Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescent properties of Eu3+‐Eu2+ activated MAl2SixO2x + 4 (M = Mg,Ca, Sr,Ba) phosphors prepared in air

In this paper, MAl₂Si_xO_2x+4:Eu²⁺/Eu³⁺ (Eu²⁺ + Eu³⁺ = 2%, molar ratio; M = Mg, Ca, Sr, Ba; x = 0, 0.5, 1, 1.5, 2) phosphors with different SiO₂ concentrations (the ratio of SiO₂ to MAl₂O₄ is n%, n = 0, 50, 100, 150, 200, respectively) were prepared by high‐temperature solid‐state reaction under atmospheric air conditions. Their structures and photoluminescent properties were systematically researched. The results indicate that Eu³⁺ ions have been reduced and Eu²⁺ ions are obtained in air through the self‐reduction mechanism. The alkaline earth metal ions and doping SiO₂ strongly affect the crystalline phase and photoluminescent properties of samples, including microstructures, relative intensity of Eu²⁺ to Eu³⁺, location of emission lines/bands. It is interesting and important that the emission color and intensities of europium‐doped various phosphors which consist of aluminosilicate matrices prepared under atmospheric air conditions could be modulated by changing the kinds of alkaline earth metal and the content of SiO₂.     

Synthesis and luminescence properties of a blue-emitting Sr(3.5) Y(6.5) O(2) (PO(4) )(1.5) (SiO(4) )(4.5) :Eu(2+) phosphor

A novel blue‐emitting Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:Eu²⁺ phosphor was synthesized via a solid‐state reaction. Powder X‐ray diffraction (XRD) analysis demonstrated that the Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5 host had a hexagonal crystal structure in the space group P6₃/m and unit cell parameters a = 9.418 Å, c = 6.900 Å. The as‐prepared phosphor showed a blue emission and all the main emission peaks were located at around 466 nm for different excitation wavelengths of 297, 333 and 391 nm. The temperature dependence of the photoluminescence property was investigated in the range 20–250 °C, and the emission intensity decreased to 71% of the initial value at room temperature on increasing the temperature to 150 °C. According to the classical theory of fluorescent thermal quenching, the activation energy (ΔE) for the thermal quenching luminescence of the as‐prepared Sr_3.45Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:0.05Eu²⁺ phosphor was determined to be 0.20 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence behavior of Li2Sr1‐3x/2EuxSiO4 red phosphors for LED applications

Red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ 0≤x≤0.5) phosphors were synthesized at 900°C in air by a solid‐state reaction. The synthesized phosphors were characterized by X‐ray powder diffraction, photoluminescence (PL) excitation (PLE) and PL spectra. The results from the PLE spectra suggest that the strong 394 nm excitation peak associated with the ⁵L₆ state of Eu³⁺ ions is of significance for near ultraviolet pumped white light‐emitting diodes and solid‐state lighting. It is also noted that the position of the charge transfer state of Eu³⁺ ions shifts towards the higher energy side (blue shift) by increasing the content of Eu³⁺ ions. The predominant emissions of Eu³⁺ ions under 394 nm excitation are observed at 580, 593, 614, 656 and 708 nm, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3 and 4), respectively. The PL results reveal that the optimal content of the red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ phosphors is x = 0.475. Simulation of the white light excited by 394 nm near ultraviolet light has also been carried out for its potential white light‐emitting diode applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of (Y,Gd)BO3:RE (RE = Eu3+, Ce3+, Dy3+ and Tb3+) phosphors for blue chip and near‐UV white LEDs

A series of Eu³⁺‐, Ce³⁺‐, Dy³⁺‐ and Tb³⁺‐doped (Y,Gd)BO₃ phosphors was synthesized by a solid‐state diffusion method. X‐Ray diffraction confirmed their hexagonal structure and the scanning electron microscopy results showed crystalline particles. The excitation spectra revealed that (Y,Gd)BO₃ phosphors doped with Eu³⁺, Ce³⁺ , Dy³⁺ and Tb³⁺ are effectively excited with near UV‐light of 395 nm/blue light, 364, 351 and 314 nm, respectively. Photoluminescence spectra of Eu³⁺‐, Ce³⁺‐ and Tb³⁺/Dy³⁺‐doped phosphor showed intense emission of reddish orange, blue and white light, respectively. The phosphor Y_0.60Gd_0.38BO₃:Ce_0.02 showed CIE 1931 color coordinates of (0.158, 0.031) and better color purity compared with commercially available blue BAM:Eu²⁺ phosphor. The phosphor (Y,Gd)BO₃ doped with Eu³⁺, Dy³⁺ and Tb³⁺ showed CIE 1931 color coordinates of (0.667, 0.332), (0.251, 0.299) and (0.333, 0.391) respectively. Significant photoluminescence characteristics of the prepared phosphors indicate that they might serve as potential candidates for blue chip and near‐UV white light‐emitting diode applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescent properties of novel BaGd2O4:Eu3+ scintillating phosphor

BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors were synthesized at 1300°C in air by conventional solid‐state reaction method. Phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE) spectra, photoluminescence (PL) spectra and thermoluminescence (TL) spectra. Optimal PL intensity for BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors at 276 nm excitation were found to be x = 0.24 and y = 0.125, respectively. The PL intensity of Eu³⁺ emission could only be enhanced by 1.3 times with incorporation of Na⁺ into the BaGd₂O₄ host. Enhanced luminescence was attributed to the flux effect of Na⁺ ions. However, when BaGd₂O₄:Eu³⁺ phosphors were codoped with Na⁺ ions, the induced defects confirmed by TL spectra impaired the emission intensity of Eu³⁺ ions. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel red‐emitting phosphor,KAl1‐xPO4Cl:Eux3+ (0.1 ≤ x ≤ 1.0)

A series of phosphors KAl_1‐xPO₄Cl:Eu_x³⁺ (0.1 ≤ x ≤ 1.0) was synthesized using a facile combustion method using urea as a fuel and their structural, morphological and photoluminescence properties were investigated. It was found that the particle size was in the range of 1–2 µm with an irregular shape. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicated that this phosphor can be efficiently excited by ultraviolet (395 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J = 0, 1, 2) transitions of Eu³⁺. The impact of the Eu³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration is 0.5. The present study suggests that the KAl_0.5PO₄Cl: Eu_0.5³⁺ phosphor is a strong candidate as a red component for phosphor‐ converted white light‐emitting diodes (LEDs). Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of rare earth elements (Y,Gd and Lu) on the luminescent properties of green phosphor ZnMoO4:Tb3+

(Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) were prepared using the co‐precipitation method. Phase impurity, morphology and composition were investigated by power X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The experimental results show that crystal structure is not destroyed after doping an appropriate amount of Y³⁺, Gd³⁺ and Lu³⁺. EDS analysis reveals that Y, Gd and Lu have been successfully doped into ZnMoO₄. In addition, the morphology of the phosphors is notably improved, exhibiting homogeneous dispersion morphology and irregular shapes of particle size ~ 0.5–1 µm. The luminescent intensity of (Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) phosphor is obviously higher than that of ZnMoO₄:Tb³⁺ phosphor. The energy transfer process between trivalent rare earth ions indicates that the inert earth ions can act as an energy bridge from MoO₄^2‐ to Tb³⁺. Copyright © 2013 John Wiley & Sons, Ltd.     

Photoluminescence properties of LiTi2 − xEux(PO4)3 phosphor

A solid‐state reaction route‐based LiTi_{2 ? x}Eu_x(PO₄)₃ was phosphor synthesized for the first time to evaluate its luminescence performance by excitation, emission and lifetime (τ) measurements. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was excited at λ_exci. = 397 nm to give an intense orange–red (597 nm) emission attributed to the ⁵D₀ → ⁷F₁ magnetic dipole (ΔJ = ±1) transition and red (616 nm) emission (⁵D₀ → ⁷F₂), which is an electric dipole (ΔJ = ±2) transition of the Eu³⁺ ion. Beside this, excitation and emission spectra of host LiTi₂(PO₄)₃ powder were also reported. The effect of Eu³⁺ concentration on luminescence characteristics was explained from emission and lifetime profiles. Concentration quenching in the LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was studied from the Dexter's model. Dipole–quadrupole interaction is found to be responsible for energy transfer among Eu³⁺ ions in the host lattice. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor displayed a reddish‐orange colour realized from a CIE chromaticity diagram. We therefore suggest that this new phosphor could be used as an optical material of technological importance in the field of display devices. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence enhancement of (Sr1–xMx)2SiO4:Eu2+ phosphors with M (Ca2+/Zn2+) partial substitution for white light‐emitting diodes

Eu²⁺‐doped Sr₂SiO₄ phosphor with Ca²⁺/Zn²⁺ substitution, (Sr_1–xM_x)₂SiO₄:Eu²⁺ (M = Ca, Zn), was prepared using a high‐temperature solid‐state reaction method. The structure and luminescence properties of Ca²⁺/Zn²⁺ partially substituted Sr₂SiO₄:Eu²⁺ phosphors were investigated in detail. With Ca²⁺ or Zn²⁺ added to the silicate host, the crystal phase could be transformed between the α‐form and the β‐form of the Sr₂SiO₄ structure. Under UV excitation at 367 nm, all samples exhibit a broad band emission from 420 to 680 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions. The broad emission band consists of two peaks at 482 and 547 nm, which correspond to Eu²⁺ ions occupying the ten‐fold oxygen‐coordinated Sr.(I) site and the nine‐fold oxygen‐coordinated Sr.(II) site, respectively. The luminescence properties, including the intensity and lifetime of Sr₂SiO₄:Eu²⁺ phosphors, improved remarkably on Ca²⁺/Zn²⁺ addition, and promote its application in white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Vanadate‐Based Materials for Li‐Ion Batteries: The Search for Anodes for Practical Applications

While the practical application of electrode materials depends intensively on the Li⁺ ion storage mechanisms correlating ultimately with the coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling, only intercalation‐type electrode materials have proven viable for commercialization up to now. This paper reviews the promising anode materials of metal vanadates (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni, Li) that have high capacity, low cost, and abundant resource, and also discusses the related Li⁺ ion storage mechanism. It is concluded that most of these (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni) exhibit irreversible redox reactions upon lithiation/delithiation accompanied by large volume expansion, which is not favorable for industrial applications. In particular, Li₃VO₄ with specific intercalation Li⁺ ion storage mechanism and compatible merits of safety and energy density exhibits great potential for practical application. This review systematically summarizes the latest progress in Li₃VO₄ research, including the representative fabrication approaches for advanced morphology and state‐of‐the‐art technologies to boost performance and the morphology variation associated with Li⁺ ion storage mechanisms. Furthermore, an outlook on where breakthroughs for Li₃VO₄ may be most likely achieved will be provided.     

Tunable emission from LiBaBO3:Eu3+;Bi3+ phosphor for solid‐state lighting

Europium (Eu³⁺) and bismuth (Bi³⁺) co‐activated LiBaBO₃ powder phosphors were synthesized by a solid‐state reaction and the structure, particle morphology, optical and photoluminescent properties were investigated. X‐Ray diffraction patterns of the LiBaBO₃ phosphors crystallized in a pure monoclinic phase, i.e. there were no secondary phases due to either incidental impurities or undecomposed starting materials. Scanning electron microscopy images showed that the powders were made up of fluffy needle‐like particles that were randomly aligned. The band‐gap of the LiBaBO₃ host was estimated to be 3.33 eV from the UV/vis absorption data. Blue emission was observed from the LiBaBO₃ host, which is ascribed to self‐activation of the host matrix. In addition, greenish‐blue (493 nm) and red (613 nm) emissions were observed from europium‐doped samples and were attributed to the emissions of Eu²⁺ and Eu³⁺, respectively. Furthermore, after codoping with Bi³⁺, the emission intensity of Eu³⁺ located at 613 nm was significantly enhanced. From the Commission Internationale de I′Eclairage (CIE) color coordinates, white emission was observed from LiBa_1–xBO₃:xEu³⁺ (x = 0.020 and 0.025) phosphor powders with color coordinates of x = 0.368, y = 0.378 and x = 0.376, y = 0.366, respectively.     

Luminescent properties of sol–gel processed red‐emitting phosphor Ca0.6Sr0.4–1.5x‐0.5yMo0.4 W0.6O4:EuxLiy

A series of red‐emitting phosphors Ca_0.6Sr_{0.4–1.5x‐0.5y}Mo_0.4 W_0.6O₄:Eu_xLi_y (x = 0.02–0.12, y = 0–0.12) has been synthesized by a sol‐gel method. The effects of calcining temperature, concentrations of Li⁺ and Eu³⁺, and compensation ions on the luminescent properties were investigated. X‐ray diffraction and scanning electron microscopic results showed that as‐prepared phosphors were of single phase with several microns. The Li⁺ compensated compositions showed remarkably intense red emission at 619 nm. The emission intensity of the series reached maximum for compositions at x = 0.08 and y = 0.08 when the calcining temperature was 900 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of temperature on Na2Sr(PO4)F:Eu3+ phosphor

In this article, we report the synthesis of Na₂Sr_1‐x(PO₄)F:Eu_x phosphor via a combustion method. The influence of different annealing temperatures on the photoluminescence properties was investigated. The phosphor was excited at both 254 and 393 nm. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors emit strong orange and red color at 593 and 612 nm, respectively, under both excitation wavelengths. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors annealed at 1050°C showed stronger emission intensity compared with 600, 900 and 1200°C. Moreover, Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphor was found to be more intense when compared with commercial Y₂O₃:Eu³⁺ phosphor. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural and luminescence properties of Y2‐xGeMoO8:REx (RE = Eu,Tb) phosphors

Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors were synthesized using a facile sol–gel method. The morphology and structure of the phosphors were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD); while their luminescent properties were investigated by photoluminescence (PL) spectrometry. Our results reveal that all of these Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors adopted the tetragonal phase, belonging to Scheelite (CaWO₄) structure. The obtained YGeMoO₈:Eu phosphors exhibit a strong emission in the red light range which can be assigned to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ when it is excited at 459 nm. Under 392 and 489 nm excitation, the YGeMoO₈:Tb phosphors present predominant green emission (⁵D₄ → ⁷F₅) at 540 nm. The highest emission of the phosphors can be achieved by adjusting the doping concentration to be 0.25 for Eu³⁺ and 0.15 for Tb³⁺, respectively. The promising luminescence properties of these materials indicate that they can be potentially applied to white‐light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and optical properties of Eu3+‐substituted glaserite‐type orthovanadates CsK2Y[VO4]2

A new Eu³⁺‐substituted CsK₂Y[VO₄]₂ glaserite‐type orthovanadate phosphor was synthesized by the conventional high temperature solid‐state reaction method. The phase purity was confirmed by powder X‐ray diffraction study and it reveals that all the compositions crystallize in the hexagonal structure. The morphology and elemental composition were measured by FE‐SEM with Energy Dispersive Analysis Of X Rays (EDAX). The band gap is determined by diffuse reflectance spectra. The self‐activated luminescence of the host and Eu³⁺‐substituted luminescence behaviours were studied in detail by photoluminescence spectra. The host CsK₂Y[VO₄]₂ shows green emission, whereas the Eu³⁺‐substituted compositions show red emission. Effect of Eu³⁺ concentrations on the photoluminescence behaviour were also been studied. The Eu³⁺‐doped samples show not only several sharp emission lines but also a broad emission band due to presence of the [VO₄]^3? in the host, which clearly indicates that there is incomplete energy transfer from (VO₄) charge transfer band to Eu³⁺_. The life time of the phosphors also been studied. The Commission Internationale de l'Eclairage (CIE) chromaticity colour coordinates were calculated and it is very much closer to the National Television Standard Committee (NTSC) standards. These investigations evidently reveal that the self‐activated and Eu³⁺‐activated phosphors show a great potential applications as a red phosphor for solid‐state lighting includes white light‐emitting diodes (wLEDs).