度的戊二醛为交联剂,用酶量５％,在ｐＨ３．５条件下制备固定化果胶酶,其酶活力回收率可达６７．７４％,重复回收使用１０次后,酶活力还可保留８０％以上,是果胶酶固定化的一种较好的方法。     

果胶酶固定化方法的研究

用海藻酸钠、二醋酸纤维、明胶分别作为固定化果胶酶的载体,研究比较载体的用量、交联剂的浓度、用酶量、制备的ｐＨ。结果表明,选择１５％浓度的明胶为载体,５％浓度的戊二醛为交联剂,用酶量５％,在ｐＨ３．５条件下制备固定化果胶酶,其酶活力回收率可达６７．７４％,重复回收使用１０次后,酶活力还可保留８０％以上,是果胶酶固定化的一种较好的方法。     

蔗糖酶和葡萄糖氧化酶的共固化

＃ 本文研究了用吸附交联技术共固定化蔗糖酶和葡萄糖氧化酶(GOD)的方法,考查了共固定化酶的动力学性质。试验结果表明:与溶液酶相比较,固定化蔗糖酶和GOD的响应滞迟期分别为3分钟和2分钟,稳态响应时间增加了6分钟和4分钟,Km值增大,pH—活力曲线变宽,最适pH值分别增大0.7和0.64,最适温度则降低7.3℃和16℃。 以活性氧化铝作载体,戊二醛作交联剂制备的共固定化蔗糖酶和GOD,其蛋白质固定化率为62.9％,分解葡萄糖的总速度为441.6IU,当蔗糖浓度为0.2％,以内时其反应速度与蔗糖的浓度呈正相关(r=0.996),使用半衰期1623次,在4℃下保存120天活力残存为83.7％。     

氨基载体共价结合固定化海洋假丝酵母脂肪酶

共价结合法是重要的工业酶固定化方法,利用稳定的共价键固定化工业酶,在载体和酶间形成多点共价连接,可以制备稳定性较好的固定化酶,更具有实际应用价值。利用氨基载体共价结合固定化海洋假丝酵母脂肪酶,采用较为廉价的戊二醛进行辅助交联,通过单因素和正交试验,确定最佳固定化条件为:25℃、pH5. 0、0. 1%戊二醛、0. 25g载体、交联0. 5h、固定化1h、加酶量为800U,最终得到的固定化酶酶活达到83. 01U/g。固定化脂肪酶的最适pH较游离酶向碱性方向偏移,最适反应温度提高10℃,固定化酶的热稳定性和酸碱稳定性比游离酶好且重复使用性和储存稳定性明显优于游离酶。同时发现交联剂是制备固定化脂肪酶的重要因素,因此探索新型交联剂对于固定化效果的提高具有重要意义,为海洋假丝酵母脂肪酶的固定化工艺技术和工业应用奠定了良好基础。     

壳聚糖固定化AS1．398中性蛋白酶稳定性的研究

对以壳聚糖为载体,由戊二醛作交联剂。制备的固定化ＡＳ１．３９８中性蛋白酶的稳定性进行了研究。实验结果表明,固定化ＡＳ１．３９８中性蛋白酶对热、乙醇、尿素以及ｐＨ值的稳定性均有明显的提高。     

胰蛋白酶的固定化及其性质研究

 以自制的脱乙酰壳多糖作载体,戊二醛为交联剂,对胰蛋白酶的固定化条件及其固定化酶的性质进行了研究。考查了交联剂的用量、pH值、以及载体与酶的比例等因素对胰蛋白酶固定化的影响。在所选择的固定化条件下,固定化酶的活性回收可达50％以上。同时研究了固定化胰蛋白酶的一些性质;最适温度60℃,最适PH8.0,Km值比可溶性酶升高,热稳定性、pH贮存稳定性以及在乙醇水溶液中的稳定性明显高于可溶性胰蛋白酶。在柱式反应器内,以2％酪蛋白为底物对,操作半衰期为40天。     

米曲霉F-81产中性蛋白酶的固定化条件及其特性

以海藻酸钠为载体,戊二醛为交联剂固定化米曲霉F-81产中性蛋白酶,研究了固定化条件及固定化酶的性质。结果表明,固定化的最佳条件为:固定化时间1 h、海澡酸钠浓度4%、戊二醛浓度9%、CaCl2浓度0.7 mol/L。在此条件下固定化的中性蛋白酶活力为游离酶活力的68%。固定化酶的最适作用温度为65℃,最适作用pH值为7.0。60℃下酶稳定性较好,80℃下处理60 min,粗酶中几乎检测不到酶活力;中性蛋白酶pH稳定范围为6.5-9.5。Km值为24.83 mg/mL,最大反应速率Vmax为0.043 12 mg/min。     

Immobilization of cellulolytic and hemicellulolytic enzymes on inorganic supports

Commercial cellulase preparations from Trichoderma viride and Aspergillus niger were immobilized on porous silica glass and ceramics such as alumina and titania with titanium tetrachloride (TiCl(4)) and on their silanized derivatives with glutaraldehyde (GLUT). The amounts of the immobilized enzymes were in the range 10-50 mg/g carrier (dry) depending on the kind of carrier and immobilization method. Their activities toward carboxymethyl cellulose (CMC), xylan, aryl-beta-glucoside, and aryl-beta-xyloside were 3-53% of those of the native enzymes. The optimum pH of the enzymes shifted to the acidic side in most cases, whereas the optimum temperatures were nearly the same as those of native ones. The activity of immobilized enzyme preparations towards CMC did not change significantly during continuous operation over a periods of 60 days. Finally, xylan was hydrolyzed with the immobilized enzymes, and the sugars formed were investigated.     

Comparative study of soluble and immobilized phenol oxidase from the fungus Mycelia sterilia IBR 35219/2

Phenol oxidase (EC 1.14.18.1) from the microscopic fungus Mycelia sterilia IBR 35219/2 was immobilized using glutaraldehyde on macroporous silica carriers. The enzyme immobilized on amino-Silochrome SKh-2 or aminopropyl-Silochrome 350/80 exhibited maximum activity. Soluble and immobilized phenol oxidases were compared. Compared to the soluble enzyme, the activity of which was optimum at pH 5.5, immobilized phenol oxidase exhibited optimum activity under slightly more acidic conditions (pH 5.2). Immobilization considerably increased the enzyme stability. Both soluble and immobilized forms of phenol oxidase from M. sterilia IBR 35219/2 catalyze oxidative conversion of phenolic compounds of the green tea extract.     

Soluble and immobilized phenol oxidase of the fungusMycelia sterilia IBR 35219/2: A comparative study

Phenol oxidase (EC 1.14.18.1) from the microscopic fungusMycelia sterilia IBR 35219/2 was immobilized using glutaraldehyde on macroporous silica carriers. The enzyme immobilized on amino-Silochrome SKh-2 or aminopropyl-Silochrome 350/80 exhibited maximum activity. Soluble and immobilized phenol oxidases were compared. Compared to the soluble enzyme, the activity of which was optimum at pH 5.5, immobilized phenol oxidase exhibited optimum activity under slightly more acidic conditions (pH 5.2). Immobilization considerably increased enzyme stability. Both soluble and immobilized forms of phenol oxidase fromM. sterilia IBR 35 219/2 catalyze oxidative conversion of phenolic compounds of green tea extract.     

Immobilization of Papain on the Mesoporous Molecular Sieve MCM‐48

The immobilization of papain on the mesoporous molecular sieve MCM‐48 (with a pore size of 6.2 nm in diameter) with the aid of glutaraldehyde, and the characteristics of this immobilized papain are described. The optimum conditions for immobilization were as follows: 20 mg native free enzyme/g of the MCM‐48 and 0.75 % glutaraldehyde, 2 h at 10–20 °C and pH 7.0. Under these optimum conditions for immobilization, the activity yield [%] of the immobilized enzyme was around 70 %. The influence of the pH on the activity of the immobilized enzyme was much lower compared to the free enzyme. The thermostability of the immobilized enzyme, whose half‐life was more than 2500 min, was greatly improved and was found to be significantly higher than that of the free enzyme (about 80 min). The immobilized enzyme also showed good operational stability, and the activity of the immobilized enzyme continued to maintain 76.5 % of the initial activity even after a 12‐day continuous operation. Moreover, the immobilized enzyme still exhibited good storage stability. From these results, papain immobilized on the MCM‐48 with the aid of glutaraldehyde, can be used as a high‐performance biocatalyst in biotechnological processing, in particular in industrial and medical applications.     

烟草多酚氧化酶的分离与固定化技术研究

多酚氧化酶属于氧化还原酶类,国际酶学委员会推荐名为儿茶酚氧化酶（ＥＣ１．１０．３．１ｐｏｌｙｐｈｅｎｏｌｏｘｉｄａｓｅ,ＰＰＯ）．该酶与食品工业、三废处理、医药卫生关系较为密切,因而研究较多．如近年来鸭梨［１］、蘑菇［２］、香蕉果肉组织［３］、荔枝果皮［４］等等中的多酚氧化酶均有研究报道．目前研究用固定化多酚氧化酶检测废水中酚类物质含量,进行环境检测;及其从工业废水中除去酚类,达到治理三废的目的．Ｍｏｓｂａｃｎ［５］（１９７６）研制成多酚氧化酶固定化酶柱,与氧电极检测器组合联用,可检测水中２０…     

Immobilization of Escherichia coli cells containing aspartase activity with kappa-carrageenan. Enzymic properties and application for L-aspartic acid production.

Whole cells of Escherichia coli having high aspartase (L-asparate ammonialyase, EC 4.3.1.1) activity were immobilized by entrapping into a kappa-carrageenan gel. The obtained immobilized cells were treated with glutaraldehyde or with glutaraldehyde and hexamethylenediamine. The enzymic properties of three immobilized cell preparations were investigated, and compared with those of the soluble aspartate. The optimum pH of the aspartase reaction was 9.0 for the three immobilized cell preparations and 9.5 for the soluble enzyme. The optimum temperature for three immobilized cell preparations was 5--10 degrees C higher than that for the soluble enzyme. The apparent Km values of immobilized cell preparations were about five times higher than that of the soluble enzyme. The heat stability of intact cells was increased by immobilization. The operational stability of the immobilized cell columns was higher at pH 8.5 than at optimum pH of the aspartase reaction. From the column effluents, L-aspartic acid was obtained in a good yield.     

吸附-交联法固定D-泛解酸内酯水解酶的研究

选择6种吸附树脂和离子交换树脂对D-泛解酸内酯水解酶进行固定化,筛选出了固定化效果较好的大孔弱碱性丙烯酸系阴离子交换树脂D-380为载体,用先吸附后交联的方法固定化。通过实验对固定化条件进行了优化,得出最佳的固定化条件为：加酶量6U／g树脂、吸附pH7．5、吸附时间4h、吸附温度30℃、交联剂戊二醛终浓度0．1％、交联时间2h。实验表明在此条件下制得的固定化酶有很好的稳定性：固定化酶在连续20次的底物水解反应后,剩余酶活达到71％。当温度达到80℃时游离酶几乎失去酶活,而固定化酶剩余酶活为60％以上。游离酶的pH稳定性范围为pH7～8,而固定化酶为pH6．5～8．5。     

Characterization of direct cellulase immobilization with superparamagnetic nanoparticles

Abstract

Methods of cellulase immobilization on magnetic particles via glutaraldehyde binding were studied. The binding was confirmed by transmission electronic microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM). Samples analyzed by TEM and XRD showed that the magnetic particles with or without bound cellulase were all nanosized particles with a mean diameter of 11.5 nm, and the binding process did not cause significant changes in particle size and structure. Analysis by FTIR showed that the binding of cellulase to the magnetic nanoparticles might be via covalent bonding between residual amine groups on Fe₃O₄ nanoparticles and amine groups of the cellulase. The VSM analysis showed that magnetic nanoparticles with or without bound cellulase were all superparamagnetic. The immobilized cellulase had a wider pH and temperature range and improved storage stability compared with the free enzyme. Determination of the Michaelis constants revealed that the immobilized cellulase had a greater affinity for the cellulosic substrate than the free enzyme. The immobilized cellulase showed better performance on hydrolysis of steam-exploded corn stalks than of bleached sulfite bagasse pulp.     

Immobilization of Aspergillus oryzae tannase and properties of the immobilized enzyme

Tannase enzyme from Aspergillus oryzae was immobilized on various carriers by different methods. The immobilized enzyme on chitosan with a bifunctional agent (glutaraldehyde) had the highest activity. The catalytic properties and stability of the immobilized tannase were compared with the corresponding free enzyme. The bound enzyme retained 20·3% of the original specific activity exhibited by the free enzyme. The optimum pH of the immobilized enzyme was shifted to a more acidic range compared with the free enzyme. The optimum temperature of the reaction was determined to be 40 °C for the free enzyme and 55 °C for the immobilized form. The stability at low pH, as well as thermal stability, were significantly improved by the immobilization process. The immobilized enzyme exhibited mass transfer limitation as reflected by a higher apparent K_m value and a lower energy of activation. The immobilized enzyme retained about 85% of the initial catalytic activity, even after being used 17 times.