Luminescent properties of sol–gel processed red‐emitting phosphor Ca0.6Sr0.4–1.5x‐0.5yMo0.4 W0.6O4:EuxLiy

A series of red‐emitting phosphors Ca_0.6Sr_{0.4–1.5x‐0.5y}Mo_0.4 W_0.6O₄:Eu_xLi_y (x = 0.02–0.12, y = 0–0.12) has been synthesized by a sol‐gel method. The effects of calcining temperature, concentrations of Li⁺ and Eu³⁺, and compensation ions on the luminescent properties were investigated. X‐ray diffraction and scanning electron microscopic results showed that as‐prepared phosphors were of single phase with several microns. The Li⁺ compensated compositions showed remarkably intense red emission at 619 nm. The emission intensity of the series reached maximum for compositions at x = 0.08 and y = 0.08 when the calcining temperature was 900 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Sol‐gel synthesis and luminescent properties of red‐emitting Y(P,V)O4:Eu3+ phosphors

Eu³⁺‐activated Y(P,V)O₄ phosphors were prepared by the EDTA sol‐gel method, and the corresponding morphologies and luminescent properties were investigated. The sample particles were relatively spheroid with size of 2–3 µm and had a smooth surface. The excitation spectra for Y(P,V)O₄:Eu³⁺ consisted of three strong excitation bands in the 200–350 nm range, which were attributed to a Eu³⁺‐ O^2? charge‐transfer band and ¹A₁?¹ T₁/¹ T₂ transitions in VO₄^3?. The as‐synthesized phosphors exhibited a highly efficient red luminescence at 613 nm due to the Eu^{3+ 5}D₀?⁷ F₂ electric dipole transition. With the increase in the V⁵⁺/P⁵⁺ ratio, the luminescence intensity of the red phosphor under UV excitation was greatly improved due to enhanced VO₄^3? → Eu³⁺ energy transfer. Copyright © 2015 John Wiley & Sons, Ltd.     

Orange light‐emitting Ca3Mg3(PO4)4:Sm3+ phosphors

This work reports the photoluminescence properties of Ca₃Mg₃(PO₄)₄:Sm³⁺ phosphors that were synthesized by the combustion method. The phase formation and morphology of the prepared phosphors were analysed by X‐ray diffraction studies and scanning electron microscopy. Ca₃Mg₃(PO₄)₄:Sm³⁺ phosphors give orange light emission when excited by near‐ultraviolet (NUV) and blue light. The photoluminescence characteristics of the as‐prepared phosphors were investigated and their emission spectra showed three peaks due to ⁴G_5/2 → ⁶H_5/2, ⁴G_5/2 → ⁶H_7/2 and ⁴G_5/2 → ⁶H_9/2 transitions. The mechanism responsible for the concentration quenching of luminescence was found to be an electric dipole–dipole interaction. The CIE chromaticity coordinates suggested that the prepared phosphors are potential candidates for orange light‐emitting diodes (LEDs).     

A novel reddish‐orange phosphor,NaLi2PO4:Eu3+

A series of Eu³⁺‐activated NaLi₂PO₄ novel phosphors was synthesized by the solid‐state reaction method. The X‐ray diffraction (XRD) and photoluminescence (PL) properties of these phosphors were investigated at room temperature. The excitation spectra indicate that these phosphors can be effectively excited by near‐UV (370–410 nm) light. The emission spectra exhibit strong reddish‐orange performance, which is due to the ⁵D₀ → ⁷F_J transitions of Eu³⁺ ions. The orange emission from transition ⁵D₀ → ⁷F₁ is dominant over that of ⁵D₀ → ⁷F_2. The concentration quenching of Eu³⁺ was observed in NaLi₂PO₄:Eu³⁺ when the Eu concentration was at 1 mol%. The impact of doping Eu³⁺ and photoluminescence properties were investigated and we propose a feasible interpretation. Copyright © 2012 John Wiley & Sons, Ltd.     

Impact of temperature on Na2Sr(PO4)F:Eu3+ phosphor

In this article, we report the synthesis of Na₂Sr_1‐x(PO₄)F:Eu_x phosphor via a combustion method. The influence of different annealing temperatures on the photoluminescence properties was investigated. The phosphor was excited at both 254 and 393 nm. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors emit strong orange and red color at 593 and 612 nm, respectively, under both excitation wavelengths. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors annealed at 1050°C showed stronger emission intensity compared with 600, 900 and 1200°C. Moreover, Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphor was found to be more intense when compared with commercial Y₂O₃:Eu³⁺ phosphor. Copyright © 2013 John Wiley & Sons, Ltd.     

Sol–gel preparation and luminescent properties of red‐emitting phosphor Sr‐Ba‐Mo‐W‐O‐(Eu3+,Sm3+)

Two series of red‐emitting phosphors Sr‐Ba‐Mo‐W‐O:Eu,Sm and Sr‐Ba‐Mo‐W‐O:Eu have been synthesized by a sol–gel method. The effects of the chemical composition, concentrations of Sm³⁺ and Eu³⁺, the Sr²⁺/Ba²⁺ ratio, and the W⁶⁺/Mo⁶⁺ ratio on the luminescent properties were investigated. The as‐prepared phosphors were characterized by X‐ray diffraction and Raman spectra. Results showed that single phases of the two series were prepared. The compositions of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 had the strongest luminescent intensity. The excitation spectra of Sm³⁺, Eu³⁺ co‐doped phosphors were broader and the strongest peak moved to 404 nm when compared with that of Eu³⁺ single‐doped phosphors. The luminescent intensity of the Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 at 618 nm were 2.8 times greater than that of Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10. The luminescent intensity of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 at 150 °C decreased to 56.8% and 50.3% of the initial value at room temperature, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence investigation of novel MgPbAl10O17:Tb3+ green‐emitting phosphor for solid‐state lighting

In this work, we studied the luminescence properties of Tb³⁺‐doped MgPbAl₁₀O₁₇ green phosphor. To understand the excitation mechanism and corresponding emission of the prepared phosphor, its structural, morphological and photoluminescence properties were investigated. In general, for green emission, Tb³ is used as an activator and the obtained excitation and emission spectra indicated that this phosphor can be effectively excited by a wavelength of 380 nm, and exhibits bright green emission centered at 545 nm corresponding to the f → f transition of trivalent terbium ions. The chromaticity coordinates were (C_x = 0.263, C_y = 0.723). The impact of Tb³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration was found to be 2 mol%. This study suggests that Tb³⁺‐doped MgPbAl₁₀O₁₇ phosphor is a strong candidate for a green component in phosphor‐converted white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of a new orange–red‐emitting Sm3+–La3SbO7 phosphor

The antimonate compound La₃SbO₇ has high chemical stability, lattice stiffness and thermal stability. Orange–red‐emitting antimonate‐based phosphors La₃SbO₇:xSm³⁺ (x = 0.02, 0.05, 0.08, 0.10, 0.15, 0.20 and 0.25) were synthesized. The phase structure and photoluminescence properties of these phosphors were investigated. The emission spectrum obtained on excitation at 407 nm contained exclusively the characteristic emissions of Sm³⁺ at 568, 608, 654 and 716 nm, which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 of Sm³⁺, respectively. The strongest emission was located at 608 nm due to the ⁴G_5/2→⁶H_7/2 transition of Sm³⁺, generating bright orange–red light. The critical quenching concentration of Sm³⁺ in La₃SbO₇:Sm³⁺ phosphor was determined as 10% and the energy transfer between Sm³⁺ was found to be through an exchange interaction. The International Commission on Illumination chromaticity coordinates of the La₃SbO₇:0.10Sm³⁺ phosphors are located in the orange–red region. The La₃SbO₇:Sm³⁺ phosphors may be potentially used as red phosphors for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties of single‐phase Ba2‐x‐1.5y‐1.5zP2O7:xEu2+,yCe3+, zTb3+ phosphors for white light‐emitting diode

A series of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors was synthesized via a co‐precipitation method, then their crystal structure, quantum efficiency and luminescent properties were analyzed by XRD and FL, respectively. The results showed that these phosphors not only presented the excitation characteristics of Ba₂P₂O₇:xEu²⁺,zTb³⁺, but also exhibited that of the Ba₂P₂O₇:yCe³⁺,zTb³⁺ phosphor. Meanwhile, the tri‐doped phosphor showed a stronger absorption around 320 nm in contrast with the Eu²⁺/Ce³⁺:Tb³⁺ co‐doped phosphor. Not only can energy transfer from Ce³⁺→Eu²⁺ be observed; the energy transfer mechanism from Eu²⁺ to Tb³⁺ is discussed in the tri‐doped system. Ce³⁺ affects the luminescence properties of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors just as the sensitizer whereas Eu²⁺ is considered both as the sensitizer and the activator. The chromaticity coordinates of tri‐doped phosphors excited at 320 nm stayed steadily in the bluish‐white light region,and the emitted color and color temperature (CCT) of these phosphors could be tuned by adjusting the relative contents of Eu²⁺, Ce³⁺ and Tb³⁺. Hence, the single phase Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors may be considered as potential candidates for white light‐emitting diodes.     

Synthesis and photoluminescence characteristics of Sm3+‐doped Bi4Si3O12 red‐emitting phosphor

A series of novel red‐emitting Sm³⁺‐doped bismuth silicate phosphors, Bi₄Si₃O₁₂:xSm³⁺ (0.01 ≤ x ≤ 0.06), were prepared via the sol–gel route. The phase of the synthesized samples calcinated at 800 °C is isostructural with Bi₄Si₃O₁₂ according to X‐ray diffraction results. Under excitation with 405 nm light, some typical peaks of Sm³⁺ ions centered at 566, 609, 655 and 715 nm are found in the emission spectra of the Sm³⁺‐doped Bi₄Si₃O₁₂ phosphors. The strongest peak located at 609 nm is due to ⁴G_5/2–⁶H_7/2 transition of Sm³⁺. The luminescence intensity reaches its maximum value when the Sm³⁺ ion content is 4 mol%. The results suggest that Bi₄Si₃O₁₂:Sm³⁺ may be a potential red phosphor for white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of blue‐emitting phosphor Ca12Al14O32F2:Eu2+ for white light‐emitting diode

A blue‐emitting phosphor Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ was synthesized using a high‐temperature solid‐state reaction under a reductive atmosphere. The X‐ray diffraction measurements indicate that a pure phase Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ can be obtained for low doping concentration of Eu²⁺. The phosphor has a strong absorption in the range 270–420 nm with a maximum at ~340 nm and blue emission in the range 400–500 nm with chromatic coordination of (0.152, 0.045). The optimal doping concentration is ~0.24. In addition, the luminescence properties of the as‐synthesized phosphor were evaluated by comparison with those of Ca₁₂Al₁₄O₃₂Cl₂:Eu²⁺ and the commercially available phosphor BaMgAl₁₀O₁₇:Eu²⁺. The emission intensity of Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ was ~72% that of BaMgAl₁₀O₁₇:Eu²⁺ under excitation at λ = 375 nm. The results indicate that Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ has potential application as a near‐UV‐convertible blue phosphor for white light‐emitting diodes.     

Photoluminescence,cathodoluminescence and thermal stability of Sm3+‐activated Sr3La(VO4)3 red‐emitting phosphors

A series of Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors were synthesized by a facile sol‐gel method. X‐ray diffraction patterns and photoluminescence (PL)/cathodoluminescence (CL) spectra as well as PL decay curves were employed to characterize the obtained samples. Upon 402 nm light excitation, the characteristic emissions of Sm³⁺ ions corresponding to ⁴G_5/2→⁶H_J transitions were observed in all the as‐prepared products. The PL emission intensity was increased with increase in Sm³⁺ ion concentration, while concentration quenching occurred when the doping concentration was over 4 mol%. The non‐radiative energy transfer mechanism for concentration quenching of Sm³⁺ ions was dominated by dipole–dipole interaction and the critical distance was around 21.59 Å. Furthermore, temperature‐dependent PL emission spectra revealed that the obtained phosphors possessed good thermal stability with an activation energy of 0.19 eV. In addition, the CL spectra of the samples were almost the same as the PL spectra, and the CL emission intensity showed a tendency to increase with increase in accelerating voltage and filament current. These results suggest that the Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors with good color coordinates, high color purity and superior thermal stability may be a potential candidate for applications in white light‐emitting diodes and field‐emission displays as red‐emitting phosphors.     

Photoluminescence properties of LiBaPO4:M3+ phosphor for near‐UV light‐emitting diode (M = Eu and Dy)

A novel phosphor LiBaPO₄ doped with rare earths Eu and Dy prepared by high temperature solid‐state reaction method is reported. The phosphors were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorophotometer. The excitation spectra of LiBaPO₄:Eu³⁺ phosphor can be efficiently excited by 394 nm, which is matched well with the emission wavelength of near‐UV light‐emitting diode (LED) chip. PL properties of Eu³⁺‐doped LiBaPO₄ exhibited the characteristic red emission coming from ⁵D₀ → ⁷ F₁ (593 nm) and ⁵D₀ → ⁷ F₂ (617 nm) electronic transitions with color co‐ordinations of (0.680, 0.315). The results demonstrated that LiBaPO₄:Eu³⁺ is a potential red‐emitting phosphor for near‐UV LEDs. Emission spectra of LiBaPO₄:Dy³⁺ phosphors showed efficient blue (481 nm) and yellow (574 nm) bands, which originated from ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of the Dy³⁺ ion, respectively. The 574 nm line is more intense than the 481 nm lines, which indicates that the site Dy³⁺ is located with low symmetry. This article summarizes fundamentals and possible applications of optically useful inorganic phosphates with visible photoluminescence of Eu³⁺ and Dy³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Cation‐tunable blue phosphor Ca2PO4Cl:Eu2+: enhancive emission and site occupancy

A series of blue phosphors Ca_1.98–xM_xPO₄Cl:0.02Eu²⁺ (M = Mg and Sr) with different values of x were synthesized using a high‐temperature solid‐state reaction. X‐Ray diffraction and photoluminescence measurements were used to study the phase structure and luminescence properties. Ca₂PO₄Cl:0.02Eu²⁺ exhibits a tunable emission intensity and color due to the incorporation of Sr²⁺ or Mg²⁺. The incorporation of Sr²⁺ reduces the luminescence intensity and results in a slight red shift in the emission band. The incorporation of Mg²⁺ results in enhanced emission and a clear blue shift in the emission band along with a tunable chromatic coordination. Under excitation at λ = 334 nm, the emission intensity of the Mg²⁺‐doped Ca₂PO₄Cl:0.02Eu²⁺ is found to be 250% that of Ca₂PO₄Cl:0.02Eu²⁺. The luminescence behaviors of the as‐synthesized phosphors are discussed according to the host crystal structure and site occupancy of Eu²⁺. The results indicate that Mg²⁺‐doped Ca₂PO₄Cl:Eu²⁺ is more applicable as a near‐UV‐convertible blue phosphor for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties of novel red‐emitting M7Sn(PO4)6:Eu3+ (M = Sr,Ba) for light‐emitting diodes

Novel red‐emitting phosphors, Eu³⁺‐activated M₇Sn(PO₄)₆ (M = Sr, Ba), were synthesized at 1200°C by conventional solid‐state reaction method. The luminescent properties of M₇Sn(PO₄)₆:Eu³⁺ (M = Sr, Ba) phosphors were investigated, and the critical concentration of the activator (Eu³⁺) concentration were found to be 0.175 mol and 0.21 mol per formula unit for Sr_7‐xSn(PO₄)₆:xEu³⁺ and Ba_7‐xSn(PO₄)₆:xEu³⁺, respectively. These phosphors presented red luminescence under the excitation of 395 or 465 nm, perfectly matching with the emissions wavelength of near‐ultraviolet (UV) light‐emitting diodes (LEDs) and InGaN blue LED.     

Photoluminescence properties of aeschynite‐type LaNbTiO6:RE3+ (RE = Tb,Dy, Ho) down‐converting phosphors

In this study, a series of LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) down‐converting phosphors were synthesized using a modified sol–gel combustion method, and their photoluminescence (PL) properties were investigated as a function of activator concentration and annealing temperature. The resultant particles were characterized using X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, UV/Vis diffuse reflectance spectroscopy and PL spectra. The highly crystalline LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) phosphors with an average size of 200–300 nm obtained at 1100°C have an orthorhombic aeschynite‐type structure and exhibit the highest luminescent intensity in our study range. The emission spectra of LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) phosphors under excitations at UV/blue sources are mainly composed of characteristic peaks arising from the f–f transitions of RE³⁺, including 489 nm (⁵D₄ → ⁷F₆) and 545 nm (⁵D₄ → ⁷F₅) for Tb³⁺, 476 and 482 nm (⁴F_9/2 → ⁶H_15/2) and 571 nm (⁴F_9/2 → ⁶H_13/2) for Dy³⁺, and 545 nm (⁵F₄ + ⁵S₂ → ⁵I₈) for Ho³⁺, respectively. The luminescent mechanisms were further investigated. It can be expected that these phosphors are of intense interest and potential importance for many optical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Combustion synthesis of blue‐emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor

Long persistence phosphor CaAl₄O₇: Eu²⁺, Dy³⁺ were prepared by a combustion method. The phosphors were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl₄O₇: Eu²⁺, Dy³⁺ phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu²⁺ in the host lattices. The lifetime decay curve of the Dy³⁺ co‐doped CaAl₄O₇: Eu²⁺ phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long‐persistent mechanism of CaAl₄O₇:Eu²⁺, Dy³⁺ phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long‐lasting phosphors for the purposes of sign boards and defence. Copyright © 2011 John Wiley & Sons, Ltd.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

A promising RVO4:Eu3+,Li+@SiO2 (R = Gd,Y and Gd/Y) red‐emitting phosphor with improved luminescence (cd/m2) and colour purity for optical display applications

Red emission intensity was optimized in three stages, by investigating the effects of: (i) host composition (Gd, Y and Gd/Y), (ii) codoping Li⁺ as a sensitizer and, finally, (iii) with a SiO₂ shell coating as a protecting layer. Lanthanide vanadate powder phosphors were synthesized using a modified colloidal precipitation technique. The effects of SiO₂ coating on phosphor particles were characterized using scanning electron microscopy (SEM)‐EDAX, transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and photoluminescence (PL) measurements. An improvement in the PL intensity on Li codoping was due to improved crystallinity, which led to higher oscillating strengths for the optical transitions, and also a lowering of the inversion symmetry of Eu³⁺ ions. Red emission intensity due to ⁵D₀ → ⁵D₂ transition of the phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01 was enhanced by 22.28% compared with Y_0.95VO₄:Eu³⁺_0.05, and was further improved by 58.73% with SiO₂ coating. The luminescence intensity (I) and colour coordinates (x, y) of the optimized phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01@SiO₂, where I = 13.07 cd/m² and (x = 0.6721, y = 0.3240), were compared with values for a commercial red phosphor (Y₂O₂S:Eu³⁺), where I = 27 cd/m² and (x = 0.6522, y = 0.3437). The measured colour coordinates are superior to those of the commercial red phosphor, and moreover, match well with standard NTSC values (x = 0.67, y = 0.33). Copyright © 2015 John Wiley & Sons, Ltd.