Detection of the site of contamination by Staphylococcus aureus within the defeathering machinery of a poultry processing plant

Counts of Staphylococcus aureus from samples of neck skin taken from poultry carcasses at different stages of processing showed that the numbers decreased approximately 10-fold during scalding but increased by almost 1000-fold during plucking, reaching up to 10⁴/g. Swab samples taken from the defeathering machinery yielded counts of ca. 10³/swab at the entry to the first plucker but these increased to ca. 10⁷at the exit, with a subsequent decrease through the second and third machines. Counts of other organisms growing on the Baird-Parker isolation medium showed much lower levels at the exit to the first plucker, suggesting that this was the major site of contamination at which S. aureus grew preferentially. Data obtained from four visits to the processing plant over a period of 10 months suggested that the incidence of S. aureus on the birds is affected by the season (summer or winter) whereas levels in the plucking machines depended on the day of sampling.     

Listeria contamination at a poultry processing plant

Escherichia coli grown in broth initially at pH 5.0 (pH 5.0-grown organisms) survived exposure to inorganic acid or to acid pH plus organic acid which prevented subsequent growth by pH 7.0-grown organisms. This resistance of pH 5.0-grown organisms to organic acids was observed at acid pH with lactic, propionic, benzoic, sorbic, trans-cinnamic and acetic acids. Such resistance might allow acid-habituated organisms to survive in acid foods or at body sites such as the urinary tract where organic acids are present at acid pH.     

A model system for the study of microbial colonization in poultry defeathering machines

A model system has been developed to simulate key features of the machinery environment in which feathers are removed from poultry carcasses during commercial processing. The model was designed to facilitate study of factors affecting microbial colonization of the machines, including environmental temperature, available nutrients and microbial competition. It involves a rapidly rotating rubber 'finger' contained in a tank in a laboratory incubator, where the 'finger' is sprayed continuously with a microbial suspension in a blood-faecal extract medium. Attachment of cells of Staphylococcus aureus or Staph. sciuri to the rotating 'finger' was demonstrated over a 6-h period at 28°C.     

Persistence of Escherichia coli in a poultry processing plant

Poultry processing plant equipment was sampled for Escherichia coli either sequentially during single processing runs or once weekly for 6 weeks. The biotyping of the isolations revealed a heterogeneous E. coli population. The majority of biotypes were identified on one occasion only and never on more than three occasions under both sampling regimes. Although a proportion of the biotypes were recovered from equipment after cleaning, it was concluded that thorough cleaning and disinfection procedures should control E. coli contamination of slaughterhouse equipment.     

Use of a newly developed rapid microbial ATP bioluminescence assay to detect microbial contamination on poultry carcasses

A newly developed rapid microbial ATP bioluminescence test (R-mATP) was shown to be an adequate means to assay the microbial load of poultry carcasses. This assay utilizes differential extraction and filtration to separate somatic from microbial ATP in a very rapid timeframe. The assay requires approximately 5 min to complete; approximately 3.5 min to sample and 90 s analytical time. Correlation coefficient (r) between aerobic colony counts and R-mATP test results (n=329) was 0.82. Post-test probabilities to correctly classify carcasses with different levels of microbial contamination were as high as 98% for samples of ≥3.5 log aerobic CFU per ml. Given the rapidity of this assay, the R-mATP holds potential for monitoring the microbial load of carcasses at poultry-processing critical control points. Other potential applications of this new version of the microbial ATP bioluminescence test are discussed.     

An evaluation of Ficoll density gradient centrifugation as a method for eliminating microbial contamination and purifying plant protoplasts

Ficoll density gradient centrifugation was used to generate sterile protoplasts from non-sterile Pteridium cultures. The method was found to drastically reduce levels of fungal and bacterial contamination introduced prior to centrifugation whilst concentrating and purifying protoplasts.     

Molecular diversity and characterization of tetracycline-resistant Staphylococcus aureus isolates from a poultry processing plant

DNA fingerprinting and molecular characterization showed that the tetracycline-resistant Staphylococcus aureus population of a South African poultry processing plant comprised one or possibly several tet(K)-containing endemic clones that contaminated chicken and machinery surfaces at all sampled processing stages. The tet(K) gene was transferable by filter mating to S. aureus recipient 80CR5 and was located on a pT181-like plasmid.     

Control of Listeria spp. by competitive-exclusion bacteria in floor drains of a poultry processing plant

In previous studies workers determined that two lactic acid bacterium isolates, Lactococcus lactis subsp. lactis C-1-92 and Enterococcus durans 152 (competitive-exclusion bacteria [CE]), which were originally obtained from biofilms in floor drains, are bactericidal to Listeria monocytogenes or inhibit the growth of L. monocytogenes both in vitro and in biofilms at 4 to 37 degrees C. We evaluated the efficacy of these isolates for reducing Listeria spp. contamination of floor drains of a plant in which fresh poultry is processed. Baseline assays revealed that the mean numbers of Listeria sp. cells in floor drains sampled on six different dates (at approximately biweekly intervals) were 7.5 log(10) CFU/100 cm(2) for drain 8, 4.9 log(10) CFU/100 cm(2) for drain 3, 4.4 log(10) CFU/100 cm(2) for drain 2, 4.1 log(10) CFU/100 cm(2) for drain 4, 3.7 log(10) CFU/100 cm(2) for drain 1, and 3.6 log(10) CFU/100 cm(2) for drain 6. The drains were then treated with 10(7) CE/ml in an enzyme-foam-based cleaning agent four times in 1 week and twice a week for the following 3 weeks. In samples collected 1 week after CE treatments were applied Listeria sp. cells were not detectable (samples were negative as determined by selective enrichment culture) for drains 4 and 6 (reductions of 4.1 and 3.6 log(10) CFU/100 cm(2), respectively), and the mean numbers of Listeria sp. cells were 3.7 log(10) CFU/100 cm(2) for drain 8 (a reduction of 3.8 log(10) CFU/100 cm(2)), <1.7 log(10) CFU/100 cm(2) for drain 1 (detectable only by selective enrichment culture; a reduction of 3.3 log(10) CFU/100 cm(2)), and 2.6 log(10) CFU/100 cm(2) for drain 3 (a reduction of 2.3 log(10) CFU/100 cm(2)). However, the aerobic plate counts for samples collected from floor drains before, during, and after CE treatment remained approximately the same. The results indicate that application of the two CE can greatly reduce the number of Listeria sp. cells in floor drains at 3 to 26 degrees C in a facility in which fresh poultry is processed.     

植物离体培养中微生物污染的鉴定与控制(综述)

本文综述植物离体培养过程中微生物污染的鉴定与控制的研究进展,包括通过指示培养和菌种鉴别以鉴定污染菌;从保护条件下生长的植株上取材以及材料的预处理,以便有效地控制附生菌和应用抗生素控制内生菌.     

Plasmid profiles as indicators of the source of contamination of Staphylococcus aureus endemic within poultry processing plants

A total of 530 strains of Staphylococcus aureus were isolated from the defeathering machinery of a chicken processing plant and from neck skin samples of carcasses at different stages of processing in two visits 4 weeks apart. Eleven different plasmid profiles were detected in the isolates, eight being common to both visits. The plasmid profiles of the strains forming the majority of the population on the freshly slaughtered birds were rarely present in the strains isolated from the pluckers (except at the entry to the first plucker) and were present in only a small proportion of the strains isolated from carcasses after plucking. However, the profiles from the strains isolated from the pluckers on both visits were different from those forming the majority of the population on the incoming birds but formed the major part of the carcass flora after plucking, suggesting that such strains were endemic. These strains were found as a small proportion of the isolates made from the incoming birds, suggesting that this was the route by which the endemic strains were introduced into the plant. Such endemic strains exhibited a clumping growth, even in liquid shake culture, which may have made it easier for them to become established on the pluckers and to resist cleaning and disinfection. This clumping phenotype was correlated with the presence of a 7.5-megadalton plasmid.     

Environmental microbial contamination in a stem cell bank

AIM: The aim of this study was to evaluate the main environmental microbial contaminants of the clean rooms in our stem cell bank. METHODS AND RESULTS: We have measured the microbial air contamination by both passive and active air sampling and the microbial monitoring of surfaces by means of Rodac plates. The environmental monitoring tests were carried out in accordance with the guidelines of European Pharmacopeia and US Pharmacopeia. The micro-organisms were identified by means of an automated system (VITEK 2). During the monitoring, the clean rooms are continually under good manufacturing practices specifications. The most frequent contaminants were Gram-positive cocci. CONCLUSIONS: The main contaminants in our stem cell bank were coagulase-negative staphylococci and other opportunistic human pathogens. In order to assure the levels of potential contamination in both embryonic and adult stem cell lines, a continuous sampling of air particles and testing for viable microbiological contamination is necessary. SIGNIFICANCE AND IMPACT OF THE STUDY: This study is the first evaluation of the environmental contaminants in stem cell banks and can serve as initial evaluation for these establishments. The introduction of environmental monitoring programmes in the processing of stem cell lines could diminish the risk of contamination in stem cell cultures.     

Bioaerosol emissions in a poultry litter burning plant

This study investigates the exposure of workers to biological particles in a poultry litter burning plant in operation. The microorganism concentrations were examined at different workplaces during procedures leading to increased emissions. The concentrations of culturable airborne mesophilic, xerophilic and thermophilic microorganisms in the ambient air were tested inside and outside of the burning plant using two different methods of measuring. The focus of this study was on the quantitative evaluation of culturable bacteria as well as the quantitative and qualitative evaluation of gram-negative bacteria, fungi and thermophilic actinomycetes. The maximum airborne concentrations were found in the delivery hall. Mesophilic bacteria concentrations reached up to 1.7 × 10⁶ CFU/m³; gram-negative bacteria up to 9.1 × 10² CFU/m³. Fungal propagule concentrations for xerophilic fungi were between 1.2 × 10³ and 2.9 × 10⁴ CFU/m³ and for mesophilic fungi between 4.4 × 10² and 2.9 × 10⁴ CFU/m³. Among fungi, Aspergillus niger, Eurotium herbariorum and Scopulariopsis brevicaulis species were dominant. Thermophilic actinomycetes reached airborne concentrations of 8.7 × 10⁴ CFU/m³, with increased concentrations of the pathogens causing extrinsic allergic alveolitis. The high concentrations of airborne microorganisms in poultry litter burning plants and the potential hazard of the intake of microorganisms including potential pathogens require the introduction of consistent measures in both technical areas and personnel management.     

Plasmid profiles as indicators of the source of contamination of Staphylococcus aureus endemic within poultry processing plants.

A total of 530 strains of Staphylococcus aureus were isolated from the defeathering machinery of a chicken processing plant and from neck skin samples of carcasses at different stages of processing in two visits 4 weeks apart. Eleven different plasmid profiles were detected in the isolates, eight being common to both visits. The plasmid profiles of the strains forming the majority of the population on the freshly slaughtered birds were rarely present in the strains isolated from the pluckers (except at the entry to the first plucker) and were present in only a small proportion of the strains isolated from carcasses after plucking. However, the profiles from the strains isolated from the pluckers on both visits were different from those forming the majority of the population on the incoming birds but formed the major part of the carcass flora after plucking, suggesting that such strains were endemic. These strains were found as a small proportion of the isolates made from the incoming birds, suggesting that this was the route by which the endemic strains were introduced into the plant. Such endemic strains exhibited a clumping growth, even in liquid shake culture, which may have made it easier for them to become established on the pluckers and to resist cleaning and disinfection. This clumping phenotype was correlated with the presence of a 7.5-megadalton plasmid.     

Impact of nightshift work on overweight and abdominal obesity among workers of a poultry processing plant in southern Brazil

The authors examined the associations of shiftwork with overweight and abdominal obesity through a cross-sectional study of 1206 employees 18 to 50 yrs of age who were working on a production line in a poultry processing plant. Night-shift workers (n = 800) were considered exposed, whereas day shiftworkers (n = 406) were considered nonexposed. Overweight was defined as a body mass index ≥ 25 kg/m(2) and abdominal obesity as a waist circumference ≥ 88 cm in women and ≥ 102 cm in men. The mean age of the workers was 30.5 yrs (standard deviation = 8.7 yrs), and 65.2% were women. Nightshift workers compared to dayshift workers showed higher prevalences of overweight (42.2% vs. 34.3%; p=?.020) and abdominal obesity (24.9% vs. 19.5%; p =?.037). After adjusting for sociodemographics, parental overweight status, behavioral characteristics, and sleep characteristics, including hours of sleep, the prevalence ratios for overweight and abdominal obesity were 1.27 (95% confidence interval [ CI]: 1.00-1.61) and 1.45 (95% CI: 1.10-1.92), respectively, for the nightshift workers compared to the dayshift workers. A consistent finding in our study was the independent contribution of night shiftwork to overweight and abdominal obesity among Brazilian workers. Further studies are needed to understand the biological mechanisms involved and the complex behavioral and social adaptations experienced by night-shift workers.