High Throughput Discovery of Solar Fuels Photoanodes in the CuO–V2O5 System

Solar photoelectrochemical generation of fuel is a promising energy technology yet the lack of an efficient, robust photoanode remains a primary materials challenge in the development and deployment of solar fuels generators. Metal oxides comprise the most promising class of photoanode materials, but no known material meets the demanding requirements of low band gap energy, photoelectrocatalysis of the oxygen evolution reaction (OER), and stability under highly oxidizing conditions. Here, the identification of new photoelectroactive materials is reported through a strategic combination of combinatorial materials synthesis, high‐throughput photoelectrochemistry, optical spectroscopy, and detailed electronic structure calculations. Four photoelectrocatalyst phases, α ‐Cu₂V₂O₇, β ‐Cu₂V₂O_7, γ ‐Cu₃V₂O₈, and Cu₁₁V₆O₂₆, are reported with band gap energy at or below 2 eV. The photoelectrochemical properties and 30 min stability of these copper vanadate phases are demonstrated in three different aqueous electrolytes (pH 7, pH 9, and pH 13), with select combinations of phase and electrolyte exhibiting unprecedented photoelectrocatalytic stability for metal oxides with sub‐2 eV band gap. Through integration of experimental and theoretical techniques, new structure‐property relationships are determined and establish CuO–V₂O₅ as the most prominent composition system for OER photoelectrocatalysts, providing crucial information for materials genomes initiatives and paving the way for continued development of solar fuels photoanodes.     

Rational Design of Metal Oxide–Based Cathodes for Efficient Dye‐Sensitized Solar Cells

Recently, there is an urgent need for alternative energy resources due to the nonrenewable nature of fossil fuels and increasing CO₂ greenhouse gas emissions. The photovoltaic technologies which directly utilize the abundant and sustainable solar energy are critical. Among various photovoltaic devices (solar cells), dye‐sensitized solar cells (DSSCs) have gained increasing attention due to their high efficiency and easy fabrication process in the past decade. The cathode is a critical part in DSSCs while the benchmark Pt cathode suffers from high cost and scarcity. Thus, the development of alternative Pt‐free cathodes has attracted significant attention with the aim to heighten the cost competitiveness of DSSCs. Among various cathodes, metal oxides are of growing interest due to their superior activity, robust stability, and low cost. Simple oxides such as WO₃ and SnO₂ are used as cathodes for DSSCs. Considering the fixed atomic environment in simple oxides, complex oxides are more attractive as cathodes because of their more flexible physical and chemical properties. This review attempts to present the rational design of simple/complex metal oxide–based cathodes in DSSCs and then to provide useful guidance for the future design of Pt‐free cathodes. The demonstrated design strategies can be extended to other electrocatalysis‐based applications.     

Metal Halide Perovskites for Solar‐to‐Chemical Fuel Conversion

This review article presents and discusses the recent progress made in the stabilization, protection, improvement, and design of halide perovskite‐based photocatalysts, photoelectrodes, and devices for solar‐to‐chemical fuel conversion. With the target of water splitting, hydrogen iodide splitting, and CO₂ reduction reactions, the strategies established for halide perovskites used in photocatalytic particle‐suspension systems, photoelectrode thin‐film systems, and photovoltaic‐(photo)electrocatalysis tandem systems are organized and introduced. Moreover, recent achievements in discovering new and stable halide perovskite materials, developing protective and functional shells and layers, designing proper reaction solution systems, and tandem device configurations are emphasized and discussed. Perspectives on the future design of halide perovskite materials and devices for solar‐to‐chemical fuel conversion are provided. This review may serve as a guide for researchers interested in utilizing halide perovskite materials for solar‐to‐chemical fuel conversion.     

Bifunctional Electrocatalytic Activity of Boron‐Doped Graphene Derived from Boron Carbide

A single material that can perform water oxidation and oxygen reduction reactions (ORR), also called bifunctional catalyst, represents a novel concept that emerged from recent materials research and that has led to applications in new‐generation energy‐storage systems, such as regenerative fuel cells. Here, metal/metal‐oxide free, doped graphene derived from rhombohedral boron carbide (B₄C) is demonstrated to be an effective bifunctional catalyst for the first time. B₄C, one of the hardest materials in nature next to diamond and cubic boron nitride, is converted and separated in bulk to form heteroatom (boron, B) doped graphene (BG, yield ≈7% by weight, after the first cycle). This structural conversion of B₄C to graphene is accompanied by in situ boron doping and results in the formation of an electrochemically active material from a non‐electrochemically active material, broadening its potential for application in various energy‐related technologies. The electrocatalytic efficacy of BG is studied using various voltammetric techniques. The results show a four‐electron transfer mechanism as well as a high methanol tolerance and stability towards ORR. The results are comparable to those from commercial 20 wt% Pt/C in terms of performance. Furthermore, the bifunctionality of the BG is also demonstrated by its performance in water oxidation.     

Modifying La0.6Sr0.4MnO3 Perovskites with Cr Incorporation for Fast Isothermal CO2‐Splitting Kinetics in Solar‐Driven Thermochemical Cycles

Perovskites are promising oxygen carriers for solar‐driven thermochemical fuel production due to higher oxygen exchange capacity. Despite their higher fuel yield capacity, La_0.6Sr_0.4MnO₃ perovskite materials present slow CO₂‐splitting kinetics compared with state‐of‐the‐art CeO₂. In order to improve the CO production rates, the incorporation of Cr in La_0.6Sr_0.4MnO₃ is explored based on thermodynamic calculations that suggest an enhanced driving force toward CO₂ splitting at high temperatures for La_0.6Sr_0.4Cr_xMn_1?xO₃ perovskites. Here, reported is a threefold faster CO fuel production for La_0.6Sr_0.4Cr_0.85Mn_0.15O₃ compared to conventional La_0.6Sr_0.4MnO₃, and twofold faster than CeO₂ under isothermal redox cycling at 1400 °C, and high stability upon long‐term cycling without any evidence of microstructural degradation. The findings suggest that with the proper design in terms of transition metal ion doping, it is possible to adjust perovskite compositions and reactor conditions for improved solar‐to‐fuel thermochemical production under nonconventional solar‐driven thermochemical cycling schemes such as the here presented near isothermal operation.     

Modeling Thermochemical Solar‐to‐Fuel Conversion: CALPHAD for Thermodynamic Assessment Studies of Perovskites,Exemplified for (La,Sr)MnO3

Two‐step solar thermochemical fuel production has the potential to reduce global greenhouse gas emissions and replace fossil fuels. The success of the technology relies on the development of materials with high thermochemical efficiency. Perovskites with the general structure ABO₃ have received much attention recently due to impressive fuel productivity and their amenability of substituting and doping both A‐ and B‐site. Despite the potential of perovskites for solar‐to‐fuel conversion, literature on their solar thermochemical efficiency is scarce and finding the best chemical composition and optimum operation conditions is unknown. For this purpose, this study suggests to use Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) data libraries to access the relevant thermodynamic properties of perovskites. This work demonstrates the usefulness of employing CALPHAD data by a full thermodynamic study of the model case compositions of La_1–xSr_xMnO_3–δ. This study uses data on oxygen‐nonstoichiometry and heat capacity in the temperature range of 1073–1873 K relevant for solar‐to‐fuel. Unlike earlier thermodynamic assessments of perovskites that rely on a single literature source and a limited temperature range, the CALPHAD approach takes all available data in literature into consideration. Thermochemical equilibrium models of fuel yields are accompanied by validations toward experimental results in literature, and this study highlights the effects of strontium doping level on the efficiency.     

(040)‐Crystal Facet Engineering of BiVO4 Plate Photoanodes for Solar Fuel Production

A (040)‐crystal facet engineered BiVO₄ ((040)‐BVO) photoanode is investigated for solar fuel production. The (040)‐BVO photoanode is favorable for improved charge carrier mobility and high photocatalytic active sites for solar light energy conversion. This crystal facet design of the (040)‐BVO photoanode leads to an increase in the energy conversion efficiency for solar fuel production and an enhancement of the oxygen evolution rate. The photocurrent density of the (040)‐BVO photoanode is determined to be 0.94 mA cm^?2 under AM 1.5 G illumination and produces 42.1% of the absorbed photon‐to‐current conversion efficiency at 1.23 V (vs RHE, reversible hydrogen electrode). The enhanced charge separation efficiency and improved charge injection efficiency driven by (040) facet can produce hydrogen with 0.02 mmol h^?1 at 1.23 V. The correlation between the (040)‐BVO photoanode and the solar fuel production is investigated. The results provide a promising approach for the development of solar fuel production using a BiVO₄ photoanode.     

Controlled Atomic Solubility in Mn‐Rich Composite Material to Achieve Superior Electrochemical Performance for Li‐Ion Batteries

The quest for high energy density and high power density electrode materials for lithium‐ion batteries has been intensified to meet strongly growing demand for powering electric vehicles. Conventional layered oxides such as Co‐rich LiCoO₂ and Ni‐rich Li(Ni_xMn_yCo_z)O₂ that rely on only transition metal redox reaction have been faced with growing constraints due to soaring price on cobalt. Therefore, Mn‐rich electrode materials excluding cobalt would be desirable with respect to available resources and low cost. Here, the strategy of achieving both high energy density and high power density in Mn‐rich electrode materials by controlling the solubility of atoms between phases in a composite is reported. The resulting Mn‐rich material that is composed of defective spinel phase and partially cation‐disordered layered phase can achieve the highest energy density, ≈1100 W h kg^?1 with superior power capability up to 10C rate (3 A g^?1) among other reported Mn‐rich materials. This approach provides new opportunities to design Mn‐rich electrode materials that can achieve high energy density and high power density for Li‐ion batteries.     

Electron‐Beam‐Evaporated Nickel Oxide Hole Transport Layers for Perovskite‐Based Photovoltaics

High‐quality charge carrier transport materials are of key importance for stable and efficient perovskite‐based photovoltaics. This work reports on electron‐beam‐evaporated nickel oxide (NiO_x) layers, resulting in stable power conversion efficiencies (PCEs) of up to 18.5% when integrated into solar cells employing inkjet‐printed perovskite absorbers. By adding oxygen as a process gas and optimizing the layer thickness, transparent and efficient NiO_x hole transport layers (HTLs) are fabricated, exhibiting an average absorptance of only 1%. The versatility of the material is demonstrated for different absorber compositions and deposition techniques. As another highlight of this work, all‐evaporated perovskite solar cells employing an inorganic NiO_x HTL are presented, achieving stable PCEs of up to 15.4%. Along with good PCEs, devices with electron‐beam‐evaporated NiO_x show improved stability under realistic operating conditions with negligible degradation after 40 h of maximum power point tracking at 75 °C. Additionally, a strong improvement in device stability under ultraviolet radiation is found if compared to conventional perovskite solar cell architectures employing other metal oxide charge transport layers (e.g., titanium dioxide). Finally, an all‐evaporated perovskite solar mini‐module with a NiO_x HTL is presented, reaching a PCE of 12.4% on an active device area of 2.3 cm².     

Rational Design of Metal‐Organic Framework Derived Hollow NiCo2O4 Arrays for Flexible Supercapacitor and Electrocatalysis

Metal‐organic frameworks (MOFs) are promising porous precursors for the construction of various functional materials for high‐performance electrochemical energy storage and conversion. Herein, a facile two‐step solution method to rational design of a novel electrode of hollow NiCo₂O₄ nanowall arrays on flexible carbon cloth substrate is reported. Uniform 2D cobalt‐based wall‐like MOFs are first synthesized via a solution reaction, and then the 2D solid nanowall arrays are converted into hollow and porous NiCo₂O₄ nanostructures through an ion‐exchange and etching process with an additional annealing treatment. The as‐obtained NiCo₂O₄ nanostructure arrays can provide rich reaction sites and short ion diffusion path. When evaluated as a flexible electrode material for supercapacitor, the as‐fabricated NiCo₂O₄ nanowall electrode shows remarkable electrochemical performance with excellent rate capability and long cycle life. In addition, the hollow NiCo₂O₄ nanowall electrode exhibits promising electrocatalytic activity for oxygen evolution reaction. This work provides an example of rational design of hollow nanostructured metal oxide arrays with high electrochemical performance and mechanical flexibility, holding great potential for future flexible multifunctional electronic devices.     

Effect of Electron‐Transport Material on Light‐Induced Degradation of Inverted Planar Junction Perovskite Solar Cells

This paper presents a systematic study of the influence of electron‐transport materials on the operation stability of the inverted perovskite solar cells under both laboratory indoor and the natural outdoor conditions in the Negev desert. It is shown that all devices incorporating a Phenyl C₆₁ Butyric Acid Methyl ester ([60]PCBM) layer undergo rapid degradation under illumination without exposure to oxygen and moisture. Time‐of‐flight secondary ion mass spectrometry depth profiling reveals that volatile products from the decomposition of methylammonium lead iodide (MAPbI₃) films diffuse through the [60]PCBM layer, go all the way toward the top metal electrode, and induce its severe corrosion with the formation of an interfacial AgI layer. On the contrary, alternative electron‐transport material based on the perylendiimide derivative provides good isolation for the MAPbI₃ films preventing their decomposition and resulting in significantly improved device operation stability. The obtained results strongly suggest that the current approach to design inverted perovskite solar cells should evolve with respect to the replacement of the commonly used fullerene‐based electron‐transport layers with other types of materials (e.g., functionalized perylene diimides). It is believed that these findings pave a way toward substantial improvements in the stability of the perovskite solar cells, which are essential for successful commercialization of this photovoltaic technology.     

Electrochemical CO2 Reduction with Atomic Iron‐Dispersed on Nitrogen‐Doped Graphene

Electrochemical reduction of CO₂ provides an opportunity to reach a carbon‐neutral energy recycling regime, in which CO₂ emissions from fuel use are collected and converted back to fuels. The reduction of CO₂ to CO is the first step toward the synthesis of more complex carbon‐based fuels and chemicals. Therefore, understanding this step is crucial for the development of high‐performance electrocatalyst for CO₂ conversion to higher order products such as hydrocarbons. Here, atomic iron dispersed on nitrogen‐doped graphene (Fe/NG) is synthesized as an efficient electrocatalyst for CO₂ reduction to CO. Fe/NG has a low reduction overpotential with high Faradic efficiency up to 80%. The existence of nitrogen‐confined atomic Fe moieties on the nitrogen‐doped graphene layer is confirmed by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure analysis. The Fe/NG catalysts provide an ideal platform for comparative studies of the effect of the catalytic center on the electrocatalytic performance. The CO₂ reduction reaction mechanism on atomic Fe surrounded by four N atoms (Fe–N₄) embedded in nitrogen‐doped graphene is further investigated through density functional theory calculations, revealing a possible promotional effect of nitrogen doping on graphene.     

Cobalt Polypyridyl Complexes as Transparent Solution‐Processable Solid‐State Charge Transport Materials

Charge transport materials (CTMs) are traditionally inorganic semiconductors or metals. However, over the past few decades, new classes of solution‐processable CTMs have evolved alongside new concepts for fabricating electronic devices at low cost and with exceptional properties. The vast majority of these novel materials are organic compounds and the use of transition metal complexes in electronic applications remains largely unexplored. Here, a solution‐processable solid‐state charge transport material composed of a blend of [Co(bpyPY4)](OTf)₂ and Co(bpyPY4)](OTf)₃ where bpyPY4 is the hexadentate ligand 6,6′‐bis(1,1‐di(pyridin‐2‐yl)ethyl)‐2,2′‐bipyridine and OTf^? is the trifluoromethanesulfonate anion is reported. Surprisingly, these films exhibit a negative temperature coefficient of conductivity (dσ/dT) and non‐Arrhenius behavior, with respectable solid‐state conductivities of 3.0 S m^?1 at room temperature and 7.4 S m^?1 at 4.5 K. When employed as a CTM in a solid‐state dye‐sensitized solar cell, these largely amorphous, transparent films afford impressive solar energy conversion efficiencies of up to 5.7%. Organic–inorganic hybrid materials with negative temperature coefficients of conductivity generally feature extended flat π‐systems with strong π–π interactions or high crystallinity. The lack of these features promotes [Co(bpyPY4)](OTf)_{2+ x} films as a new class of CTMs with a unique charge transport mechanism that remains to be explored.     

Triblock‐Terpolymer‐Directed Self‐Assembly of Mesoporous TiO2: High‐Performance Photoanodes for Solid‐State Dye‐Sensitized Solar Cells

A new self‐assembly platform for the fast and straightforward synthesis of bicontinuous, mesoporous TiO₂ films is presented, based on the triblock terpolymer poly(isoprene ‐ b ‐ styrene ‐ b ‐ ethylene oxide). This new materials route allows the co‐assembly of the metal oxide as a fully interconnected minority phase, which results in a highly porous photoanode with strong advantages over the state‐of‐the‐art nanoparticle‐based photoanodes employed in solid‐state dye‐sensitized solar cells. Devices fabricated through this triblock terpolymer route exhibit a high availability of sub‐bandgap states distributed in a narrow and low enough energy band, which maximizes photoinduced charge generation from a state‐of‐the‐art organic dye, C220. As a consequence, the co‐assembled mesoporous metal oxide system outperformed the conventional nanoparticle‐based electrodes fabricated and tested under the same conditions, exhibiting solar power‐conversion efficiencies of over 5%.     

Exploiting Lithium‐Depleted Cathode Materials for Solid‐State Li Metal Batteries

Solid‐state lithium metal batteries (SSLMBs) may become one of the high‐energy density storage devices for the next generation of electric vehicles. High safety and energy density can be achieved by utilizing solid electrolytes and Li metal anodes. Therefore, developing cathode materials which can match with Li metal anode efficiently is indispensable. In SSLMBs, Li metal anodes can afford the majority of active lithium ions, then lithium‐depleted cathode materials can be a competitive candidate to achieve high gravimetric energy density as well as save lithium resources. Li_0.33MnO₂ lithium‐depleted material is chosen, which also has the advantages of low synthesis temperature and low cost (cobalt‐free). Notably, solid‐state electrolyte can greatly alleviate the problem of manganese dissolution in the electrolyte, which is beneficial to improve the cycling stability of the battery. Thus, SSLMBs enable practical applications of lithium‐depleted cathode materials.     

Fabrication of Low‐Tortuosity Ultrahigh‐Area‐Capacity Battery Electrodes through Magnetic Alignment of Emulsion‐Based Slurries

High energy‐density, low‐cost batteries are critically important to a variety of applications ranging from portable electronics to electric vehicles (EVs) and grid‐scale storage. While tremendous research effort has been focused on new materials or chemistries with high energy‐density potential, design innovations such as low‐tortuosity thick electrodes are another promising path toward higher energy density and lower cost. Growing demand for fast‐charging batteries has also highlighted the need for negative electrodes that can accept high rate charging without metal deposition; low tortuosity can be a benefit in this regard. However, a general and scalable fabrication method for low‐tortuosity electrodes is currently lacking. Here an emulsion‐based, magnetic‐alignment approach to producing thick electrodes (>400 µm thickness) with ultrahigh areal capacity (up to ≈14 mAh cm^?2 vs 2–4 mAh cm^?2 for conventional lithium ion) is reported. The process is demonstrated for LiCoO₂ and meso‐carbon microbead graphite. The LiCoO₂ cathodes are confirmed to have low tortuosity via DC‐depolarization experiments and deliver high areal capacity (>10 mAh cm^?2) in galvanostatic discharge tests at practical C‐rates and model EV drive‐cycle tests. This simple fabrication method can potentially be applied to many other active materials to enable thick, low‐tortuosity electrodes.     

Artificial photosynthesis with metal and covalent organic frameworks (MOFs and COFs): challenges and prospects in fuel‐forming electrocatalysis

Mimicking photosynthesis in generating chemical fuels from sunlight is a promising strategy to alleviate society's demand for fossil fuels. However, this approach involves a number of challenges that must be overcome before this concept can emerge as a viable solution to society's energy demand. Particularly in artificial photosynthesis, the catalytic chemistry that converts energy in the form of electricity into carbon‐based fuels and chemicals has yet to be developed. Here, we describe the foundational work and future prospects of an emerging and promising class of materials: metal‐ and covalent‐organic frameworks (MOFs and COFs). Within this context, these porous and tuneable framework materials have achieved initial success in converting abundant feedstocks (H₂O and CO₂) into chemicals and fuels. In this review, we first highlight key achievements in this direction. We then follow with a perspective on precisely how MOFs and COFs can perform in ways not possible with conventional molecular or heterogeneous catalysts. We conclude with a view on how spectroscopically probing MOF and COF catalysis can be used to elucidate reaction mechanisms and material dynamics throughout the course of reaction.     

Highly Efficient Solar‐Driven Carbon Dioxide Reduction on Molybdenum Disulfide Catalyst Using Choline Chloride‐Based Electrolyte

Conversion of CO₂ to energy‐rich chemicals using renewable energy is of much interest to close the anthropogenic carbon cycle. However, the current photoelectrochemical systems are still far from being practically feasible. Here the successful demonstration of a continuous, energy efficient, and scalable solar‐driven CO₂ reduction process based on earth‐abundant molybdenum disulfide (MoS₂) catalyst, which works in synergy with an inexpensive hybrid electrolyte of choline chloride (a common food additive for livestock) and potassium hydroxide (KOH) is reported. The CO₂ saturated hybrid electrolyte utilized in this study also acts as a buffer solution (pH ≈ 7.6) to adjust pH during the reactions. This study reveals that this system can efficiently convert CO₂ to CO with solar‐to‐fuel and catalytic conversion efficiencies of 23% and 83%, respectively. Using density functional theory calculations, a new reaction mechanism in which the water molecules near the MoS₂ cathode act as proton donors to facilitate the CO₂ reduction process by MoS₂ catalyst is proposed. This demonstration of a continuous, cost‐effective, and energy efficient solar driven CO₂ conversion process is a key step toward the industrialization of this technology.     

Atomic‐Level Reactive Sites for Semiconductor‐Based Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is an effective means to generate renewable energy. It involves redox reactions, reduction of CO₂ and oxidation of water, that leads to the production of solar fuel. Significant research effort has therefore been made to develop inexpensive and practically sustainable semiconductor‐based photocatalysts. The exploration of atomic‐level active sites on the surface of semiconductors can result in an improved understanding of the mechanism of CO₂ photoreduction. This can be applied to the design and synthesis of efficient photocatalysts. In this review, atomic‐level reactive sites are classified into four types: vacancies, single atoms, surface functional groups, and frustrated Lewis pairs (FLPs). These different photocatalytic reactive sites are shown to have varied affinity to reactants, intermediates, and products. This changes pathways for CO₂ reduction and significantly impacts catalytic activity and selectivity. The design of a photocatalyst from an atomic‐level perspective can therefore be used to maximize atomic utilization efficiency and lead to a high selectivity. The prospects for fabrication of effective photocatalysts based on an in‐depth understanding are highlighted.