Accelerated Optimization of TiO2/Sb2Se3 Thin Film Solar Cells by High‐Throughput Combinatorial Approach

Sb₂Se₃, a V₂‐VI₃ compound semiconductor, has attracted extensive research attention in photovoltaics due to its non‐toxicity, low cost and earth‐abundant constituents. Herein, a combinatorial approach to optimize the performance of TiO₂/Sb₂Se₃ thin film photovoltaics is employed. By simultaneously conducting a series of experiments in parallel rather than one after another, combinatorial strategy increases experimental throughput and reduces personnel costs. Key parameters such as TiO₂ thickness, post‐annealing temperature and Sb₂Se₃ thickness are identified as 65 nm, 450 °C and 850 nm through the combinatorial approach. Finally, in combination with (NH₄)₂S back surface cleaning, TiO₂/Sb₂Se₃ solar cells with 5.6% efficiency and decent stability are obtained, showcasing the power of high‐throughput strategy for accelerating the optimization of Sb₂Se₃ photovoltaics.     

Fullerene as a Photoelectron Transfer Promoter Enabling Stable TiO2‐Protected Sb2Se3 Photocathodes for Photo‐Electrochemical Water Splitting

Understanding the degradation mechanisms of photoelectrodes and improving their stability are essential for fully realizing solar‐to‐hydrogen conversion via photo‐electrochemical (PEC) devices. Although amorphous TiO₂ layers have been widely employed as a protective layer on top of p‐type semiconductors to implement durable photocathodes, gradual photocurrent degradation is still unavoidable. This study elucidates the photocurrent degradation mechanisms of TiO₂‐protected Sb₂Se₃ photocathodes and proposes a novel interface‐modification methodology in which fullerene (C₆₀) is introduced as a photoelectron transfer promoter for significantly enhancing long‐term stability. It is demonstrated that the accumulation of photogenerated electrons at the surface of the TiO₂ layer induces the reductive dissolution of TiO₂, accompanied by photocurrent degradation. In addition, the insertion of the C₆₀ photoelectron transfer promoter at the Pt/TiO₂ interface facilitates the rapid transfer of photogenerated electrons out of the TiO₂ layer, thereby yielding enhanced stability. The Pt/C₆₀/TiO₂/Sb₂Se₃ device exhibits a high photocurrent density of 17 mA cm^?2 and outstanding stability over 10 h of operation, representing the best PEC performance and long‐term stability compared with previously reported Sb₂Se₃‐based photocathodes. This research not only provides in‐depth understanding of the degradation mechanisms of TiO₂‐protected photocathodes, but also suggests a new direction to achieve durable photocathodes for photo‐electrochemical water splitting.     

K‐Ion Storage Enhancement in Sb2O3/Reduced Graphene Oxide Using Ether‐Based Electrolyte

In this work, an ether‐based electrolyte is adopted instead of conventional ester‐based electrolyte for an Sb₂O₃‐based anode and its enhancement mechanism is unveiled for K‐ion storage. The anode is fabricated by anchoring Sb₂O₃ onto reduced graphene oxide (Sb₂O₃‐RGO) and it exhibits better electrochemical performance using an ether‐based electrolyte than that using a conventional ester‐based electrolyte. By optimizing the concentration of the electrolyte, the Sb₂O₃‐RGO composite delivers a reversible specific capacity of 309 mAh g^?1 after 100 cycles at 100 mA g^?1. A high specific capacity of 201 mAh g^?1 still remains after 3300 cycles (111 days) at 500 mA g^?1 with almost no decay, exhibiting a longer cycle life compared with other metallic oxides. In order to further reveal the intrinsic mechanism, the energy changes for K atom migrating from surface into the sublayer of Sb₂O₃ are explored by density functional theory calculations. According to the result, the battery using the ether‐based electrolyte exhibits a lower energy change and migration barrier than those using other electrolytes for K‐ion, which is helpful to improve the K‐ion storage performance. It is believed that the work can provide deep understanding and new insight to enhance electrochemical performance using ether‐based electrolytes for KIBs.     

Bioinspired Surface Layer for the Cathode Material of High‐Energy‐Density Sodium‐Ion Batteries

Cathode materials are usually active in the range of 2–4.3 V, but the decomposition of the electrolytic salt above 4 V versus Na⁺/Na is common. Arguably, the greatest concern is the formation of HF after the reaction of the salts with water molecules, which are present as an impurity in the electrolyte. This HF ceaselessly attacks the active materials and gradually causes the failure of the electrode via electric isolation of the active materials. In this study, a bioinspired β‐NaCaPO₄ nanolayer is reported on a P2‐type layered Na_2/3[Ni_1/3Mn_2/3]O₂ cathode material. The coating layers successfully scavenge HF and H₂O, and excellent capacity retention is achieved with the β‐NaCaPO₄‐coated Na_2/3[Ni_1/3Mn_2/3]O₂ electrode. This retention is possible because a less acidic environment is produced in the Na cells during prolonged cycling. The intrinsic stability of the coating layer also assists in delaying the exothermic decomposition reaction of the desodiated electrodes. Formation and reaction mechanisms are suggested for the coating layers responsible for the excellent electrode performance. The suggested technology is promising for use with cathode materials in rechargeable sodium batteries to mitigate the effects of acidic conditions in Na cells.     

β‐arrestin2/miR‐155/GSK3β regulates transition of 5′‐azacytizine‐induced Sca‐1‐positive cells to cardiomyocytes

Stem‐cell antigen 1–positive (Sca‐1+) cardiac stem cells (CSCs), a vital kind of CSCs in humans, promote cardiac repair in vivo and can differentiate to cardiomyocytes with 5′‐azacytizine treatment in vitro. However, the underlying molecular mechanisms are unknown. β‐arrestin2 is an important scaffold protein and highly expressed in the heart. To explore the function of β‐arrestin2 in Sca‐1+ CSC differentiation, we used β‐arrestin2–knockout mice and overexpression strategies. Real‐time PCR revealed that β‐arrestin2 promoted 5′‐azacytizine‐induced Sca‐1+ CSC differentiation in vitro. Because the microRNA 155 (miR‐155) may regulate β‐arrestin2 expression, we detected its role and relationship with β‐arrestin2 and glycogen synthase kinase 3 (GSK3β), another probable target of miR‐155. Real‐time PCR revealed that miR‐155, inhibited by β‐arrestin2, impaired 5′‐azacytizine‐induced Sca‐1+ CSC differentiation. On luciferase report assay, miR‐155 could inhibit the activity of β‐arrestin2 and GSK3β, which suggests a loop pathway between miR‐155 and β‐arrestin2. Furthermore, β‐arrestin2‐knockout inhibited the activity of GSK3β. Akt, the upstream inhibitor of GSK3β, was inhibited in β‐arrestin2‐Knockout mice, so the activity of GSK3β was regulated by β‐arrestin2 not Akt. We transplanted Sca‐1+ CSCs from β‐arrestin2‐knockout mice to mice with myocardial infarction and found similar protective functions as in wild‐type mice but impaired arterial elastance. Furthermore, low level of β‐arrestin2 agreed with decreased phosphorylation of AKT and increased phophorylation of GSK3β, similar to in vitro findings. The β‐arrestin2/miR‐155/GSK3β pathway may be a new mechanism with implications for treatment of heart disease.     

Nuclear diacylglycerol lipase‐α in rat brain cortical neurons: evidence of 2‐arachidonoylglycerol production in concert with phospholipase C‐β activity

In this report, we describe the localization of diacylglycerol lipase‐α (DAGLα) in nuclei from adult cortical neurons, as assessed by double‐immunofluorescence staining of rat brain cortical sections and purified intact nuclei and by western blot analysis of subnuclear fractions. Double‐labeling assays using the anti‐DAGLα antibody and NeuN combined with Hoechst staining showed that only nuclei of neuronal origin were DAGLα positive. At high resolution, DAGLα‐signal displayed a punctate pattern in nuclear subdomains poor in Hoechst's chromatin and lamin B1 staining. In contrast, SC‐35‐ and NeuN‐signals (markers of the nuclear speckles) showed a high overlap with DAGLα within specific subdomains of the nuclear matrix. Among the members of the phospholipase C‐β (PLCβ) family, PLCβ1, PLCβ2, and PLCβ4 exhibited the same distribution with respect to chromatin, lamin B1, SC‐35, and NeuN as that described for DAGLα. Furthermore, by quantifying the basal levels of 2‐arachidonoylglycerol (2‐AG) by liquid chromatography and mass spectrometry (LC‐MS), and by characterizing the pharmacology of its accumulation, we describe the presence of a mechanism for 2‐AG production, and its PLCβ/DAGLα‐dependent biosynthesis in isolated nuclei. These results extend our knowledge about subcellular distribution of neuronal DAGLα, providing biochemical grounds to hypothesize a role for 2‐AG locally produced within the neuronal nucleus.

     

Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries

Iron oxides, such as Fe₂O₃ and Fe₃O₄, have recently received increased attention as very promising anode materials for rechargeable lithium‐ion batteries (LIBs) because of their high theoretical capacity, non‐toxicity, low cost, and improved safety. Nanostructure engineering has been demonstrated as an effective approach to improve the electrochemical performance of electrode materials. Here, recent research progress in the rational design and synthesis of diverse iron oxide‐based nanomaterials and their lithium storage performance for LIBs, including 1D nanowires/rods, 2D nanosheets/flakes, 3D porous/hierarchical architectures, various hollow structures, and hybrid nanostructures of iron oxides and carbon (including amorphous carbon, carbon nanotubes, and graphene). By focusing on synthesis strategies for various iron‐oxide‐based nanostructures and the impacts of nanostructuring on their electrochemical performance, novel approaches to the construction of iron‐oxide‐based nanostructures are highlighted and the importance of proper structural and compositional engineering that leads to improved physical/chemical properties of iron oxides for efficient electrochemical energy storage is stressed. Iron‐oxide‐based nanomaterials stand a good chance as negative electrodes for next generation LIBs.     

Evaluation of the double‐disk synergy test for New Delhi metallo‐β‐lactamase‐1 and other metallo‐β‐lactamase producing gram‐negative bacteria by using metal‐ethylenediaminetetraacetic acid complexes

New Delhi metallo‐β‐lactamase‐1 (NDM‐1), one of the metallo‐β‐lactamases (MBLs), has been identified from clinical isolates worldwide. Rapid detection of NDM‐1 producers is necessary to prevent their dissemination. Seven types of EDTA complexes were evaluated as MBL inhibitors in double‐disk synergy tests (DDSTs), resulting in detection of the first isolate of NDM‐1‐producing Escherichia coli (NDM‐1 Dok01) in Japan. NDM‐1 Dok01 was detected when EDTA magnesium disodium salt tetrahydrate (Mg‐EDTA), EDTA calcium disodium salt dihydrate, EDTA cobalt disodium salt tetrahydrate and EDTA copper disodium salt tetrahydrate were used as MBL inhibitors. The sensitivity and specificity of DDSTs using Mg‐EDTA for 75 MBL producers and 25 non‐MBL producers were 96.0% and 100%, respectively. These findings indicate that the DDST method using Mg‐EDTA can detect MBL‐producing strains, including NDM‐1 producers.     

The N‐terminal tripeptide of insulin‐like growth factor‐I protects against β‐amyloid‐induced somatostatin depletion by calcium and glycogen synthase kinase 3β modulation

The protective effects of insulin‐like growth factor I on the somatostatin (SRIF) system in the temporal cortex after β‐amyloid (Aβ) injury may be mediated through its N‐terminal tripeptide glycine‐proline‐glutamate (GPE). GPE is cleaved to cyclo[Pro‐Gly] (cPG), a metabolite suggested to mediate in neuroprotective actions. We evaluated the effects of GPE and cPG in the temporal cortex of Aβ25–35‐treated rats on SRIF and SRIF receptor protein and mRNA levels, adenylyl cyclase activity, cell death, Aβ25–35 accumulation, cytosolic calcium levels ([Ca²⁺]_c) and the intracellular signaling mechanisms involved. GPE and cPG did not change Aβ25–35 levels, but GPE partially restored SRIF and SRIF receptor 2 protein content and mRNA levels and protected against cell death after Aβ25–35 insult, which was coincident with Akt activation and glycogen synthase kinase 3β inhibition. In addition, GPE displaced glutamate from NMDA receptors and blocked the glutamate induced rise in cytosolic calcium in isolated rat neurons and moderately increased Ca²⁺ influx per se. Our findings suggest that GPE, but not its metabolite, mimics insulin‐like growth factor I effects on the SRIF system through a mechanism independent of Aβ clearance that involves modulation of calcium and glycogen synthase kinase 3β signaling.     

CD‐sensitive Zn‐porphyrin tweezer host‐guest complexes,part 2: Cis‐ and trans‐3‐hydroxy‐4‐aryl/alkyl‐β‐lactams. A case study

This article describes an application of the host‐guest chiral recognition approach called tweezer methodology for the determination of the absolute configuration of 3‐hydroxy‐β‐lactams. These substrates represent challenging cases due to their chemical reactivity, the presence of multiple stereogenic centers and several functional groups which offer various possibilities of binding to the Zn‐porphyrin host. OPLS‐2005, the force field used in this work to predict the interporphyrin twist, modeled correctly the host‐guest complexation mechanism and revealed conformational details of the bound substrates. The computational study also suggested that in cases where an increase in the magnitude of the stereodifferentiation and an intense experimental CD are observed, the bound conformation of the conjugates are hydrogen bonded. The present investigation provides evidence that when the tweezer method is assisted by the OPLS‐2005 based computational approach, it can be successfully applied to the configurational and conformational elucidation of multi‐functional compounds with multiple stereogenic centers. Chirality, 2010. © 2009 Wiley‐Liss, Inc.