A Versatile Pyramidal Hauerite Anode in Congeniality Diglyme‐Based Electrolytes for Boosting Performance of Li‐ and Na‐Ion Batteries

For the first time, environmentally friendly sulfur‐rich pyramidal MnS₂ synthesized via a single‐step hydrothermal process is used as a high‐performance anode material in Li‐ion and Na‐ion batteries. The superior electrochemical performance of the MnS₂ electrode along with its high compatibility with ether‐based electrolytes are analyzed in both half‐ and full‐cell configurations. The reversible capacities of ≈84 mAh g^?1 and ≈74 mAh g^?1 at a current density of 50 mA g^?1 are retained in the Li‐ion and Na‐ion full‐cells, respectively, over 200 cycles with excellent capacity retentions. Moreover, important findings regarding activation processes in the presence of a new phase transition and protective electrolyte interphase layer are revealed using ab initio density function theory calculation and in situ potentio‐electrochemical impedance spectroscopy. The detailed complex redox mechanism of MnS₂ in Li/Na half‐cells is also elucidated by ex situ X‐ray photoelectron spectroscopy.     

Frogspawn‐Coral‐Like Hollow Sodium Sulfide Nanostructured Cathode for High‐Rate Performance Sodium–Sulfur Batteries

Room‐temperature (RT) sodium–sulfur (Na–S) batteries are attractive cost‐effective platforms as the next‐generation energy storage systems by using all earth‐abundant resources as electrode materials. However, the slow kinetics of Na–S chemistry makes it hard to achieve high‐rate performance. Herein, a facile and scalable approach has been developed to synthesize hollow sodium sulfide (Na₂S) nanospheres embedded in a highly hierarchical and spongy conductive carbon matrix, forming an intriguing architecture similar to the morphology of frogspawn coral, which has shown great potential as a cathode for high‐rate performance RT Na–S batteries. The shortened Na‐ion diffusion pathway benefits from the hollow structures together with the fast electron transfer from the carbon matrix contributes to high electrochemical reactivity, leading to superior electrochemical performance at various current rates. At high current densities of 1.4 and 2.1 A g^?1, high initial discharge capacities of 980 and 790 mAh g^?1_sulfur can be achieved, respectively, with reversible capacities stabilized at 600 and 400 mAh g^?1_sulfur after 100 cycles. As a proof of concept, a Na‐metal‐free Na–S battery is demonstrated by pairing the hollow Na₂S cathode with tin‐based anode. This work provides guidance on rational materials design towards the success of RT high‐rate Na–S batteries.     

High Capacity All‐Solid‐State Lithium Batteries Enabled by Pyrite‐Sulfur Composites

As the theoretical limit of intercalation material‐based lithium‐ion batteries is approached, alternative chemistries based on conversion reactions are presently considered. The conversion of sulfur is particularly appealing as it is associated with a theoretical gravimetric energy density up to 2510 Wh kg^?1. In this paper, three different carbon‐iron disulfide‐sulfur (C‐FeS₂‐S) composites are proposed as alternative positive electrode materials for all‐solid‐state lithium‐sulfur batteries. These are synthesized through a facile, low‐cost, single‐step ball‐milling procedure. It is found that the crystalline structure (evaluated by X‐ray diffraction) and the morphology of the composites (evaluated by scanning electron microscopy) are greatly influenced by the FeS₂:S ratio. Li/LiI‐Li₃PS₄/C‐FeS₂‐S solid‐state cells are tested under galvanostatic conditions, while differential capacity plots are used to discuss the peculiar electrochemical features of these novel materials. These cells deliver capacities as high as 1200 mAh g_(FeS2+S)^?1 at the intermediate loading of 1 mg cm^?2 (1.2 mAh cm^?2), and up to 3.55 mAh cm^?2 for active material loadings as high as 5 mg cm^?2 at 20 °C. Such an excellent performance, rarely reported for (sulfur/metal sulfide)‐based, all solid‐state cells, makes these composites highly promising for real application where high positive electrode loadings are required.     

Paper‐Based Energy‐Storage Devices Comprising Carbon Fiber‐Reinforced Polypyrrole‐Cladophora Nanocellulose Composite Electrodes

Composites of polypyrrole (PPy) and Cladophora nanocellulose, reinforced with 8 μm‐thick chopped carbon filaments, can be used as electrode materials to obtain paper‐based energy‐storage devices with unprecedented performance at high charge and discharge rates. Charge capacities of more than 200 C g^?1 (PPy) are obtained for paper‐based electrodes at potential scan rates as high as 500 mV s^?1, whereas cell capacitances of ～60–70 F g^?1 (PPy) are reached for symmetric supercapacitor cells with capacitances up to 3.0 F (i.e.,0.48 F cm^?2) when charged to 0.6 V using current densities as high as 31 A g^?1 based on the PPy weight (i.e., 99 mA cm^?2). Energy and power densities of 1.75 Wh kg^?1 and 2.7 kW kg^?1, respectively, are obtained when normalized with respect to twice the PPy weight of the smaller electrode. No loss in cell capacitance is seen during charging/discharging at 7.7 A g^?1 (PPy) over 1500 cycles. It is proposed that the nonelectroactive carbon filaments decrease the contact resistances and the resistance of the reduced PPy composite. The present straightforward approach represents significant progress in the development of low‐cost and environmentally friendly paper‐based energy‐storage devices for high‐power applications.     

High‐Quality Graphene Microflower Design for High‐Performance Li–S and Al‐Ion Batteries

Poor quality and insufficient productivity are two main obstacles for the practical application of graphene in electrochemical energy storage. Here, high‐quality crumpled graphene microflower (GmF) for high‐performance electrodes is designed. The GmF possesses four advantages simultaneously: highly crystallized defect‐free graphene layers, low stacking degree, sub‐millimeter continuous surface, and large productivity with low cost. When utilized as carbon host for sulfur cathode, the GmF‐sulfur hybrid delivers decent areal capacities of 5.2 mAh cm^?2 at 0.1 C and 3.8 mAh cm^?2 at 0.5 C. When utilized as cathode of Al‐ion battery, the GmF affords a high capacity of 100 mAh g^?1 with 100% capacity retention after 5000 cycles and excellent rate capability from 0.1 to 20 A g^?1. This facile and large‐scale producible GmF represents a meaningful high‐quality graphene powder for practical energy storage technology. Meanwhile, this unique high‐quality graphene design provides an effective route to improve electrochemical properties of graphene‐based electrodes.     

Fabrication of Hierarchical Potassium Titanium Phosphate Spheroids: A Host Material for Sodium‐Ion and Potassium‐Ion Storage

Identifying suitable electrode materials for sodium‐ion and potassium‐ion storage holds the key to the development of earth‐abundant energy‐storage technologies. This study reports an anode material based on self‐assembled hierarchical spheroid‐like KTi₂(PO₄)₃@C nanocomposites synthesized via an electrospray method. Such an architecture synergistically combines the advantages of the conductive carbon network and allows sufficient space for the infiltration of the electrolyte from the porous structure, leading to an impressive electrochemical performance, as reflected by the high reversible capacity (283.7 mA h g^?1 for Na‐ion batteries; 292.7 mA h g^?1 for K‐ion batteries) and superior rate capability (136.1 mA h g^?1 at 10 A g^?1 for Na‐ion batteries; 133.1 mA h g^?1 at 1 A g^?1 for K‐ion batteries) of the resulting material. Moreover, the different ion diffusion behaviors in the two systems are revealed to account for the difference in rate performance. These findings suggest that KTi₂(PO₄)₃@C is a promising candidate as an anode material for sodium‐ion and potassium‐ion batteries. In particular, the present synthetic approach could be extended to other functional electrode materials for energy‐storage materials.     

A Large Scalable and Low‐Cost Sulfur/Nitrogen Dual‐Doped Hard Carbon as the Negative Electrode Material for High‐Performance Potassium‐Ion Batteries

Among the negative electrode materials for potassium ion batteries, carbon is very promising because of its low cost and environmental benignity. However, the relatively low storage capacity and sluggish kinetics still hinder its practical application. Herein, a large scalable sulfur/nitrogen dual‐doped hard carbon is prepared via a facile pyrolysis process with low‐cost sulfur and polyacrylonitrile as precursors. The dual‐doped hard carbon exhibits hierarchical structure, abundant defects, and functional groups. The material delivers a high reversible potassium storage capacity and excellent rate performance. In particular, a high reversible capacity of 213.7 and 144.9 mA h g^?1 can be retained over 500 cycles at 0.1 A g^?1 and 1200 cycles at 3 A g^?1, respectively, demonstrating remarkable cycle stability at both low and high rates, superior to the other carbon materials reported for potassium storage, to the best of the authors' knowledge. Structure and kinetics studies suggest that the dual‐doping enhances the potassium diffusion and storage, profiting from the formation of a hierarchical structure, introduction of defects, and generation of increased graphitic and pyridinic N sites. This study demonstrates that a facile and scalable pyrolysis strategy is effective to realize hierarchical structure design and heteroatom doping of carbon, to achieve excellent potassium storage performance.     

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

Searching for a new material to build the next‐generation rechargeable lithium‐ion batteries (LIBs) with high electrochemical performance is urgently required. Owing to the low‐cost, non‐toxicity, and high‐safety, the family of manganese oxide including the Na‐Mn‐O system is regarded as one of the most promising electrode materials for LIBs. Herein, a new strategy is carried out to prepare a highly porous and electrochemically active Na_0.55Mn₂O₄·1.5H₂O (SMOH) compound. As an anode material, the Na‐Mn‐O nanocrystal material dispersed within a carbon matrix manifests a high reversible capacity of 1015.5 mA h g^?1 at a current density of 0.1 A g^?1. Remarkably, a considerable capability of 546.8 mA h g^?1 remains even after 2000 discharge/charge cycles at the higher current density of 4 A g^?1, indicating a splendid cyclability. The exceptional electrochemical properties allow SMOH to be a promising anode material toward LIBs.     

Ultrathin Anatase TiO2 Nanosheets Embedded with TiO2‐B Nanodomains for Lithium‐Ion Storage: Capacity Enhancement by Phase Boundaries

A new form of TiO₂ microspheres comprised of anatase/TiO₂‐B ultrathin composite nanosheets has been synthesized successfully and used as Li‐ion storage electrode material. By comparison between samples obtained with different annealing temperatures, it is demonstrated that the anatase/TiO₂‐B coherent interfaces may contribute additional lithium storage venues due to a favorable charge separation at the boundary between the two phases. The as‐prepared hierarchical nanostructures show capacities of 180 and 110 mAh g^?1 after 1000 cycles at current densities of 3400 and 8500 mA g^?1. The ultrathin nanosheet structure which provides short lithium diffusion length and high electrode/electrolyte contact area also accounts for the high capacity and long‐cycle stability.     

Covalent Encapsulation of Sulfur in a MOF‐Derived S,N‐Doped Porous Carbon Host Realized via the Vapor‐Infiltration Method Results in Enhanced Sodium–Sulfur Battery Performance

Practical applications of room temperature sodium–sulfur batteries are still inhibited by the poor conductivity and slow reaction kinetics of sulfur, and dissolution of intermediate polysulfides in the commonly used electrolytes. To address these issues, starting from a novel 3D Zn‐based metal–organic framework with 2,5‐thiophenedicarboxylic acid and 1,4‐bis(pyrid‐4‐yl) benzene as ligands, a S, N‐doped porous carbon host with 3D tubular holes for sulfur storage is fabricated. In contrast to the commonly used melt‐diffusion method to confine sulfur physically, a vapor‐infiltration method is utilized to achieve sulfur/carbon composite with covalent bonds, which can join electrochemical reaction without low voltage activation. A polydopamine derived N‐doped carbon layer is further coated on the composite to confine the high‐temperature‐induced gas‐phase sulfur inside the host. S and N dopants increase the polarity of the carbon host to restrict diffusion of sulfur, and its 3D porous structure provides a large storage area for sulfur. As a result, the obtained composite shows outstanding electrochemical performance with 467 mAh g^?1 (1262 mAh g^?1_(sulfur)) at 0.1 A g^?1, 270 mAh g^?1 (730 mAh g^?1_(sulfur)) after 1000 cycles at 1 A g^?1 and 201 mAh g^?1 (543 mAh g^?1_(sulfur)) at 5.0 A g^?1.     

A Flexible Porous Carbon Nanofibers‐Selenium Cathode with Superior Electrochemical Performance for Both Li‐Se and Na‐Se Batteries

A flexible and free‐standing porous carbon nanofibers/selenium composite electrode (Se@PCNFs) is prepared by infiltrating Se into mesoporous carbon nanofibers (PCNFs). The porous carbon with optimized mesopores for accommodating Se can synergistically suppress the active material dissolution and provide mechanical stability needed for the film. The Se@PCNFs electrode exhibits exceptional electrochemical performance for both Li‐ion and Na‐ion storage. In the case of Li‐ion storage, it delivers a reversible capacity of 516 mAh g^?1 after 900 cycles without any capacity loss at 0.5 A g^?1. Se@PCNFs still delivers a reversible capacity of 306 mAh g^?1 at 4 A g^?1. While being used in Na‐Se batteries, the composite electrode maintains a reversible capacity of 520 mAh g^?1 after 80 cycles at 0.05 A g^?1 and a rate capability of 230 mAh g^?1 at 1 A g^?1. The high capacity, good cyclability, and rate capability are attributed to synergistic effects of the uniform distribution of Se in PCNFs and the 3D interconnected PCNFs framework, which could alleviate the shuttle reaction of polyselenides intermediates during cycling and maintain the perfect electrical conductivity throughout the electrode. By rational and delicate design, this type of self‐supported electrodes may hold great promise for the development of Li‐Se and Na‐Se batteries with high power and energy densities.     

A Novel α‐MoO3/Single‐Walled Carbon Nanohorns Composite as High‐Performance Anode Material for Fast‐Charging Lithium‐Ion Battery

Orthorhombic α‐MoO₃ is a potential anode material for lithium‐ion batteries due to its high theoretical capacity of 1100 mAh g^?1 and excellent structural stability. However, its intrinsic poor electronic conductivity and high volume expansion during the charge–discharge process impede it from achieving a high practical capacity. A novel composite of α‐MoO₃ nanobelts and single‐walled carbon nanohorns (SWCNHs) is synthesized by a facile microwave hydrothermal technique and demonstrated as a high‐performance anode material for lithium‐ion batteries. The α‐MoO₃/SWCNH composite displays superior electrochemical properties (654 mAh g^?1 at 1 C), excellent rate capability (275 mAh g^?1 at 5 C), and outstanding cycle life (capacity retention of >99% after 3000 cycles at 1 C) without any cracking of the electrode. The presence of SWCNHs in the composite enhances the electrochemical properties of α‐MoO₃ by acting as a lithium storage material, electronic conductive medium, and buffer against pulverization.     

Electrospun NaVPO4F/C Nanofibers as Self‐Standing Cathode Material for Ultralong Cycle Life Na‐Ion Batteries

NaVPO₄F has received a great deal of attention as cathode material for Na‐ion batteries due to its high theoretical capacity (143 mA h g^?1), high voltage platform, and structural stability. Novel NaVPO₄F/C nanofibers are successfully prepared via a feasible electrospinning method and subsequent heat treatment as self‐standing cathode for Na‐ion batteries. Based on the morphological and microstructural characterization, it can be seen that the NaVPO₄F/C nanofibers are smooth and continuous with NaVPO₄F nanoparticles (≈6 nm) embedded in porous carbon matrix. For Na‐storage, this electrode exhibits extraordinary electrochemical performance: a high capacity (126.3 mA h g^?1 at 1 C), a superior rate capability (61.2 mA h g^?1 at 50 C), and ultralong cyclability (96.5% capacity retention after 1000 cycles at 2 C). 1D NaVPO₄F/C nanofibers that interlink into 3D conductive network improve the conductivity of NaVPO₄F, and effectively restrain the aggregation of NaVPO₄F particles during charge/discharge process, leading to the high performance.     

3D Hierarchical Porous α‐Fe2O3 Nanosheets for High‐Performance Lithium‐Ion Batteries

To develop a long cycle life and good rate capability electrode, 3D hierarchical porous α‐Fe₂O₃ nanosheets are fabricated on copper foil and directly used as binder‐free anode for lithium‐ion batteries. This electrode exhibits a high reversible capacity and excellent rate capability. A reversible capacity up to 877.7 mAh g^?1 is maintained at 2 C (2.01 A g^?1) after 1000 cycles, and even when the current is increased to 20 C (20.1 A g^?1), a capacity of 433 mA h g^?1 is retained. The unique porous 3D hierarchical nanostructure improves electronic–ionic transport, mitigates the internal mechanical stress induced by the volume variations of the electrode upon cycling, and forms a 3D conductive network during cycling. No addition of any electrochemically inactive conductive agents or polymer binders is required. Therefore, binder‐free electrodes further avoid the uneven distribution of conductive carbon on the current collector due to physical mixing and the addition of an insulator (binder), which has benefits leading to outstanding electrochemical performance.     

All‐Organic Battery Composed of Thianthrene‐ and TCAQ‐Based Polymers

An all‐organic battery consisting of two redox‐polymers, namely poly(2‐vinylthianthrene) and poly(2‐methacrylamide‐TCAQ) is assembled. This all‐organic battery shows excellent performance characteristics, namely flat discharge plateaus, an output voltage exceeding 1.3 V, and theoretical capacities of both electrodes higher than 100 mA h g^?1. Both organic electrode materials are synthesized in two respective three synthetic steps using the free‐radical polymerization technique. Li‐organic batteries manufactured from these polymers prove their suitability as organic electrode materials. The cathode material poly(2‐vinylthianthrene) (3) displays a discharging plateau at 3.95 V versus Li⁺/Li and a discharge capacity of 105 mA h g^?1, corresponding to a specific energy of about 415 mW h g^?1. The anode material poly(2‐methacrylamide‐TCAQ) (7) exhibits an initial discharge capacity of 130 mA h g^?1, corresponding to 94% material activity. The combination of both materials results in an all‐organic battery with a discharge voltage of 1.35 V and an initial discharge capacity of 105 mA h g^?1 (95% material activity).     

Graphene Wrapped FeSe2 Nano‐Microspheres with High Pseudocapacitive Contribution for Enhanced Na‐Ion Storage

Pseudocapacitance is a Faradaic process that involves surface or near surface redox reactions. Increasing the pseudocapacitive contribution is one of the most effective means to improve the rate performance of electrode materials. In this study, graphene oxide is used as a template to in situ synthesize burr globule‐like FeSe₂/graphene hybrid (B‐FeSe₂/G) using a facile one‐step hydrothermal method. Structural characterization demonstrates that graphene layers not only wrap the surfaces of FeSe₂ particles, but also stretch into the interior of these particles, as a result of which the unique nano‐microsphere structure is successfully established. When serving as anode material for Na‐ion batteries, B‐FeSe₂/G hybrid displays high electrochemical performance in the voltage range of 0.5–2.9 V. The B‐FeSe₂/G hybrid has high reversible capacity of 521.6 mAh·g^?1 at 1.0 A g^?1. Meanwhile, after 400 cycles, high discharge capacity of 496.3 mAh g^?1 is obtained at a rate of 2.5 A g^?1, with a high columbic efficiency of 96.6% and less than 1.0% loss of discharge capacity. Even at the ultrahigh rate of 10 A g^?1, a specific capacity of 316.8 mAh g^?1 can be achieved. Kinetic analyses reveal that the excellent performance of the B‐FeSe₂/G hybrid is largely attributed to the high pseudocapacitive contribution induced by the special nano‐micro structure.     

Carbonized Chicken Eggshell Membranes with 3D Architectures as High‐Performance Electrode Materials for Supercapacitors

Supercapacitor electrode materials are synthesized by carbonizing a common livestock biowaste in the form of chicken eggshell membranes. The carbonized eggshell membrane (CESM) is a three‐dimensional macroporous carbon film composed of interwoven connected carbon fibers containing around 10 wt% oxygen and 8 wt% nitrogen. Despite a relatively low surface area of 221 m² g^?1, exceptional specific capacitances of 297 F g^?1 and 284 F g^?1 are achieved in basic and acidic electrolytes, respectively, in a 3‐electrode system. Furthermore, the electrodes demonstrate excellent cycling stability: only 3% capacitance fading is observed after 10 000 cycles at a current density of 4 A g^?1. These very attractive electrochemical properties are discussed in the context of the unique structure and chemistry of the material.     

Phase Transformation Induced Capacitance Activation for 3D Graphene‐CoO Nanorod Pseudocapacitor

Development of a pseudocapacitor over the integration of metal oxide on carbonaceous materials is a promising step towards energy storage devices with high energy and power densities. Here, a self‐assembled cobalt oxide (CoO) nanorod cluster on three‐dimensional graphene (CoO‐3DG) is synthesized through a facile hydrothermal method followed by heat treatment. As an additive‐free electrode, CoO‐3DG exhibits good electrochemical performance. Compared with CoO nanorod clusters grown on Ni foam (i.e., CoO‐Ni, ≈680 F g^?1 at 1 A g^?1 and ≈400 F g^?1 at 20 A g^?1), CoO‐3DG achieves much higher capacitance (i.e., ≈980 F g^?1 at 1 A g^?1 and ≈600 F g^?1 at 20 A g^?1) with excellent cycling stability of 103% retention of specific capacitance after 10 000 cycles. Furthermore, it shows an interesting activation process and instability with a redox reaction for CoO. In addition, the phase transformation from CoO nanorods to Co₃O₄ nanostructures was observed and investigated after charge and discharge process, which suggests the activation kinetics and the phase transformable nature of CoO based nanostructure. These observations demonstrate phase transformation with morphological change induced capacitance increasement in the emergent class of metal oxide materials for electrochemical energy storage device.     

Flexible and High‐Loading Lithium–Sulfur Batteries Enabled by Integrated Three‐In‐One Fibrous Membranes

Lithium–sulfur batteries are appealing as high‐energy storage systems and hold great application prospects in wearable and portable electronics. However, severe shuttle effects, low sulfur conductivity, and especially poor electrode mechanical flexibility restrict sulfur utilization and loading for practical applications. Herein, high‐flux, flexible, electrospun fibrous membranes are developed, which succeed in integrating three functional units (cathode, interlayer, and separator) into an efficient composite. This structure helps to eliminate negative interface effects, and effectively drives synergistic boosts to polysulfide confinement, electron transfer, and lithium‐ion diffusion. It delivers a high initial capacity of 1501 mA h g^?1 and a discharge capacity of 933 mA h g^?1 after 400 cycles, with slow capacity attenuation (0.069% per cycle). Even under high sulfur loading (13.2 mg cm^?2, electrolyte/sulfur ratio = 6 mL g^?1) or in an alternative folded state, this three‐in‐one membrane still exhibits high areal capacity (11.4 mA h cm^?2) and exceptional application performance (powering an array of over 30 light‐emitting diodes (LEDs)), highlighting its huge potential in high‐energy flexible devices.     

Silica Restricting the Sulfur Volatilization of Nickel Sulfide for High‐Performance Lithium‐Ion Batteries

Nickel sulfides are regarded as promising anode materials for advanced rechargeable lithium‐ion batteries due to their high theoretical capacity. However, capacity fade arising from significant volume changes during operation greatly limits their practical applications. Herein, confined NiS_x@C yolk–shell microboxes are constructed to address volume changes and confine the active material in the internal void space. Having benefited from the yolk–shell structure design, the prepared NiS_x@C yolk–shell microboxes display excellent electrochemical performance in lithium‐ion batteries. Particularly, it delivers impressive cycle stability (460 mAh g^?1 after 2000 cycles at 1 A g^?1) and superior rate performance (225 mAh g^?1 at 20 A g^?1). Furthermore, the lithium storage mechanism is ascertained with in situ synchrotron high‐energy X‐ray diffractions and in situ electrochemical impedance spectra. This unique confined yolk–shell structure may open up new strategies to create other advanced electrode materials for high performance electrochemical storage systems.