Supercapacitor Electrodes Obtained by Directly Bonding 2D MoS2 on Reduced Graphene Oxide

Layered molybdenum disulfide (MoS₂) is deposited by microwave heating on a reduced graphene oxide (RGO). Three concentrations of MoS₂ are loaded on RGO, and the structure and morphology are characterized. The first layers of MoS₂ are detected as being directly bonded with the oxygen of the RGO by covalent chemical bonds (Mo‐O‐C). Electrochemical characterizations indicate that this electroactive material can be cycled reversibly between 0.25 and 0.8 V in 1 m HClO₄ solution for hybrids with low concentrations of MoS₂ layers (LCMoS₂/RGO) and between 0.25 and 0.65 V for medium (MCMoS₂/RGO) and high concentrations (HCMoS₂/RGO) of MoS₂ layers on graphene. The specific capacitance measured values at 10 mV s^?1 are 128, 265, and 148 Fg^?1 for the MoS₂/RGO with low, medium, and high concentrations of MoS₂, respectively, and the calculated energy density is 63 W h kg^?1 for the LCMoS₂/RGO hybrid. This supercapacitor electrode also exhibits superior cyclic stability with 92% of the specific capacitance retained after 1000 cycles.     

High Performance Flexible Supercapacitor Electrodes Composed of Ultralarge Graphene Sheets and Vanadium Dioxide

Little is known regarding the effect of the graphene lateral size on the electrochemical performance of hybrid graphene electrode. This work examines the electrochemical performance of a flexible hybrid supercapacitor electrode composed of ultralarge graphene oxide (UGO; mean lateral size of 47 ± 22 μm) and vanadium dioxide (VO₂) nanobelts, referring to a reference electrode composed of small scale graphene oxide (SGO; mean lateral size of 0.8 ± 0.5 μm) and VO₂.Thermal treatment converts UGO/VO₂ and SGO/VO₂ to URGO/VO₂ (denoted VURGO) and SRGO/VO₂ (denoted VSRGO) electrodes, respectively. The sheet resistance of the VURGO film (0.57 ± 0.03 kΩ sq.^–1) was two orders of magnitude lower than that of the VSRGO (55.74 ± 9.35 kΩ sq.^–1). The VURGO hybrid electrode showed a specific capacitance of 769 F g^?1, which was significantly better than the corresponding values for the VSRGO electrode (385 F/g). These results support the notion that the use of ultralarge graphene sheets (≈22 500 μm²) lowers the intersheet resistance due to the presence of fewer intersheet tunneling barriers. This article highlights the potential utility of URGO (as a conductive support) in hybrid electrode containing VO₂ nanobelts for high performance flexible hybrid supercapacitor.     

Combining Nature‐Inspired,Graphene‐Wrapped Flexible Electrodes with Nanocomposite Polymer Electrolyte for Asymmetric Capacitive Energy Storage

Two kinds of free‐standing electrodes, reduced graphene oxide (rGO)‐wrapped Fe‐doped MnO₂ composite (G‐MFO) and rGO‐wrapped hierarchical porous carbon microspheres composite (G‐HPC) are fabricated using a frozen lake‐inspired, bubble‐assistance method. This configuration fully enables utilization of the synergistic effects from both components, endowing the materials to be excellent electrodes for flexible and lightweight electrochemical capacitors. Moreover, a nonaqueous HPC‐doped gel polymer electrolyte (GPE‐HPC) is employed to broad voltage window and improve heat resistance. A fabricated asymmetric supercapacitor based on G‐MFO cathode and G‐HPC anode with GPE‐HPC electrolyte achieves superior flexibility and reliability, enhanced energy/power density, and outstanding cycling stability. The ability to power light‐emitting diodes also indicates the feasibility for practical use. Therefore, it is believed that this novel design may hold great promise for future flexible electronic devices.     

Flexible,Scalable, and Highly Conductive Garnet‐Polymer Solid Electrolyte Templated by Bacterial Cellulose

Solid‐state electrolytes are a promising candidate for the next‐generation lithium‐ion battery, as they have the advantages of eliminating the leakage hazard of liquid solvent and elevating stability. However, inherent limitations such as the low ionic conductivity of solid polymer electrolytes and the high brittleness of inorganic ceramic electrolytes severally impede their practical application. Here, an inexpensive, facile, and scalable strategy to fabricate a hybrid Li₇La₃Zr₂O₁₂ (LLZO) and poly(ethylene oxide)‐based electrolyte by exploiting bacterial cellulose as a template is reported. The well‐organized LLZO network significantly enhances the ionic conductivity by extending long transport pathways for Li ions, exhibiting an elevated conductivity of 1.12 × 10^?4 S cm^?1. In addition, the hybrid electrolyte presents a structural flexibility, with minor impedance increase after bending. The facile and applicable approach establishes new principles for the strategy of designing scalable and flexible hybrid polymer electrolytes that can be utilized for high‐energy‐density batteries.     

Extremely Flexible Transparent Conducting Electrodes for Organic Devices

Extremely flexible transparent conducting electrodes are developed using a combination of metal‐embedding architecture into plastic substrate and ultrathin transparent electrodes, which leads to highly transparent (optical transmittance ≈93% at a wavelength of 550 nm), highly conducting (sheet resistance ≈13 Ω □^?1), and extremely flexible (bending radius ≈ 200 μm) electrodes. The electrodes are used to fabricate flexible organic solar cells and organic light‐emitting diodes that exhibit performance similar or superior to that of devices fabricated on glass substrates. Moreover, the flexible devices do not show degradation in their performance even after being folded with a radius of ≈200 μm.     

Facile and Scalable Preparation of Ruthenium Oxide‐Based Flexible Micro‐Supercapacitors

Tremendous efforts have been invested in the development of the internet of things during the past 10 years. Implantable sensors still need embedded miniaturized energy harvesting devices, since commercialized thin films and microbatteries do not provide sufficient power densities and suffer from limited lifetime. Therefore, micro‐supercapacitors are good candidates to store energy and deliver power pulses while providing non‐constant voltage output with time. However, multistep expensive protocols involving mask aligners and sophisticated cleanrooms are used to prepare these devices. Here, a simple and versatile laser‐writing procedure to integrate flexible micro‐supercapacitors and microbatteries on current‐collector‐free polyimide foils is reported, starting from commercial powders. Ruthenium oxide (RuO₂)‐based micro‐supercapacitors are prepared by laser irradiation of a bilayered tetrachloroauric acid (HAuCl₄ · 3H₂O)–cellulose acetate/RuO₂ film deposited by spin‐coating, which leads to adherent Au/RuO₂ electrodes with a unique pillar morphology. The as‐prepared microdevices deliver 27 mF cm^?2/540 F cm^?3 in 1 m H₂SO₄ and retain 80% of the initial capacitance after 10 000 cycles. This simple process is applied to make carbon‐based micro‐supercapacitors, as well as metal oxide based pseudocapacitors and battery electrodes, thus offering a straightforward solution to prepare low‐cost flexible microdevices at a large scale.     

Highly‐Safe and Ultra‐Stable All‐Flexible Gel Polymer Lithium Ion Batteries Aiming for Scalable Applications

With the development of flexible electronics, flexible lithium ion batteries (LIBs) have received great attention. Previously, almost all reported flexible components had shortcomings related to poor mechanical flexibility, low energy density, and poor safety, which led to the failure of scalable applications. This study demonstrates a fully flexible lithium ion battery using LiCoO₂ as the cathode, Li₄Ti₅O₁₂ as the anode, and graphene film as the flexible current collector. The graphene oxide modified gel polymer electrolyte exhibits higher ionic conductivity than a conventional liquid electrolyte and improves the safety of the flexible battery. The optimum design of the flexible graphene battery exhibits super electrochemical performance, with a 2.3 V output voltage plateau and a satisfactory capacity of 143.0 mAh g^?1 at 1 C. The mass energy density and power density are both ≈1.4 times higher than a standard electrode using metal foils as current collectors. No capacity loss is observed after 100 thousand cycles of mechanical bending. More importantly, even in the clipping state, this flexible gel polymer battery can still demonstrate a stable and safe electrochemical performance. This work may lead to a promising strategy of high‐performance scalable LIBs for the next‐generation flexible electronics.     

Scalable,Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors

Graphene micro‐supercapacitors (MSCs) are an attractive energy storage technology for powering miniaturized portable electronics. Despite considerable advances in recent years, device fabrication typically requires conventional microfabrication techniques, limiting the translation to cost‐effective and high‐throughput production. To address this issue, we report here a self‐aligned printing process utilizing capillary action of liquid inks in microfluidic channels to realize scalable, high‐fidelity manufacturing of graphene MSCs. Microstructured ink receivers and capillary channels are imprinted on plastic substrates and filled by inkjet printing of functional materials into the receivers. The liquid inks move under capillary flow into the adjoining channels, allowing reliable patterning of electronic materials in complex structures with greatly relaxed printing tolerance. Leveraging this process with pristine graphene and ion gel inks, miniaturized all‐solid‐state graphene MSCs are demonstrated to concurrently achieve outstanding resolution (active footprint: <1 mm², minimum feature size: 20 µm) and yield (44/44 devices), while maintaining a high specific capacitance (268 µF cm^–2) and robust stability to extended cycling and bending, establishing an effective route to scale down device size while scaling up production throughput.     

A Flexible Dual‐Ion Battery Based on PVDF‐HFP‐Modified Gel Polymer Electrolyte with Excellent Cycling Performance and Superior Rate Capability

Dual‐ion batteries (DIBs) have attracted increasing attention owing to their merits of high working voltage, low cost, and especially environmental friendliness. However, the cycling stability of most DIBs is still unsatisfying due to the decomposition of conventional liquid carbonate electrolytes under high working voltages. Exploration of gel polymer electrolytes (GPEs) with good electrochemical stability at high voltage is a possible strategy to optimize their cycling stability. A high‐performance flexible DIB based on a poly(vinylidene fluoride‐hexafluoro propylene) GPE codoped with poly(ethylene oxide) and graphene oxide via weak bond interactions is herein reported for the first time. The prepared polymer electrolyte shows a 3D porous network with significantly improved ionic conductivity up to 2.1 × 10^?3 S cm^?1, which is favorable for fast ionic transportation of both cations and anions. As a result, this DIB exhibits excellent cycling stability with a capacity retention of 92% after 2000 cycles at a high current rate of 5C (1C is corresponding to 100 mA g^?1), which is among the best performances of DIBs. Moreover, good flexibility and thermal stability (up to 90 °C) are also achieved for this battery, indicating its potential applications for high‐performance flexible energy storage devices.     

Iron‐Based Supercapacitor Electrodes: Advances and Challenges

Supercapacitors (SCs) have great promise as the state‐of‐the‐art power source in portable electronics and hybrid vehicles. The performance of SCs is largely determined by the properties of the electrode material, and numerous efforts have been devoted to the explorations of novel electrode materials. Recently, iron‐based materials, including Fe₂O₃, Fe₃O₄, FeOOH, FeO_x, CoFe₂O₄, and MnFe₂O₄, have received considerable attention as very promising electrode materials for SCs due to their high theoretical specific capacitances, natural abundance, low cost, and non‐toxicity. However, most of these Fe‐based SC electrodes suffer from poor conductivity and/or electrochemical instability, which seriously impede their implementation as high‐performance electrodes for SCs. To settle these issues, substantial efforts have been made in improving their conductivity and cycling stability, and great processes have been achieved. Here, recent research advances in the rational design and synthesis of diverse Fe‐based nanostructured electrodes and their capacitive performance for SCs are presented. Besides, challenges and prospects of Fe‐based materials as advanced negative electrodes for SCs are also discussed.     

A Particle‐Controlled,High‐Performance,Gum‐Like Electrolyte for Safe and Flexible Energy Storage Devices

Storing energy within flexible and safe materials is one of the most important goals for energy storage devices. To that end, high‐performance conformable electrolytes, which can transport ions quickly and safely, and can also effectively separate and bond strongly to the two electrodes, are of great importance. However, it is challenging to develop an electrolyte that can play these multiple roles simultaneously. Here, aiming to overcome this challenge, a particle‐based approach to the fabrication of a high‐performance, gum‐like electrolyte is described. The intriguing properties of the gum‐like electrolyte include high ionic conductivity, good mechanical properties, excellent adhesion properties, and, more importantly, thermal‐protection capability. It is shown that these significant properties are well‐controlled by the incorporation of wax particles with variable size, loading, and surface properties that can be designed through the use of an apporpriate surfactant. This provides a promising solution for high‐performance electrolytes and indicates a cost‐effective approach to fabricating multifunctional ion‐conducting materials.     

Flexible Asymmetric Micro‐Supercapacitors Based on Bi2O3 and MnO2 Nanoflowers: Larger Areal Mass Promises Higher Energy Density

A flexible asymmetric supercapacitor (ASC) with high energy density is designed and fabricated using flower‐like Bi₂O₃ and MnO₂ grown on carbon nanofiber (CNF) paper as the negative and positive electrodes, respectively. The lightweight (1.6 mg cm^?2), porous, conductive, and flexible features make the CNF paper an ideal support for guest active materials, which permit a large areal mass of 9 mg cm^?2 for Bi₂O₃ (≈85 wt% of the entire electrode). Thus, the optimal device with an operation voltage of 1.8 V can deliver a high energy density of 43.4 μWh cm^?2 (11.3 W h kg^?1, based on the total electrodes) and a maximum power density of 12.9 mW cm^?2 (3370 W kg^?1). This work provides an example of large areal mass and flexible electrode for ASCs with high areal capacitance and high energy density, holding great promise for future flexible electronic devices.     

Rational Design of Metal‐Organic Framework Derived Hollow NiCo2O4 Arrays for Flexible Supercapacitor and Electrocatalysis

Metal‐organic frameworks (MOFs) are promising porous precursors for the construction of various functional materials for high‐performance electrochemical energy storage and conversion. Herein, a facile two‐step solution method to rational design of a novel electrode of hollow NiCo₂O₄ nanowall arrays on flexible carbon cloth substrate is reported. Uniform 2D cobalt‐based wall‐like MOFs are first synthesized via a solution reaction, and then the 2D solid nanowall arrays are converted into hollow and porous NiCo₂O₄ nanostructures through an ion‐exchange and etching process with an additional annealing treatment. The as‐obtained NiCo₂O₄ nanostructure arrays can provide rich reaction sites and short ion diffusion path. When evaluated as a flexible electrode material for supercapacitor, the as‐fabricated NiCo₂O₄ nanowall electrode shows remarkable electrochemical performance with excellent rate capability and long cycle life. In addition, the hollow NiCo₂O₄ nanowall electrode exhibits promising electrocatalytic activity for oxygen evolution reaction. This work provides an example of rational design of hollow nanostructured metal oxide arrays with high electrochemical performance and mechanical flexibility, holding great potential for future flexible multifunctional electronic devices.     

Vanadium Oxide Nanowire–Carbon Nanotube Binder‐Free Flexible Electrodes for Supercapacitors

Vanadium pentoxide (V₂O₅) layered nanostructures are known to have very stable crystal structures and high faradaic activity. The low electronic conductivity of V₂O₅ greatly limits the application of vanadium oxide as electrode materials and requires combining with conducting materials using binders. It is well known that the organic binders can degrade the overall performance of electrode materials and need carefully controlled compositions. In this study, we develop a simple method for preparing freestanding carbon nanotube (CNT)‐V₂O₅ nanowire (VNW) composite paper electrodes without using binders. Coin cell type (CR2032) supercapacitors are assembled using the nanocomposite paper electrode as the anode and high surface area carbon fiber electrode (Spectracarb 2225) as the cathode. The supercapacitor with CNT‐VNW composite paper electrode exhibits a power density of 5.26 kW Kg^?1 and an energy density of 46.3 Wh Kg^?1. (Li)VNWs and CNT composite paper electrodes can be fabricated in similar manner and show improved overall performance with a power density of 8.32 kW Kg^?1 and an energy density of 65.9 Wh Kg^?1. The power and energy density values suggest that such flexible hybrid nanocomposite paper electrodes may be useful for high performance electrochemical supercapacitors.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

Sandwich‐Type Microporous Carbon Nanosheets for Enhanced Supercapacitor Performance

Sandwich‐type microporous hybrid carbon nanosheets (MHCN) consisting of graphene and microporous carbon layers are fabricated using graphene oxides as shape‐directing agent and the in‐situ formed poly(benzoxazine‐co‐resol) as carbon precursor. The reaction and condensation can be readily completed within 45 min. The obtained MHCN has a high density of accessible micropores that reside in the porous carbon with controlled thickness (e.g., 17 nm), a high surface area of 1293 m² g^?1 and a narrow pore size distribution of ca. 0.8 nm. These features allow an easy access, a rapid diffusion and a high loading of charged ions, which outperform the diffusion rate in bulk carbon and are highly efficient for an increased double‐layer capacitance. Meanwhile, the uniform graphene percolating in the interconnected MHCN forms the bulk conductive networks and their electrical conductivity can be up to 120 S m^?1 at the graphene percolation threshold of 2.0 wt.%. The best‐practice two‐electrode test demonstrates that the MHCN show a gravimetric capacitance of high up to 103 F g^?1 and a good energy density of ca. 22.4 Wh kg^?1 at a high current density of 5 A g^?1. These advanced properties ensure the MHCN a great promise as an electrode material for supercapacitors.     

Inverted Design for High‐Performance Supercapacitor Via Co(OH)2‐Derived Highly Oriented MOF Electrodes

Metal organic frameworks (MOFs) are considered as promising candidates for supercapacitors because of high specific area and potential redox sites. However, their shuffled orientations and low conductivity nature lead to severely‐degraded performance. Designing an accessibly‐manipulated and efficient method to address those issues is of outmost significance for MOF application in supercapacitors. It is the common way that MOFs scarify themselves as templates or precursors to prepare target products. But to reversely think it, using target products to prepare MOF could be the way to unlock the bottleneck of MOFs' performance in supercapacitors. Herein, a novel strategy using Co(OH)₂ as both the template and precursor to fabricate vertically‐oriented MOF electrode is proposed. The electrode shows a double high specific capacitance of 1044 Fg^?1 and excellent rate capability compared to MOF in powder form. An asymmetric supercapacitor was also fabricated, which delivers a maximum energy density of 28.5 W h kg^?1 at a power density of 1500 W kg^?1, and the maximum of 24000 W kg^?1 can be obtained with a remaining energy density of 13.3 W h kg^?1. Therefore, the proposed strategy paves the way to unlock the inherent advantages of MOFs and also inspires for advanced MOF synthesis with optimum performance.     

Wearable High‐Performance Supercapacitors Based on Silver‐Sputtered Textiles with FeCo2S4–NiCo2S4 Composite Nanotube‐Built Multitripod Architectures as Advanced Flexible Electrodes

To achieve high‐performance wearable supercapacitors (SCs), a new class of flexible electrodes with favorable architectures allowing large porosity, high conductivity, and good mechanical stability is strongly needed. Here, this study reports the rational design and fabrication of a novel flexible electrode with nanotube‐built multitripod architectures of ternary metal sulfides' composites (FeCo₂S₄–NiCo₂S₄) on a silver‐sputtered textile cloth. Silver sputtering is applicable to almost all kinds of textiles, and S^2? concentration is optimized during sulfidation process to achieve such architectures and also a complete sulfidation assuring high conductivity. New insights into concentration‐dependent sulfidation mechanism are proposed. The additive‐free FeCo₂S₄–NiCo₂S₄ electrode shows a high specific capacitance of 1519 F g^?1 at 5 mA cm^?2 and superior rate capability (85.1% capacitance retention at 40 mA cm^?2). All‐solid‐state SCs employing these advanced electrodes deliver high energy density of 46 W h kg^?1 at 1070 W kg^?1 as well as achieve remarkable cycling stability retaining 92% of initial capacitance after 3000 cycles at 10 mA cm^?2, and outstanding reliability with no capacitance degradation under large twisting. These are attributed to the components' synergy assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. An almost linear increase in capacitance with devices' area indicates possibility to meet various energy output requirements. This work provides a general, low‐cost route to wearable power sources.