Numerical and experimental dosimetry of petri dish exposure setups

Crawford TEM cells are often used to expose cell cultures or small animals in order to study the effects caused by high-frequency fields. They are self-contained, easy-to-use setups that provide a rather homogeneous field distribution in a large area around its center, corresponding approximately to far-field conditions. However, a number of conditions must be met if such TEM cells are intended to be used for in vitro experiments. For instance, poor interaction with the incident field must be maintained to avoid significant field disturbances in the TEM cell. This is best achieved with E-polarization, i.e., when the E-field vector is normal to the investigated cell layer lining the bottom of a synthetic Petri dish. In addition, E-polarization provides the most homogeneous field distribution of all polarizations within the entire layer of cells. In this paper, we present a detailed dosimetric assessment for 60 and 100 mm Petri dishes as well as for a 48-well titer plate at 835 MHz. The dosimetry was performed by using numerical computations. The modeling and the simplifications are validated by a second numerical technique and by experimental measurements. For thin liquid layers, an approximation formula is provided with which the induced field strength for many other experiments conducted in Petri dishes can be assessed reliably. © 1996 Wiley-Liss, Inc.     

Numerical modeling and dosimetry of the 35 mm Petri dish under 46 GHz millimeter wave exposure

Experimental studies on effects of millimeter wave (MMW) exposure on cells cultured in Petri dishes have attracted interest in recent decades. To improve the quantification of the biological responses toward the MMW energy, an accurate and precise MMW dosimetry is to be provided. By using the finite difference time domain (FDTD) method, the numerical dosimetry is performed for a typical 35 mm Petri dish under 46 GHz continuous MMW exposure from an irradiator of a specified power pattern. With the aim of building a precise model, the meniscus at the interface between the culture solution and the Petri dish sidewall is taken into account, followed by the modeling of smooth edges of the Petri dish. The trilinear interpolation is introduced to assist the FDTD method to obtain a more precise dosimetric assessment. The specific absorption rate (SAR) distributions in the cornea cells covered by culture solution in the Petri dish are calculated and compared to display the effects of using Petri dish models of various precision and the trilinear interpolation on dosimetry results. In addition, the SAR distribution in the cells is analyzed to study its homogeneity. The results indicate that the precise Petri dish model and the application of the trilinear interpolation are helpful in improving the precision of numerical dosimetry. It is also revealed that the inhomogeneity of the SAR distribution is well beyond neglect, which deserves cautious consideration in experiments investigating MMW effects on cells in vitro.     

Proposal of 28 GHz In Vitro Exposure System Based on Field Uniformity for Three‐Dimensional Cell Culture Experiments

This paper proposes a novel in vitro exposure system operating at millimeter‐wave (mmWave) 28 GHz, one of the frequency bands under consideration for fifth generation (5G) communication. We employed the field uniformity concept along cross‐sectional observation planes at shorter distances from the radiation antenna for better efficiency and a small‐size system. A choke‐ring antenna was designed for this purpose in consideration of a wider beamwidth (BW) and a symmetric far‐field pattern across three principal planes. The permittivity of Dulbecco's modified Eagle's medium solution was measured to examine the specific absorption rate (SAR) of the skin cell layer inside a Petri dish model for a three‐dimensional (3D) cell culture in vitro experiment. The best deployment of Petri dishes, taking into account a geometrical field symmetry, was proposed. Local SAR values within the cell layer among the Petri dishes were determined with different polarization angles. It was determined that this polarization effect should be considered when the actual exposure and deployment were conducted. We finally proposed an in vitro exposure system based on the field uniformity including downward exposure from an antenna for 3D cell culture experiments. A small‐size chamber system was obtained, and the size was estimated using the planar near‐field chamber design rule. Bioelectromagnetics. 2019;40:445–457. © 2019 Bioelectromagnetics Society     

Cylindrical waveguide applicator for in vitro exposure of cell culture samples to 1.9-GHz radiofrequency fields

An applicator for in vitro cell culture exposure was developed based on a circularly polarized, cylindrical waveguide for the 1.9-GHz frequency band used by Personal Communications Services (PCS) in Canada. The applicator consists of two coaxial Petri dishes that sit on the open end of the cylindrical waveguide. The inner 60-mm Petri dish contains the cell culture while the outer 150-mm dish contains coolant water, which is circulated from a pump. A dosimetric evaluation was made using thermometric and E-field probe techniques. The latter allowed the entire inner dish to be scanned to determine the range of specific absorption rates (SARs) pertinent to the expected position of the cells. A representative SAR rate (SAR per unit of input power) of 8.6 +/- 2.1 W/kg/W (95th percentile) was determined 1 mm from the bottom, for a 10 ml sample volume of standard medium. Evaluation of the cooling system demonstrated that following an initial 0.3 degrees C temperature increase, a constant temperature was maintained for 24 h when the waveguide was energized to achieve an average sample SAR of 10 W/kg. These properties enable both acute and sub-acute in vitro bio-effect studies to be performed on a variety of cell culture samples.     

Design and Dosimetric Characterization of a Broadband Exposure Facility for In Vitro Experiments in the Frequency Range 18–40.5 GHz

A novel exposure facility for exposing cell monolayers to centimeter and millimeter waves (18–40.5 GHz) used by future 5G mobile communication technology and similar applications has been developed. A detailed dosimetric characterization of the apparatus for frequencies of 27 and 40.5 GHz and 60 mm petri dishes, used in a presently ongoing study on human dermal fibroblasts and keratinocytes, was carried out. The exposure facility enables a well-defined, randomized, and blinded application of sham exposure and exposure with selectable values of incident power flux density, and additionally provides the possibility of continuous monitoring of the sample temperature during exposure while it does not require significant deviations from routine in vitro handling procedures, i.e. petri dishes are not required to be placed inside waveguides or TEM cells. Mean specific absorption rate (SAR) values inside the cell monolayer of 115 W/kg (27 GHz) and 160 W/kg (40.5 GHz) per watt antenna input power and corresponding transmitted power density (S_t) values at the bottom of the cell monolayer of 65 W/m² (27 GHz) and 70 W/m² (40.5 GHz) per watt antenna input power can be achieved, respectively. For reasonable amounts of harvested cells (80% of petri dish bottom area), the variation (max/min) of SAR and S_t over the cell monolayer remains below 3.7 dB (27 GHz) and 3.0 dB (40.5 GHz), respectively. © 2021 Bioelectromagnetics Society.     

Large scale in vitro experiment system for 2 GHz exposure

A beam formed radiofrequency (RF) exposure-incubator employing a horn antenna, a dielectric lens, and a culture case in an anechoic chamber is developed for large scale in vitro studies. The combination of an open type RF exposure source and a culture case through which RF is transmitted realizes a uniform electric field (+/-1.5 dB) in a 300 x 300 mm area that accommodates 49 35 mm diameter culture dishes. This large culture dish area enables simultaneous RF exposure of a large number of cells or various cell lines. The RF exposure source operates at 2142.5 MHz corresponding to the middle frequency of the downlink band of the International Mobile Telecommunication 2000 (IMT-2000) cellular system. The dielectric lens, which has a gain of 7 dB, focuses RF energy in the direction of the culture case and provides a uniform electric field. The culture case is sealed and connected to the main unit for environmental control, located outside the anechoic chamber, via ducts. The temperature at the center of the tray, which contains the culture dishes in the culture room, is maintained at 37.0 +/- 0.2 degrees C by air circulation. In addition, the appropriate CO2 density and humidity supplied to the culture case realizes stable long-term culture conditions. Specific absorption rate (SAR) dosimetry is performed using an electric field measurement technique and the Finite Difference Time Domain (FDTD) calculation method. The results indicate that the mean SAR of the culture fluid at the bottom of the 49 (7 x 7 array) culture dishes used in the in vitro experiments is 0.175 W/kg for an antenna input power of 1 W and the standard deviation of the SAR distribution is 59%. When only 25 culture dishes (5 x 5 array) are evaluated, the mean SAR is 0.139 W/kg for the same antenna input power and the standard deviation of the SAR distribution is 47%. The proliferation of the H4 cell line in 72 h in a pair of RF exposure-incubators reveals that the culture conditions are equivalent to those of a common CO2 incubator.     

Dosimetric assessment of an exposure system for simulating GSM and WCDMA mobile phone usage

An exposure system for investigation of volunteers during simulated GSM and WCDMA mobile phone usage has been designed. The apparatus consists of a dual band antenna with enhanced carrying properties that enables exposure for at least 8 h a day. For GSM a 900 MHz pulse modulated carrier was used. The QPSK modulated WCDMA signal at 1966 MHz comprises a power control scheme, which was designed for investigations of biological effects. The dosimetry of the exposure system by measurements and calculations is described in detail within this paper. It is shown that the SAR distribution of the antenna shows similar characteristics to mobile phones with an integrated antenna. The 10 g averaged localized SAR, normalized to an antenna input power of 1 W and measured in the flat phantom area of the SAM phantom, amounts to 7.82 mW/g (900 MHz) and 10.98 mW/g (1966 MHz). The simulated SAR(10 g) in the Visible Human head model agrees with measured values to within 20%. A variation of the antenna rotation angle results in an SAR(10 g) change below 17%. The increase of the antenna distance by 2 mm with respect to the human head leads to an SAR(10 g) change of 9%.     

Effect of the meniscus at the solid/liquid interface on the SAR distribution in Petri dishes and flasks

Several authors have reported that the meniscus as occurring at the walls of Petri dishes and flasks (solid-liquid interface) can significantly affect the SAR distribution in the entire dish and flask, while others have ignored this effect. In this study, this effect has been comprehensively analyzed by numerical means supported by theoretical considerations. The focus is on E polarization, which results in the most homogeneous exposure for monolayer cell cultures and therefore is the most often applied polarization in exposure setups for risk assessment studies. This includes setups based on TEM cells, waveguides, radial transmission lines (RTL), and HF chambers. The conclusion of this study is that the meniscus and its size have a significant effect on the strength and homogeneity of the induced SAR distribution. Hence, the meniscus needs to be accounted for in the determination of the averaged SAR as well as in the uncertainty assessment. It has also been demonstrated that a voxel size of less than 0.2 mm is needed to predict the SAR values for a monolayer of cells accurately.     

Basis for optimization of in vitro exposure apparatus for health hazard evaluations of mobile communications.

The main objective of this paper is to carefully study the fields induced in flasks exposed to RF electromagnetic fields. The study focuses on the widely used 60 mm Petri dishes and rectangular T-75 flasks for the two following cases: 1) cells in homogeneous suspension and 2) cell monolayers. The dependence of the coupling and the homogeneity of the SAR distribution on frequency (0.7 GHz to 2.5 GHz), polarization (E, H and k polarizations) and the amount of medium (1.9 mm to 4.7 mm medium height) is studied. In addition, the effects of the environment, meniscus and field impedance as well as the distortion of the incident field are discussed. Based on these results, advantages and disadvantages of different fundamental designs of apparatus used in the past are compared. These are TEM cells, HF chambers, radial transmission lines (RTL), waveguides and wire patch cells. Furthermore, the major optimization parameters are identified for the development of highly optimized exposure systems, enabling the conduct of high quality experiments.     

SAR and efficiency evaluation of a 900 MHz waveguide chamber for cell exposure

In this work we present the results of numerical and experimental dosimetry carried out for an in vitro exposure device to irradiate sample groups at 900 MHz. The cells are kept in 8 and 15 ml cell cultures, contained, respectively in T25 and T75 rectangular flasks. The dosimetric assessment of the distribution of the specific absorption rate (SAR) is performed for both the bottom of the flask and the whole volume of the sample to provide results for experiments on either the cell layer or the cell suspension. The irradiating chamber is a rectangular waveguide (WG). Different configurations are considered to assess the optimum orientation and positioning of the cell cultures inside the WG. The system performance is optimal when the electric field is parallel to the sample and the WG is terminated by a matched load. In this condition two 15 or four 8 ml cells cultures can be exposed. The efficiency (ratio between the power absorbed by the sample and the incident power) and the non-uniformity degree (ratio between the standard deviation of SAR values and the average SAR over the sample) are calculated and successfully verified through measurements of the scattering parameters and local temperature increases. In the chosen exposure configuration, the efficiency is 0.40 and the non-uniformity degree is 39% for the 15 ml samples. For the 8 ml samples, the efficiency is 0.19 and a low non-uniformity degree (15%) is found.     

A simple method for reducing moisture condensation on Petri dish lids

Condensation on the lids of Petri dishes, used to culture plant tissues, can often obscure the view of the contents of the dish and interfere with data collection. Under the high humidity conditions that exist in the culture container, a small temperature drop causes water to condense on the inside lid and sides of the container. Mild condensation causes “fogging” while continual or repeated rounds of condensation result in the formation of water droplets. To control condensation in the standard plant tissue culture Petri dish, a simple method was developed whereby the lid of the culture dish was modified, to buffer the lid from temperature fluctuations. Polymer discs, which were the same diameter as the Petri dish lid, were either placed on the top of the lids of existing dishes or surface-sterilized and used in place of the lid. Polymer discs of varying thicknesses and type, and possessing different thermal conductivities, were evaluated for their abilities to reduce the rate of condensation formation. Petri dishes with modified lids were placed under reduced temperature conditions. Condensation, forming on the lids of the dishes was quantified over time using image analysis. Gray value determinations indicated that the thicker polymer discs with the lowest thermal conductivities provided the best protection against condensation. Placement of polymer discs on the top of Petri dishes is a relatively simple method that can be used to buffer the lid from small temperature changes and minimize condensation problems.     

Determination of safety distance limits for a human near a cellular base station antenna,adopting the IEEE standard or ICNIRP guidelines

This paper investigates the minimum distance for a human body in the near field of a cellular telephone base station antenna for which there is compliance with the IEEE or ICNIRP threshold values for radio frequency electromagnetic energy absorption in the human body. First, local maximum specific absorption rates (SARs), measured and averaged over volumes equivalent to 1 and to 10 g tissue within the trunk region of a physical, liquid filled shell phantom facing and irradiated by a typical GSM 900 base station antenna, were compared to corresponding calculated SAR values. The calculation used a homogeneous Visible Human body model in front of a simulated base station antenna of the same type. Both real and simulated base station antennas operated at 935 MHz. Antenna-body distances were between 1 and 65 cm. The agreement between measurements and calculations was excellent. This gave confidence in the subsequent calculated SAR values for the heterogeneous Visible Human model, for which each tissue was assigned the currently accepted values for permittivity and conductivity at 935 MHz. Calculated SAR values within the trunk of the body were found to be about double those for the homogeneous case. When the IEEE standard and the ICNIRP guidelines are both to be complied with, the local SAR averaged over 1 g tissue was found to be the determining parameter. Emitted power values from the antenna that produced the maximum SAR value over 1 g specified in the IEEE standard at the base station are less than those needed to reach the ICNIRP threshold specified for the local SAR averaged over 10 g. For the GSM base station antenna investigated here operating at 935 MHz with 40 W emitted power, the model indicates that the human body should not be closer to the antenna than 18 cm for controlled environment exposure, or about 95 cm for uncontrolled environment exposure. These safe distance limits are for SARs averaged over 1 g tissue. The corresponding safety distance limits under the ICNIRP guidelines for SAR taken over 10 g tissue are 5 cm for occupational exposure and about 75 cm for general-public exposure.     

Exposure assessment in front of a multi-band base station antenna

This study investigates occupational exposure to electromagnetic fields in front of a multi‐band base station antenna for mobile communications at 900, 1800, and 2100 MHz. Finite‐difference time‐domain method was used to first validate the antenna model against measurement results published in the literature and then investigate the specific absorption rate (SAR) in two heterogeneous, anatomically correct human models (Virtual Family male and female) at distances from 10 to 1000 mm. Special attention was given to simultaneous exposure to fields of three different frequencies, their interaction and the additivity of SAR resulting from each frequency. The results show that the highest frequency—2100 MHz—results in the highest spatial‐peak SAR averaged over 10 g of tissue, while the whole‐body SAR is similar at all three frequencies. At distances >200 mm from the antenna, the whole‐body SAR is a more limiting factor for compliance to exposure guidelines, while at shorter distances the spatial‐peak SAR may be more limiting. For the evaluation of combined exposure, a simple summation of spatial‐peak SAR maxima at each frequency gives a good estimation for combined exposure, which was also found to depend on the distribution of transmitting power between the different frequency bands. Bioelectromagnetics 32:234–242, 2011. © 2010 Wiley‐Liss, Inc.     

Immunotropic influence of 900 MHz microwave GSM signal on human blood immune cells activated in vitro

In an earlier study we reported that G(o) phase peripheral blood mononulclear cells (PBMC) exposed to low-level (SAR = 0.18 W/kg) pulse-modulated 1300 MHz microwaves and subsequently cultured, demonstrate changed immune activity (Dabrowski et al., 2003). We investigated whether cultured immune cells induced into the active phases of cell cycle (G(1), S) and then exposed to microwaves will also be sensitive to electromagnetic field. An anechoic chamber of our design containing a microplate with cultured cells and an antenna emitting microwaves (900 MHz simulated GSM signal, 27 V/m, SAR 0.024 W/kg) was placed inside the ASSAB incubator. The microcultures of PBMC exposed to microwaves demonstrated significantly higher response to mitogens and higher immunogenic activity of monocytes (LM index) than control cultures. LM index, described in detail elsewhere (Dabrowski et al., 2001), represents the monokine influence on lymphocyte mitogenic response. The results suggest that immune activity of responding lymphocytes and monocytes can be additionally intensified by 900 MHz microwaves.     

Volume-averaged SAR in adult and child head models when using mobile phones: a computational study with detailed CAD-based models of commercial mobile phones

Previous studies comparing SAR difference in the head of children and adults used highly simplified generic models or half-wave dipole antennas. The objective of this study was to investigate the SAR difference in the head of children and adults using realistic EMF sources based on CAD models of commercial mobile phones. Four MRI-based head phantoms were used in the study. CAD models of Nokia 8310 and 6630 mobile phones were used as exposure sources. Commercially available FDTD software was used for the SAR calculations. SAR values were simulated at frequencies 900 MHz and 1747 MHz for Nokia 8310, and 900 MHz, 1747 MHz and 1950 MHz for Nokia 6630. The main finding of this study was that the SAR distribution/variation in the head models highly depends on the structure of the antenna and phone model, which suggests that the type of the exposure source is the main parameter in EMF exposure studies to be focused on. Although the previous findings regarding significant role of the anatomy of the head, phone position, frequency, local tissue inhomogeneity and tissue composition specifically in the exposed area on SAR difference were confirmed, the SAR values and SAR distributions caused by generic source models cannot be extrapolated to the real device exposures. The general conclusion is that from a volume averaged SAR point of view, no systematic differences between child and adult heads were found.     

The effects of natural biofilms on the reattachment of young adult zebra mussels to artificial substrata

This laboratory study examined the effects of natural biofilms on the reattachment of young adult zebra mussels, Dreissena polymorpha, in Petri dishes. Natural biofilms were developed in glass and polystyrene Petri dishes using water samples collected at various times of the year. Biofilms were developed over 1, 3, 8, and 14 d. Controls were clean glass and polystyrene Petri dishes. Zebra mussels collected from the field (< or = 10 mm, ventral length) were placed in the dishes and their reattachment by byssal threads was recorded after 1 d. Zebra mussels reattached to the dish surface or the shells of other mussels in the dish, or remained unattached. The data indicate that reattachment to clean glass was greater than to clean polystyrene (p < or = 0.05, ANOVA), but there were no consistent differences between reattachment to filmed polystyrene and filmed glass dish surfaces. Zebra mussels in control and filmed glass dishes reattached in higher percentages to the dish surface compared to the shells of other mussels (p < or = 0.05, ANOVA). There was no difference in mussel of reattachment between the dish surface and the shells of other mussels in most control polystyrene dishes (p > 0.05, ANOVA), whereas in filmed polystyrene the percentage of reattachment to the dish surface was greater than to the shells of other mussels (p < or = 0.05, ANOVA). These results indicate that substratum wettability and the presence of biofilms on some types of substrata can be factors in the reattachment of young adult zebra mussels.     

Dosimetric analysis of the carousel setup for the exposure of rats at 1.62 GHz

The so-called carousel setup has been widely utilized for testing the hypotheses of adverse health effects on the central nervous system (CNS) due to mobile phone exposures in the frequency bands 800-900 MHz. The objectives of this article were to analyze the suitability of the setup for the upper mobile frequency range, i.e., 1.4-2 GHz, and to conduct a detailed experimental and numerical dosimetry for the setup at the IRIDIUM frequency band of 1.62 GHz. The setup consists of a plastic base on which ten rats, restrained in radially positioned tubes, are exposed to the electromagnetic field emanating from a sleeved dipole antenna at the center. Latest generation miniaturized dosimetric E field and temperature probes were used to measure the specific absorption rate (SAR) inside the brain of three rat cadavers of the Lewis strain and two rat cadavers of the Fisher 344 strain. A numerical analysis was conducted on the basis of three numerical rat phantoms with voxel sizes between 1.5 and 0.125 mm3 that are based on high resolution MRI scans of a 300 g male Wistar rat and a 370 g male Sprague-Dawley rat. The average of the assessed SAR values in the brain was 2.8 mW/g per W antenna input power for adult rats with masses between 220 and 350 g and 5.3 mW/g per W antenna input power for a juvenile rat with a mass of 95 g. The strong increase of the SAR in the brain with decreasing animal size was verified by simulations of the absorption in numerical phantoms scaled to sizes between 100 and 500 g with three different scaling methods. The study also demonstrated that current rat phantom models do not provide sufficient spatial resolution to perform absolute SAR assessment for the brain tissue. The variation of the SAR(brain)(av) due to changes in position was assessed to be in the range from +15% to -30%. A study on the dependence of the performance of the carousel setup on the frequency revealed that efficiency, defined as SAR(brain)(av) per W antenna input power, and the ratio between SAR(brain)(av) and SAR(body)(av) are optimal in the mobile communications frequency range, i.e., 0.8-3 GHz.     

Effects of cell adhesion to the substratum on the growth of chick embryo fibroblasts

Chick embryo fibroblasts were plated on Petri dishes that had not been treated for use in tissue culture (bacteriological dishes). On these dishes the cells grow at the same exponential rate as cells plated on tissue culture dishes, but their growth becomes inhibited sooner after plating, and therefore at a lower cell number per dish. The inhibition of cell growth on bacteriological dishes is correlated with the formation of cell clumps. Clump formation is reversible by mechanical transfer of the clumps to a tissue culture dish: the cells migrate out of the clumps, form a monolayer, and cell growth resumes.Clump formation was studied by time-lapse cinematography, and was found to be due to reduced adhesion of the cells to the bacteriological dish surface. This reduced adhesiveness of the substratum is due to a lower number of negatively-charged residues on the bacteriological dish surface, which can be measured by the binding of crystal violet. The number of negatively-charged residues, and therefore the adhesiveness of the substratum can be altered by treatment of the dishes with sulfuric acid. Serum components of the medium were found to affect cell adhesion to the bacteriological dishes, consequently altering the efficiency of cell attachment, the extent of cell growth and the pattern of clump formation.The cells in clumps were compared with those in confluent monolayers on tissue culture dishes. Growth-inhibited cells on both types of dish were found to be equally viable. Cells in clumps on bacteriological dishes were found to be inhibited in the G1 phase of the cell cycle, as are cells in density-inhibited monolayers. Infection by the oncogenic virus, Rous sarcoma virus, can release the cells from growth-inhibition on both types of dish. Cell-induced alterations of the medium are not involved in the growth inhibition of cells on bacteriological dishes.     

Assessment of SAR and thermal changes near a cochlear implant system for mobile phone type exposures

A cochlear implant system is a device used to enable hearing in people with severe hearing loss and consists of an internal implant and external speech processor. This study considers the effect of scattered radiofrequency fields when these persons are subject to mobile phone type exposure. A worst-case scenario is considered where the antenna is operating at nominal full power, the speech processor is situated behind the ear using a metallic hook, and the antenna is adjacent to the hook and the internal ball electrode. The resultant energy deposition and thermal changes were determined through numerical modelling. With a 900 MHz half-wave dipole antenna producing continuous-wave (CW) 250 mW power, the maximum 10 g averaged SAR was 1.31 W/kg which occurred in the vicinity of the hook and the ball electrode. The maximum temperature increase was 0.33 degrees C in skin adjacent to the hook. For the 1800 MHz antenna, operating at 125 mW, the maximum 10 g averaged SAR was 0.93 W/kg in the pinna whilst the maximum temperature change was 0.16 degrees C. The analysis predicts that the wearer complies with the radiofrequency safety limits specified by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), the Institute of Electrical and Electronics Engineers (IEEE), and the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) for 900 and 1800 MHz mobile phone type exposure and thus raises no cause for concern. The resultant temperature increase is well below the maximum rise of 1 degrees C recommended by ICNIRP. Effects in the cochlea were insignificant.     

A numerical and experimental comparison of human head phantoms for compliance testing of mobile telephone equipment

A new human head phantom has been proposed by CENELEC/IEEE, based on a large scale anthropometric survey. This phantom is compared to a homogeneous Generic Head Phantom and three high resolution anatomical head models with respect to specific absorption rate (SAR) assessment. The head phantoms are exposed to the radiation of a generic mobile phone (GMP) with different antenna types and a commercial mobile phone. The phones are placed in the standardized testing positions and operate at 900 and 1800 MHz. The average peak SAR is evaluated using both experimental (DASY3 near field scanner) and numerical (FDTD simulations) techniques. The numerical and experimental results compare well and confirm that the applied SAR assessment methods constitute a conservative approach.