Structural basis for calmodulin as a dynamic calcium sensor

Calmodulin is a prototypical and versatile Ca(2+) sensor with EF hands as its high-affinity Ca(2+) binding domains. Calmodulin is present in all eukaryotic cells, mediating Ca(2+)-dependent signaling. Upon binding Ca(2+), calmodulin changes its conformation to form complexes with a diverse array of target proteins. Despite a wealth of knowledge on calmodulin, little is known on how target proteins regulate calmodulin's ability to bind Ca(2+). Here, we take advantage of two splice variants of SK2 channels, which are activated by Ca(2+)-bound calmodulin but show different sensitivity to Ca(2+) for their activation. Protein crystal structures and other experiments show that, depending on which SK2 splice variant it binds to, calmodulin adopts drastically different conformations with different affinities for Ca(2+) at its C-lobe. Such target protein-induced conformational changes make calmodulin a dynamic Ca(2+) sensor capable of responding to different Ca(2+) concentrations in cellular Ca(2+) signaling.     

Inter-domain interaction and the structural flexibility of calmodulin in the connecting region of the terminal two domains

The calcium-dependent difference absorption spectrum of scallop calmodulin was measured in the presence of mastoparan. The difference spectrum at 286 nm (delta A286) showed biphasic response to Ca2+ concentration. The first change represents the conformational change around Tyr-138 and the second change may respond to an interaction between N- and C-domain of calmodulin which became apparent in the associated state with mastoparan. Calmodulin-mastoparan complex was eluted from a gel filtration column after free calmodulin in the presence of Ca2+, which indicates a more compact structure of calmodulin-mastoparan complex than of free calmodulin. The biphasic response of delta A286 was also observed with free calmodulin when the ionic strength was as low as 0.02 M NaCl. In the absence of NaCl, the Ca2+ dependence of delta A288 was monophasic, assuming identical affinity of Ca2+ to both domains. Increase in the sensitivity of calmodulin to trypsin was observed with decrease in ionic strength. These results suggest an ionic-strength-dependent decrease in ordered structure of the connecting region. Calmodulin may change shape depending upon the ionic strength by bending at the connecting region. We assumed from the observations that calmodulin in solution may fluctuate between the two extreme shapes of the bent and the dumbbell structure. Target proteins may select and fix the specific bent structure for their activation.     

Interactions of calmodulin with metal ions and with its target proteins revealed by conformation-sensitive monoclonal antibodies

Two monoclonal antibodies (mAbs) raised against bovine calmodulin (CaM), CAM1 and CAM4, enable one to monitor conformational changes that occur in the molecule. The interaction of CAM1 with CaM depends on the Ca2+ occupancy of its Ca(2+)-binding sites. CAM4, in contrast, interacts with CaM in a Ca(2+)-independent manner, interacting with both holoCaM and EGTA-treated CaM to a similar extent. Their interaction with various CaMs, CaM tryptic fragments and chemically modified CaM, as well as molecular graphics, led to identification of the CAM1 and CAM4 epitopes on the C- and N-terminal lobes of CAM respectively. The two mAbs were used as macromolecular probes to detect conformational changes occurring in the CaM molecule upon binding of metal ions and target proteins and peptides. MAb CAM1 successfully detected changes associated with Al3+ binding even in the presence of Ca2+, indicating that Al3+ and Ca2+ ions may bind to the protein simultaneously, leading to a new conformation of the molecule. MAbs CAM1 and CAM4 were used to follow the interactions of CaM with its target peptides and proteins. Complexes with melittin, mastoparan, calcineurin and phosphodiesterase showed different immunological properties on an immuno-enzyme electrode, indicating unique structural properties for each complex.     

4Ca2+.troponin C forms dimers in solution at neutral pH that dissociate upon binding various peptides: small-angle X-ray scattering studies of peptide-induced structural changes.

Small-angle X-ray scattering data have been measured for rabbit skeletal muscle troponin C and its complexes with the venom peptides melittin and mastoparan as well as synthetic peptides based on regions of the troponin I sequence implicated in troponin C binding. At the neutral pH used in this study (pH 6.8), troponin C shows a tendency to form dimers in the presence of 4 mol equiv of Ca2+, but is monomeric in solution when 2 or less mol equiv of Ca2+ is present. The 4Ca2+.troponin C dimers dissociate upon binding melittin, mastoparan, and peptides based on residues 96-115, 1-30, and 1-40 in the troponin I sequence. This result suggests that the peptide-binding sites overlap with the regions of contact between troponin C molecules forming a dimer. Like the structurally homologous calcium-binding protein calmodulin, troponin C shows conformational flexibility upon binding different peptides. Upon binding melittin, troponin C contracts in a similar manner to calmodulin when it binds peptides known to form amphiphilic helices (e.g., melittin, mastoparan, or MLCK-I). In contrast, mastoparan binding to troponin C does not result in a contracted structure. The scattering data indicate troponin C also remains in an extended structure upon binding the inhibitory peptides having the same sequence as residues 96-115 in troponin I.     

Ca2+ binding sites in calmodulin and troponin C alter interhelical angle movements

Molecular dynamics analyses were performed to examine conformational changes in the C-domain of calmodulin and the N-domain of troponin C induced by binding of Ca(2+) ions. Analyses of conformational changes in calmodulin and troponin C indicated that the shortening of the distance between Ca(2+) ions and Ca(2+) binding sites of helices caused widening of the distance between Ca(2+) binding sites of helices on opposite sides, while the hydrophobic side chains in the center of helices hardly moved due to their steric hindrance. This conformational change acts as the clothespin mechanism.     

Binding of both Ca2+ and mastoparan to calmodulin induces a large change in the tertiary structure

The technique of small-angle X-ray scattering has been employed to examine the solution conformation of calmodulin and its complexes with Ca2+ alone, and with both Ca2+ and mastoparan. The radius of gyration decreased by 3.1 +/- 0.3 A upon binding of both 4 mol Ca2+/mol of protein and 1 mol mastoparan/mol of protein to form the ternary complex. A smaller increase was found for the separate binding of 4 mol Ca2+/mol of protein in the absence of mastoparan (0.6 +/- 0.3 A). The analyses of pair distance distribution function showed that the maximal pair distance in calmodulin complex with both Ca2+ and mastoparan decreased by 20-30% in comparison with calmodulin or its complex with Ca2+, and a shoulder near 40 A, which characterizes the dumbbell-shaped molecule of calmodulin, disappeared. These results indicate that the two globular domains of the calmodulin complex with Ca2+ and mastoparan come close together by 8.0-9.5 A on average, if the size and the overall shape of the globular domains are the same in Ca2+-calmodulin-mastoparan complex as in calmodulin or Ca2+-calmodulin complex.     

Long-range effects on calcium binding and conformational change in the N-domain of calmodulin

Proteins within the EF-hand protein family exhibit different conformational responses to Ca(2+) binding. Calmodulin and other members of the EF-hand protein family undergo major changes in conformation upon binding Ca(2+). However, some EF-hand proteins, such as calbindin D9k (Clb), bind Ca(2+) without a significant change in conformation. Here, we investigate the effects of replacement of a leucine at position 39 of the N-terminal domain of calmodulin (N-Cam) with a phenylalanine derived from Clb. This variant is studied alone and in the context of other mutations that affect the conformational properties of N-Cam. Strikingly, the introduction of Phe39, which is distant from the calcium binding sites, leads to a significant enhancement of Ca(2+) binding affinity, even in the context of other mutations which trap the protein in the closed form. The results yield novel insights into the evolution of EF-hand proteins as calcium sensors versus calcium buffers.     

Communication between two globular domains of calmodulin in the presence of mastoparan or caldesmon fragment. Ca2+ binding and 1H NMR

Ca2+ binding to calmodulin was measured in the presence of mastoparan or caldesmon fragment. Mastoparan and caldesmon fragment were used as model compounds of enzymes and cytoskeleton proteins, respectively, working as the target of calmodulin. Although the Ca2+ bindings of the two globular domains of calmodulin occur independently in the absence of the target peptide (or proteins), mastoparan and caldesmon fragment increased the affinity of Ca2+ and, at the same time, produced the positive cooperative Ca2+ bindings between the two domains. The result of Ca2+ binding was compared with 1H NMR spectra of calmodulin in the presence of equimolar concentration of mastoparan. It is known that a conformation change of the C-terminal half-region (C-domain) occurs by the Ca2+ binding to C-domain. A further change in conformation of C-domain was demonstrated by the Ca2+ binding to the N-terminal half-region (N-domain) in the presence of mastoparan. It indicates that the two domains of calmodulin get into communication with each other in the associated state with the target, and we concluded that the Ca2+ binding to the N-domain is responsive to the development of calmodulin function.     

Solvation energetics and conformational change in EF-hand proteins

Calmodulin and other members of the EF-hand protein family are known to undergo major changes in conformation upon binding Ca(2+). However, some EF-hand proteins, such as calbindin D9k, bind Ca(2+) without a significant change in conformation. Here, we show the importance of a precise balance of solvation energetics to conformational change, using mutational analysis of partially buried polar groups in the N-terminal domain of calmodulin (N-cam). Several variants were characterized using fluorescence, circular dichroism, and NMR spectroscopy. Strikingly, the replacement of polar side chains glutamine and lysine at positions 41 and 75 with nonpolar side chains leads to dramatic enhancement of the stability of the Ca(2+)-free state, a corresponding decrease in Ca(2+)-binding affinity, and an apparent loss of ability to change conformation to the open form. The results suggest a paradigm for conformational change in which energetic strain is accumulated in one state in order to modulate the energetics of change to the alternative state.     

Probing Ca2+-induced conformational changes in porcine calmodulin by H/D exchange and ESI-MS: effect of cations and ionic strength

We applied a new method, "protein-ligand interaction using mass spectrometry, titration, and H/D exchange" (PLIMSTEX) [Zhu, M. M. (2003) J. Am. Chem. Soc. 125, 5252-5253], to determine the conformational changes, binding stoichiometry, and binding constants for Ca(2+) interactions with calmodulin (CaM) under varying conditions of electrolyte identity and ionic strength. The outcome shows that CaM becomes less solvent-accessible and more compact upon Ca(2+)-binding, as revealed by the PLIMSTEX curve. The formation of CaM-4Ca species is the biggest contributor to the shape of the titration curve, indicating that the formation of this species accounts for the largest conformational change in the stepwise Ca(2+) binding. The Ca(2+)-binding constants, when comparisons permit, agree with those in the literature within a factor of 3. The binding is influenced by ionic strength and the presence of other cations, although many of these cations do not cause conformational change in apo-CaM. Furthermore, Ca(2+)-saturated CaM exhibits larger protection and higher Ca(2+) affinity in media of low rather than high ionic strength. Both Ca(2+) and Mg(2+) bind to CaM with different affinities, causing different conformational changes. K(+), if it does bind, causes no detectable conformational change, and interactions of Ca(2+) with CaM in the presence of Li(+), Na(+), and K(+) occur with similar affinities and associated changes in solvent accessibility. These metal ion effects point to nonspecific rather than competitive binding of alkali-metal ions. The rates of deuterium uptake by the various CaM-xCa species follow a three-group (fast, intermediate, slow), pseudo-first-order kinetics model. Calcium binding causes the number of amide hydrogens to shift from the fast to the slow group. The results taken together not only provide new insight into CaM but also indicate that both PLIMSTEX and kinetic modeling of H/D exchange data may become general methods for probing protein conformations and quantifying protein-ligand interactions.     

Mechanism of action of the novel plasma membrane Ca(2+)-pump inhibitor caloxin

Caloxin 2A1 is a novel inhibitor of the plasma membrane (PM) Ca(2+)-pump [Am. J. Physiol. Cell Physiol. 280 (2001) C1027]. The PM Ca(2+)-pump is a Ca(2+)-Mg(2+)-ATPase that expels Ca(2+) from cells to help them maintain low concentrations of cytosolic Ca(2+). Caloxin 2A1 inhibits Ca(2+)-Mg(2+)-ATPase in human erythrocyte leaky ghosts. Here we report that this inhibition is non-competitive with respect to the substrates Ca(2+) and ATP and the activator calmodulin. This was anticipated since the high affinity binding site for Ca(2+) and sites for ATP and calmodulin are intracellular whereas caloxin 2A1 is a peptide selected for binding to the second extracellular domain of the pump. Caloxin 2A1 also inhibited the Ca(2+)-dependent formation of the acid stable 140 kDa acylphosphate intermediate from 32P-gamma-ATP. However, it did not inhibit the formation of the acylphosphate intermediate in the reverse direction-from 32P-orthophosphate. Consistent with results on mutagenesis of transmembrane residues in the pump protein, we suggest that caloxin 2A1 inhibits conformational changes required during the reaction cycle of the pump.     

Ligand-triggered conformational perturbations elicit changes at the single cysteinyl residue of spinach calmodulin

Following application of stoichiometric amounts of Ca2+ or specific partner peptides to spinach calmodulin, dynamic changes in the nanosecond range could be monitored at a strategically anchored fluorescence or spin probe. For these studies the single cysteinyl residue 26 of spinach calmodulin was labelled with a thiol-specific proxyl (i.e. 2,2,5,5-tetramethyl-1-pyrrolidinyl-oxyl) spin probe or with a bimane fluorescence probe. With Ca2+ and a specific ligand (mastoparan) present, fluorescence studies (anisotropy, lifetime) indicated that the rotational motion of the protein complex becomes slower relative to the motion of calmodulin in the absence of the specific ligand. The probe's attachment site 26 appears to reside in a fairly polar microenvironment as reported by a series of proxyl spin probes varying in label length. The rotational correlation time of the shortest spin probe markedly changed upon binding of a specific peptide to a calmodulin region distant from that of the monitoring spin probe. We interpret these observations as indicating that ligand-triggered conformational perturbations are eliciting specific responses at the cysteinyl residue 26 of spinach calmodulin.     

Calbindin D28k exhibits properties characteristic of a Ca2+ sensor

Calbindin D(28k) is a member of the calmodulin superfamily of Ca(2+)-binding proteins and contains six EF-hands. The protein is generally believed to function as a Ca(2+) buffer, but the studies presented in this work indicate that it may also act as a Ca(2+) sensor. The results show that Mg(2+) binds to the same sites as Ca(2+) with an association constant of approximately 1.4.10(3) m(-1) in 0.15 m KCl. The four high affinity sites in calbindin D(28k) bind Ca(2+) in a non-sequential, parallel manner. In the presence of physiological concentrations of Mg(2+), the Ca(2+) affinity is reduced by a factor of 2, and the cooperativity, which otherwise is modest, increases. Based on the binding constants determined in the presence of physiological salt concentrations, we estimate that at the Ca(2+) concentration in a resting cell calbindin D(28k) is saturated to 40-75% with Mg(2+) but to less than 9% with Ca(2+). In contrast, the protein is expected to be nearly fully saturated with Ca(2+) at the Ca(2+) level of an activated cell. A substantial conformational change is observed upon Ca(2+) binding, but only minor structural changes take place upon Mg(2+) binding. This suggests that calbindin D(28k) undergoes Ca(2+)-induced structural changes upon Ca(2+) activation of a cell. Thus, calbindin D(28k) displays several properties that would be expected for a protein involved in Ca(2+)-induced signal transmission and hence may function not only as a Ca(2+) buffer but also as a Ca(2+) sensor. Digestion patterns resulting from limited proteolysis of the protein suggest that the loop of EF-hand 2, a variant site that does not bind Ca(2+), becomes exposed upon Ca(2+) binding.     

Static and kinetic studies of calmodulin and melittin complex.

Ca2+ binding to calmodulin triggers conformational change of the protein which induces exposure of hydrophobic surfaces. Melittin has been believed to bind to Ca(2+)-bound calmodulin through the exposed hydrophobic surfaces. However, tryptophan fluorescence measurements and gel chromatography experiments with the melittin-calmodulin system revealed that melittin bound to calmodulin at zero salt concentration even in the absence of Ca2+; addition of salt removed melittin from Ca(2+)-free calmodulin. This means not only the hydrophobic interaction but also the electrostatic interaction contributes to the melittin-calmodulin binding. The fluorescence stopped-flow studies of the dissociation reaction of melittin-calmodulin complex revealed that Ca2+ removal from the complex induced a conformational change of calmodulin, resulting in reduction of the hydrophobic interaction between melittin and calmodulin, but the electrostatic interaction kept melittin still bound to calmodulin for a subsecond lag period, after which melittin dissociated from calmodulin. The fluorescence stopped-flow experiments on the dissociation reaction of complex of melittin and tryptic fragment(s) of calmodulin revealed that the lag period of the melittin dissociation reaction was attributable to the interaction between the C-terminal half of calmodulin and the C-terminal region of melittin.     

IQGAP1 integrates Ca2+/calmodulin and B-Raf signaling

Ca(2+) and calmodulin modulate numerous cellular functions, ranging from muscle contraction to the cell cycle. Accumulating evidence indicates that Ca(2+) and calmodulin regulate the MAPK signaling pathway at multiple positions in the cascade, but the molecular mechanism underlying these observations is poorly defined. We previously documented that IQGAP1 is a scaffold in the MAPK cascade. IQGAP1 binds to and regulates the activities of ERK, MEK, and B-Raf. Here we demonstrate that IQGAP1 integrates Ca(2+) and calmodulin with B-Raf signaling. In vitro analysis reveals that Ca(2+) promotes the direct binding of IQGAP1 to B-Raf. This interaction is inhibited by calmodulin in a Ca(2+)-regulated manner. Epidermal growth factor (EGF) is unable to stimulate B-Raf activity in fibroblasts treated with the Ca(2+) ionophore A23187. In contrast, chelation of intracellular free Ca(2+) concentrations ([Ca(2+)](i)) significantly enhances EGF-stimulated B-Raf activity, an effect that is dependent on IQGAP1. Incubation of cells with EGF augments the association of B-Raf with IQGAP1. Moreover, Ca(2+) regulates the association of B-Raf with IQGAP1 in cells. Increasing [Ca(2+)](i) with Ca(2+) ionophores significantly reduces co-immunoprecipitation of B-Raf and IQGAP1, whereas chelation of Ca(2+) enhances the interaction. Consistent with these findings, increasing and decreasing [Ca(2+)](i) increase and decrease, respectively, co-immunoprecipitation of calmodulin with IQGAP1. Collectively, our data identify a previously unrecognized mechanism in which the scaffold protein IQGAP1 couples Ca(2+) and calmodulin signaling to B-Raf function.     

A Ca2+-binding domain in RyR1 that interacts with the calmodulin binding site and modulates channel activity

A fragment of RyR1 (amino acids 4064-4210) is predicted to fold to at least one lobe of calmodulin and to bind Ca(2+). This fragment of RyR1 (R4064-4210) was subcloned, expressed, refolded, and purified. Consistent with the predicted folding pattern, R4064-4210 was found to bind two molecules of Ca(2+) and undergo a structural change upon binding Ca(2+) that exposes hydrophobic amino acids. R4064-4210 also binds to RyR1, the L-type Ca(2+) channel (Cav(1.1)), and several synthetic calmodulin binding peptides. Both R4064-4210 and a peptide representing the calmodulin-binding region of RyR1 (R3614-3643) alter the Ca(2+) dependence of ((3)H)ryanodine binding to RyR1, suggesting that they may both be interfering with an intramolecular interaction between amino acids 4064-4210 and amino acids 3614-3643 in the native RyR1 to alter or regulate the response of the channel to changes in Ca(2+) concentration. The finding that a domain within RyR1 binds Ca(2+) and interacts with calmodulin-binding motifs may provide insights into the mechanism for calcium- and calmodulin-dependent regulation of this channel and perhaps for its regulation by the L-type Ca(2+) channel.     

Monitoring the total available calmodulin concentration in intact cells over the physiological range in free Ca2+

We describe the design, characterization and application of a new genetically encoded fluorescent biosensor for intracellular detection of both free Ca(2+)-calmodulin and apocalmodulin, which together comprise the available calmodulin concentration. The biosensor binds both forms of calmodulin with an apparent Kd value of 3 microM, and has kinetic properties making it suitable for monitoring dynamic changes on a subsecond time scale. It can be used in conjunction with the fluorescent Ca(2+)-indicator, indo-1, allowing the available calmodulin and free Ca2+ concentrations to be monitored concurrently. We have determined an intracellular available calmodulin concentration of 8.8 +/- 2.2 microM under resting conditions in a human kidney cell line stably expressing the biosensor. Elevation of the intracellular free Ca2+ concentration by agonist, store-operated Ca(2+)-entry or ionophore results in Ca(2+)-dependent consumption of the available calmodulin. A plot of normalized values for the available calmodulin concentration versus the free Ca2+ concentration fits a consumption curve with a cooperativity coefficient of 1.8 and a [Ca2+]50 of 850 nM. There is no detectible binding of calmodulin to the biosensor above a free Ca2+ concentration of approximately 4 microM, consistent with an available calmodulin concentration < or = 200 nM under these conditions, and an overall excess of calmodulin-binding sites.     

Anti-calmodulins and tricyclic adjuvants in pain therapy block the TRPV1 channel

Ca(2+)-loaded calmodulin normally inhibits multiple Ca(2+)-channels upon dangerous elevation of intracellular Ca(2+) and protects cells from Ca(2+)-cytotoxicity, so blocking of calmodulin should theoretically lead to uncontrolled elevation of intracellular Ca(2+). Paradoxically, classical anti-psychotic, anti-calmodulin drugs were noted here to inhibit Ca(2+)-uptake via the vanilloid inducible Ca(2+)-channel/inflamatory pain receptor 1 (TRPV1), which suggests that calmodulin inhibitors may block pore formation and Ca(2+) entry. Functional assays on TRPV1 expressing cells support direct, dose-dependent inhibition of vanilloid-induced (45)Ca(2+)-uptake at microM concentrations: calmidazolium (broad range) > or = trifluoperazine (narrow range) chlorpromazine/amitriptyline>fluphenazine>W-7 and W-13 (only partially). Most likely a short acidic domain at the pore loop of the channel orifice functions as binding site either for Ca(2+) or anti-calmodulin drugs. Camstatin, a selective peptide blocker of calmodulin, inhibits vanilloid-induced Ca(2+)-uptake in intact TRPV1(+) cells, and suggests an extracellular site of inhibition. TRPV1(+), inflammatory pain-conferring nociceptive neurons from sensory ganglia, were blocked by various anti-psychotic and anti-calmodulin drugs. Among them, calmidazolium, the most effective calmodulin agonist, blocked Ca(2+)-entry by a non-competitive kinetics, affecting the TRPV1 at a different site than the vanilloid binding pocket. Data suggest that various calmodulin antagonists dock to an extracellular site, not found in other Ca(2+)-channels. Calmodulin antagonist-evoked inhibition of TRPV1 and NMDA receptors/Ca(2+)-channels was validated by microiontophoresis of calmidazolium to laminectomised rat monitored with extracellular single unit recordings in vivo. These unexpected findings may explain empirically noted efficacy of clinical pain adjuvant therapy that justify efforts to develop hits into painkillers, selective to sensory Ca(2+)-channels but not affecting motoneurons.     

Identification of the components controlling inactivation of voltage-gated Ca2+ channels

Ca(2+)-dependent inactivation (CDI) of L-type voltage-gated Ca(2+) channels limits Ca(2+) entry into neurons, thereby regulating numerous cellular events. Here we present the isolation and purification of the Ca(2+)-sensor complex, consisting of calmodulin (CaM) and part of the channel's pore-forming alpha(1C) subunit, and demonstrate the Ca(2+)-dependent conformational shift that underlies inactivation. Dominant-negative CaM mutants that prevent CDI block the sensor's Ca(2+)-dependent conformational change. We show how Ile1654 in the CaM binding IQ motif of alpha(1C) forms the link between the Ca(2+) sensor and the downstream inactivation machinery, using the alpha(1C) EF hand motif as a signal transducer to activate the putative pore-occluder, the alpha(1C) I-II intracellular linker.     

Ca(2+)- and H(+)-dependent conformational changes of calbindin D(28k)

Calbindin D(28k) is a member of a large family of intracellular Ca(2+) binding proteins characterized by EF-hand structural motifs. Some of these proteins are classified as Ca(2+)-sensor proteins, since they are involved in transducing intracellular Ca(2+) signals by exposing a hydrophobic patch on the protein surface in response to Ca(2+) binding. The hydrophobic patch serves as an interaction site for target enzymes. Other members of this group are classified as Ca(2+)-buffering proteins, because they remain closed after Ca(2+) binding and participate in Ca(2+) buffering and transport functions. ANS (8-anilinonaphthalene-1-sulfonic acid) binding and affinity chromatography on a hydrophobic column suggested that both the Ca(2+)-free and Ca(2+)-loaded form of calbindin D(28k) have exposed hydrophobic surfaces. Since exposure of hydrophobic surface is unfavorable in the aqueous intracellular milieu, calbindin D(28k) most likely interacts with other cellular components in vivo. A Ca(2+)-induced conformational change was readily detected by several optical spectroscopic methods. Thus, calbindin D(28k) shares some of the properties of Ca(2+)-sensor proteins. However, the Ca(2+)-induced change in exposed hydrophobic surface was considerably less pronounced than that in calmodulin. The data also shows that calbindin D(28k) undergoes a rapid and reversible conformational change in response to a H(+) concentration increase within the physiological pH range. The pH-dependent conformational change was shown to reside mainly in EF-hands 1-3. Urea-induced unfolding of the protein at pH 6, 7, and 8 showed that the stability of calbindin D(28k) was increased in response to H(+) in the range examined. The results suggest that calbindin D(28k) may interact with targets in a Ca(2+)- and H(+)-dependent manner.