Comparison of respiratory activity and culturability during monochloramine disinfection of binary population biofilms.

Biofilm bacteria challenged with monochloramine retained significant respiratory activity, even though they could not be cultured on agar plates. Microbial colony counts on agar media declined by approximately 99.9% after 1 h of disinfection, whereas the number of bacteria stained by a fluorescent redox dye experienced a 93% reduction. Integrated measures of biofilm respiratory activity, including net oxygen and glucose utilization rates, showed only a 10 to 15% reduction. In this biofilm system, measures of microbial respiratory activity and culturability yielded widely differing estimates of biocide efficacy.     

Observations on cyanobacterial population collapse in eutrophic lake water

In two laboratory-scale enclosures of water from the shallow, eutrophic Lake Loosdrecht (the Netherlands), the predominating filamentous cyanobacteria grew vigorously for 2 weeks, but then their populations simultaneously collapsed, whereas coccoid cyanobacteria and algae persisted . The collapse coincided with a short peak in the counts of virus-like particles. Transmission electron microscopy showed the morphotype Myoviridae phages, with isometric heads of about 90 nm outer diameter and >100-nm long tails, that occurred free, attached to and emerging from cyanobacterial cells. Also observed were other virus-like particles of various morphology. Similar mass mortality of the filamentous cyanobacteria occurred in later experiments, but not in Lake Loosdrecht. As applies to lakes in general, this lake exhibits high abundance of virus-like particles. The share and dynamics of infectious cyanophages remain to be established, and it is as yet unknown which factors primarily stabilize the host–cyanophage relationship. Observations on shallow, eutrophic lakes elsewhere indicate that the cyanophage control may also fail in natural water bodies exhibiting predominance of filamentous cyanobacteria. Rapid supply of nutrients appeared to be a common history of mass mortality of cyanobacteria and algae in laboratory and outdoor enclosures as well as in highly eutrophic lakes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Binary and mixed population biofilms: Time-lapse image analysis and disinfection with biocides

Simultaneous binary population biofilm formation by a bacterium and filamentous fungus was demonstrated by time-lapse image analysis in a flow cell system. The accumulation of attached bacterial cells followed an S-shaped graph similar to batch culture bacterial growth, with continual attachment, detachment, rotation, and movement of bacteria over the surface. An extensive hyphal network formed on the surface of the flow cell, protruding into the bulk flow, which subsequently detached. Multiple species mixed fungal–bacterial model biofilms were tested for isothiazolone biocide susceptibility. Biofilms were less susceptible to biocide treatment than planktonic cells of the same organisms. Mixed species biofilms, particularly for the bacterial species, offered greater protection against the action of the biocide compared to single species biofilms. Microbial loss as a result of biocide activity was shown by reduced cell surface coverage in electron micrographs. Received 11 March 2002/ Accepted in revised form 08 August 2002     

Survival of Rhizobium in monoculture and binary population with Rhizosphere bacteria

The survival of pure cultures of Rhizobium leguminosarum bv. pisum and Rhizobium trifolii and their interaction with associative diazotrophic and phosphate-mobilizing bacteria after inoculation of sterile soil were studied. The viable heterotypical diazotrophic and rhizobial phosphate-mobilizing association was shown to be formed whose efficiency was 14% (clover) and 28% (pea) higher compared to monorhizobial inoculates.     

Medical biofilms

For more than two decades, Biotechnology and Bioengineering has documented research focused on natural and engineered microbial biofilms within aquatic and subterranean ecosystems, wastewater and waste-gas treatment systems, marine vessels and structures, and industrial bioprocesses. Compared to suspended culture systems, intentionally engineered biofilms are heterogeneous reaction systems that can increase reactor productivity, system stability, and provide inherent cell:product separation. Unwanted biofilms can create enormous increases in fluid frictional resistances, unacceptable reductions in heat transfer efficiency, product contamination, enhanced material deterioration, and accelerated corrosion. Missing from B&B has been an equivalent research dialogue regarding the basic molecular microbiology, immunology, and biotechnological aspects of medical biofilms. Presented here are the current problems related to medical biofilms; current concepts of biofilm formation, persistence, and interactions with the host immune system; and emerging technologies for controlling medical biofilms.     

Candida biofilms

In response to attachment to a surface, fungal cells produce biofilms, three-dimensional structures composed of cells surrounded by exopolymeric matrices. Surface attachment causes Candida albicans cells to enter a special physiological state in which they are highly resistant to antifungal drugs and express the drug efflux determinants CDR1, CDR2 and MDR1. C. albicans biofilms produced under different conditions differ in their cellular morphology and matrix content, which suggests that biofilms formed within a host, for example on indwelling medical devices, would also differ depending on the nature of the device and its location. The mechanisms by which surface attachment leads to biofilm formation are presently not understood.     

Combating biofilms

Biofilms are complex microbial communities consisting of microcolonies embedded in a matrix of self-produced polymer substances. Biofilm cells show much greater resistance to environmental challenges including antimicrobial agents than their free-living counterparts. The biofilm mode of life is believed to significantly contribute to successful microbial survival in hostile environments. Conventional treatment, disinfection and cleaning strategies do not proficiently deal with biofilm-related problems, such as persistent infections and contamination of food production facilities. In this review, strategies to control biofilms are discussed, including those of inhibition of microbial attachment, interference of biofilm structure development and differentiation, killing of biofilm cells and induction of biofilm dispersion.     

Modelling of biofilms

A mixed-culture biofilm (MCB) model is available which describes the progression of biofilm thickness and the spatial distribution and development in time of dissolved and paniculate components in the biofilm. The MCB model is able to predict the physico-chemical conditions at the interface between the biofilm and the solid surface, on which the biofilm grows, as a function of the conditions in the bulk fluid, the microbial composition of the biofilm, and the transport and transformation processes which take place in the biofilm. The mass balance equations of the MCB model are generally valid and can be applied to almost any microbial system if its kinetics and stoichiometry can be provided. AQUASIM is a new computer program for the identification and simulation of aquatic systems. The program solves the equations of the MCB model. It has a window-type user interface and includes routines for simulation, sensitivity analysis, automatic parameter estimation and data fitting. The MCB model has been developed and is primarily used in the field of waste water treatment. However, under certain conditions and with some additional simplifications this model can also be used for the investigation of biofouling and biocorrosion problems. The possibilities and limitations of the application of the MCB model and of AQUASIM to this type of problem are briefly discussed.     

Antibiotic resistance of biofilms

Microbial biofilms are notably recalcitrant towards treatment with antibiotics, biocides or disinfectants that would adequately control the same organisms growing in planktonic mode. Much of this resistance has been attributed to an organisation of the biofilm cells within exopolymer matrices. Whilst such exopolymers are unlikely to hinder the diffusion and access of antimicrobial agents to the underlying cells, they will chemically quench reactive biocides such as chlorine and peroxygens, and bind highly charged antibiotics, such as tobramycin and gentamycin, thereby providing some protection to the more deep lying cells. Extracellular enzymes, bound within the glycocalyx and able to degrade the treatment agents, will further reduce the access of susceptible compounds. Diffusion limitation however, is unlikely to be the sole moderator of the resistance properties of microbial biofilms. In addition, gradients of oxygen and nutrients established across the biofilm community will cause growth rates to be much reduced at points remoted from the accessible nutrient. Slow growth rates, and the associated induction of stringent responses further contribute towards this resistance. Finally, there have been recent demonstrations that attachment of microorganisms to surfaces promotes the expression of genes that are not normally expressed in planktonic culture. Whether or not the expression of such genes alters the phenotype in a manner which alters the response of the cells to antimicrobial agents remains to be demonstrated.     

Heterogeneity in biofilms

Biofilms, accumulations of microorganisms at interfaces, have been described for every aqueous system supporting life. The structure of these microbial communities ranges from monolayers of scattered single cells to thick, mucous structures of macroscopic dimensions (microbial mats; algal-microbial associations; trickling filter biofilms). During recent years the structure of biofilms from many different environments has been documented and evaluated by use of a broad variety of microscopic, physico-chemical and molecular biological techniques, revealing a generally complex 3D structure. Parallel to these investigations more and more complex mathematical models and simulations were developed to explain the development, structures, and interactions of biofilms. The forces determining the spatial structure of biofilms, including microcolonies, extracellular polymeric substances (EPS), and channels, are still the subject of controversy. To achieve conclusive explanations for the structures observed in biofilms the cooperation of both fields of investigation, modelling and experimental research, is necessary. The expanding field of molecular techniques not only allows more and more detailed documentation of the spatial distribution of species, but also of functional activities of single cells in their biofilm environment. These new methods will certainly reveal new insights in the mechanisms involved in the developmental processes involved in the formation and behavior of biofilms.     

The sociobiology of biofilms

Biofilms are densely packed communities of microbial cells that grow on surfaces and surround themselves with secreted polymers. Many bacterial species form biofilms, and their study has revealed them to be complex and diverse. The structural and physiological complexity of biofilms has led to the idea that they are coordinated and cooperative groups, analogous to multicellular organisms. We evaluate this idea by addressing the findings of microbiologists from the perspective of sociobiology, including theories of collective behavior (self-organization) and social evolution. This yields two main conclusions. First, the appearance of organization in biofilms can emerge without active coordination. That is, biofilm properties such as phenotypic differentiation, species stratification and channel formation do not necessarily require that cells communicate with one another using specialized signaling molecules. Second, while local cooperation among bacteria may often occur, the evolution of cooperation among all cells is unlikely for most biofilms. Strong conflict can arise among multiple species and strains in a biofilm, and spontaneous mutation can generate conflict even within biofilms initiated by genetically identical cells. Biofilms will typically result from a balance between competition and cooperation, and we argue that understanding this balance is central to building a complete and predictive model of biofilm formation.     

Biocide treatment of biofilms

Biofilms are ubiquitous in nature and microorganisms often exist as members of complex consortia, rather than as pure cultures. Their localised metabolic activity can create diffusion gradients of nutrients, fermentation byproducts and possible associated corrosion products within the biofilms; together with cell lysis, these cause a mosaic of microenvironments which may be totally different to the bathing phase. Such habitats pose a major, and often ignored, constraint on the interpretation of results obtained from laboratory disinfection models which can be physically, environmentally and physiologically inappropriate. For example, the most commonly used model for inactivation of microorganisms by biocides utilises the so-called ‘Chick- Watson law’: this implies that biocide concentration and contact time, the (C × T) factor, are the two key variables determining biocide efficacy. However, applications of the ‘law’ have assumed complete and uniform mixing of microorganisms and biocide, ignoring that diffusion might be rate limiting and that biocide concentration might decrease with time. Recent results suggest that many of the viable bacteria in chlorinated potable water are attached to surfaces and under these circumstances coliforms have withstood at least 12 ppm free residual chlorine. The use and efficacy of alternative biocides such as monochloramine against aquatic biofilms is discussed.