Boosting Power‐Generating Performance of Triboelectric Nanogenerators via Artificial Control of Ferroelectric Polarization and Dielectric Properties

Low output current represents a critical challenge that has interrupted the use of triboelectric nanogenerators (TNGs) in a wide range of applications as sustainable power sources. Many approaches (e.g., operation at high frequency, parallel stacks of individual devices, and hybridization with other energy harvesters) remain limited in solving the challenge of low output current from TNGs. Here, a nanocomposite material system having a superior surface charge density as a triboelectric active material is reported. The nanocomposite material consists of a high dielectric ceramic material, barium titanate, showing great charge‐trapping capability, together with a ferroelectric copolymer matrix, Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), with electrically manipulated polarization with strong triboelectric charge transfer characteristics. Based on a contact potential difference study showing that poled P(VDF‐TrFE) has 18 times higher charge attracting properties, a fraction between two components is optimized. Boosting power‐generating performance is achieved for 1130 V of output voltage and 1.5 mA of output current with this ferroelectric composite‐based TNG, under 6 kgf of pushing force at 5 Hz. An enormously faster charging property than traditional polymer film‐based TNGs is demonstrated in this study. Finally, the charging of a self‐powering smartwatch with a charging management circuit system with no external power sources is demonstrated successfully.     

Rationally Designed Dual‐Mode Triboelectric Nanogenerator for Harvesting Mechanical Energy by Both Electrostatic Induction and Dielectric Breakdown Effects

With the advantages of its light weight, low cost, and high efficiency especially at low operation frequency, the triboelectric nanogenerator (TENG) is considered to be a potential solution for self‐powered sensor networks and large‐scale renewable blue energy. However, the conventional TENG converts mechanical energy into electrical energy only via either electrostatic induction or electrostatic breakdown. Here, a novel dual‐mode TENG is presented, which can simultaneously harvest mechanical energy by electrostatic induction and dielectric breakdown in a single device. Based on the complementary working mechanism, it achieves a great improvement in the output performance with the sum of two TENGs via a single mechanism and reveals the effect of dielectric layer thickness on the triboelectrification, electrostatic induction, and air breakdown. This study establishes a new methodology to optimize TENGs and provides a new tool to investigate the triboelectrification, electrostatic induction and dielectric breakdown simultaneously.     

Networks of High Performance Triboelectric Nanogenerators Based on Liquid–Solid Interface Contact Electrification for Harvesting Low‐Frequency Blue Energy

Blue energy harvested from the ocean is an important and promising renewable energy for the sustainable development of society. Triboelectric nanogenerators (TENGs) are considered one of the most promising approaches for harvesting blue energy. In this work, a liquid–solid‐contact triboelectric nanogenerator (LS TENG) is fabricated to enhance the friction and magnify energy output by 48.7 times, when compared with the solid–solid‐contact TENG with the same area. The buoy‐like LS TENG can harvest energy from different types of low‐frequency vibration (including up–down, shaking, and rotation movements). Moreover, the outputs of the LS TENGs network can reach 290 µA, 16 725 nC, and 300 V, and the LS TENGs network can directly power hundreds of LEDs and drive a radio frequency emitter to form a self‐powered wireless save our souls (SOS) system for ocean emergencies. This work renders an innovative and effective approach toward large‐scale blue energy harvesting and applications.     

Significantly Enhanced Electrostatic Energy Storage Performance of Flexible Polymer Composites by Introducing Highly Insulating‐Ferroelectric Microhybrids as Fillers

A hybrid nanoparticle, consisting of BaTiO₃ nanoparticles tightly embedded in bronnitride (BN) nanosheets, has been fabricated based on a daring supposition that BN may act as a host to incorporate ferroelectric nanoparticles to improve insulation and polarization under a high electric field. Using the hybrids as fillers in poly(vinylidene fluoride) (PVDF) composites, a high electric breakdown strength (E_b ≈580 kV/mm), which is 1.76 times of the PVDF film, is obtained when the filler content is 5 wt%. A large displacement (9.3 µC/cm² under 580 kV/mm) is observed so as to obtain a high discharged energy density (U_d ≈17.6 J/cm³) of the BT@BN/PVDF composites, which is 2.8 times of the PVDF film. The enhancement ratio of E_b achieved in this study demonstrates the highest among the reported results. This hybrid structure of fillers provides an effective way to adjust and improve the energy storage properties of the polymer‐based dielectrics.     

Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

Strategic Escape Direction: Orientation,Turning, and Escape Trajectories of Zebra‐Tailed Lizards (Callisaurus draconoides)

A prey's body orientation relative to a predator's approach path may affect risk of fleeing straight ahead. Consequently, prey often turn before fleeing. Relationships among orientation, turn, and escape angles and between these angles and predation risk have not been studied in terrestrial vertebrates and have rarely been studied in the field. Escape angles are expected to lead away from predators and be highly variable to avoid being predictable by predators. Using approach speed as a risk factor, we studied these issues in the zebra‐tailed lizard, Callisaurus draconoides. Lizards fled away from human simulated predators, but most did not flee straight away. Escape angles were variable, as expected under the unpredictability hypothesis, and had modes at nearly straight away (i.e., 0°) and nearly perpendicular to the predator's approach path (90°). The straight away mode suggests maximal distancing from the predator; the other mode suggests maintaining ability to monitor the predator or possibly an influence of habitat features such as obstacles and refuges that differ among directions. Turn angles were larger when orientation was more toward the predator, and escape angles were closer to straight away when turn angles were larger. Turning serves to reach a favorable fleeing direction. When orientation angle was more toward the predator, escape angle was unaffected, suggesting that turn angle compensates completely for increased risk of orientation toward the predator. When approached more rapidly, lizards fled more nearly straight away, as expected under greater predation risk. Turn angles were unrelated to approach speed.     

High‐Energy,High‐Rate,Lithium–Sulfur Batteries: Synergetic Effect of Hollow TiO2‐Webbed Carbon Nanotubes and a Dual Functional Carbon‐Paper Interlayer

A novel nanocomposite cathode consisting of sulfur and hollow‐mesoporous titania (HMT) embedded within carbon nanotubes (CNT), which is designated as S‐HMT@CNT, has been obtained by encapsulating elemental sulfur into the pores of hollow‐mesoporous, spherical TiO₂ particles that are connected via CNT. A carbon‐paper interlayer, referred to as dual functional porous carbon wall (DF‐PCW), has been obtained by filling the voids in TiO₂ spheres with carbon and then etching the TiO₂ template with a chemical process. The DF‐PCW interlayer provides a medium for scavenging the lithium polysulfides and suppressing them from diffusing to the anode side when it is inserted between the sulfur cathode and the separator. Lithium–sulfur cells fabricated with the thus prepared S‐HMT@CNT cathode and the DF‐PCW interlayer exhibit superior performance due to the containment of sulfur in TiO₂ and improved lithium–ion and electron transports. The Li–S cells display high capacity with excellent capacity retention at rates as high as 1C, 2C, and 5C rates.     

Multifunctional Effect of p‐Doping,Antireflection, and Encapsulation by Polymeric Acid for High Efficiency and Stable Carbon Nanotube‐Based Silicon Solar Cells

Silicon solar cells among different types of solar energy harvesters have entered the commercial market owing to their high power conversion efficiency and stability. By replacing the electrode and the p‐type layer by a single layer of carbon nanotubes, the device can be further simplified. This greatly augments the attractiveness of silicon solar cells in the light of raw material shortages and the solar payback period, as well as lowering the fabrication costs. However, carbon nanotube‐based silicon solar cells still lack device efficiency and stability. These can be improved by chemical doping, antireflection coating, and encapsulation. In this work, the multifunctional effects of p‐doping, antireflection, and encapsulation are observed simultaneously, by applying a polymeric acid. This method increases the power conversion efficiency of single‐walled carbon nanotube‐based silicon solar cells from 9.5% to 14.4% and leads to unprecedented device stability of more than 120 d under severe conditions. In addition, the polymeric acid‐applied carbon nanotube‐based silicon solar cells show excellent chemical and mechanical robustness. The obtained stable efficiency stands the highest among the reported carbon nanotube‐based silicon solar cells.     

Stereoselective Determination of a Novel Chiral Insecticide,Sulfoxaflor, in Brown Rice,Cucumber and Apple by Normal‐Phase High‐Performance Liquid Chromatography

An effective high‐performance liquid chromatography method was developed for the stereoselective determination of a new sulfoximines insecticide, sulfoxaflor, in brown rice, cucumber and apple. Target compounds were extracted with acetonitrile and an aliquot cleaned with Cleanert PestiCarb/PSA (primary and secondary amine) cartridge. Five polysaccharide‐based columns were investigated on the separation of sulfoxaflor stereoisomers and the best was achieved on a ChromegaChiral CCA column with n‐hexane/ethanol/methanol (90:2:8, v/v/v) as mobile phase by UV detection at 220 nm at 20ºC. The resolutions of the four stereoisomers were 1.85, 1.54 and 3.08, and the elution order was identified by optical rotation and stereoisomers ratio. The mean recoveries of sulfoxaflor stereoisomers ranged from 77.1% to 99.3%, with relative standard deviations less than 8.9% at three concentration levels in all matrices. The limits of detection for all stereoisomers varied from 0.05 mg/kg to 0.07 mg/kg, while the limit of quantification did not exceed 0.22 mg/kg. The method was then successfully applied to determine the sulfoxaflor stereoisomers in authentic samples, confirming that it is convenient and reliable for stereoselective determination of sulfoxaflor stereoisomers in food. Chirality 26:114–120, 2014. © 2014 Wiley Periodicals, Inc.