Structural Changes in Li2MnO3 Cathode Material for Li‐Ion Batteries

Structural changes in Li₂MnO₃ cathode material for rechargeable Li‐ion batteries are investigated during the first and 33^rd cycles. It is found that both the participation of oxygen anions in redox processes and Li⁺‐H⁺ exchange play an important role in the electrochemistry of Li₂MnO₃. During activation, oxygen removal from the material along with Li gives rise to the formation of a layered MnO₂‐type structure, while the presence of protons in the interslab region, as a result of electrolyte oxidation and Li⁺‐H⁺ exchange, alters the stacking sequence of oxygen layers. Li re‐insertion by exchanging already present protons reverts the stacking sequence of oxygen layers. The re‐lithiated structure closely resembles the parent Li₂MnO₃, except that it contains less Li and O. Mn⁴⁺ ions remain electrochemically inactive at all times. Irreversible oxygen release occurs only during activation of the material in the first cycle. During subsequent cycles, electrochemical processes seem to involve unusual redox processes of oxygen anions of active material along with the repetitive, irreversible oxidation of electrolyte species. The deteriorating electrochemical performance of Li₂MnO₃ upon cycling is attributed to the structural degradation caused by repetitive shearing of oxygen layers.     

Synthesis,Characterization, and Structural Modeling of High‐Capacity,Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells

It has become clear that cycling lithium‐oxygen cells in carbonate electrolytes is impractical, as electrolyte decomposition, triggered by oxygen reduction products, dominates the cell chemistry. This research shows that employing an α‐MnO₂/ramsdellite‐MnO₂ electrode/electrocatalyst results in the formation of lithium‐oxide‐like discharge products in propylene carbonate, which has been reported to be extremely susceptible to decomposition. X‐ray photoelectron data have shown that what are likely lithium oxides (Li₂O₂ and Li₂O) appear to form and decompose on the air electrode surface, particularly at the MnO₂ surface, while Li₂CO₃ is also formed. By contrast, cells without α‐MnO₂/ramsdellite‐MnO₂ fail rapidly in electrochemical cycling, likely due to the differences in the discharge product. Relatively high electrode capacities, up to 5000 mAh/g (carbon + electrode/electrocatalyst), have been achieved with non‐optimized air electrodes. Insights into reversible insertion reactions of lithium, lithium peroxide (Li₂O₂) and lithium oxide (Li₂O) in the tunnels of α‐MnO₂, and the reaction of lithium with ramsdellite‐MnO₂, as determined by first principles density functional theory calculations, are used to provide a possible explanation for some of the observed results. It is speculated that a Li₂O‐stabilized and partially‐lithiated electrode component, 0.15Li₂O·α‐Li_xMnO₂, that has Mn^4+/3+ character may facilitate the Li₂O₂/Li₂O discharge/charge chemistries providing dual electrode/electrocatalyst functionality.     

3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries

3D printing is becoming an efficient approach to facilely and accurately fabricate diverse complex architectures with broad applications. However, suitable inks and 3D print favorable architectures with high electrochemical performances for energy storage are still being explored. Here, sulfur copolymer‐graphene architectures with well‐designed periodic microlattices are 3D printed as a cathode for Li‐S batteries using a suitable ink composed of sulfur particles, 1,3‐diisopropenylbenzene (DIB), and condensed graphene oxide dispersion. Using thermal treatment, elemental sulfur can be reacted with DIB to produce sulfur copolymer, which can partially suppress the dissolution of polysulfides. Moreover, graphene in the architecture can provide high electrical conductivity for whole electrode. Hence, 3D printed sulfur copolymer‐graphene architecture exhibits a high reversible capacity of 812.8 mA h g^?1 and good cycle performance. Such a simple 3D printing approach can be further extended to construct many complex architectures for various energy storage devices.     

High‐Quality Graphene Microflower Design for High‐Performance Li–S and Al‐Ion Batteries

Poor quality and insufficient productivity are two main obstacles for the practical application of graphene in electrochemical energy storage. Here, high‐quality crumpled graphene microflower (GmF) for high‐performance electrodes is designed. The GmF possesses four advantages simultaneously: highly crystallized defect‐free graphene layers, low stacking degree, sub‐millimeter continuous surface, and large productivity with low cost. When utilized as carbon host for sulfur cathode, the GmF‐sulfur hybrid delivers decent areal capacities of 5.2 mAh cm^?2 at 0.1 C and 3.8 mAh cm^?2 at 0.5 C. When utilized as cathode of Al‐ion battery, the GmF affords a high capacity of 100 mAh g^?1 with 100% capacity retention after 5000 cycles and excellent rate capability from 0.1 to 20 A g^?1. This facile and large‐scale producible GmF represents a meaningful high‐quality graphene powder for practical energy storage technology. Meanwhile, this unique high‐quality graphene design provides an effective route to improve electrochemical properties of graphene‐based electrodes.     

Recent Advances in Non‐Aqueous Electrolyte for Rechargeable Li–O2 Batteries

The rechargeable Li–O₂ battery has attracted much attention over the past decades owing to its overwhelming advantage in theoretical specific energy density compared to state‐of‐the‐art Li‐ion batteries. Practical application requires non‐aqueous Li–O₂ batteries to stably obtain high reversible capacity, which highly depends on a suitable electrolyte system. Up to now, some critical challenges remain in developing desirable non‐aqueous electrolytes for Li–O₂ batteries. Herein, we will review the current status and challenges in non‐aqueous liquid electrolytes, ionic liquid electrolytes and solid‐state electrolytes of Li–O₂ batteries, as well as the perspectives on these issues and future development.     

Defect‐Engineered Ultrathin δ‐MnO2 Nanosheet Arrays as Bifunctional Electrodes for Efficient Overall Water Splitting

Recently, defect engineering has been used to intruduce half‐metallicity into selected semiconductors, thereby significantly enhancing their electrical conductivity and catalytic/electrocatalytic performance. Taking inspiration from this, we developed a novel bifunctional electrode consisting of two monolayer thick manganese dioxide (δ‐MnO₂) nanosheet arrays on a nickel foam, using a novel in‐situ method. The bifunctional electrode exposes numerous active sites for electrocatalytic rections and displays excellent electrical conductivity, resulting in strong performance for both HER and OER. Based on detailed structure analysis and density functional theory (DFT) calculations, the remarkably OER and HER activity of the bifunctional electrode can be attributed to the ultrathin δ‐MnO₂ nanosheets containing abundant oxygen vacancies lead to the formation od Mn³⁺ active sites, which give rise to half‐metallicity properties and strong H₂O adsorption. This synthetic strategy introduced here represents a new method for the development of non‐precious metal Mn‐based electrocatalysts for eddicient energy conversion.     

Critical Challenges in Rechargeable Aprotic Li–O2 Batteries

Rechargeable aprotic Li–O₂ batteries are one of the most promising next‐generation battery technologies that can deliver extremely high energy density. In the past decades, this technology has attracted worldwide attention, and considerable progress has been achieved. However, numerous critical scientific challenges remain to be solved for practical applications. A specific discussion of recent progress from the perspective of the stable aprotic Li–O₂ system with high energy efficiency is presented. The discussion is highlighted on the reaction mechanisms on air cathode, stability of cell components in semi‐open surroundings, and improvement of battery performance by catalyst design. Challenges and perspectives are also presented. This study provides an intensive understanding of aprotic Li–O₂ batteries and offers an important guideline for developing reversible and high‐efficiency Li–O₂ batteries.     

Li2O:Li–Mn–O Disordered Rock‐Salt Nanocomposites as Cathode Prelithiation Additives for High‐Energy Density Li‐Ion Batteries

The irreversible loss of lithium from the cathode material during the first cycles of rechargeable Li‐ion batteries notably reduces the overall cell capacity. Here, a new family of sacrificial cathode additives based on Li₂O:Li_2/3Mn_1/3O_5/6 composites synthesized by mechanochemical alloying is reported. These nanocomposites display record (but irreversible) capacities within the Li–Mn–O systems studied, of up to 1157 mAh g^?1, which represents an increase of over 300% of the originally reported capacity in Li_2/3Mn_1/3O_5/6 disordered rock salts. Such a high irreversible capacity is achieved by the reaction between Li₂O and Li_2/3Mn_1/3O_5/6 during the first charge, where electrochemically active Li₂O acts as a Li⁺ donor. A 13% increase of the LiFePO₄ and LiCoO₂ first charge gravimetric capacities is demonstrated by the addition of only 2 wt% of the nanosized composite in the cathode mixture. This result shows the great potential of these newly discovered sacrificial additives to counteract initial losses of Li⁺ ions and improve battery performance.     

Enhanced Cycling Performance of Li‐O2 Batteries by the Optimized Electrolyte Concentration of LiTFSA in Glymes

A series of non‐aqueous electrolytes were prepared by dissolving lithium bis(trifluoromethylsulfonyl)amide (LiTFSA) in triglyme and tetraglyme (Gx, x = 3 and 4), respectively, with varied molar ratios. With the electrolytes the cycling performance of Li‐O₂ batteries showed a strong dependence on the molar ratios between LiTFSA and Gx. It was found that the molar ratio of 1 to 5 was critical for the cycling‐performance of Li‐O₂ batteries. High stability over 20 discharge–recharge cycles at 500 mA/g_carbon and in an O₂ flow was obtained in LiTFSA‐(Gx)₅ (x = 3 and 4). The discharge product at cathode could be directly detected and identified as the dominant crystalline product Li₂O₂ on the 1st and 20th discharged electrodes using X‐ray diffraction technique (XRD), which indicates rechargeability and feasibility of the electrolytes LiTFSA‐(Gx)₅ (x = 3 and 4) for Li‐O₂ batteries. At 1000 mA/g_carbon their capacities could be stabilized for 10 cycles. To our knowledge, this behavior of dependence of cycling performance of Li‐O₂ batteries on the concentration of Li salts is presented here for the first time, and it may be extended to other Li salts and solvents and suggest a new route for screening cycling‐stable electrolytes for Li‐O₂ batteries.     

In Situ Synthesis of Hierarchical Core Double‐Shell Ti‐Doped LiMnPO4@NaTi2(PO4)3@C/3D Graphene Cathode with High‐Rate Capability and Long Cycle Life for Lithium‐Ion Batteries

Olivine‐type LiMnPO₄ (LMP) cathodes have gained enormous attraction for Li‐ion batteries (LIBs), thanks to their large theoretical capacity, high discharge platform, and thermal stability. However, it is still hugely challenging to achieve encouraging Li‐storage behaviors owing to their low electronic conductivity and limited lithium diffusion. Herein, the core double‐shell Ti‐doped LMP@NaTi₂(PO₄)₃@C/3D graphene (TLMP@NTP@C/3D‐G) architecture is designed and constructed via an in situ synthetic methodology. A continuous electronic conducting network is formed with the unfolded 3D‐G and conducting carbon nanoshell. The Nasicon‐type NTP nanoshell with exceptional ionic conductivity efficiently inhibits gradual enrichment in by‐products, and renders low surfacial/interfacial electron/ion‐diffusion resistance. Besides, a rapid Li⁺ diffusion in the bulk structure is guaranteed with the reduction of Mn_Li+˙ antisite defects originating from the synchronous Ti‐doping. Benefiting from synergetic contributions from these design rationales, the integrated TLMP@NTP@C/3D‐G cathode yields high initial discharge capacity of ≈164.8 mAh g^?1 at 0.05 C, high‐rate reversible capacity of ≈116.2 mAh g^?1 at 10 C, and long‐term capacity retention of ≈93.3% after 600 cycles at 2 C. More significantly, the electrode design developed here will exert significant impact upon constructing other advanced cathodes for high‐energy/power LIBs.     

Efficient Li‐Ion‐Conductive Layer for the Realization of Highly Stable High‐Voltage and High‐Capacity Lithium Metal Batteries

Recently, a consensus has been reached that using lithium metal as an anode in rechargeable Li‐ion batteries is the best way to obtain the high energy density necessary to power electronic devices. Challenges remain, however, with respect to controlling dendritic Li growth on these electrodes, enhancing compatibility with carbonate‐based electrolytes, and forming a stable solid–electrolyte interface layer. Herein, a groundbreaking solution to these challenges consisting in the preparation of a Li₂TiO₃ (LT) layer that can be used to cover Li electrodes via a simple and scalable fabrication method, is suggested. Not only does this LT layer impede direct contact between electrode and electrolyte, thus avoiding side reactions, but it assists and expedites Li‐ion flux in batteries, thus suppressing Li dendrite growth. Other effects of the LT layer on electrochemical performance are investigated by scanning electron microscopy, electrochemical impedance spectroscopy, and galvanostatic intermittent titration technique analyses. Notably, LT layer‐incorporating Li cells comprising high‐capacity/voltage cathodes with reasonably high mass loading (LiNi_0.8Co_0.1Mn_0.1O₂, LiNi_0.5Mn_1.5O₄, and LiMn₂O₄) show highly stable cycling performance in a carbonate‐based electrolyte. Therefore, it is believed that the approach based on the LT layer can boost the realization of high energy density lithium metal batteries and next‐generation batteries.     

Theaflavin‐3,3´‐digallate increases the antibacterial activity of β‐lactam antibiotics by inhibiting metallo‐β‐lactamase activity

Metallo‐β‐lactamases (MBLs) are some of the best known β‐lactamases produced by common Gram‐positive and Gram‐negative pathogens and are crucial factors in the rise of bacterial resistance against β‐lactam antibiotics. Although many types of β‐lactamase inhibitors have been successfully developed and used in clinical settings, no MBL inhibitors have been identified to date. Nitrocefin, checkerboard and time‐kill assays were used to examine the enzyme behaviour in vitro. Molecular docking calculation, molecular dynamics simulation, calculation of the binding free energy and ligand‐residue interaction decomposition were used for mechanistic research. The behaviour of the enzymes in vivo was investigated by a mouse infection experiment. We showed that theaflavin‐3,3´‐digallate (TFDG), a natural compound lacking antibacterial activities, can inhibit the hydrolysis of MBLs. In the checkerboard and time‐kill assays, we observed a synergistic effect of TFDG with β‐lactam antibiotics against methicillin‐resistant Staphylococcus aureus BAA1717. Molecular dynamics simulations were used to identify the mechanism of the inhibition of MBLs by TFDG, and we observed that the hydrolysis activity of the MBLs was restricted by the binding of TFDG to Gln242 and Ser369. Furthermore, the combination of TFDG with β‐lactam antibiotics showed effective protection in a mouse Staphylococcus aureus pneumonia model. These findings suggest that TFDG can effectively inhibit the hydrolysis activity of MBLs and enhance the antibacterial activity of β‐lactam antibiotics against pathogens in vitro and in vivo.     

Photoluminescence imaging of europium (III)‐doped γ‐Al2O3 nanofiber structures

Aluminium oxide (Al₂O₃) has widely been used for catalysts, insulators, and composite materials for diverse applications. Herein, we demonstrated if γ‐Al₂O₃ was useful as a luminescence support material for europium (Eu) (III) activator ion. The hydrothermal method and post‐thermal treatment at 800°C were employed to synthesize Eu(III)‐doped γ‐Al₂O₃ nanofibre structures. Luminescence characteristics of Eu(III) ions in Al₂O₃ matrix were fully understood by taking 2D and 3D‐photoluminescence imaging profiles. Various sharp emissions between 580 to 720 nm were assigned to the ⁵D₀→⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu(III) activators. On the basis of X‐ray diffraction crystallography, Auger elemental mapping and the asymmetry ratio, Eu(III) ions were found to be well doped into the γ‐Al₂O₃ matrix at a low (1 mol%) doping level. A broad emission at 460 nm was substantially increased upon higher (2 mol%) Eu(III) doping due to defect creation. The first 3D photoluminescence imaging profiles highlight detailed understanding of emission characteristics of Eu(III) ions in Al oxide‐based phosphor materials and their potential applications.