Formation of Yolk‐Shelled Ni–Co Mixed Oxide Nanoprisms with Enhanced Electrochemical Performance for Hybrid Supercapacitors and Lithium Ion Batteries

Yolk‐shelled particles with tailored physical and chemical properties are attractive for electrochemical energy storage. Starting with metal acetate hydroxide with tetragonal prism‐like shapes, yolk‐shelled Ni–Co mixed oxide nanoprisms with tunable composition have been prepared by simple thermal annealing in air. It is found that the yolk‐shelled structure is formed due to the fast thermally driven contraction process. With the favorable porous structure and composition, these yolk‐shelled Ni–Co oxide particles manifest greatly enhanced electrochemical properties when evaluated as electrodes for both hybrid supercapacitors and lithium ion batteries. In particular, the resultant Ni_0.37Co oxide sample delivers very high specific capacitance of over 1000 F g^?1 at a current density of 10 A g^?1 with remarkably high capacitance retention of 98% after 15 000 cycles.     

Distinctive Supercapacitive Properties of Copper and Copper Oxide Nanocrystals Sharing a Similar Colloidal Synthetic Route

CuO and Cu₂O are non‐noble transition metal oxide supercapacitive materials with high theoretical specific capacitances above 1800 F g^?1. In this work, by adjusting organic additives of a colloidal system, Cu, Cu₂O, and CuO are grown in situ on nickel foam. CuO exhibits a specific capacitance of 1355 F g^?1 at 2 A g^?1 in 3 m KOH, a value well above those of Cu and Cu₂O (<500 F g^?1), and is superior to other known CuO electrodes. The CuO electrode exhibits 70% of its initial capacity, and the Columbic efficiency remains ≈100% after 7000 cycles at 4 A g^?1. Cu₂O exhibits the worst electrochemical performance, mainly due to the inactive barrier layer forming on the surface. This work provides an efficient synthetic platform for both comparable supercapacitive studies and cost‐effective electrochemical energy storage applications.     

Sulfidation of NiMn‐Layered Double Hydroxides/Graphene Oxide Composites toward Supercapacitor Electrodes with Enhanced Performance

Supercapacitors can deliver high‐power density and long cycle stability, but the limited energy density due to poor electronic and ionic conductivity of the supercapacitor electrode has been a bottleneck in many applications. A strategy to prepare microflower‐like NiMn‐layered double hydroxides (LDH) with sulfidation is delineated to reduce the charge transfer resistance of supercapacitor electrode and realize faster reversible redox reactions with notably enhanced specific capacitance. The incorporation of graphite oxide (GO) in NiMn LDH during sulfidation leads to simultaneous reduction of GO with enhanced conductivity, lessened defects, and doping of S into the graphitic structure. Cycling stability of the sulfidized composite electrode is enhanced due to the alleviation of phase transformation during electrochemical cycling test. As a result, this sulfidation product of LDH/GO (or LDHGOS) can reach a high‐specific capacitance of 2246.63 F g^?1 at a current density of 1 A g^?1, and a capacitance of 1670.83 F g^?1 is retained at a high‐current density of 10 A g^?1, exhibiting an outstanding capacitance and rate performance. The cycling retention of the LDHGOS electrode is also extended to ≈ 67% after 1500 cycles compared to only ≈44% of the pristine NiMn LDH.     

Graphitic Petal Electrodes for All‐Solid‐State Flexible Supercapacitors

The charge storage characteristics of a composite nanoarchitecture with a highly functional 3D morphology are reported. The electrodes are formed by the electropolymerization of aniline monomers into a nanometer‐thick polyaniline (PANI) film that conformally coats graphitic petals (GPs) grown by microwave plasma chemical vapor deposition (MPCVD) on conductive carbon cloth (CC). The hybrid CC/GPs/PANI electrodes yield results near the theoretical maximum capacitance for PANI of 2000 F g^?1 (based on PANI mass) and a large area‐normalized specific capacitance of ≈2.6 F cm^?2 (equivalent to a volumetric capacitance of ≈230 F cm^?3) at a low current density of 1 A g^?1 (based on PANI mass). The specific capacitances remain above 1200 F g^?1 (based on PANI mass) for currents up to 100 A g^?1 with correspondingly high area‐normalized values. The hybrid electrodes also exhibit a high rate capability with an energy density of 110 Wh kg^?1 and a maximum power density of 265 kW kg^?1 at a current density of 100 A g^?1. Long‐term cyclic stability is good (≈7% loss of initial capacitance after 2000 cycles), with coulombic efficiencies >99%. Moreover, prototype all‐solid‐state flexible supercapacitors fabricated from these hybrid electrodes exhibit excellent energy storage performance.     

Hierarchical Fabric Decorated with Carbon Nanowire/Metal Oxide Nanocomposites for 1.6 V Wearable Aqueous Supercapacitors

Aqueous asymmetric supercapacitors (ASCs) may offer comparable or higher energy density than electric double‐layer capacitors (EDLCs) based on organic electrolytes. As such, ASCs may be more suitable for integration into smart textiles, where the use of flammable organic solvents is not acceptable. However, reported ASC devices typically suffer from poor rate capability and low areal loadings. This study demonstrates the development of nitrogen‐doped carbon (N‐C) nanowire/metal oxide (Fe₂O₃ and MnO₂) nanocomposite electrodes directly produced on the internal surface of a conductive fabric for use as high‐rate electrodes for solid‐state ASCs. The N‐C nanowires provide fast and efficient pathways for electrons, while short diffusion paths within nanosized metal oxides enable fast ion transport, leading to greatly enhanced performance at high rates. The porous structure of the fabric enables high areal capacitance loading in each electrode (≈150 mF cm^?2). Both electrodes show high specific capacitance of ≈180 F g^?1 (Fe₂O₃) and ≈250 F g^?1 (MnO₂) and excellent rate capability. Solid‐state ASCs assembled by using an aqueous gel electrolyte operate at 1.6 V and deliver over 60 mF cm^?2 during ≈50 s charging/discharging time and over 30 mF cm^?2 for ≈5 s discharge.     

Highly Defective Layered Double Perovskite Oxide for Efficient Energy Storage via Reversible Pseudocapacitive Oxygen‐Anion Intercalation

The use of perovskite materials as anion‐based intercalation pseudocapacitor electrodes has received significant attention in recent years. Notably, these materials, characterized by high oxygen vacancy concentrations, do not require high surface areas to achieve a high energy storage capacity as a result of the bulk intercalation mechanism. This study reports that reduced PrBaMn₂O_6–δ (r‐PBM), possessing a layered double perovskite structure, exhibits ultrahigh capacitance and functions as an excellent oxygen anion‐intercalation‐type electrode material for supercapacitors. Formation of the layered double perovskite structure, as facilitated by hydrogen treatment, is shown to significantly enhance the capacitance, with the resulting r‐PBM material demonstrating a very high gravimetric capacitance of 1034.8 F g^?1 and an excellent volumetric capacitance of ≈2535.3 F cm^?3 at a current density of 1 A g^?1. The resultant formation of a double perovskite crystal oxide with a specific layered structure leads to the r‐PBM with a substantially higher oxygen diffusion rate and oxygen vacancy concentration. These superior characteristics show immense promise for their application as oxygen anion‐intercalation‐type electrodes in pseudocapacitors.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Mn‐Rich P′2‐Na0.67[Ni0.1Fe0.1Mn0.8]O2 as High‐Energy‐Density and Long‐Life Cathode Material for Sodium‐Ion Batteries

Herein, P′2‐type Na_0.67[Ni_0.1Fe_0.1Mn_0.8]O₂ is introduced as a promising new cathode material for sodium‐ion batteries (SIBs) that exhibits remarkable structural stability during repetitive Na⁺ de/intercalation. The O? Ni? O? Mn? O? Fe? O bond in the octahedra of transition‐metal layers is used to suppress the elongation of the Mn? O bond and to improve the electrochemical activity, leading to the highly reversible Na storage mechanism. A high discharge capacity of ≈220 mAh g^?1 (≈605 Wh kg^?1) is delivered at 0.05 C (13 mAg^?1) with a high reversible capacity of ≈140 mAh g^?1 at 3 C and excellent capacity retention of 80% over 200 cycles. This performance is associated with the reversible P′2–OP4 phase transition and small volume change upon charge and discharge (≈3%). The nature of the sodium storage mechanism in a full cell paired with a hard carbon anode reveals an unexpectedly high energy density of ≈542 Wh kg^?1 at 0.2 C and good capacity retention of ≈81% for 500 cycles at 1 C (260 mAg^?1).     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.     

Ultrathin and Porous Ni3S2/CoNi2S4 3D‐Network Structure for Superhigh Energy Density Asymmetric Supercapacitors

3D‐networked, ultrathin, and porous Ni₃S₂/CoNi₂S₄ on Ni foam (NF) is successfully designed and synthesized by a simple sulfidation process from 3D Ni–Co precursors. Interestingly, the edge site‐enriched Ni₃S₂/CoNi₂S₄/NF 3D‐network is realized by the etching‐like effect of S^2? ions, which made the surfaces of Ni₃S₂/CoNi₂S₄/NF with a ridge‐like feature. The intriguing structural/compositional/componental advantages endow 3D‐networked‐free‐standing Ni₃S₂/CoNi₂S₄/NF electrodes better electrochemical performance with specific capacitance of 2435 F g^?1 at a current density of 2 A g^?1 and an excellent rate capability of 80% at 20 A g^?1. The corresponding asymmetric supercapacitor achieves a high energy density of 40.0 W h kg^?1 at an superhigh power density of 17.3 kW kg^?1, excellent specific capacitance (175 F g^?1 at 1A g^?1), and electrochemical cycling stability (92.8% retention after 6000 cycles) with Ni₃S₂/CoNi₂S₄/NF as the positive electrode and activated carbon/NF as the negative electrode. Moreover, the temperature dependences of cyclic voltammetry curve polarization and specific capacitances are carefully investigated, and become more obvious and higher, respectively, with the increase of test temperature. These can be attributed to the components' synergetic effect assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. This work provides a general, low‐cost route to produce high performance electrode materials for portable supercapacitor applications on a large scale.     

A New P2‐Type Layered Oxide Cathode with Extremely High Energy Density for Sodium‐Ion Batteries

Herein, a new P2‐type layered oxide is proposed as an outstanding intercalation cathode material for high energy density sodium‐ion batteries (SIBs). On the basis of the stoichiometry of sodium and transition metals, the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode is synthesized without impurities phase by partially substituting Ni and Fe into the Mn sites. The partial substitution results in a smoothing of the electrochemical charge/discharge profiles and thus greatly improves the battery performance. The P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode delivers an extremely high discharge capacity of 221.5 mAh g^?1 with a high average potential of ≈2.9 V (vs Na/Na⁺) for SIBs. In addition, the fast Na‐ion transport in the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode structure enables good power capability with an extremely high current density of 2400 mA g^?1 (full charge/discharge in 12 min) and long‐term cycling stability with ≈80% capacity retention after 500 cycles at 600 mA g^?1. A combination of electrochemical profiles, in operando synchrotron X‐ray diffraction analysis, and first‐principles calculations are used to understand the overall Na storage mechanism of P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂.     

High Performance,Flexible, Solid‐State Supercapacitors Based on a Renewable and Biodegradable Mesoporous Cellulose Membrane

A flexible, transparent, and renewable mesoporous cellulose membrane (mCel‐membrane) featuring uniform mesopores of ≈24.7 nm and high porosity of 71.78% is prepared via a facile and scalable solution‐phase inversion process. KOH‐saturated mCel‐membrane as a polymer electrolyte demonstrates a high electrolyte retention of 451.2 wt%, a high ionic conductivity of 0.325 S cm^?1, and excellent mechanical flexibility and robustness. A solid‐state electric double layer capacitor (EDLC) using activated carbon as electrodes, the KOH‐saturated mCel‐membrane as a polymer electrolyte exhibits a high capacitance of 110 F g^?1 at 1.0 A g^?1, and long cycling life of 10 000 cycles with 84.7% capacitance retention. Moreover, a highly integrated planar‐type micro‐supercapacitor (MSC) can be facilely fabricated by directly depositing the electrode materials on the mCel‐membrane‐based polymer electrolyte without using complicated devices. The resulting MSC exhibits a high areal capacitance of 153.34 mF cm^?2 and volumetric capacitance of 191.66 F cm^?3 at 10 mV s^?1, representing one of the highest values among all carbon‐based MSC devices. These findings suggest that the developed renewable, flexible, mesoporous cellulose membrane holds great promise in the practical applications of flexible, solid‐state, portable energy storage devices that are not limited to supercapacitors.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

A High‐Energy Density Asymmetric Supercapacitor Based on Fe2O3 Nanoneedle Arrays and NiCo2O4/Ni(OH)2 Hybrid Nanosheet Arrays Grown on SiC Nanowire Networks as Free‐Standing Advanced Electrodes

In this paper, a novel freestanding core‐branch negative and positive electrode material through integrating trim aligned Fe₂O₃ nanoneedle arrays (Fe₂O₃ NNAs) is first proposed with typical mesoporous structures and NiCo₂O₄/Ni(OH)₂ hybrid nanosheet arrays (NiCo₂O₄/Ni(OH)₂ HNAs) on SiC nanowire (SiC NW) skeletons with outstanding resistance to oxidation and corrosion, good conductivity, and large‐specific surface area. The original built SiC NWs@Fe₂O₃ NNAs is validated to be a highly capacitive negative electrode (721 F g^?1 at 2 A g^?1, i.e., 1 F cm^?2 at 2.8 mA cm^?2), matching well with the similarly constructed SiC NWs@NiCo₂O₄/Ni(OH)₂ HNAs positive electrode (2580 F g^?1 at 4 A g^?1, i.e., 3.12 F cm^?2 at 4.8 mA cm^?2). Contributed by the uniquely engineered electrodes, a high‐performance asymmetric supercapacitor (ASC) is developed, which can exhibit a maximum energy density of 103 W h kg^?1 at a power density of 3.5 kW kg^?1, even when charging the device within 6.5 s, the energy density can still maintain as high as 45 W h kg^?1 at 26.1 kW kg^?1, and the ASC manifests long cycling lifespan with 86.6% capacitance retention even after 5000 cycles. This pioneering work not only offers an attractive strategy for rational construction of high‐performance SiC NW‐based nanostructured electrodes materials, but also provides a fresh route for manufacturing next‐generation high‐energy storage and conversion systems.     

One‐Step Fabrication of Ultrathin Porous Nickel Hydroxide‐Manganese Dioxide Hybrid Nanosheets for Supercapacitor Electrodes with Excellent Capacitive Performance

A facile one‐step hydrothermal co‐deposition method for growth of ultrathin Ni(OH)₂‐MnO₂ hybrid nanosheet arrays on three dimensional (3D) macroporous nickel foam is presented. Due to the highly hydrophilic and ultrathin nature of hybrid nanosheets, as well as the synergetic effects of Ni(OH)₂ and MnO₂, the as‐fabricated Ni(OH)₂‐MnO₂ hybrid electrode exhibits an ultrahigh specific capacitance of 2628 F g^?1. Moreover, the asymmetric supercapacitor with the as‐obtained Ni(OH)₂‐MnO₂ hybrid film as the positive electrode and the reduced graphene oxide as the negative electrode has a high energy density (186 Wh kg^?1 at 778 W kg^?1), based on the total mass of active materials.     

CoNi2S4‐Graphene‐2D‐MoSe2 as an Advanced Electrode Material for Supercapacitors

3D CoNi₂S₄‐graphene‐2D‐MoSe₂ (CoNi₂S₄‐G‐MoSe₂) nanocomposite is designed and prepared using a facile ultrasonication and hydrothermal method for supercapacitor (SC) applications. Because of the novel nanocomposite structures and resultant maximized synergistic effect among ultrathin MoSe₂ nanosheets, highly conductive graphene and CoNi₂S₄ nanoparticles, the electrode exhibits rapid electron and ion transport rate and large electroactive surface area, resulting in its amazing electrochemical properties. The CoNi₂S₄‐G‐MoSe₂ electrode demonstrates a maximum specific capacitance of 1141 F g^?1, with capacitance retention of ≈108% after 2000 cycles at a high charge–discharge current density of 20 A g^?1. As to its symmetric device, 109 F g^?1 at a scan rate of 5 mV s^?1 is exhibited. This pioneering work should be helpful in enhancing the capacitive performance of SC materials by designing nanostructures with efficient synergetic effects.     

High‐Performance Fiber‐Shaped All‐Solid‐State Asymmetric Supercapacitors Based on Ultrathin MnO2 Nanosheet/Carbon Fiber Cathodes for Wearable Electronics

Flexible fiber‐shaped supercapacitors have shown great potential in portable and wearable electronics. However, small specific capacitance and low operating voltage limit the practical application of fiber‐shaped supercapacitors in high energy density devices. Herein, direct growth of ultrathin MnO₂ nanosheet arrays on conductive carbon fibers with robust adhesion is exhibited, which exhibit a high specific capacitance of 634.5 F g^?1 at a current density of 2.5 A g^?1 and possess superior cycle stability. When MnO₂ nanosheet arrays on carbon fibers and graphene on carbon fibers are used as a positive electrode and a negative electrode, respectively, in an all‐solid‐state asymmetric supercapacitor (ASC), the ASC displays a high specific capacitance of 87.1 F g^?1 and an exceptional energy density of 27.2 Wh kg^?1. In addition, its capacitance retention reaches 95.2% over 3000 cycles, representing the excellent cyclic ability. The flexibility and mechanical stability of these ASCs are highlighted by the negligible degradation of their electrochemical performance even under severely bending states. Impressively, as‐prepared fiber‐shaped ASCs could successfully power a photodetector based on CdS nanowires without applying any external bias voltage. The excellent performance of all‐solid‐state ASCs opens up new opportunity for development of wearable and self‐powered nanodevices in near future.     

Uniform Pomegranate‐Like Nanoclusters Organized by Ultrafine Transition Metal Oxide@Nitrogen‐Doped Carbon Subunits with Enhanced Lithium Storage Properties

Uniform pomegranate‐like nanoclusters (NCs) organized by ultrafine transition metal oxide@nitrogen‐doped carbon (TMO@N–C) subunits (diameter ≈ 4 nm) are prepared on a large scale for the first time through a facile, novel, and one‐pot approach. Taking pomegranate‐like Fe₃O₄@N–C NCs as an example, this unique structure provides short Li⁺/electron diffusion pathways for electrochemical reactions, structural stability during cycling, and high electrical conductivity, leading to superior electrochemical performance. The resulting pomegranate‐like Fe₃O₄@N–C NCs possess a high specific capacity (1204.3 mA h g^?1 at 0.5 A g^?1 over 100 cycles), a stable cycle life (1063.0 mA h g^?1 at 1 A g^?1, 98.4% retention after 1000 cycles), and excellent rate capacities (606.0 mA h g^?1 at 10 A g^?1, 92.0% retention; 417.1 mA h g^?1 at 20 A g^?1, 91.7% retention after 1000 cycles).     

Superior Multifunctional Activity of Nanoporous Carbons with Widely Tunable Porosity: Enhanced Storage Capacities for Carbon‐Dioxide,Hydrogen, Water,and Electric Charge

Nanoporous carbons (NPCs) with engineered specific pore sizes and sufficiently high porosities (both specific surface area and pore volume) are necessary for storing energy in the form of electric charges and molecules. Herein, NPCs, derived from biomass pine‐cones, coffee‐grounds, graphene‐oxide and metal‐organic frameworks, with systematically increased pore width (<1.0 nm to a few nm), micropore volume (0.2–0.9 cm³ g^?1) and specific surface area (800–2800 m² g^?1) are presented. Superior CO₂, H_2, and H₂O uptakes of 35.0 wt% (≈7.9 mmol g^?1 at 273 K), 3.0 wt% (at 77 K) and 85.0 wt% (at 298 K), respectively at 1 bar, are achieved. At controlled microporosity, supercapacitors deliver impressive performance with a capacity of 320 and 230 F g^?1 at 500 mA g^?1, in aqueous and organic electrolytes, respectively. Excellent areal capacitance and energy density (>50 Wh kg^?1 at high power density, 1000 W kg^?1) are achieved to form the highest reported values among the range of carbons in the literature. The noteworthy energy storage performance of the NPCs for all five cases (CO₂, H₂, H₂O, and capacitance in aqueous and organic electrolytes) is highlighted by direct comparison to numerous existing porous solids. A further analysis on the specific pore type governed physisorption capacities is presented.     

Manganese Oxide/Carbon Aerogel Composite: an Outstanding Supercapacitor Electrode Material

Manganese oxide/carbon aerogel composite electrodes are prepared by a self‐limiting anodic‐electrochemical deposition of manganese oxide into a binder‐enriched carbon aerogel layer, drop‐cast on a graphite substrate, using 0.1 M Mn(CH₃COO)₂·4H₂O as the electrolyte. Manganese oxide grows in the form of thin nanofibers along the backbone of the carbon aerogel, leaving adequate working space for the electrolyte and enabling a fuller extent of the utilization of the manganese oxide to make the composite an outstanding supercapacitor electrode material. The manganese oxide is determined to be Mn₃O₄ with the Raman spectroscopy and high‐resolution transmission electron microscopy. The rectangularity of the cyclic‐voltammogram loops of the composite electrode is excellent and remains that way for scan rates up to a very‐high value of 500 mV s^?1, indicating extremely good redox reversibility and cycle efficiency. At a scan rate of 25 mV s^?1, the specific capacitance, as measured in 0.5 M Na₂SO₄ for a potential window of 0.1–0.9 V vs. Ag/AgCl, reaches a maximum value of 503 F g^?1 and experiences only a negligible decay of less than 1% at the 6000th cycle, implying an extraordinary cycling stability. The cycling efficiency is as high as 98% at a current density of 8 A g^?1 cm^?2, showing an almost‐ideal capacitive behavior. The power density reaches 48.5 kW kg^?1 and the energy density 21.6 W h kg^?1 at a scan rate of 500 mV s^?1, well above the specifications of current state‐of‐the‐art supercapacitors.