A water-soluble 1,8-naphthalimide-based fluorescent pH probe for distinguishing tumorous tissues and inflammation in mice

A water-soluble fluorescent probe BPN, by introducing a piperazine as the pH-sensitive fluorescence signaling motif to the hydrophilic propionic acid-substituted 1,8-naphthalimide fluorophore, is highly sensitive to pH changes within cytoplasm matrix in living cells, as well as pH-related diseases models. Owing to the protonation-induced inhibition of the photoinduced electron transfer (PET) from piperazine to naphthalimide fluorophore, BPN displayed a significant fluorescence enhancement (more than 131-fold) upon the pH decreasing from 11.0 to 3.0. The linear range was between pH 6.4 to 8.0 with a pK_a value of 6.69 near the physiological pH, which was suitable for cytosolic pH research. Furthermore, BPN exhibited a large Stokes shift (142 nm), good water solubility, excellent photostability, high selectivity and low cytotoxicity. All these advantages were particularly beneficial for intracellular pH imaging. Using BPN, we demonstrated the real-time monitoring of cytosolic pH changes in living cells. Most importantly, BPN has not only been successfully applied for distinguishing inflammation in mice, but also the surgical specimens of cancer tissue, making it of great potential application in cancer diagnosis.     

Design and synthesis of a new fluorescent probe for cascade detection of Zn2+ and H2PO4− in water and targeted imaging of living cells

Design and synthesis of new fluorescence probes with good water‐solubility is of great importance to better understanding the significant role of ions which are related to biology and the environment. As important ions, zinc ion (Zn²⁺) and dihydrogen phosphate ion (H₂PO₄^?) display essential roles in living systems, and quantitative detection of these ions in water is still a challenge. In order to consider the significant role of the galactose moiety in the design of a water‐soluble fluorescence sensor, herein, we have developed a novel probe, Gal‐AQTF, for the cascade detection of Zn²⁺ and H₂PO₄^? with excellent selectivity in water. Through the introduction of the galactose moiety onto the sensor AQTF, which has been reported earlier by us, the water‐solubility, cell compatibility and targeting ability were enhanced. Gal‐AQTF has been successfully applied in the imaging of the living cells of HepG2 and A549, and illustrated good selectivity for the HepG2 cells which overly express the asialoglycoprotein (ASGP) receptor.     

Sodium 4‐mercaptophenolate capped CdSe/ZnS quantum dots as a fluorescent probe for pH detection in acidic aqueous media

Development of the fluorescent pH detection method is promising due to the sensitivity, easy operation, and low‐cost, etc. However, traditional organic fluorophores have still some disadvantages such as the tedious preparation and purification as well as low photostability and water solubility, which limits the rapid detection application. Semiconductor quantum dots (QDs) have recently risen to prominence as an alternative for organic fluorophores in fluorescence analysis by virtue of their convenient synthesis and superior optical properties. In this study, we report on sodium 4‐mercaptophenolate functionalized CdSe/ZnS QDs (denoted as ^?OPhS‐QDs), which can serve as a selective “on–off” fluorescence probe for aqueous media pH. ^?OPhS‐QDs exhibit strong fluorescence in near neutral medium. As a Lewis organic base, ^?OPhS‐ moieties on QDs surface easily binds to proton under acidic conditions to yield 4‐mercaptophenol capped QDs (i.e. HOPhS‐QDs), which acts as an efficient hole trapper. As a result, the QDs photoluminescence (PL) is switched off. Under optimal conditions, the present probe exhibits a good linear relationship between fluorescence response and pH values in the pH range 3.0–5.2. Furthermore, the present probe exhibits a high selectivity for proton over other common cations and has been successfully used for pH detection in real water samples.     

A coumarin‐based fluorescent probe for Hg2+ and its application in living cells and zebrafish

Mercury (Hg) is a heavy metal with high toxicity and easy migration; it can be enriched through the food chain, and cause serious threats to the natural environment and human health. So, the development of a method that can be used to detect mercury ions (Hg²⁺) in the environment, in cells, and in organisms is very important. Here, a new 7‐hydroxycoumarin‐derived carbonothioate‐based probe ( CC‐Hg ) was designed and synthesized for detection of Hg²⁺. After addition of Hg²⁺, a large fluorescence enhancement was observed due to the formation of 7‐hydroxyl, which reinforced the intramolecular charge transfer process. The CC‐Hg probe had good water solubility and selectivity. Moreover, the probe was able to detect Hg²⁺ quantitatively over the concentration range 0–2 μM and with a detection limit of 7.9 nM. Importantly, we successfully applied the probe to detect Hg²⁺ in water samples, in living cells, and in zebrafish. The experimental results demonstrated its potential value in practical applications.     

Synthesis of a novel fluorescent probe based on 7‐nitrobenzo‐2‐oxa‐1,3‐diazole skeleton for the rapid determination of vitamin B12 in pharmaceuticals

A new fluorescent probe, 4‐N,N‐di(2‐hydroxyethyl)imino‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (HINBD) was synthesized in a single step with reasonably good yield. The water‐soluble HINBD emits strongly in the visible region (λ_ex = 479 nm, λ_em = 545 nm) and is stable over a wide range of pH values. It was found that vitamin B₁₂ (VB₁₂) had the ability to quench the fluorescence of HINBD, and the quenched fluorescence intensity was proportional to the concentration of VB₁₂. A method for VB₁₂ determination based on the quenching fluorescence of HINBD was thus established. Interference effects of various substances, including sugars, vitamins, amino acids, inorganic cations and some organic substances have been studied. Under optimal conditions, the linear range is 0.0–2.4 × 10^–5 mol/L. The determination limit is 8.3 × 10^–8 mol/L. The method was applied to measure VB₁₂ in pharmaceutical preparations with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

One‐pot synthesis of fluorescent nitrogen‐doped carbon dots with good biocompatibility for cell labeling

Here we report an easy and economical hydrothermal carbonization approach to synthesize the fluorescent nitrogen‐doped carbon dots (N‐CDs) that was developed using citric acid and triethanolamine as the precursors. The synthesis conditions were optimized to obtain the N‐CDs with superior fluorescence performances. The as‐prepared N‐CDs are monodispersed sphere nanoparticles with good water solubility, and exhibited strong fluorescence, favourable photostability and excitation wavelength‐dependent behavior. Furthermore, the in vitro cytotoxicity and cellular labeling of N‐CDs were investigated using the rat glomerular mesangial cells. The results showed the N‐CDs have more inconspicuous cytotoxicity and better biosafety in comparison with ZnSe quantum dots, although both targeted the cells successfully. Considering their admirable photostability, low toxicity and good compatibility, the as‐obtained N‐CDs could have potential applications in biosensors, cellular imaging, and other fields.     

A triazole‐based fluorescence probe for detecting Hg2+ ions and its biological application

A new compound, ethyl 5‐phenyl‐2‐(p‐tolyl)‐2H‐1,2,3‐triazole‐4‐carboxylate was successfully introduced and synthesized as a novel rhodamine B derivative named REPPC, and characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, and high resolution mass spectrometry (HRMS). It showed an obvious fluorescence and UV–visible light absorption enhancement towards Hg²⁺ ion without interference from common metal ions in N,N‐dimethylformamide–H₂O (pH 7.4). The spirolactam ring moiety of rhodamine in REPPC was converted to the open‐ring form generating a 1:1 complex with the intervention of a mercury ion, verified by electrospray ionization‐mass spectroscopy testing and density functional theory calculation. REPPC was used to visualize the level of mercury ions in living HeLa cells with encouraging results.     

Carbon dots synthesized by the m‐trihydroxybenzene as the carbon source and its application on the detection of pH value

New carbon dots (CDs) were prepared by a microwave method using m‐trihydroxybenzene and dilute sulphuric acid as raw materials. The as‐prepared CDs exhibited excellent water solubility and photoluminesence properties. The optimum excitation and emission wavelengths of the new CDs were at 365 nm and 465 nm, respectively. The fluorescence of the new CDs experienced remarkable changes in the presence of Britton–Robinson (BR) buffer solution with different pH values under 4°C after reacting for 70 min. In addition, a linear relationship between the logarithm of the relative fluorescence intensity ratio [lg(I_F/I_Fo)] of CDs and the pH values of the sensing system ranging 1.81–5.72 was obtained, with a correlation coefficient of 0.9933. Thus, a sensitive and simple method to detect the pH value of solution was developed. Furthermore, the analytical application of detecting the concentration of acetic acid in vinegar was investigated. The detection values were found similar to the reference values, fully demonstrating a good linear relationship between the logarithm of the relative fluorescence intensity ratio of the CDs and the pH value of the system. Hence, the method could be used to detect the concentration of acetic acid in vinegar.     

Fluorescent sensors based on quinoline‐containing styrylcyanine: determination of ferric ions,hydrogen peroxide,and glucose,pH‐sensitive properties and bioimaging

A novel styrylcyanine‐based fluorescent probe 1 was designed and synthesized via facile methods. Ferric ions quenched the fluorescence of probe 1, whereas the addition of ferrous ions led to only small changes in the fluorescence signal. When hydrogen peroxide was introduced into the solution containing probe 1 and Fe²⁺, Fe²⁺ was oxidized to Fe³⁺, resulting in the quenching of the fluorescence. The probe 1/Fe²⁺ solution fluorescence could also be quenched by H₂O₂ released from glucose oxidation by glucose oxidase (GOD), which means that probe 1/Fe²⁺ platform could be used to detect glucose. Probe 1 is fluorescent in basic and neutral media but almost non‐fluorescent in strong acidic environments. Such behaviour enables it to work as a fluorescent pH sensor in both the solution and solid states and as a chemosensor for detecting volatile organic compounds with high acidity and basicity. Subsequently, the fluorescence microscopic images of probe 1 in live cells and in zebrafish were achieved successfully, suggesting that the probe has good cell membrane permeability and a potential application for imaging in living cells and living organisms. Copyright © 2014 John Wiley & Sons, Ltd.     

Excessive use of nitrogen in Chinese agriculture results in high N2O/(N2O+N2) product ratio of denitrification,primarily due to acidification of the soils

China is the world's largest producer and consumer of fertilizer N, and decades of overuse has caused nitrate leaching and possibly soil acidification. We hypothesized that this would enhance the soils' propensity to emit N₂O from denitrification by reducing the expression of the enzyme N₂O reductase. We investigated this by standardized oxic/anoxic incubations of soils from five long‐term fertilization experiments in different regions of China. After adjusting the nitrate concentration to 2 mM, we measured oxic respiration (R), potential denitrification (D), substrate‐induced denitrification, and the denitrification product stoichiometry (NO, N₂O, N₂). Soils with a history of high fertilizer N levels had high N₂O/(N₂O+N₂) ratios, but only in those field experiments where soil pH had been lowered by N fertilization. By comparing all soils, we found a strong negative correlation between pH and the N₂O/(N₂O+N₂) product ratio (r² = 0.759, P < 0.001). In contrast, the potential denitrification (D) was found to be a linear function of oxic respiration (R), and the ratio D/R was largely unaffected by soil pH. The immediate effect of liming acidified soils was lowered N₂O/(N₂O+N₂) ratios. The results provide evidence that soil pH has a marginal direct effect on potential denitrification, but that it is the master variable controlling the percentage of denitrified N emitted as N₂O. It has been known for long that low pH may result in high N₂O/(N₂O+N₂) product ratios of denitrification, but our documentation of a pervasive pH‐control of this ratio across soil types and management practices is new. The results are in good agreement with new understanding of how pH may interfere with the expression of N₂O reductase. We argue that the management of soil pH should be high on the agenda for mitigating N₂O emissions in the future, particularly for countries where ongoing intensification of plant production is likely to acidify the soils.     

Microwave‐assisted aqueous synthesis of new quaternary‐alloyed CdSeTeS quantum dots; and their bioapplications in targeted imaging of cancer cells

In this study, we report for the first time a one‐pot approach for the synthesis of new CdSeTeS quaternary‐alloyed quantum dots (QDs) in aqueous phase by microwave irradiation. CdCl₂ was used as a Cd precursor during synthesis, NaHTe and NaHSe were used as Te and Se precursors and mercaptopropionic acid (MPA) was used as a stabilizer and source of sulfur. A series of quaternary‐alloyed QDs of different sizes were prepared. CdSeTeS QDs exhibited a wide emission range from 549 to 709 nm and high quantum yield (QY) up to 57.7 %. Most importantly, the quaternary‐alloyed QDs possessed significantly long fluorescence lifetimes > 100 ns as well as excellent photostability. Results of high‐resolution transmission electron microscopy (HRTEM), energy dispersive X‐ray spectroscopy (EDX) and powder X‐ray diffraction (XRD) spectroscopy showed that the nanocrystals possessed a quaternary alloy structure with good crystallinity. Fluorescence correlation spectroscopy (FCS) showed that QDs possessed good water solubility and monodispersity in aqueous solution. Furthermore, CdSeTeS QDs were modified with alpha‐thio‐omega‐carboxy poly(ethylene glycol) (HS‐PEG‐COOH) and the modified QDs were linked to anti‐epidermal growth factor receptor (EGFR) antibodies. QDs with the EGFR antibodies as labeling probes were successfully applied to targeted imaging for EGFR on the surface of SiHa cervical cancer cells. We believe that CdSeTeS QDs can become useful probes for in vivo targeted imaging and clinical diagnosis. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid high‐yield N‐acylation of aminothiols: N‐acetylglutathione and N‐acetylhomocysteine and their thiol pKa values

Methodology for the rapid N‐acylation of aminothiols in aqueous solution using procedures commonly employed in biochemical studies is described here. Glutathione disulfide (GSSG) and homocystine were diN‐acetylated in ~100% yield in 0.1 M aqueous NaHCO₃ (pH 8.5) at room temperature by 2.5 equiv of the activated ester, N‐hydroxysulfosuccinimidyl acetate, an efficient water‐soluble acetylating reagent. Following acetone precipitation, diN‐acetylGSSG was further purified and desalted on a strong anion‐exchange (SAX) cartridge. DiN‐acetylhomocystine was simultaneously purified and desalted on a C₁₈ cartridge. The N‐acetylated aminothiols were generated using gel‐immobilized tris(2‐carboxyethyl)phosphine as a reductant, which obviated the need for further purification. Alternatively, disulfide exchange with dissolved dithiothreitol yielded N‐acetylglutathione, which was purified on the SAX cartridge. pH titrations of N‐acetylglutathione (8.99) and N‐acetylhomocysteine (9.66) as well as those of commercially available N‐acetylcysteine (9.53) and N‐acetylpenicillamine (10.21) yielded pK_a(SH) values of importance for biological studies. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Highly luminescent nitrogen‐doped carbon dots for simultaneous determination of chlortetracycline and sulfasalazine

Here, we have presented a green and facile strategy to fabricate nitrogen‐doped carbon dots (N‐CDs) and their applications for determination of chlortetracycline (CTC) and sulfasalazine (SSZ). The fluorescent N‐CDs, prepared by one‐step hydrothermal reaction of citric acid and l ‐arginine, manifested numerous excellent features containing strong blue fluorescence, good water‐solubility, narrow size distribution, and a high fluorescence quantum yield (QY) of 38.8%. Based on the fluorescence quenching effects, the as‐synthesized N‐CDs as a fluorescent nanosensor exhibited superior analytical performances for quantifying CTC and SSZ. The linear range for CTC was calculated to be from 0.85 to 20.38 μg ml^?1 with a low detection limit of 0.078 μg ml^?1. Meanwhile, the linear range for SSZ was estimated to be from 0.34 to 6.76 μg ml^?1 with a low detection limit of 0.032 μg ml^?1. Therefore, the N‐CDs hold admirable application potential for constructing a fluorescent sensor for pharmaceutical analysis.     

Characterization of a highly Al3+‐selective fluorescence probe based on naphthalimide‐Schiff base and its application to practical water samples

A new fluorescent Al³⁺‐probe, N‐allyl‐4‐[3,3′‐((2‐aminoethyl)azanediyl)‐bis(N´‐(2‐hydroxybenzylidene)propanehy‐drazide)]‐1,8‐naphthalimide ( L ), was designed and synthesized based on 1,8‐naphthalimide. The probe L contains 1,8‐naphthalimide moiety as the fluorophore and a Schiff base as the recognition group. The structure of L was determined by single crystal X‐ray. L emission at 526 nm increased on addition of Al³⁺ under excitation wavelength at 350 nm. L exhibited high selectivity and sensitivity fluorescence emission towards to Al³⁺ in ethanol/Tris–HCl buffer solution (1:1, v/v, pH = 7.2) as compared with other tested metal ions. A good linearity with a correlation coefficient (R²) of 0.99 was observed in the concentration range 2–10 μM. The binding constant and the detection limit of L for Al³⁺ were calculated to 2.6 × 10⁴ M^?1 and 0.34 μM, respectively. The results of experiments that including Job plot, ultraviolet–visible (UV–Vis) light titration, fluorescence titration, ESI‐MS and ¹H NMR titration, indicated a 1:1 stoichiometric complex between L and Al³⁺. L was highly effective in monitoring Al³⁺ in real‐life Yellow River and tap water samples.     

Impact of cultivation conditions on N‐glycosylation of influenza virus a hemagglutinin produced in MDCK cell culture

Manufacturers worldwide produce influenza vaccines in different host systems. So far, either fertilized chicken eggs or mammalian cell lines are used. In all these vaccines, hemagglutinin (HA) and neuraminidase are the major components. Both are highly abundant glycoproteins in the viral envelope, and particularly HA is able to induce a strong and protective immune response. The quality characteristics of glycoproteins, such as specific activity, antigenicity, immunogenicity, binding avidity, and receptor‐binding specificity can strongly depend on changes or differences in their glycosylation pattern (potential N‐glycosylation occupancy as well as glycan composition). In this study, capillary gel electrophoresis with laser‐induced fluorescence detection (CGE‐LIF) based glycoanalysis (N‐glycan fingerprinting) was used to determine the impact of cultivation conditions on the HA N‐glycosylation pattern of Madin–Darby canine kidney (MDCK) cell‐derived influenza virus A PR/8/34 (H1N1). We found that adaptation of adherent cells to serum‐free growth has only a minor impact on the HA N‐glycosylation pattern. Only relative abundances of N‐glycan structures are affected. In contrast, host cell adaptation to serum‐free suspension growth resulted in significant changes in the HA N‐glycosylation pattern regarding the presence of specific N‐glycans as well as their abundance. Further controls such as different suppliers for influenza virus A PR/8/34 (H1N1) seed strains, different cultivation scales and vessels in standard or high cell density mode, different virus production media varying in either composition or trypsin activity, different temperatures during virus replication and finally, the impact of β‐propiolactone inactivation resulted—at best—only in minor changes in the relative N‐glycan structure abundances of the HA N‐glycosylation pattern. Surprisingly, these results demonstrate a rather stable HA N‐glycosylation pattern despite various (significant) changes in upstream processing. Only the adaptation of the production host cell line to serum‐free suspension growth significantly influenced HA N‐glycosylation regarding both, the type of attached glycan structures as well as their abundances. Biotechnol. Bioeng. 2013; 110: 1691–1703. © 2013 Wiley Periodicals, Inc.     

A highly selective aggregation‐induced emission fluorogen for sensitive detection of Al3+ in living cells

A Schiff's base derivative was synthesized using a condensation reaction between 8‐formyl‐7‐hydroxy‐4‐methylcoumarin and furan‐2‐carbohydrazide that produced marked aggregation‐induced emission and had excellent ability to specifically recognize aluminium ions (Al³⁺). This compound displayed faint fluorescence in the benign solvent dimethyl formamide, and exhibited obvious green fluorescence following addition of specific amounts of water. Moreover, it exhibited strong blue fluorescence after combination with Al³⁺ even in the presence of other interfering ions. These experimental results demonstrated that this derivative could be used as a fluorescence probe for Al³⁺. The advantages, including significant fluorescence change, high selectivity and sensitivity, and fast response, meant that this probe could be used both to detect Al³⁺ in water samples and for fluorescence imaging in living cells.     

Highly fluorescent carbon dots from wheat bran as a novel drug delivery system for bacterial inhibition

In this study, we prepared carbon dots (CDs) from wheat bran via hydrothermal treatment at 180°C for 3 h. The prepared CDs showed blue‐green fluorescence under UV light. The fluorescence emission study of the CDs revealed that they showed maximum fluorescence emission at 500 nm. The prepared CDs showed a high quantum yield of 33.23%. Solvent‐dependent fluorescence emission analysis of the CDs was performed to study the variation in fluorescence emission characteristics with solvent polarity. The prepared CDs were conjugated with amoxicillin (AMX) to explore its potential for use as a drug delivery agent for AMX. The drug release profile of the CD–AMX conjugates was analyzed at different pH (5.0, 6.8 and 7.2) to study drug release kinetics. CD–AMX conjugates showed notable bacterial inhibition against Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains with minimal cytotoxic effects, indicating its potential as a promising antibacterial drug delivery system.     

Synthesis,spectral properties and antimicrobial activity of a new cationic water‐soluble pH‐dependent poly(propylene imine) dendrimer modified with 1,8‐naphthalimides

A three‐step synthesis was implemented to prepare a quaternary ammonium functionalized blue fluorescent poly(propylene imine) dendrimer modified with pyridinium salt of 4‐acylamino‐1,8‐naphthalimide. The new cationic dendrimer absorbs in the ultraviolet light region and emits blue fluorescence. Its spectral characteristics in organic solvents and in an aqueous solution were studied. The influence of pH on the fluorescence intensity of the dendrimer was established with regard to its use as a pH sensor. The effect of hydroxyl ions on the absorption and fluorescence spectra in dry N,N‐dimethylformamide was also investigated. The antimicrobial activity of the dendrimer was assessed against model pathogenic microorganisms in agar, liquid medium, and after its deposition on cotton fabric.     

Dual‐color‐emitting green fluorescent protein from the sea cactus Cavernularia obesa and its use as a pH indicator for fluorescence microscopy

We isolated and characterized a green fluorescent protein (GFP) from the sea cactus Cavernularia obesa. This GFP exists as a dimer and has absorption maxima at 388 and 498 nm. Excitation at 388 nm leads to blue fluorescence (456 nm maximum) at pH 5 and below, and green fluorescence (507 nm maximum) at pH 7 and above, and the GFP is remarkably stable at pH 4. Excitation at 498 nm leads to green fluorescence (507 nm maximum) from pH 5 to pH 9. We introduced five amino acid substitutions so that this GFP formed monomers rather than dimers and then used this monomeric form to visualize intracellular pH change during the phagocytosis of living cells by use of fluorescence microscopy. The intracellular pH change is visualized by use of a simple long‐pass emission filter with single‐wavelength excitation, which is technically easier to use than dual‐emission fluorescent proteins that require dual‐wavelength excitation. Copyright © 2013 John Wiley & Sons, Ltd.