Reduced Ulcerogenic Potential and Antiarthritic Effect of Chitosan–Naproxen Sodium Complexes

The purpose of this research was to address the utility of naproxen sodium–chitosan spray-dried complexes for antiulcer and antiarthritic activities. The cold stress technique was used to examine the ulcerogenic potential of naproxen sodium (NPX) and spray-dried formulations in the different doses. The ulcerations reduced with the dose of spray-dried complexes of naproxen sodium and chitosan. The conspicuous hemorrhagic lesions were visible in the morphological features of the animal treated with naproxen 50 mg/kg (p.o.). Thus, the results suggest that the spray-dried naproxen sodium–chitosan complex (NPXF) was not corrosive to the gastric mucosa at high doses of 50, 100, and 200 mg/kg (p.o.) under stressful conditions. It is evident from the present investigation that NPXF does not possess any ulcerogenic potential in comparison to naproxen which, under stressful conditions, led to the hypersecretion of HCl, culminating to petichial hemorrhages in the gastric mucosa of the animals. The biphasic pattern was observed in the various arthritic parameters. The rise in paw volume, joint diameter, WBC count, arthritis score, and fall in body weight was significantly ameliorated in the animals treated with NPXF (5, 10, and 20 mg/kg, p.o). At the end of the study, slight erythema was visible in the naproxen-treated animals. However, no erythema, redness, or ulcers were visible in the animals treated with NPXF. Thus, the direct compression properties and reduced ulcerogenic activity, combined with the demonstrated solubilizing power and analgesic effect enhancer ability toward the drug, make naproxen sodium–chitosan spray-dried complexes particularly suitable for developing a reduced-dose, fast-release, solid oral dosage form of naproxen.Key words: antiarthritic, chitosan complexes, ulcer     

The Effect of Acid pH Modifiers on the Release Characteristics of Weakly Basic Drug from Hydrophlilic–Lipophilic Matrices

The solubility of weakly basic drugs within passage though GI tract leads to pH-dependent or even incomplete release of these drugs from extended release formulations and consequently to lower drug absorption and bioavailability. The aim of the study was to prepare and evaluate hydrophilic–lipophilic (hypromellose–montanglycol wax) matrix tablets ensuring the pH-independent delivery of the weakly basic drug verapamil-hydrochloride by an incorporation of three organic acidifiers (citric, fumaric, and itaconic acids) differing in their concentrations, pK_a, and solubility. The dissolution studies were performed by the method of changing pH values, which better corresponded to the real conditions in the GI tract (2 h at pH 1.2 and then 10 h at pH 6.8). Within the same conditions, pH of matrix microenvironment was measured. To determine relationships between the above mentioned properties of acidifiers and the monitored effects (the amount of released drug and surface pH of gel layer in selected time intervals—360 and 480 min), the full factorial design method and partial least squares PLS-2 regression were used. The incorporation of the tested pH modifiers significantly increased the drug release rate from matrices. PLS-components explained 75% and 73% variation in the X- and Y-data, respectively. The obtained results indicated that the main crucial points (p < 0.01) were the concentration and strength of acidifier incorporated into the matrix. Contrary, the acid solubility surprisingly did not influence the selected effects except for the surface pH of gel layer in time 480 min.Key words: gel layer, matrix tablets, pH-independent drug release, pH modifiers, statistical evaluation     

Impact of Cross-linking and Drying Method on Drug Delivery Performance of Casein–Pectin Microparticles

Pectin is a heteropolysaccharide which has been investigated for the development of colon-specific drug delivery systems. Polymers have been associated with pectin to reduce its aqueous solubility and improve the performance of drug delivery systems. Pectin–casein interaction is widely known in food research, but it has not been fully considered by pharmaceutical scientists. Thus, this study investigated the potential of casein–pectin microparticles as a drug delivery system and clarified the impact of cross-linking and drying methods on the in vitro release of indomethacin (IND) or acetaminophen (PCT) from microparticles. Microparticles were prepared by coacervation and dried by spray or spouted bed methods. Drug recovery, in vitro drug release, size, morphology, and the thermal and diffractometric properties of dried microparticles were determined. Spray-dried non-cross-linked microparticles were able to prolong IND release, and pectin was still degraded by pectinolytic enzymes. On the other hand, glutaraldehyde cross-linking prevented the enzymatic breakdown of pectin without improving IND release. Spouted bed drying reduced IND recovery from all microparticles when compared with spray drying, thus the successful spouted bed drying of microparticles depends on the chemical characteristics of both the drug and the polymer. Release data from PCT microparticles suggested that the microparticle formulation should be improved to bring about a more efficient delivery of water-soluble drugs. In conclusion, casein–pectin microparticles show great potential as a drug delivery system because casein reduces the water solubility of pectin. The drying method and cross-linking process had significant effects on the in vitro performance of these microparticles.     

Effects of Thermal Curing Conditions on Drug Release from Polyvinyl Acetate–Polyvinyl Pyrrolidone Matrices

This study aimed to investigate the effects of dry and humid heat curing on the physical and drug release properties of polyvinyl acetate–polyvinyl pyrrolidone matrices. Both conditions resulted in increased tablet hardness; tablets stored under humid conditions showed high plasticity and deformed during hardness testing. Release from the matrices was dependent on the filler's type and level. Release profiles showed significant changes, as a result of exposure to thermal stress, none of the fillers used stabilized matrices against these changes. Density of neat polymeric compacts increased upon exposure to heat; the effect of humid heat was more evident than dry heat. Thermograms of samples cured under dry heat did not show changes, while those of samples stored under high humidity showed significant enlargement of the dehydration endotherm masking the glass transition of polyvinyl acetate. The change of the physical and release properties of matrices could be explained by the hygroscopic nature of polyvinyl pyrrolidone causing water uptake; absorbed water then acts as a plasticizer of polyvinyl acetate promoting plastic flow, deformation, and coalescence of particles, and altering the matrices internal structure. Results suggest that humid heat is more effective as a curing environment than dry heat for polyvinyl acetate–polyvinyl pyrrolidone matrices.     

Sustained Release of Amoxicillin from Ethyl Cellulose-Coated Amoxicillin/Chitosan–Cyclodextrin-Based Tablets

Sustained release mucoadhesive amoxicillin tablets with tolerance to acid degradation in the stomach were studied. The sustained-release tablets of amoxicillin were prepared from amoxicillin coated with ethyl cellulose (EC) and then formulated into tablets using chitosan (CS) or a mixture of CS and beta-cyclodextrin (CD) as the retard polymer. The effects of various (w/w) ratios of EC/amoxicillin, the particle sized of EC coated amoxicillin and the different (w/w) ratios of CS/CD for the retard polymer, on the amoxicillin release profile were investigated. The physicochemical properties of the EC coated amoxicillin particles and tablets were determined by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. The result showed that the release profiles of amoxicillin were greatly improved upon coating with EC, while the inclusion of CD to the CS retardant additionally prolonged the release of the drug slightly. Overall, a sustained release of amoxicillin was achieved using amoxicillin coated with EC at a (w/w) ratio of 1:1 and a particle size of 75–100 μm. Therefore, the tablet formulation of amoxicillin may be an advantageous alternative as an orally administered sustained-release formulation for the treatment of peptic ulcers.     

Effect of Metal Ions on Melanin – Local Anaesthetic Drug Complexes

The affinity of melanin biopolymers for metal ions, drugs and other organic compounds is an important factor in the etiology of toxic retinopathy, hiperpigmentation, otic lesions and irreversible extrapyramidal disorders. The aim of the presented work was to examine the interaction of local anaesthetic drugs used in ophthalmology with model DOPA-melanin in the presence of metal ions. It has been demonstrated that the analyzed drugs form complexes with melanin biopolymer. Based on the .values of association constants,, the following order of drugs affinity to melanin was found: tetracaine > procaine >> bupivacaine > lidocaine. It has also been shown that Cu²⁺ and Zn²⁺ ions administered to DOPA-melanin before complexing with drugs decrease the total amount of local anaesthetics bound to melanin. The blocking of some active centers in melanin molecules by metal ions, which potentially exist in living systems, may change the clinical therapeutic efficiency of the analyzed local anaesthetic drugs.     

Investigation into the Effect of Ethylcellulose Viscosity Variation on the Drug Release of Metoprolol Tartrate and Acetaminophen Extended Release Multiparticulates—Part I

Ethylcellulose is one of the most commonly used polymers to develop reservoir type extended release multiparticulate dosage forms. For multiparticulate extended release dosage forms, the drug release is typically governed by the properties of the barrier membrane coating. The ICH Pharmaceutical Development Guideline (ICH Q8) requires an understanding of the influence of critical material attributes and critical process parameters on the drug release of a pharmaceutical product. Using this understanding, it is possible to develop robust formulations with consistent drug release characteristics. Critical material attributes for ethylcellulose were evaluated, and polymer molecular weight variation (viscosity) was considered to be the most critical attribute that can impact drug release. To investigate the effect of viscosity variation within the manufacturer’s specifications of ethylcellulose, extended release multiparticulate formulations of two model drugs, metoprolol tartrate and acetaminophen, were developed using ETHOCEL? as the rate controlling polymer. Quality by Design (QbD) samples of ETHOCEL Std. 10, 20, and 100 Premium grades representing the low, medium, and high molecular weight (viscosity) material were organically coated onto drug layered multiparticulates to a 15% weight gain (WG). The drug release was found to be similar (f ₂?>?50) for both metoprolol tartrate and acetaminophen multiparticulates at different coating weight gains of ethylcellulose, highlighting consistent and robust drug release performance. The use of ETHOCEL QbD samples also serves as a means to develop multiparticulate dosage formulations according to regulatory guidelines.     

Studies on Tolfenamic Acid–Chitosan Intermolecular Interactions: Effect of pH, Polymer Concentration and Molecular Weight

Solid-state properties of tolfenamic acid (TA) and its complexes with chitosan (CT) have been studied. Effect of medium pH, molecular weight of polymer and its different concentrations on these TA–CT complexes were studied in detail. Low and medium molecular weight CT have been used in different ratios at pH ranging from 4 to 6 and freeze-drying technique has been employed to modify the appearance of crystalline TA. Physical properties of the formed complexes have been studied by employing X-ray diffraction, differential scanning calorimetry and scanning electron microscopy; chemical structure has been studied using Fourier transform infrared spectroscopy. The results showed that both forms of the polymer exhibited complete conversion in 1:8 ratio at pH 4, 1:4 at pH 5 and 1:1 at pH 6 indicating a marked effect of pH on drug–polymer complexation. The percent crystallinity calculations indicated low molecular weight CT slightly more effective than the other form. No changes in the complexes have been observed during the 12 week storage under controlled conditions. Both forms of CT at different pH values indicated retardation of recrystallization in TA during cooling of the melt from 1:1 ratios exhibiting formation of strong intermolecular hydrogen bonding between the drug and the polymer.     

Studies on the Effect of Water-Soluble Polymers on Drug–Cyclodextrin Complex Solubility

The effect of complexation of irbesartan (IRB), a practically water-insoluble drug, with cyclodextrins in presence of different concentrations of water-soluble polymers (PEG 4000 and PVP K-90) on the dissolution rate of the drug has been investigated. Phase solubility studies were carried out to evaluate the solubilizing power of βCD in association with water-soluble polymers towards IRB and to determine the apparent stability constant (K _S) of the complexes. Improvement in K _S value for ternary complexes (IRB–βCD–polymers) clearly proved the benefit on the addition of water-soluble polymer to increase complexation efficiency. The dissolution rate of the drug from ternary systems containing PEG 4000 and PVP K-90 was higher as compared to the binary system. An optimum increase in the dissolution rate of the drug was observed at a polymer concentration of 5% w/w for PVP K-90 and 10% w/w for PEG 4000. DSC, FTIR, SEM, and XRD studies were carried out to characterize the complexes.     

Effect of Intercalators on the Properties of Liquid-Crystalline Dispersions of Nucleic Acid–Chitosan Complex

Molecules of deoxyribonucleic acid and synthetic polydeoxyribonucleotides (NA) in the particles of liquid-crystalline dispersions resulting from interaction with chitosan are accessible to interaction with intercalators. The intercalation is accompanied by alteration in the direction of spatial twist of cholesterics of NA–chitosan complexes. This effect is absent in the case of classical cholesterics produced from NA molecules via phase exclusion, i.e., the cholesteric structure of NA–chitosan complex is very labile as distinct from classical cholesteric NA.     

Metabolism, Pharmacogenetics, and Metabolic Drug–Drug Interactions of Antipsychotic Drugs

1. Antipsychotic drugs are extensively metabolised by cytochrome P450 (CYP) enzymes.2. Dispositions of a number of antipsychotic drugs have been shown to cosegregate with polymorphism of CYP2D6.3. Metabolic drug–drug interactions have frequently been observed when antipsychotics are coadministered with other drugs.4. Many antipsychotic drugs are converted to active metabolites which can contribute to the therapeutic or side effects of the parent drug.5. Information concerning the individual CYP isoenzymes involved in the metabolism of antipsychotic drugs is important for the safe clinical use of this group of drugs.     

Effect of Cys,GSH, and pH on Mercury Release from Tibetan Medicine Zuotai, β-HgS,and α-HgS in Artificial Gastrointestinal Juices

Biological Trace Element Research - Zuotai, also named as “gTso thal”, a known Tibetan medicinal mixture containing insoluble cubic crystal mercuric sulfide (β-HgS), has been used...     

Effect of Different Interferonα2 Preparations on IP10 and ET-1 Release from Human Lung Cells

Background

Alfa-interferons (IFNα2a, IFNα2b, 40KDa-PEGIFNα2a and 12KDa-PEGIFNα2b) are effective treatments for chronic hepatitis C infection. However, their usage has been associated with a variety of adverse events, including interstitial pneumonitis and pulmonary arterial hypertension. Although rare, these adverse events can be severe and potentially life-threatening, emphasizing the need for simple biomarkers of IFN-induced lung toxicity.

Methods

Human lung microvascular endothelial cells (HLMVEC), human pulmonary artery smooth muscle (HPASM) cells and A549 cells were grown under standard conditions and plated into 96- or 6-well plates. Cells were stimulated with various concentrations of different IFNs in hydrocortisone-free medium. After 24 and 48 hours, IP10 and ET-1 were measured by ELISA in conditioned medium. In a second set of experiments, cells were pre-treated with tumour necrosis factor-α (TNF-α) (10 ng/mL).

Results

IFNα2a, IFNα2b, 40KDa-PEGIFNα2a and 12KDa-PEGIFNα2b, but not IFNλ, induced IP10 (CXCL10) release and increased IP10 gene induction in HLMVEC. In addition, all four IFNα preparations induced IP10 release from HPASM cells and A549 cells pre-treated with TNFα. In each of these cell types, 40KDa-PEGIFNα2a was significantly less active than the native forms of IFNα2a, IFNα2b or 12KDa-PEGIFNα2b. Similarly, IFNα2a, IFNα2b and 12KDa-PEGIFNα2b, but not 40KDa-PEGIFNα2a, induced endothelin (ET)-1 release from HPASM cells.

Conclusions

Consistent with other interstitial pulmonary diseases, both IP10 and ET1 may serve as markers to monitor IFN-induced lung toxicity in patients. In addition, both markers may also serve to help characterize the risk associated with IFNα preparations to induce lung toxicity.     

Effect of Supporting Substrates on the Structure of DNA and DNA–Trivaline Complexes Studied by Atomic Force Microscopy

Linear DNA, circular DNA, and circular DNA complexes with trivaline (TV), a synthetic oligopeptide, were imaged by atomic force microscopy (AFM) using mica as a conventional supporting substrate and modified highly ordered pyrolytic graphite (HOPG) as an alternative substrate. A method of modifying the HOPG surface was developed that enabled the adsorption of DNA and DNA–TV complexes onto this surface. On mica, both purified DNA and DNA–TV complexes were shown to undergo significant structural distortions: DNA molecules decrease in height and DNA–TV displays substantial changes in the shape of its circular compact structures. Use of the HOPG support helps preserve the structural integrity of the complexes and increase the measured height of DNA molecules up to 2 nm. AFM with the HOPG support was shown to efficiently reveal the particular points of the complexes where, according to known models of their organization, a great number of bent DNA fibers meet. These results provide additional information on DNA organization in its complexes with TV and are also of methodological interest, since the use of the modified HOPG may widen the possibilities of AFM in studying DNA and its complexes with various ligands.     

Effect of the Support Size on the Properties of β-Galactosidase Immobilized on Chitosan: Advantages and Disadvantages of Macro and Nanoparticles

The effect of the support size on the properties of enzyme immobilization was investigated by using chitosan macroparticles and nanoparticles. They were prepared by precipitation and ionotropic gelation, respectively, and were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), transmission electron microscopy (TEM), light scattering analysis (LSA), and N(2) adsorption-desorption isotherms. β-Galactosidase was used as a model enzyme. It was found that the different sizes and porosities of the particles modify the enzymatic load, activity, and thermal stability of the immobilized biocatalysts. The highest activity was shown by the enzyme immobilized on nanoparticles when 204.2 mg protein·(g dry support)(-1) were attached. On the other hand, the same biocatalysts presented lower thermal stability than macroparticles. β-Galactosidase immobilized on chitosan macro and nanoparticles exhibited excellent operational stability at 37 °C, because it was still able to hydrolyze 83.2 and 75.93% of lactose, respectively, after 50 cycles of reuse.     

Effect of Eudragit<Superscript>®</Superscript> RS 30D and Talc Powder on Verapamil Hydrochloride Release from Beads Coated with Drug Layered Matrices

The aim of this study was to investigate the effect of Eudragit RS 30D, talc, and verapamil hydrochloride on dissolution and mechanical properties of beads coated with "drug-layered matrices". This was accomplished with the aid of a three-factor multiple-level factorial design using percent drug release in 1 and 2 h, T(50), tensile strength, brittleness, stiffness and toughness as the responses. Beads were coated in a fluidized-bed coating unit. Surface morphology and mechanical properties were evaluated by surface profilometry and texture analysis, respectively. No cracks, flaws and fissures were observed on the surfaces. The mechanical properties were dependent on the talc/polymer ratio. The release of verapamil from the beads was influenced by matrix components. Increasing the level of both talc and Eudragit decreased the percent drug released from 67% to 4.8% and from 80.7% to 6.7% in 1 and 2 h, respectively, and increased T(50) from 0.8 to 25.7 h. It was concluded that beads could be efficiently coated with "drug-layered matrices". The release of drug, however, depends on a balance between the levels of drug, talc, and polymer, whereby desired dissolution and mechanical properties could be controlled by the talc/polymer ratio and the level of drug loading.     

Effect of Pectin Type on Association and pH Stability of Whey Protein—Pectin Complexes

The purpose of this study was to investigate the influence of pectin type on complex formation between whey protein isolate (WPI) and high methoxy pectins with varying degrees of esterification (DE), and their pH stability. The biopolymer particles with protein-to-polysaccharide mass ratio set to 2:1 were formed at pH 3–7 by heating at 85 °C for 20 min. The particle size, electrical charge, turbidity and microstructure of the biopolymer complexes were evaluated. The optimal conditions for forming WPI-pectin complexes were at the initial pH of 4.5–4.75, just below the isoelectric point of the WPI, where complex formation occurs. At this pH range, the smallest biopolymer complexes (d?=?225–300 nm) could be created. Pectins with 50, 55, 62 and 70 % DE formed relatively small and monomodal complexes with WPI, except for pectin with 71 % DE, which showed major aggregation. The pH stability against aggregation was best with the biopolymer complexes assembled from pectins with 50 % DE (stable at pH 3.5–6.0) and with 62 % DE (stable at pH 3.0–6.0). The results suggest that pectins with varying DE can be used to form small particles and therefore can offer new possibilities in designing novel hierarchical structures and delivery systems.     

Impact of Lipase, Bile Salts, and Polysaccharides on Properties and Digestibility of Tuna Oil Multilayer Emulsions Stabilized by Lecithin–Chitosan

The influence of lipase, bile salts, and polysaccharides (pectin and maltodextrin) on the properties and digestibility of lecithin/chitosan-stabilized tuna oil-in-water multilayer emulsions were studied when they were subjected to an in vitro digestion model. All emulsions became unstable to creaming after passing through the digestion model, as deduced from the formation of large visible brown clumps on the top of the emulsions. The release of free fatty acids and glucosamine from the emulsions suggested that lecithin/chitosan-coated droplets were degraded by lipase under simulated gastrointestinal conditions. The amount of free fatty acids released per unit amount of emulsion was higher when bile salt was included in the digestion model or anionic polysaccharide (pectin) was present in the emulsions. These results have important implications for the utilization of multilayered emulsions for the encapsulation, protection, and delivery of n-3 fatty acids and other bioactive lipids.     

Effect of electrolytes and of distilled water on antigen–antibody complexes

Specific immune precipitates dissolve in concentrated solutions of alkali-metal halides, and of alkaline-earth-metal halides and thiocyanates. The quantity of protein dissolved depends on the nature of the antigen-antibody system, on the proportion of the antigen in the precipitate, and on the avidity of the antibody. The extent of solubilization is a function of the temperature, of the volume of solution used and of the concentration of the ions in the solution, and also depends on the nature of these ions. The dissolving power of bivalent cations is greater than that of monovalent ones, and is as follows: Mg(2+)[unk]Ba(2+)[unk]Ca(2+)[unk]Sr(2+). Antigen-antibody complexes and free antibodies, but no free antigen, are detected in supernatants of specific precipitates dissolved in solutions of electrolytes of low ionic strength. Antigen-antibody complexes, free antibodies and also free antigen are detected in supernatants of specific precipitates dissolved in solutions of electrolytes of high ionic strength. Comparable results are obtained when the electrolyte solutions are studied for their effect on the bonds formed between an antibody and its corresponding immunosorbent. Moreover, in the latter case, 50% of the fixed antibodies could be recovered by elution with distilled water.     

Effect of Auxiliary Substances on Complexation Efficiency and Intrinsic Dissolution Rate of Gemfibrozil–β-CD Complexes

The studies reported in this work are aimed to elucidate the ternary inclusion complex formation of gemfibrozil (GFZ), a poorly water-soluble drug, with β-cyclodextrin (β-CD) with the aid of auxiliary substances like different grades of povidone(s) (viz. PVP K-29/32, PVP K-40, Plasdone S-630, and Polyplasdone XL), organic base (viz. triethanolamine), and metal ion (viz. MgCl₂·6H₂O), by investigating their interactions in solution and solid state. Phase solubility studies were carried out to evaluate the solubilizing power of β-cyclodextrin, in association with various auxiliary substances, to determine the apparent stability constant (K _C) and complexation efficiency (CE) of complexes. Improvement in K _C values for ternary complexes clearly proves the benefit of the addition of auxiliary substances to promote CE. Of all the approaches used, the use of polymer Plasdone S-630 was found to be the most promising approach in terms of optimum CE and K _C. GFZ–β-CD (1:1) binary and ternary systems were prepared by kneading and lyophilization methods. The ternary systems clearly signified superiority over binary systems in terms of CE, solubility, K _C, and reduction in the formulation bulk. Optimized ternary system of GFZ–β-CD–Plasdone S-630 prepared by using lyophilization method indicated a significant improvement in intrinsic dissolution rate when compared with ternary kneaded system. Differential scanning calorimetry, X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and proton nuclear magnetic resonance were carried out to characterize the binary and optimized ternary complex. The results suggested the formation of new solid phases, eliciting strong evidences of ternary inclusion complex formation between GFZ, β-CD, and Plasdone S-630, particularly for lyophilized products.