Aptasensor for amplified IgE sensing based on fluorescence quenching by graphene oxide

Water‐soluble graphene oxide (GO) with a two‐dimensional layered nanostructure was synthesized and used as a quencher to construct a highly sensitive and selective fluorescence resonance energy transfer (FRET) aptasensor for sensing Immunoglobulin E (IgE). The fluorescein isothiocyanate (FITC)‐labeled aptamer could be adsorbed stably onto the surface of GO via π → π stacking interaction, which led to the occurrence of FRET from FITC to GO, and the fluorescence of FITC‐labeled aptamer was quenched by GO via energy transfer. In the presence of IgE, the fluorescence was recovered due to a higher affinity between the aptamer and IgE compared with interactions between GO and the aptamer, leading to a high signal‐to‐background ratio. The fluorescence intensity of the aptamer increased in proportion to the amount of IgE in the sample,so that IgE could be detected with a linear range of 60–225 pM and a detection limit of 22 pM. The assay was highly selective because the aptamer was unaffected by the presence of immunoglobulin G (IgG), human serum albumin (HSA) and bovine serum albumin (BSA). The practical application of the proposed aptasensor was successfully carried out for the determination of IgE in human serum samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoluminescence profiles and fast/slow annealing effects of Eu(III)/Tb(III)‐codoped silica phosphor materials

A silica (SiO₂) nanoparticle matrix was codoped with luminescent Eu(III) and Tb(III) ions using a modified Stöber method. The effects of fast and slow thermal annealing on photoluminescence profile imaging were examined. Slow annealing treatment suppressed more quenching sites than fast thermal annealing to further increase the photoluminescence signals. The photoluminescence signals observed between 450 and 720 nm were assigned to the ⁵D₀ → ⁷F_J (J = 0,1,2,3,4) of Eu(III) and the ⁵D₄ → ⁷F_J (J = 6,5,4,3) transitions of Tb(III). Photoluminescence was largely sensitized by indirect excitation and was much stronger than that generated by direct excitation. The Eu(III) and Tb(III) ions were doped at lower symmetry sites in the silica matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

A new quaternary photoluminescence enhancement system of Eu−N‐(o‐vanillin)‐1,8‐diaminonaphthalene−1,10‐phenanthroline−Zn and its application in determining trace amounts of europium and zinc

A new sensitive quaternary photoluminescence enhancement system has been successfully developed to determine trace amounts of Eu³⁺ and Zn²⁺. The photoluminescence intensity of Eu ? N‐(o‐vanilin)‐1,8‐diaminonaphthalene systems was greatly increased by the addition of specific concentrations of 1, 10‐phenanthroline and Zn²⁺. The excitation and emission wavelengths were 274 and 617 nm, respectively. Under optimal system conditions, the photoluminescence intensity showed a linear response toward Eu³⁺ in the range of 5.0 × 10^–6 ~ 2.0 × 10^–5 M with a limit of detection (= 2.2 × 10^–9 M) and the photoluminescence intensity of the system decreased linearly by increasing the Zn²⁺ concentration in the range of 5.0 × 10^–8 ~ 1.0 × 10^–6 M with a limit of detection (= 8.8 × 10^–11 M). This system was successfully applied for the determination of trace amounts of Eu³⁺ in a high purity La₂O₃ matrix and in the synthetic rare earth oxide mixture, and of Zn²⁺ in a high purity Mg(NO₃)₂ · 6H₂O matrix and in synthetic coexisting ionic matrixes. The energy transfer mechanism, photoluminescence enhancement of the system and interference of other lanthanide ions and common coexisting ions were also studied in detail. Copyright © 2013 John Wiley & Sons, Ltd.     

Sulfur and nitrogen co‐doped graphene quantum dot‐assisted chemiluminescence for sensitive detection of tryptophan and mercury (II)

A simple one‐step thermal treatment to prepare strong fluorescent sulfur and nitrogen co‐doped graphene quantum dots (SN‐GQD) using citric acid and l ‐cysteine as precursors was developed. The ultra‐weak chemiluminescence (CL) from the reaction of hydrogen peroxide (H₂O₂) and periodate (IO₄^?) was significantly enhanced by SN‐GQD in acidic medium. The enhanced CL was induced by excited‐state SN‐GQD (SN‐GQD*), which was produced from the transfer energy of (O₂)₂* and ¹O₂ to SN‐GQD and recombination of oxidant‐injected holes and electrons in SN‐GQD. In the presence of tryptophan (Trp), the CL intensity of the SN‐GQD–H₂O₂–KIO₄ system was greatly diminished. This finding was used to design a novel method for determination of Trp in the linear range 0.6–20.0 μM, with a limit of detection (LOD) of 58.0 nM. Furthermore, Hg²⁺ was detectable in the range 0.1–9.0 μM with a LOD of 64.0 nM, based on its marked enhancement of the SN‐GQD–H₂O₂–KIO₄ CL system. The proposed method was successfully applied to detect Trp in milk and human plasma samples and Hg²⁺ in drinking water samples, with recoveries in the range 95.7–107.0%.     

Kinetic simulation studies on the transient formation of the oxo‐iron(IV) porphyrin radical cation during the reaction of iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)‐porphyrin with hydrogen peroxide in aqueous solution

High‐valent oxo‐iron(IV) species are commonly proposed as the key intermediates in the catalytic mechanisms of iron enzymes. Water‐soluble iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)porphyrin (Fe(III)TMPyP) has been used as a model of heme‐enzyme to catalyse the hydrogen peroxide (H₂O₂) oxidation of various organic compounds. However, the mechanism of the reaction of Fe(III)TMPyP with H₂O₂ has not been fully established. In this study, we have explored the kinetic simulation of the reaction of Fe(III)TMPyP with H₂O₂ and of the catalytic reactivity of FeTMPyP in the luminescent peroxidation of luminol. According to the mechanism that has been established in this work, Fe(III)TMPyP is oxidized by H₂O₂ to produce (TMPyP)^·+Fe(IV)=O (k1 = 4.5 × 10⁴/mol/L/s) as a precursor of TMPyPFe(IV)=O. The intermediate, (TMPyP)^·+Fe(IV)=O, represented nearly 2% of Fe(III)TMPyP but it does not accumulate in suf?cient concentration to be detected because its decay rate is too fast. Kinetic simulations showed that the proposed scheme is capable of reproducing the observed time courses of FeTMPyP in various oxidation states and the decay pro?les of the luminol chemiluminescence. It also shows that (TMPyP)^·+Fe(IV)=O is 100 times more reactive than TMPyPFe(IV)=O in most of the reactions. These two species are responsible for the initial sharp and the sustained luminol emissions, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Trimethylamine N‐oxide as a risk marker for ischemic stroke in patients with atrial fibrillation

Trimethylamine N‐oxide (TMAO) is an independent risk factor of cardiovascular disease. Our objective was to explore the relation between TMAO and ischemic stroke (IS) in patients with atrial fibrillation (AF). A total of 68 patients with AF with IS and 111 ones without IS were enrolled. The plasma levels of TMAO remarkably increased in IS‐AF patients (8.25 ± 1.58 µM) compared with patients with AF (2.22 ± 0.09 µM, P < 0.01). The receiver operating characteristic analysis revealed that the best cutoff value of TMAO to predict IS in patients with AF was 3.53 µM with 75.0% sensitivity and 92.8% specificity (area under the curve: 0.917, 95% confidence intervals: 0.877‐0.957). Univariate and multivariate logistic regression analysis showed that TMAO was an independent predictor in IS. The level of TMAO was correlated with the CHA2DS2‐VASc score. In conclusion, TMAO was an independent predictor of IS, which could potentially refine stroke stratification in patients with AF.     

Disproportionation of hydroxylamine by water-soluble iron(III) porphyrinate compounds

The reactions of hydroxylamine (HA) with several water-soluble iron(III) porphyrinate compounds, namely iron(III) meso-tetrakis-(N-ethylpyridinium-2yl)-porphyrinate ([Fe^III(TEPyP)]⁵⁺), iron(III) meso-tetrakis-(4-sulphonatophenyl)-porphyrinate ([Fe^III(TPPS)]³⁻), and microperoxidase 11 ([Fe^III(MP11)]) were studied for different [Fe^III(Porph)]/[HA] ratios, under anaerobic conditions at neutral pH. Efficient catalytic processes leading to the disproportionation of HA by these iron(III) porphyrinates were evidenced for the first time. As a common feature, only N₂ and N₂O were found as gaseous, nitrogen-containing oxidation products, while NH₃ was the unique reduced species detected. Different N₂/N₂O ratios obtained with these three porphyrinates strongly suggest distinctive mechanistic scenarios: while [Fe^III(TEPyP)]⁵⁺ and [Fe^III(MP11)] formed unknown steady-state porphyrinic intermediates in the presence of HA, [Fe^III(TPPS)]³⁻ led to the well characterized soluble intermediate, [Fe^II(TPPS)NO]⁴⁻. Free-radical formation was only evidenced for [Fe^III(TEPyP)]⁵⁺, as a consequence of a metal centered reduction. We discuss the catalytic pathways of HA disproportionation on the basis of the distribution of gaseous products, free radicals formation, the nature of porphyrinic intermediates, the Fe^II/Fe^III redox potential, the coordinating capabilities of each complex, and the kinetic analysis. The absence of revealed either that no HAO-like activity was operative under our reaction conditions, or that , if formed, was consumed in the reaction milieu.     

Carbon-13 nuclear magnetic resonance spectroscopy of high-spin iron(III) prophyrin compounds

¹³C nuclear magnetic resonance spectra have been obtained for variety of high-spin iron(III) porphyrin compounds and corresponding μ-oxo-bridged dimeric species. Large hyperfine shifts and significant line broadening are observed. The monomeric exhibit hyperfine shifts which are downfield with te exception of an upfield shift for the meso-carbon atom. Possible unpaired spin delocalization mechanisms and prospects for observing ¹³C NMR porphyrin resonances in high-spin ferrihemoproteins are discussed. Spectra reported here provide strategy for incorporation of ¹³C labels in hemoproteins either by biosynthetic or chemical means. The vinyl-CH₂ resonances of iron(III) protoporphyrin IX located 260 parts per million downfield from tetramethylsilane are especially attractive from the standpoint of chemical labeling.     

Peptide purification using the chemoselective reaction between N‐(methoxy)glycine and isothiocyanato‐functionalized resin

An efficient peptide purification strategy is established, comprising the selective reaction of an N‐terminal N‐(methoxy)glycine residue of the peptide and isothiocyanato‐functionalized resins, and subsequent Edman degradation. These reactions take place in acidic media; in particular, the Edman degradation proceeds smoothly in media containing more than 50% trifluoroacetic acid (v/v). These acidic conditions offer increased solubility, making them advantageous for the purification of hydrophobic and aggregation‐prone peptides. The effectiveness of this method, together with scope and limitations, is demonstrated using model peptides and the practical purification of the loop region of the human dopamine D2 receptor long isoform (residues 240–272). Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Effect of γ‐irradiation on thermal and thermoluminescence properties of polystyrene/europium (III) oxide composite film

In the present study, polystyrene:europium (III) oxide polymer films at a ratio of 95:5 wt% were prepared using a solution casting technique. These polymeric films were irradiated with 5, 25 and 50 kGy γ‐radiation doses and their thermoluminescence (TL) and thermal properties were studied as a function of radiation dose. Analysis of Fourier transform infrared spectra revealed different modes of vibration and polymer–filler interaction. Reduction of vibrational modes with radiation dose was observed. The TL glow curve intensity was observed to increase with increasing radiation dose and to become broader in the 378 K and 444 K regions. Detrapping of electrons implied by the glow curve was caused by thermally induced macromolecular motion, concurrent with β‐relaxation in polystyrene. The TL glow curve parameters were computed using a glow curve deconvolution method. Differential scanning calorimetry analysis indicated that the glass transition temperature (T_g) increased with increase in dose, suggesting crosslinking of the polymer chain. Scanning electron microscopy analysis evidenced the change in surface morphology due to γ‐irradiation.     

Fabrication and investigation of gold (III) ion‐imprinted functionalized silica particles

Au (III) ion‐imprinted mesoporous silica particles (Au‐Si‐Py) was manufactured by the condensation reaction of (3‐Aminopropyl)triethoxysilane (AT)and 2‐pyridinecarboxaldehyde (Py). The obtained AT‐Py Schiff base ligand was then coordinate with the template gold ions and the polymerizable gold‐complex was allowed to gel in presence of tetraethoxysilane (TEOS) and then the coordinated gold ions were leached out of the obtained silica matrix using acidified thiourea solution. During the synthetic steps, the obtained materials were investigated utilizing advanced instrumental and spectral methods. Moreover, the morphological structure of both Au (III) ions imprinted Au‐Si‐Py and non‐imprinted NI‐Si‐Py silica particles were visualized using scanning electron microscope (SEM). Various adsorption experiments had been carried out using both Au‐Si‐Py and NI‐Si‐Py to examine their potential for selective extraction of gold ions under different conditions     

A chemiluminescence method to detect hydroquinone with water‐soluble sulphonato‐(salen)manganese(III) complex as catalyst

A water‐soluble sulphonato‐(salen)manganese(III) complex with excellent catalytic properties was synthesized and demonstrated to greatly enhance the chemiluminescence signal of the hydrogen peroxide ? luminol reaction. Coupled with flow‐injection technique, a simple and sensitive chemiluminescence method was first developed to detect hydroquinone based on the chemiluminescence system of the hydrogen peroxide–luminol–sulphonato‐(salen)manganese(III) complex. Under optimal conditions, the assay exhibited a wide linear range from 0.1 to 10 ng mL^–1 with a detection limit of 0.05 ng mL^–1 for hydroquinone. The method was applied successfully to detect hydroquinone in tap‐water and mineral‐water, with a sampling frequency of 120 times per hour. The relative standard deviation for determination of hydroquinone was less than 5.6%, and the recoveries ranged from 96.8 to 103.0%. The ultraviolet spectra, chemiluminescence spectra, and the reaction kinetics for the peroxide–luminol–sulphonato‐(salen)manganese(III) complex system were employed to study the possible chemiluminescence mechanism. The proposed chemiluminescence analysis technique is rapid and sensitive, with low cost, and could be easily extended and applied to other compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Prebiotic sugar synthesis: Hexose and hydroxy acid synthesis from glyceraldehyde catalyzed by iron(III) hydroxide oxide

Summary Iron(III) hydroxide oxide [Fe(OH)O] efficiently catalyzed the condensation of 25 MM dl-glyceraldehyde to ketohexoses at 25°C (pH 5–6). At 16 days the yields were sorbose (15.2%), fructose (12.9%), psicose (6.1%), tagatose (5.6%), and dendroketose (2.5%) with 19.6% of triose unreacted. Analysis at 96 days showed no decomposition of hexoses. Under these conditions Fe(OH)O also catalyzed the isomerization and rearrangement of glyceraldehyde to dihydroxyacetone and lactic acid, respectively. In these reactions, about 10% of the glyceraldehyde was oxidized to glyceric acid with concurrent reduction of the iron(III) to iron(II). The partial reduction of Fe(OH)O did not noticeably reduce its ability to catalyze hexose synthesis. The relationship of these results to prebiotic sugar synthesis is discussed.     

Enantiomeric NMR signal separation behavior and mechanism of samarium(III) and neodymium(III) complexes with (S,S)‐ethylenediamine‐N,N'‐disuccinate

Enantiomeric ¹H and ¹³C NMR signal separation behaviors of various α‐amino acids and DL‐tartarate were investigated by using the samarium(III) and neodymium(III) complexes with (S ,S )‐ethylenediamine‐N ,N' ‐disuccinate as chiral shift reagents. A relatively smaller concentration ratio of the lanthanide(III) complex to substrates was suitable for the neodymium(III) complex compared with the samarium(III) one, striking a balance between relatively greater signal separation and broadening. To clarify the difference in the signal separation behavior, the chemical shifts of β‐protons for fully bound D‐ and L‐alanine (δ_b(D) and δ_b(L)) and their adduct formation constants (K s) were obtained for both metal complexes. Preference for D‐alanine was similarly observed for both complexes, while it was revealed that the difference between the δ_b(D) and δ_b(L) values is the significant factor to determine the enantiomeric signal separation. The neodymium(III) and samarium(III) complexes can be used complementarily for higher and smaller concentration ranges of substrates, respectively, because the neodymium(III) complex gives the larger difference between the δ_b(D) and δ_b(L) values with greater signal broadening compared to the samarium(III) complex.     

Effect of thermal annealing on the structural and optical properties of tris‐(8‐hydroxyquinoline)aluminum(III) (Alq3) films

Tris‐(8‐hydroxyquionoline)aluminum (Alq₃) was synthesized and coated on to a glass substrate using the dip coating method. The structural and optical properties of the Alq₃ film after thermal annealing from 50°C to 300°C in 50° steps was studied. The films have been prepared with 2 to 16 layers (42–324 nm). The thickness and thermal annealing of Alq₃ films were optimized for maximum luminescence yield. The Fourier transform infrared spectrum confirms the formation of quinoline with absorption in the region 700 ? 500/cm. Partial sublimation and decomposition of quinoline ion was observed with the Alq₃ films annealed at 300°C. The X‐ray diffraction pattern of the Alq₃ film annealed at 50°C to 150°C reveals the amorphous nature of the films. The Alq₃ film annealed above 150°C were crystalline nature. Film annealed at 150°C exhibits a photoluminescence intensity maximum at 512 nm when excited at 390 nm. The Alq₃ thin film deposited with 10 layers (220 nm) at 150°C exhibited maximum luminescence yield. Copyright © 2014 John Wiley & Sons, Ltd.     

Iron(III) hydroxamate transport of Escherichia coli: restoration of iron supply by coexpression of the N- and C-terminal halves of the cytoplasmic membrane protein FhuB cloned on separate plasmids

Summary Transport of iron(III) hydroxamates across the inner membrane into the cytoplasm of Escherichia coli cells is mediated by the FhuC, FhuD and FhuB proteins. We studied the extremely hydrophobic FhuB protein (70 kDa) which is located in the cytoplasmic membrane. The N- and C-terminal halves of the protein [FhuB(N) and FhuB(C)] show homology to each other and to the equivalent polypeptides involved in uptake of ferric dicitrate and of vitamin B₂. Various plasmids carrying only one-half of the fhuB gene were expressed in fhuB ^– mutants. Only combinations of FhuB(N) and FhuB(C) polypeptides restored sensitivity to albomycin and growth on iron hydroxamates as sole iron source; no activity was obtained with either half of FhuB alone. These results indicate that both halves of FhuB are essential for substrate translocation and that they combine to form an active permease when expressed separately. In addition, a FhuB derivative with a large internal duplication of 271 amino acids was found to be partially active in transport, indicating that the extra portion did not perurb proper insertion of the active FhuB segments into the cytoplasmic membrane.     

Ethylene production,cluster root formation,and localization of iron(III) reducing capacity in Fe deficient squash roots

Dicots and non-graminaceous monocots have the ability to increase root iron(III) reducing capacity in response to iron (Fe) deficiency stress. In squash (Cucurbita pepo L.) seedlings, Fe(III) reducing capacity was quantified during early vegetative growth. When plants were grown in Fe-free solution, the Fe(III) reducing capacity was greatly elevated, reached peak activity on day 4, then declined through day 6. Root ethylene production exhibited a temporal pattern that closely matched that of Fe(III) reducing capacity through day 6. On the 7th day of Fe deficiency, cluster root morphology developed, which coincided with a sharp increase in the root Fe(III) reducing capacity, although ethylene production decreased. Localization of Fe(III) reducing capacity activity was observed during the onset of Fe deficiency and through the development of the root clusters. It was noted that localization shifted from an initial pattern which occurred along the main and primary lateral root axes, excluding the apex, to a final localization pattern in which the reductase appeared only on secondary laterals and cluster rootlets. This revised version was published online in June 2006 with corrections to the Cover Date.     

A specific transporter for iron(III)-phytosiderophore in barley roots

Iron acquisition of graminaceous plants is characterized by the synthesis and secretion of the iron-chelating phytosiderophore, mugineic acid (MA), and by a specific uptake system for iron(III)-phytosiderophore complexes. We identified a gene specifically encoding an iron-phytosiderophore transporter (HvYS1) in barley, which is the most tolerant species to iron deficiency among graminaceous plants. HvYS1 was predicted to encode a polypeptide of 678 amino acids and to have 72.7% identity with ZmYS1, a first protein identified as an iron(III)-phytosiderophore transporter in maize. Real-time RT-PCR analysis showed that the HvYS1 gene was mainly expressed in the roots, and its expression was enhanced under iron deficiency. In situ hybridization analysis of iron-deficient barley roots revealed that the mRNA of HvYS1 was localized in epidermal root cells. Furthermore, immunohistological staining with anti-HvYS1 polyclonal antibody showed the same localization as the mRNA. HvYS1 functionally complemented yeast strains defective in iron uptake on media containing iron(III)-MA, but not iron-nicotianamine (NA). Expression of HvYS1 in Xenopus oocytes showed strict specificity for both metals and ligands: HvYS1 transports only iron(III) chelated with phytosiderophore. The localization and substrate specificity of HvYS1 is different from those of ZmYS1, indicating that HvYS1 is a specific transporter for iron(III)-phytosiderophore involved in primary iron acquisition from soil in barley roots.     

Octanuclear iron(III) complexes supported by Kemp’s tricarboxylate ligands

Reactions of FeCl₂·4H₂O and diimino ligand (L) with H₃kta (cis,cis-1,3,5-trimethylcyclohexane-1,3,5-tricarboxylic acid) in the presence of [ⁿBu₄N][OH] afforded a series of octanuclear iron(III) complexes formulated as [Fe₈O₅(kta)₂(Hkta)₄(L)₂] (L = bpy (1), 5,5′-Me₂bpy (2), 4,4′-Me₂bpy (3), phen (4), 4-Mephen (5), 4,7-Me₂phen (6), and 3,4,7,8-Me₄phen (7)). The structure of 4 was determined by X-ray crystallography to consist of a planar {Fe₈(μ₄-O)(μ₃-O)₄}¹⁴⁺ core supported by two kta³⁻ tricarboxylates, where the inner four Fe^III ions form a {Fe₄O₅} square plane, of which apex μ-oxo atoms are further connected to the outer four Fe^III ions. The peripheral part of the Fe₈ core is bridged by four Hkta²⁻ ligands and chelated by two phen ligands. ⁵⁷Fe Mössbauer spectra of 2 at 290 K and 77 K indicated the presence of high-spin octahedral Fe(III) ions, and the temperature dependent dc magnetic susceptibility data for 1, 2, and 4 showed strong antiferromagnetic exchange in the {Fe₈O₅} moiety.     

Effect of substituents on complex stability aimed at designing new iron(III) and aluminum(III) chelators

The solution equilibria of iron(III) and aluminum(III) with two classes of hard ligands (catechol, salicylic acid and their nitro-derivatives) have been reliably studied by potentiometric, spectrophotometric and NMR spectroscopy. The effect of the nitro substituent on the binding properties of catechol and salicylic acid has been examined thoroughly. The inductive and resonance properties of the substituent that, as expected, lower the basicity of the phenolic and carboxylic groups, lead to a general decrease in both protonation and complex formation constants. This decrease causes an increase in pM of between 0.2 and 1.1 pM units for the nitro-substituted salicylates and of about 4 units for 4-nitrocatechol, with a significantly higher chelating efficacy. The influence of the substituent on catechol and salicylic acid is discussed in detail on the basis of conditional constants at pH 7.4.