A combinatorial role for exon, intron and splice site sequences in splicing in maize

Plant introns are typically AU-rich or U-rich, and this feature has been shown to be important for splicing. In maize, however, about 20% of the introns exceed 50% GC, and most of them are efficiently spliced. A series of constructs has been designed to analyze the cis requirements for splicing of the GC-rich Bz2 maize intron and two other GC-rich intron derivatives. By manipulating exon, intron and splice site sequences it is shown that exons can play an important role in intron definition: changes in exon sequences can increase splicing efficiency of a GC-rich intron from 17% to 86%. The relative difference, or base compositional contrast, in GC and U content between exon and intron sequences in the vicinity of splice sites, rather than the absolute base-content of the intron or exons, correlates with splicing efficiency. It is also shown that GC-rich intron constructs that are poorly spliced can be partially rescued by an improved 3' splice site.     

Requirements for mini-exon inclusion in potato invertase mRNAs provides evidence for exon-scanning interactions in plants

Invertases are responsible for the breakdown of sucrose to fructose and glucose. In all but one plant invertase gene, the second exon is only 9 nt in length and encodes three amino acids of a five-amino-acid sequence that is highly conserved in all invertases of plant origin. Sequences responsible for normal splicing (inclusion) of exon 2 have been investigated in vivo using the potato invertase, invGF gene. The upstream intron 1 is required for inclusion whereas the downstream intron 2 is not. Mutations within intron 1 have identified two sequence elements that are needed for inclusion: a putative branchpoint sequence and an adjacent U-rich region. Both are recognized plant intron splicing signals. The branchpoint sequence lies further upstream from the 3' splice site of intron 1 than is normally seen in plant introns. All dicotyledonous plant invertase genes contain this arrangement of sequence elements: a distal branchpoint sequence and adjacent, downstream U-rich region. Intron 1 sequences upstream of the branchpoint and sequences in exons 1, 2, or 3 do not determine inclusion, suggesting that intron or exon splicing enhancer elements seen in vertebrate mini-exon systems are absent. In addition, mutation of the 3' and 5' splice sites flanking the mini-exon cause skipping of the mini-exon, suggesting that both splice sites are required. The branchpoint/U-rich sequence is able to promote splicing of mini-exons of 6, 3, and 1 nt in length and of a chicken cTNT mini-exon of 6 nt. These sequence elements therefore act as a splicing enhancer and appear to function via interactions between factors bound at the branchpoint/U-rich region and at the 5' splice site of intron 2, activating removal of this intron followed by removal of intron 1. This first example of splicing of a plant mini-exon to be analyzed demonstrates that particular arrangement of standard plant intron splicing signals can drive constitutive splicing of a mini-exon.     

Dual functionality of a plant U-rich intronic sequence element

In potato invertase genes, the constitutively included, 9-nucleotide (nt)-long mini-exon requires a strong branchpoint and U-rich polypyrimidine tract for inclusion. The strength of these splicing signals was demonstrated by greatly enhanced splicing of a poorly spliced intron and by their ability to support splicing of an artificial mini-exon, following their introduction. Plant introns also require a second splicing signal, UA-rich intronic elements, for efficient intron splicing. Mutation of the branchpoint caused loss of mini-exon inclusion without loss of splicing enhancement, showing that the same U-rich sequence can function as either a polypyrimidine tract or a UA-rich intronic element. The distinction between the splicing signals depended on intron context (the presence or absence of an upstream, adjacent and functional branchpoint), and on the sequence context of the U-rich elements. Polypyrimidine tracts tolerated C residues while UA-rich intronic elements tolerated As. Thus, in plant introns, U-rich splicing elements can have dual roles as either a general plant U-rich splicing signal or a polypyrimidine tract. Finally, overexpression of two different U-rich binding proteins enhanced intron recognition significantly. These results highlight the importance of co-operation between splicing signals, the importance of other nucleotides within U-rich elements for optimal binding of competing splicing factors and effects on splicing efficiency of U-rich binding proteins.     

Characterization of intronic uridine-rich sequence elements acting as possible targets for nuclear proteins during pre-mRNA splicing in Nicotiana plumbaginifolia.

Introns of nuclear pre-mRNAs in dicotyledonous plants, unlike introns in vertebrates or yeast, are distinctly rich in A+U nucleotides and this feature is essential for their processing. In order to define more precisely sequence elements important for intron recognition in plants, we investigated the effects of short insertions, either U-rich or A-rich, on splicing of synthetic introns in transfected protoplast of Nicotiana plumbaginifolia. It was found that insertions of U-rich (sequence UUUUUAU) but not A-rich (AUAAAAA) segments can activate splicing of a GC-rich synthetic infron, and that U-rich segments, or multimers thereof, can function irrespective of the site of insertion within the intron. Insertions of multiple U-rich segments, either at the same or different locations, generally had an additive, stimulatory effect on splicing. Mutational analysis showed that replacement of one or two U residues in the UUUUUAU sequence with A or C residues had only a small effect on splicing, but replacement with G residues was strongly inhibitory. Proteins that interact with fragments of natural and synthetic pre-mRNAs in vitro were identified in nuclear extracts of N.plumbaginifolia by UV cross- linking. The profile of cross-linked plant proteins was considerably less complex than that obtained with a HeLa cell nuclear extract. Two major cross-linkable plant proteins had apparent molecular mass of 50 and 54 kDa and showed affinity for oligouridilates present in synGC introns or for poly(U).     

Different effects of intron nucleotide composition and secondary structure on pre-mRNA splicing in monocot and dicot plants.

We have found previously that the sequences important for recognition of pre-mRNA introns in dicot plants differ from those in the introns of vertebrates and yeast. Neither a conserved branch point nor a polypyrimidine tract, found in yeast and vertebrate introns respectively, are required. Instead, AU-rich sequences, a characteristic feature of dicot plant introns, are essential. Here we show that splicing in protoplasts of maize, a monocot, differs significantly from splicing in a dicot, Nicotiana plumbaginifolia. As in the case of dicots, a conserved branch point and a polypyrimidine tract are not required for intron processing in maize. However, unlike in dicots, AU-rich sequences are not essential, although their presence facilitates splicing if the splice site sequences are not optimal. The lack of an absolute requirement for AU-rich stretches in monocot introns in reflected in the occurrence of GC-rich introns in monocots but not in dicots. We also show that maize protoplasts are able to process a mammalian intron and short introns containing stem--loops, neither of which are spliced in N.plumbaginifolia protoplasts. The ability of maize, but not of N.plumbaginifolia to process stem--loop-containing or GC-rich introns suggests that one of the functions of AU-rich sequences during splicing of dicot plant pre-mRNAs may be to minimize secondary structure within the intron.     

Teleost introns are characterized by a high A+T content

We previously observed that Antarctic fish genes contain intron sequences of high A+T content (60-70% average A+T) which are in stark contrast with adjacent protein coding-sequences. Here, we report that this disparity in intron/exon base composition is a common feature among teleosts. We analyzed 483 teleost genomic DNA sequences, containing 2583 introns, from 80 teleost genera that populate polar, temperate, or tropical habitats. Eighty-nine percent of teleost introns display an A+T content between 50-84% A+T with a mean of 60% A+T. In contrast, only 37% of teleost exons have an A+T content greater-than 50% with a mean of 48% A+T. A comparison to homologous mammalian genes showed a striking difference; in this case, introns and exons have similar base compositions, averaging 45-47% A+T. This indicates that most teleost genes exhibit a large difference in base composition between their introns and exons. There was no correlation of teleost intron A+T content to intron length or habitat temperature range. Thus, teleost intron sequences tend to show the common feature of being much higher in A+T content then neighboring exons.     

In vivo analysis of intron processing using splicing-dependent reporter gene assays

The mechanisms of intron recognition and processing have been well-studied in mammals and yeast, but in plants the biochemistry of splicing is not known and the rules for intron recognition are not clearly defined. To increase understanding of intron processing in plants, we have constructed new pairs of vectors, pSuccess and pFail, to assess the efficiency of splicing in maize cultured cells. In the pFail series we use translation of pre-mRNA to monitor the amount of unspliced RNA. We inserted an ATG codon in the Bz2 (Bronze-2) intron in frame with luciferase: this construct will express luciferase activity only when splicing fails. In the pSuccess series the spliced message is monitored by inserting an ATG upstream of the Bz2 intron in frame with luciferase: this construct will express luciferase activity only when splicing succeeds. We show here, using both the wild-type Bz2 intron and the same intron with splice site mutations, that the efficiency of splicing can be estimated by the ratio between the luciferase activities of the vector pairs. We also show that mutations in the unique U-rich motif inside the intron can modulate splicing. In addition, a GC-rich insertion in the first exon increases the efficiency of splicing, suggesting that exons also play an important role in intron recognition and/or processing.     

Intron/exon structure of the chicken pyruvate kinase gene

The chicken pyruvate kinase gene is interrupted by at least ten introns, including nine introns within the coding region. We compare the structure of this gene with the three-dimensional protein structure of the homologous cat muscle enzyme. The introns are not randomly placed--they divide the coding sequence into fairly uniformly sized pieces encoding discrete elements of secondary structure. The introns tend to fall at interruptions between stretches of alpha-helix or beta-sheet residues, and each of the six exons that contribute to the barrel-shaped central domain include one or two repeats of a simple unit, an alpha-helix plus a beta strand. This structure suggests that introns were not inserted into a previously uninterrupted coding sequence, but instead are products of the evolution of the first pyruvate kinase gene. We have found some sequence homology between a segment of pyruvate kinase and the structurally homologous mononucleotide binding fold of alcohol dehydrogenase. The superposition of these two regions aligns an intron from the maize alcohol dehydrogenase gene four nucleotides from an intron in the chicken pyruvate kinase gene.     

Retention of spliceosomal components along ligated exons ensures efficient removal of multiple introns

The majority of mammalian pre-mRNAs contains multiple introns that are excised prior to export and translation. After intron excision, ligated exon intermediates participate in subsequent intron excisions. However, exon ligation generates an exon of increased size, a feature of pre-mRNA splicing that can interfere with downstream splicing events. These considerations raise the question of whether unique mechanisms exist that permit efficient removal of introns neighboring ligated exons. Kinetic analyses of multiple intron-containing pre-mRNAs revealed that splicing is more efficient following an initial intron removal event, suggesting that either the recruitment of the exon junction complex (EJC) to ligated exons increases the efficiency of multiple intron excisions or that the initial definition of splice sites is sufficient to permit efficient splicing of introns neighboring ligated exons. Knockdown experiments show that the deposition of the EJC does not affect subsequent splicing kinetics. Instead, spliceosomal components that are not involved in the initial splicing event remain associated with the pre-mRNA to ensure efficient removal of neighboring introns. Thus, ligated exons do not require redefinition, providing an additional kinetic advantage for exon defined splice sites.     

Distributions of exons and introns in the human genome

The human genome is revisited using exon and intron distribution profiles. The 26,564 annotated genes in the human genome (build October, 2003) contain 233,785 exons and 207,344 introns. On average, there are 8.8 exons and 7.8 introns per gene. About 80% of the exons on each chromosome are < 200 bp in length. < 0.01% of the introns are < 20 bp in length and < 10% of introns are more than 11,000 bp in length. These results suggest constraints on the splicing machinery to splice out very long or very short introns and provide insight to optimal intron length selection. Interestingly, the total length in introns and intergenic DNA on each chromosome is significantly correlated to the determined chromosome size with a coefficient of correlation r = 0.95 and r = 0.97, respectively. These results suggest their implication in genome design.     

Structural features of the maize sus1 gene and protein.

Genomic clones, cDNA clones, and protein of the maize (Zea mays L.) Suc synthase1 (sus1) gene were isolated and sequenced. Termini (5' and 3') of the transcribed unit were identified. The SUS1 protein was purified from tissue culture cells as a phosphorylated protein. The overall structure of sus1 is virtually identical with that of the paralogous gene, shrunken1 (sh1); however, the last intron of sh1 is missing in sus1. This intron bears much sequence similarity with the adjacent exon, suggesting that the intron arose from an internal duplication. Although the placement of the other 14 introns is identical in both genes, the introns exhibit markedly greater differences in size and sequence relative to that shown by the exons. An explanation for the differential rate of divergence of exons and introns is selection pressure for gene function. Additionally, comparisons of coding regions of plant sucrose synthases show that sh1-like and sus1-like genes can be found in all monocots so far analyzed. These latter observations point to an important role played by both genes in this group of plants.