Photoluminescence and electron paramagnetic resonance properties of a potential phototherapic agent: MMgF4:Gd3+ (M = Ba,Sr) sub‐microphosphors

Novel narrow band UVB‐emitting phosphors, BaMgF₄:Gd³⁺ and SrMgF₄:Gd³⁺ phosphors, were synthesized using a co‐precipitation synthesis method. X‐Ray diffraction analysis was carried out to confirm compound formation, phase purity and crystallinity of the phosphor. At 274 nm excitation, phosphors show a sharp narrow band emission at 313 nm that can be assigned to ⁶P_7/2 → ⁸S_7/2 transition of the Gd³⁺ ion. With increasing dopant concentration, intensity enhances and then decreases after a certain concentration, which is an indication of concentration quenching taking place in the phosphor. Scanning electron microscopy images of the phosphor show agglomerated particles in the sub‐micron range. Particles range in size from 600 to 800 nm. Electron paramagnetic resonance studies of the phosphors were carried out to detect radicals present in the prepared phosphor. With narrow band UVB emission, phosphor seems to be a good candidate for UV phototherapy application. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence study of Dy or Ce activated LiCaBO3 phosphor for γ‐ray and C5+ ion beam irradiation

The photoluminescence and thermoluminescence characteristics of rare earths (Dy or Ce) activated LiCaBO₃ phosphors have been studied. Phosphors were synthesized by modified solid state synthesis. The phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and thermoluminescence (TL) for structural, morphological and luminescence studies. Dy³⁺ activated LiCaBO₃ shows emission at 486 and 577 nm due to ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transition, respectively, whereas the PL emission spectra of Ce³⁺ activated LiCaBO₃ phosphor shows a broad band peaking at 432 nm, which is due to the transition from 5d level to the ground state of the Ce³⁺ ion. The thermoluminescence study was also carried out for both these phosphors for γ‐ray irradiation and carbon beam irradiation. Linearity was studied for a 0.4–3.1 Rad dose γ‐rays. Linear behaviour over this dose range was observed. Gamma ray‐irradiated phosphors were shown to be negligible fading upon storage. All the samples were also studied for 75 MeV C⁵⁺ ion beam exposure in the range of 3.75 × 10¹² – 7.5 × 10¹³ ion cm^–2 fluence. In addition to this, trapping parameters of all the samples were also calculated using Chen's peak shape method. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced green emissions of Er3+/Yb3+ co‐doped Gd2(MoO4)3 by co‐excited up‐conversion processes

Improving the emission from rare earth ions doped materials is of great importance to broaden their application in bio‐imaging, photovoltaics and temperature sensing. The green emissions of Gd₂(MoO₄)₃:Er³⁺/Yb³⁺ powder upon co‐excitation with 980 and 808 nm lasers were investigated in this paper. Distinct enhancement of green emissions was observed compared with single laser excitation. Based on the energy level structure of Er³⁺, the enhancement mechanism was discussed. Moreover, the result of temperature‐dependent enhancement revealed that the enhancement factor reached its maximum (2.5) as the sample heated to 120°C, which is due to the competition of two major thermal effects acting in the co‐excited up‐conversion processes. In addition, the same enhancement of green emissions was also observed in Gd₂(MoO₄)₃:Er³⁺ powder and NaYF₄:Er³⁺/Yb³⁺ powder.     

Effect of Ga3+ and Gd3+ ions substitution on the structural and optical properties of Ce3+‐doped yttrium aluminium garnet phosphor nanopowders

The structural and optical properties of commercially obtained Y₃Al₅O₁₂:Ce³⁺ phosphor were investigated by replacing Al³⁺ with Ga³⁺ and Y³⁺ with Gd³⁺ in the Y₃Al₅O₁₂:Ce³⁺ structure to form Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Y,Gd)₃Al₅O₁₂:Ce³⁺. X‐Ray diffraction (XRD) results showed slight 2‐theta peak shifts to lower angles when Ga³⁺ was used and to higher angles when Gd³⁺ was used, with respect to peaks from Y₃Al₅O₁₂:Ce³⁺ and JCPDS card no. 73–1370. This could be attributed to induced crystal‐field effects due to the different ionic sizes of Ga³⁺ and Gd³⁺ compared with Al³⁺ and Y³⁺. The photoluminescence (PL) spectra showed broad excitation from 350 to 550 nm with a maximum at 472 nm, and broad emission bands from 500 to 650 nm, centred at 578 nm for Y₃Al₅O₁₂:Ce³⁺ arising from the 5d → 4f transition of Ce³⁺. PL revealed a blue shift for Ga³⁺ substitution and a red shift for Gd³⁺ substitution. UV–Vis showed two absorption peaks at 357 and 457 nm for Y₃Al₅O₁₂:Ce³⁺, with peaks shifting to 432 nm for Ga³⁺ and 460 nm for Gd³⁺ substitutions. Changes in the trap levels or in the depth and number of traps due to Ce³⁺ were analysed using thermoluminescence (TL) spectroscopy. This revealed the existence of shallow and deep traps. It was observed that Ga³⁺ substitution contributes to the shallowest traps at 74 °C and fewer deep traps at 163 °C, followed by Gd³⁺ with shallow traps at 87 °C and deep traps at 146 °C. Copyright © 2016 John Wiley & Sons, Ltd.     

Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.     

Enhanced luminescence and white light emission from Eu3+‐co‐doped K3Ca2(SO4)3Cl:Dy3+ phosphor with near visible ultraviolet excitation for white LEDs

The luminescent properties of europium (Eu)‐ and dysprosium (Dy)‐co‐doped K₃Ca₂(SO₄)₃Cl halosulfate phosphors were analyzed. This paper reports the photoluminescence (PL) properties of K₃Ca₂(SO₄)₃Cl microphosphor doped with Eu and Dy and synthesized using a cost‐effective wet chemical method. The phosphors were characterized by X‐ray diffraction and scanning electron microscopy. The CIE coordinates were calculated to display the color of the phosphor. PL emission of the prepared samples show peaks at 484 nm (blue), 575 nm (yellow), 594 nm (orange) and 617 nm (red). The emission color of the Eu,Dy‐co‐doped K₃Ca₂(SO₄)₃Cl halophosphor depends on the doping concentration and excitation wavelength. The addition of Eu in K₃Ca₂(SO₄)₃Cl:Dy greatly enhances the intensity of the blue and yellow peaks, which corresponds to the ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions (under 351 nm excitation). The Eu³⁺/Dy³⁺ co‐doping also produces white light emission for 1 mol% of Eu³⁺, 1 mol% of Dy³⁺ in the K₃Ca₂(SO₄)₃Cl lattice under 396 nm excitation, for which the calculated chromaticity coordinates are (0.35, 0.31). Thus, K₃Ca₂(SO₄)₃Cl co‐doped with Eu/Dy is a suitable candidate for NUV based white light‐emitting phosphors technology. Copyright © 2014 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermoluminescence and photoluminescence studies on γ‐ray‐irradiated Ce3+,Tb3+‐doped potassium chloride single crystals

Single crystals of KCl doped with Ce³⁺,Tb³⁺ were grown using the Bridgeman–Stockbarger technique. Thermoluminescence (TL), optical absorption, photoluminescence (PL), photo‐stimulated luminescence (PSL), and thermal‐stimulated luminescence (TSL) properties were studied after γ‐ray irradiation at room temperature. The glow curve of the γ‐ray‐irradiated crystal exhibits three peaks at 420, 470 and 525 K. F‐Light bleaching (560 nm) leads to a drastic change in the TL glow curve. The optical absorption measurements indicate that F‐ and V‐centres are formed in the crystal during γ‐ray irradiation. It was attempted to incorporate a broad band of cerium activator into the narrow band of terbium in the KCl host without a reduction in the emission intensity. Cerium co‐doped KCl:Tb crystals showed broad band emission due to the d–f transition of cerium and a reduction in the intensity of the emission peak due to ⁵D₃–⁷F_j (j = 3, 4) transition of terbium, when excited at 330 nm. These results support that energy transfer occurs from cerium to terbium in the KCl host. Co‐doping Ce³⁺ ions greatly intensified the excitation peak at 339 nm for the emission at 400 nm of Tb³⁺. The emission due to Tb³⁺ ions was confirmed by PSL and TSL spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Infrared and visible emissions of rare‐earth‐doped CeO2 phosphor

This paper reports the synthesis and characterization of Er³⁺‐doped CeO₂ phosphor with variable concentrations of erbium. The sample was synthesized using a solid‐state reaction method, which is useful for the large‐scale production of phosphors and is also eco‐friendly. The prepared sample was characterized using an X‐ray diffraction (XRD) technique. The XRD pattern confirmed that sample has the pure cubic fluorite crystal structure of CeO₂. The crystallite size of the prepared phosphor was determined by Scherer's formula and the crystallite size giving an intense XRD peak is 40.06 nm. The surface morphology of the phosphor was determined by field emission gun scanning electron microscopy (FEGSEM). From the FEGSEM image, good surface morphology with some agglomerates was found. The functional group in the prepared sample was analysed by Fourier transform infrared (FTIR) spectroscopy. All samples prepared with variable concentrations of Er³⁺ (0.1–2 mol%) were studied by photoluminescence analysis and it was found that the excitation spectra of the prepared phosphor shows broad excitation centred at 251 nm. Emission spectra at different concentrations of Er³⁺ show strong peaks at 413 and 470 nm and a weaker peak at 594 nm. The dominant peaks at 413 and 470 nm are caused by the allowed electronic transition ⁴S_3/2 → ⁴I_15/2 and the weaker transition at 594 nm is due to the transition ⁴ F_9/2 → ⁴I_15/2. Spectrophotometric determinations of peaks were evaluated using the Commission Internationale de I'Eclairage (CIE) technique. The emission spectra were also observed using an infrared (IR) laser 980 nm source, and three distinct peaks were found in the IR region at 848, 870 and 980 nm. The prepared phosphor has utility for application in display devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of a new orange–red‐emitting Sm3+–La3SbO7 phosphor

The antimonate compound La₃SbO₇ has high chemical stability, lattice stiffness and thermal stability. Orange–red‐emitting antimonate‐based phosphors La₃SbO₇:xSm³⁺ (x = 0.02, 0.05, 0.08, 0.10, 0.15, 0.20 and 0.25) were synthesized. The phase structure and photoluminescence properties of these phosphors were investigated. The emission spectrum obtained on excitation at 407 nm contained exclusively the characteristic emissions of Sm³⁺ at 568, 608, 654 and 716 nm, which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 of Sm³⁺, respectively. The strongest emission was located at 608 nm due to the ⁴G_5/2→⁶H_7/2 transition of Sm³⁺, generating bright orange–red light. The critical quenching concentration of Sm³⁺ in La₃SbO₇:Sm³⁺ phosphor was determined as 10% and the energy transfer between Sm³⁺ was found to be through an exchange interaction. The International Commission on Illumination chromaticity coordinates of the La₃SbO₇:0.10Sm³⁺ phosphors are located in the orange–red region. The La₃SbO₇:Sm³⁺ phosphors may be potentially used as red phosphors for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of Sm3+‐doped Bi4Si3O12 red‐emitting phosphor

A series of novel red‐emitting Sm³⁺‐doped bismuth silicate phosphors, Bi₄Si₃O₁₂:xSm³⁺ (0.01 ≤ x ≤ 0.06), were prepared via the sol–gel route. The phase of the synthesized samples calcinated at 800 °C is isostructural with Bi₄Si₃O₁₂ according to X‐ray diffraction results. Under excitation with 405 nm light, some typical peaks of Sm³⁺ ions centered at 566, 609, 655 and 715 nm are found in the emission spectra of the Sm³⁺‐doped Bi₄Si₃O₁₂ phosphors. The strongest peak located at 609 nm is due to ⁴G_5/2–⁶H_7/2 transition of Sm³⁺. The luminescence intensity reaches its maximum value when the Sm³⁺ ion content is 4 mol%. The results suggest that Bi₄Si₃O₁₂:Sm³⁺ may be a potential red phosphor for white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence and energy transfer in Ce3+, Mn2+‐doped K2AEP2O7 (AE = Ca,Sr) phosphor

Pyrophosphates K₂AEP₂O₇ (AE = Ca, Sr) prepared by the classical solid‐state technique and activated with Ce³⁺ are described. Intense emission was observed in K₂AEP₂O₇ (AE = Ca, Sr). The effect of Mn²⁺ co‐doping was studied. The broad emission peak of Mn²⁺ was observed at 534 nm in K₂SrP₂O₇:Ce³⁺ and at 539 nm in K₂CaP₂O₇:Ce³⁺, Mn²⁺. Mn²⁺ emission was greatly enhanced by addition of the sensitizer Ce³⁺ due to efficient energy transfer from Ce³⁺ to Mn²⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Probing the optical properties and luminescence mechanism of a UV‐emitting SrBPO5:Ce3+ phosphor

Ce‐doped (1 × 10^?5 to 3.0 mol%) SrBPO₅ phosphors were synthesized using a conventional solid‐state reaction route at 1273 K in an air atmosphere. Phase and morphology of the samples were studied from powder X‐ray diffraction (XRD) patterns and scanning electron microscope (SEM) micrographs, respectively. The band gap energies of the pure and Ce‐doped SrBPO₅ phosphors were calculated from the recorded diffuse reflectance spectra. Photoluminescence (PL) and Ce³⁺ lifetime were recorded at 300 and 77 K. Photoluminescence lifetime measurements revealed two‐lifetime values for Ce³⁺ at both 300 K (17 and 36 nsec) and 77 K (12 and 30 nsec), suggesting the presence of two different environments around Ce³⁺. Time‐resolved emission spectroscopy (TRES) studies confirmed the presence of Ce³⁺ in two different environments. In addition, SrBPO₅:Ce exhibited intense UV emission, signifying its possible use as an efficient sensitizer for solid‐state lighting applications. The effect of γ‐irradiation on PL was also determined. Thermally stimulated luminescence (TSL) glow curves of the γ‐irradiated phosphor, along with trap parameters, dose–response, and the possible TSL mechanism were also investigated. Positron annihilation lifetime spectroscopy was carried out to probe defects present in undoped and Ce‐doped SrBPO₅.     

Enhanced photoluminescence properties of electrospun Dy3+‐doped ZnO nanofibres for white lighting devices

Dy³⁺‐doped ZnO nanofibres with diameters from 200 to 500 nm were made using an electrospinning technique. The as‐fabricated amorphous nanofibres resulted in good crystalline continuous nanofibres through calcination. Dy³⁺‐doped ZnO nanofibres were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) light spectroscopy, Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). XRD showed the well defined peaks of ZnO. UV–vis spectra showed a good absorption band at 360 nm. FTIR spectra showed a Zn–O stretching vibration confirming the presence of ZnO. Photoluminescence spectra of Dy³⁺‐doped ZnO nanofibres showed an emission peak in the visible region that was free from any ZnO defect emission. Emissions at 480 nm and 575 nm in the Dy³⁺‐doped ZnO nanofibres were the characteristic peaks of dopant Dy³⁺ and implied efficient energy transfer from host to dopant. Luminescence intensity was found to be increased with increasing doping concentration and reduction in nanofibre diameter. Colour coordinates were calculated from photometric characterizations, which resembled the properties for warm white lighting devices.     

Tunable photoluminescence properties of Sr1‐yCayMoO4:Sm3+ phosphors (0 ≤ y < 1)

A series of Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors was synthesized by a conventional solid‐state reaction method in air, and their structural and spectroscopic properties were investigated. The optimal doping concentration of Sm³⁺ in SrMoO₄:Sm³⁺ phosphor is 5 mol%. Under excitation with 275 nm, in Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors, the emission band of the host was found to overlap with the excitation bands peaking at ~500 nm of Sm³⁺ ion, and the energy transfer from MoO₄^2? group to Sm³⁺ ion can also be observed. The International Commission on Illumination (CIE) chromaticity coordinates of Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation 275 nm varied systematically from an orange (0.4961, 0.3761) (y = 0) to a white color (0.33, 0.3442) (y = 0.95) with increasing calcium oxide (CaO) concentration. However, Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation at 404 nm only showed red emission and the energy transfer between MoO₄^2? group to Sm³⁺ ion was not observed. The complex mechanisms of luminescence and energy transfer are discussed by energy level diagrams of MoO₄^2? group and Sm³⁺ ion. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence,cathodoluminescence and thermal stability of Sm3+‐activated Sr3La(VO4)3 red‐emitting phosphors

A series of Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors were synthesized by a facile sol‐gel method. X‐ray diffraction patterns and photoluminescence (PL)/cathodoluminescence (CL) spectra as well as PL decay curves were employed to characterize the obtained samples. Upon 402 nm light excitation, the characteristic emissions of Sm³⁺ ions corresponding to ⁴G_5/2→⁶H_J transitions were observed in all the as‐prepared products. The PL emission intensity was increased with increase in Sm³⁺ ion concentration, while concentration quenching occurred when the doping concentration was over 4 mol%. The non‐radiative energy transfer mechanism for concentration quenching of Sm³⁺ ions was dominated by dipole–dipole interaction and the critical distance was around 21.59 Å. Furthermore, temperature‐dependent PL emission spectra revealed that the obtained phosphors possessed good thermal stability with an activation energy of 0.19 eV. In addition, the CL spectra of the samples were almost the same as the PL spectra, and the CL emission intensity showed a tendency to increase with increase in accelerating voltage and filament current. These results suggest that the Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors with good color coordinates, high color purity and superior thermal stability may be a potential candidate for applications in white light‐emitting diodes and field‐emission displays as red‐emitting phosphors.     

Enhancement of the luminescence properties of Sr3(PO4)2:Dy3+,Li+ white‐light‐emitting phosphors by charge compensator Li+ co‐doping

Sr₃(PO₄)₂:Dy³⁺,Li⁺ phosphors were prepared using a simple high temperature solid method for luminescence enhancement. The structures of the as‐prepared samples agreed well with the standard phase of Sr₃(PO₄)₂, even when Dy³⁺ and Li⁺ were introduced. Under ultraviolet excitation at 350 nm, the Sr₃(PO₄)₂:Dy³⁺ sample exhibited two emission peaks at 483 nm and 580 nm, which were due to the ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions, respectively. A white light was fabricated using these two emissions from the Sr₃(PO₄)₂:Dy³⁺ phosphors. The luminescence properties of Sr₃(PO₄)₂:Dy³⁺,Li⁺ phosphors, including emission intensity and decay time, were improved remarkably with the addition of Li⁺ as the charge compensator, which would promote their application in near‐ultraviolet excited white‐light‐emitting diodes.     

Photoluminescence properties of LiBaPO4:M3+ phosphor for near‐UV light‐emitting diode (M = Eu and Dy)

A novel phosphor LiBaPO₄ doped with rare earths Eu and Dy prepared by high temperature solid‐state reaction method is reported. The phosphors were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorophotometer. The excitation spectra of LiBaPO₄:Eu³⁺ phosphor can be efficiently excited by 394 nm, which is matched well with the emission wavelength of near‐UV light‐emitting diode (LED) chip. PL properties of Eu³⁺‐doped LiBaPO₄ exhibited the characteristic red emission coming from ⁵D₀ → ⁷ F₁ (593 nm) and ⁵D₀ → ⁷ F₂ (617 nm) electronic transitions with color co‐ordinations of (0.680, 0.315). The results demonstrated that LiBaPO₄:Eu³⁺ is a potential red‐emitting phosphor for near‐UV LEDs. Emission spectra of LiBaPO₄:Dy³⁺ phosphors showed efficient blue (481 nm) and yellow (574 nm) bands, which originated from ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of the Dy³⁺ ion, respectively. The 574 nm line is more intense than the 481 nm lines, which indicates that the site Dy³⁺ is located with low symmetry. This article summarizes fundamentals and possible applications of optically useful inorganic phosphates with visible photoluminescence of Eu³⁺ and Dy³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Sm3+‐doped YAl3(BO3)4 phosphor

A near ultraviolet excitable phosphor based on Sm³⁺‐doped YAl₃(BO₃)₄ has been synthesized by modified solid‐state reaction at 1000°C. The phase purity and photoluminescence (PL) behavior of the phosphor are studied in detail using the powder X‐ray diffraction technique and PL measurements. X‐ray diffraction reveals that the phase purity of YAl₃(BO₃)₄ critically depends upon the boric acid concentration. The phosphor has strong excitation at 406 nm in the near ultraviolet region (350–420 nm) and its emission peaks were monitored at 564, 599 and 643 nm. Further, detailed PL analysis demonstrates that the substitution of Sm³⁺ ions at sites of Y³⁺ and Al³⁺ ions enhances the PL efficiency of the phosphor appreciably. First, the PL efficiency of YAl₃(BO₃)₄:Sm³⁺ was compared with commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The Fourier transform infrared study provides essential information regarding the change in metal–oxygen bond vibrations of the phosphor. The morphology of the phosphor was investigated through scanning electron microscopy, which reveals that the phosphor possessed distorted spherical and rectangular shapes with average grain sizes in the range 0.5–1 µm. Copyright © 2013 John Wiley & Sons, Ltd.