Blue organic light‐emitting diodes based on fluorene‐bridged quinazoline and quinoxaline derivatives

Two blue emitters based on fluorene‐bridged quinazoline and quinoxaline derivatives were prepared via the Suzuki reaction. Their photoluminescent properties were investigated. Furthermore, theoretical studies on these materials using the density functional theory calculation were conducted. To explore their electroluminescent properties, multilayered organic light‐emitting diodes were fabricated with the following device structure: indium–tin–oxide (180 nm)/4,4′‐bis(N‐(1‐naphthyl)‐N‐phenylamino)biphenyl (50 nm)/blue emitting materials ( 1 and 2 ) (30 nm)/bathophenanthroline (35 nm)/8‐hydroxy‐quinolinato lithium (2 nm)/Al (100 nm). Two devices showed efficient blue emission with the external quantum efficiencies of 1.58% and 1.30%, respectively, at 20 mA/cm², and Commission Internationale dÉclairage coordinates of (0.18, 0.24) and (0.19, 0.27) at 6.0 V. These results suggest that the self‐aggregation properties of emitters would have considerable effects on their photoluminescent and electroluminescent properties.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence behavior of Li2Sr1‐3x/2EuxSiO4 red phosphors for LED applications

Red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ 0≤x≤0.5) phosphors were synthesized at 900°C in air by a solid‐state reaction. The synthesized phosphors were characterized by X‐ray powder diffraction, photoluminescence (PL) excitation (PLE) and PL spectra. The results from the PLE spectra suggest that the strong 394 nm excitation peak associated with the ⁵L₆ state of Eu³⁺ ions is of significance for near ultraviolet pumped white light‐emitting diodes and solid‐state lighting. It is also noted that the position of the charge transfer state of Eu³⁺ ions shifts towards the higher energy side (blue shift) by increasing the content of Eu³⁺ ions. The predominant emissions of Eu³⁺ ions under 394 nm excitation are observed at 580, 593, 614, 656 and 708 nm, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3 and 4), respectively. The PL results reveal that the optimal content of the red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ phosphors is x = 0.475. Simulation of the white light excited by 394 nm near ultraviolet light has also been carried out for its potential white light‐emitting diode applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnesium methoxide‐induced chemiluminescent decomposition of bicyclic dioxetanes bearing a 2′‐alkoxy‐2‐hydroxy‐1,1′‐binaphthyl‐7‐yl moiety

Bicyclic dioxetanes 2a–c bearing a 2′‐alkoxy‐2‐hydroxy‐1,1′‐binaphthyl‐7‐yl moiety were effectively synthesized and their base‐induced chemiluminescent decomposition was investigated by the use of alkaline metal (Na⁺ and K⁺) or Mg²⁺ alkoxide in MeOH. When 2a–c were treated with tetrabutylammonium fluoride (TBAF) in dimethyl sulfoxide (DMSO) as a reference system, they showed chemiluminescence as a flash of orange light (maximum wavelength λ_max^CL = 573–577 nm) with efficiency Φ^CL = 6–8 × 10^–2. On the other hand, for an alkaline metal (Na⁺ or K⁺) alkoxide/MeOH system, 2a–c decomposed slowly to emit a glow of chemiluminescence, the spectra of which were shifted slightly toward red from the TBAF/DMSO system, and Φ^CL (= 1.4–2.3 × 10^–3) was considerably decreased. In addition, Mg(OMe)₂ was found to play a characteristic role as a base for the chemiluminescent decomposition of 2a–c through coordination to the intermediary oxidoaryl‐substituted dioxetanes 13. Thus, Mg²⁺ increased Φ^CL to more than twice those with Na⁺ or K⁺, while it shifted λ_max^CL considerably toward blue (λ_max^CL = 550–566 nm). Copyright © 2012 John Wiley & Sons, Ltd.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of a novel fluorescent probe based on 7‐nitrobenzo‐2‐oxa‐1,3‐diazole skeleton for the rapid determination of vitamin B12 in pharmaceuticals

A new fluorescent probe, 4‐N,N‐di(2‐hydroxyethyl)imino‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (HINBD) was synthesized in a single step with reasonably good yield. The water‐soluble HINBD emits strongly in the visible region (λ_ex = 479 nm, λ_em = 545 nm) and is stable over a wide range of pH values. It was found that vitamin B₁₂ (VB₁₂) had the ability to quench the fluorescence of HINBD, and the quenched fluorescence intensity was proportional to the concentration of VB₁₂. A method for VB₁₂ determination based on the quenching fluorescence of HINBD was thus established. Interference effects of various substances, including sugars, vitamins, amino acids, inorganic cations and some organic substances have been studied. Under optimal conditions, the linear range is 0.0–2.4 × 10^–5 mol/L. The determination limit is 8.3 × 10^–8 mol/L. The method was applied to measure VB₁₂ in pharmaceutical preparations with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of blue luminescent bipolar materials constructed with carbazole and anthracene units with 4‐cyanophenyl substitute at the 9‐position of the carbazole unit

With carbazole and p‐cyanobromobenzene as raw materials, 4‐(3,6‐di (anthracen‐9‐yl)‐9H‐carbazol‐9‐yl)benzonitrile (DACB) and 4‐(3,6‐bis(anthracene ‐9‐ylethynyl)‐9H‐carbazol‐9‐yl)benzonitrile (BACB) were synthesized through the Suzuki coupling reaction and the Sonogashira coupling reaction, respectively. These structures were characterized using ¹H nuclear magnetic resonance (NMR), elemental analysis and mass spectrometry. Their thermal properties, ultraviolet–visible (UV‐vis) absorption, fluorescence emission, fluorescence quantum yields and electrochemical properties were also investigated systematically. In addition, a electroluminescence (EL) device was made with BACB as the emitting layer and performance of the EL device was studied. Results showed that: (1) the temperature points with 5% and 10% of DACB weight loss were 443°C and 461°C, respectively, and were 475°C and 506°C with BACB weight loss of 5% and 10%, respectively. When the temperature was 50?300°C, no significantly thermal transition was observed which suggested that they had excellent thermal stability. (2) DACB and BACB had single emission peaks at 415 nm, and 479 nm with fluorescence quantum yields of 0.61 and 0.87, respectively, indicating that both compounds could emit strong blue light. (3) According to electrochemical measurement on BACB and DACB, their gaps were 3.07 eV and 2.76 eV, respectively, which further showed that these two compounds were very stable and acted as efficient blue light materials. (4) The turn‐on voltage of the device was 5 V, and the device emitted dark blue light with Commission Internationale de L'Eclairage (CIE) coordinates of (0.157, 0.079).     

High Efficiency Photocatalytic Water Splitting Using 2D α‐Fe2O3/g‐C3N4 Z‐Scheme Catalysts

Photocatalysis is the most promising method for achieving artificial photosynthesis, but a bottleneck is encountered in finding materials that could efficiently promote the water splitting reaction. The nontoxicity, low cost, and versatility of photocatalysts make them especially attractive for this application. This study demonstrates that small amounts of α‐Fe₂O₃ nanosheets can actively promote exfoliation of g‐C₃N₄, producing 2D hybrid that exhibits tight interfaces and an all‐solid‐state Z‐scheme junction. These nanostructured hybrids present a high H₂ evolution rate >3 × 10⁴ µmol g^‐1 h^‐1 and external quantum efficiency of 44.35% at λ = 420 nm, the highest value so far reported among the family of g‐C₃N₄ photocatalysts. Besides effectively suppressing the recombination of electron–hole pairs, this Z‐scheme junction also exhibits activity toward overall water splitting without any sacrificial donor. The proposed synthetic route for controlled production of 2D g‐C₃N₄‐based structures provides a scalable alternative toward the development of highly efficient and active photocatalysts.     

2‐(4‐Ethoxy phenyl)‐4‐phenyl quinoline organic phosphor for solution processed blue organic light‐emitting diodes

This paper reports the synthesis and characterization of 2‐(4‐ethoxyphenyl)‐4‐phenyl quinoline (OEt‐DPQ) organic phosphor using an acid‐catalyzed Friedlander reaction and the preparation of blended thin films by molecularly doping OEt‐DPQ in poly(methyl methacrylate) (PMMA) at different wt%. The molecular structure of the synthesized phosphor was confirmed by Fourier transform infra‐red (FTIR) spectroscopy and nuclear magnetic resonance spectra (NMR). Surface morphology and percent composition of the elements were assessed by scanning electron microscopy (SEM) and energy dispersive analysis of X‐rays (EDAX). The thermal stability and melting point of OEt‐DPQ and thin films were probed by thermo‐gravimetric analysis (TGA)/differential thermal analysis (DTA) and were found to be 80°C and 113.6°C, respectively. UV–visible optical absorption spectra of OEt‐DPQ in the solid state and blended films produced absorption bands in the range 260–340 nm, while photoluminescence (PL) spectra of OEt‐DPQ in the solid state and blended thin films demonstrated blue emission that was registered at 432 nm when excited at 363–369 nm. However, solvated OEt‐DPQ in chloroform, tetrahydrofuran or dichloromethane showed a blue shift of 31–43 nm. Optical absorption and emission parameters such as molar extinction coefficient (ε), energy gap (E_g), transmittance (T), reflectance (R), refractive index (n), oscillator energy (E₀) and oscillator strength (f), quantum yield (φ_f), oscillator energy (E₀), dispersion energy (E_d), Commission Internationale de l'Éclairage (CIE) co‐ordinates and energy yield fluorescence (E_F) were calculated to assess the phosphor's suitability as a blue emissive material for opto‐electronic applications such as organic light‐emitting diodes (OLEDs), flexible displays and solid‐state lighting technology.     

Synthesis and photophysical properties of 1,2‐diphenylindolizine derivatives: fluorescent blue‐emitting materials for organic light‐emitting device

New blue‐emitting materials based on 1,2‐diphenylindolizine were designed and synthesized through a microwave‐assisted Suzuki coupling reaction. The photophysical, electrochemical, and thermal properties of the 1,2‐diphenylindolizine derivatives were investigated using UV–visible and fluorescence spectroscopy, cyclic voltammetry, thermogravimetric analysis, and differential scanning calorimetry. The 1,2‐diphenylindolizine derivatives had band gaps of 3.1–3.4 eV and indicated proper emission of around 450 nm without significant difference between in solution and thin solid film. The indolizine derivatives show an enhanced thermal stability (?T_m > 100 °C), compared with 1,2‐diphenylindolizine. These results suggest the 1,2‐diphenylindolizine derivatives are suitable for blue‐emitting materials in organic light‐emitting devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Low‐Cost N,N′‐Bicarbazole‐Based Dopant‐Free Hole‐Transporting Materials for Large‐Area Perovskite Solar Cells

Despite the recent unprecedented development of efficient dopant‐free hole transporting materials (HTMs) for high‐performance perovskite solar cells (PSCs) on small‐area devices (≤0.1 cm²), low‐cost dopant‐free HTMs for large‐area PSCs (≥1 cm²) with high power conversion efficiencies (PCEs) have rarely been reported. Herein, two novel HTMs, 3,3′,6,6′ (or 2,2′,7,7′)‐tetrakis(N,N′‐di‐p‐methoxyphenylamine)‐N,N′‐bicarbazole (3,6 BCz‐OMeTAD or 2,7 BCz‐OMeTAD), are synthesized via an extremely simple route from very cheap raw materials. Owing to their excellent film‐forming abilities and matching energy levels, 3,6 BCz‐OMeTAD and 2,7 BCz‐OMeTAD can be successfully employed as a perfect ultrathin (≈30 nm) hole transporting layer in large‐area PSCs up to 1 cm². The 3,6 BCz‐OMeTAD and 2,7 BCz‐OMeTAD based large‐area PSCs show highest PCEs up to 17.0% and 17.6%, respectively. More importantly, high performance large‐area PSCs based on 2,7 BCz‐OMeTAD retain 90% of the initial efficiency after 2000 h storage in an ambient environment without encapsulation.     

Luminescence properties of red‐emission Mg4Nb2O9:Eu3+ phosphor

Red‐emitting Mg₄Nb₂O₉:Eu³⁺ phosphor is synthesized via a solid‐state reaction method in air, and its crystal structure and luminescence are investigated. The phosphor can be excited efficiently by ~ 395 nm light, coupled well with a ~ 395 nm near‐ultraviolet chip and emits red light at ~ 613 nm with sharp spectra due to ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion. Mg₄Nb₂O₉:Eu³⁺ phosphor sintered at 1350 ºC shows Commission international de I'Eclairage (CIE) chromaticity coordinates of x = 0.6354, y = 0.3592, and is a potential red‐emitting phosphor candidate for white light‐emitting diodes (W‐LEDs) under ~ 395 nm near‐ultraviolet LED chip excitation. Copyright © 2014 John Wiley & Sons, Ltd.     

Eu3+‐tetrakis β‐diketonate complexes for solid‐state lighting application

Eu³⁺–β‐diketonate complexes are used, for example, in solid‐state lighting (SSL) or light‐converting molecular devices. However, their low emission quantum efficiency due to water molecules coordinated to Eu³⁺ and low photostability are still problems to be addressed. To overcome such challenges, we synthesized Eu³⁺ tetrakis complexes based on [Q][Eu(tfaa)₄] and [Q][Eu(dbm)₄] (Q1 = C₂₆H₅₆N⁺, Q2 = C₁₉H₄₂N⁺, and Q3 = C₁₇H₃₈N⁺), replacing the water molecules in the tris stoichiometry. The tetrakis β‐diketonates showed desirable thermal stability for SSL and, under excitation at 390 nm, they displayed the characteristic Eu³⁺ emission in the red spectral region. The quantum efficiencies of the dbm complexes achieved values as high as 51%, while the tfaa complexes exhibited lower quantum efficiencies (28–33%), but which were superior to those reported for the tris complexes. The structures were evaluated using the Sparkle/PM7 model and comparing the theoretical and the experimental Judd–Ofelt parameters. [Q1][Eu(dbm)₄] was used to coat a near‐UV light‐emitting diode (LED), producing a red‐emitting LED prototype that featured the characteristic emission spectrum of [Q1][Eu(dbm)₄]. The emission intensity of this prototype decreased only 7% after 30 h, confirming its high photostability, which is a notable result considering Eu³⁺ complexes, making it a potential candidate for SSL.     

Blue excitable green emitting Ce3+ doped CaS phosphor for w‐LEDs

CaS:Ce³⁺ is an efficient green‐emitting (535 nm) phosphor, excitable with blue light (450–470 nm) and was synthesized via a solid‐state reaction method by heating under a reducing atmosphere. The luminescent properties, photoluminescent (PL) excitation and emission of the phosphor were analyzed by spectrofluorophotometry. The excitation and emission peaks of the CaS:Ce³⁺ phosphor lay in the visible region, which made them relevant for light‐emitting diode (LED) application for the generation of white light. Judd‐Oflet parameters were calculated and revealed that green light emitted upon blue illumination. The prepared phosphor had strong blue absorption at 470 nm and a broad green emission band range from 490–590 nm with the peak at 537 nm. The characteristics of the CaS:Ce³⁺ phosphor make it suitable for use as a wavelength tunable green emitting phosphor for three band white LEDs pumped by a blue LED (470 nm). The Commission International de l'Eclairage co‐ordinates were calculated by a spectrophotometric method using the spectral energy distribution (0.304, 0.526) and confirm the green emission. The potential application of this phosphor is as a phosphor‐converted white light‐emitting diode. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel blue‐emitting SrMg2Al16O27:Eu2+ phosphor for solid‐state lighting

Eu²⁺‐activated SrMg₂Al₁₆O₂₇ novel phosphor was synthesized by a combustion method (550°C furnace). The prepared phosphor was first characterized by X‐ray diffraction (XRD) for confirmation of phase purity. SEM analysis showed the morphology of the phosphor. The photoluminescence characteristics showed broad‐band excitation at 324 nm, which was monitored at 465 nm emission wavelength. The SrMg₂Al₁₆O₂₇:Eu²⁺ phosphor shows broad blue emission centred at 465 nm, emitting a blue light corresponding to 4f⁶5d¹ → 4f⁷ transition. Here we report the photoluminescence characteristics of the prepared phosphor and compare it with commercial BAM:Eu²⁺ phosphor. Copyright © 2011 John Wiley & Sons, Ltd.     

Resolution of Enantiomers of Novel C2‐Symmetric Aminobisphosphinic Acids via Diastereomeric Salt Formation With Quinine

C₂‐symmetric N,N‐bis(phosphinomethyl)amines were prepared by the thermal reaction of aromatic aldehydes with ammonia and hypophosphorus acid as previously described. Both enantiomers of C₂‐symmetric N,N‐bis(phosphinomethyl)amine were obtained in a high enantiomeric purity through the diastereomeric salt formation with (–)‐quinine, and subsequent fractional crystallization. X‐ray crystallographic analysis of one of the diastereomeric salts clearly revealed that (–)‐quinine could be an efficient resolving agent for obtaining the single enantiomer (R,R)‐N,N‐bis(phosphinomethyl)amine. Chirality 27:71–74, 2015. © 2014 Wiley Periodicals, Inc.     

Optical characterization and the energy level scheme for Ce3+‐doped BaY2Si3O10 blue‐emitting phosphor

A series of Ce³⁺‐activated blue‐emitting phosphors BaY₂Si₃O₁₀ (BYSO) was designed and synthesized by a conventional solid‐state method. Upon ultraviolet light (250–370 nm) excitation, the obtained phosphors showed an intense blue emission band centered at 400–427 nm depending on doping concentration, and corresponding to the 5d→4f transition of Ce³⁺. The effects of doping concentration on crystal structure, emitting color, photoluminescence and photoluminescence excitation spectra, as well as the concentration quenching mechanism were studied in detail. The optimal doping concentration of Ce³⁺ in this phosphor was demonstrated to be about 0.75% and the concentration quenching mechanism can be ascribed to electric dipole–dipole interactions with a critical distance of ~38 Å. These fine luminescence properties indicate that BYSO:Ce³⁺ may be a potential blue phosphor for full‐color ultra‐violet (UV) white light emitting diodes (WLEDs).     

Determination of manganese‐ and manganese‐containing fungicides with lucigenin–Tween‐20‐enhanced chemiluminescence detection

A flow‐injection (FI) method is reported for the determination of Mn(II), maneb and mancozeb fungicides based on the catalytic effect of Mn(II) on the oxidation of lucigenin and dissolved oxygen in a basic solution. The Tween‐20 surfactant has been reported for first time to enhance lucigenin chemiluminescence (CL) intensity in the presence of Mn(II) (53%) and maneb and mancozeb (89%). The calibration graphs were linear in the concentration range of 0.001–1.5 mg L^–1 (R² = 0.9982 (n = 11) with a limit of detection (S/N = 3) of 0.1 µg L^–1 for Mn(II) and 0.01–3.0 mg L^–1 [R² = 0.9989 and R² = 0.9992 (n = 6)] with a limit of detection (S/N =3) of 1.0 µg L^–1 for maneb and mancozeb respectively. Injection throughputs of 90 and 120 h^–1 for Mn(II) and maneb and mancozeb respectively, and relative standard deviations of 1.0–3.4% were obtained in the concentration range studied. The experimental variables, e.g., reagents concentrations, flow rates, sample volume, and photomultiplier tube voltage, were optimized and potential interferences were investigated. The analysis of Mn(II) in river water reference materials (SLRS‐4 and SLRS‐5) showed good agreement with the certified values incorporating an on‐line 8‐hydroxyquinoline chelating column in the manifold for removing interfering metal ions. Recoveries for maneb and mancozeb were in the range of 92 ± 5 to 104 ± 3% and 91 ± 2 to 100 ± 4% (n = 3) respectively. The effect of 30 other pesticides (fungicides, herbicides and insecticides) was also examined in the lucigenin–Tween‐20 CL system. Copyright © 2015 John Wiley & Sons, Ltd.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of high quantum yield and oscillator strength 6‐chloro‐2‐(4‐cynophenyl)‐4‐phenyl quinoline (cl‐CN‐DPQ) organic phosphor for solid‐state lighting

A novel blue luminescent 6‐chloro‐2‐(4‐cynophenyl) substituted diphenyl quinoline (Cl‐CN DPQ) organic phosphor has been synthesized by the acid‐catalyzed Friedlander reaction and then characterized to confirm structural, optical and thermal properties. Structural properties of Cl‐CN‐DPQ were analyzed by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) spectroscopy, X‐ray diffraction technique (XRD) and scanning electron microscopy (SEM) and energy dispersive analysis of X‐ray (EDAX) spectroscopy. FTIR spectra confirmed the presence of different functional groups and bond stretching. ¹H–NMR and ¹³C–NMR confirmed the formation of an organic Cl‐CN‐DPQ compound. X‐ray diffraction study provided its crystalline nature. The surface morphology of Cl‐CN‐DPQ was analyzed by SEM, while EDAX spectroscopy revealed the elemental analysis. Differential thermal analysis (TGA/DTA) disclosed its thermal stability up to 250°C. The optical properties of Cl‐CN‐DPQ were investigated by UV–vis absorption and photoluminescence (PL) measurements. Cl‐CN‐DPQ exhibits intense blue emission at 434 nm in a solid‐state crystalline powder with CIE co‐ordinates (0.157, 0.027), when excited at 373 nm. Cl‐CN‐DPQ shows remarkable Stokes shift in the range 14800–5100 cm^?1, which is the characteristic feature of intense light emission. A narrow full width at half‐maximum (FWHM) value of PL spectra in the range 42–48 nm was observed. Oscillator strength, energy band gap, quantum yield, and fluorescence energy yield were also examined using UV–vis absorption and photoluminescence spectra. These results prove its applications towards developing organic luminescence devices and displays, organic phosphor‐based solar cells and displays, organic lasers, chemical sensors and many more.