Purification and characterization of aqualysin I (a thermophilic alkaline serine protease) produced by Thermus aquaticus YT-1

Aqualysin I is an alkaline serine protease which is secreted into the culture medium by Thermus aquaticus YT-1. Aqualysin I was purified, and its apparent relative molecular mass was determined to be 28 500. The enzyme contained four Cys residues (probably as two cystines), and its amino acids composition was similar to those of cysteine-containing serine proteases (proteinase K, etc.) as well as those of subtilisins. The NH2-terminal sequence of aqualysin I showed homology with those of the microbial serine proteases. The optimum pH for the proteolytic activity of aqualysin I was around 10.0. Ca2+ stabilized the enzyme to heat treatment, and the maximum proteolytic activity was observed at 80 degrees C. Aqualysin I was stable to denaturing reagents (7 M urea, 6 M guanidine.HCl and 1% SDS) at 23 degrees C for 24 h. The enzyme hydrolyzed the ester bond of an alanine ester and succinyl-Ala-Ala-Ala p-nitroanilide, a synthetic substrate for mammalian elastase. The cleavage sites for aqualysin I in oxidized insulin B chain were not specific when it was digested completely.     

Role of disulphide bonds in a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1

A thermophilic serine protease, Aqualysin I, from Thermus aquaticus YT-1 has two disulphide bonds, which are also found in a psychrophilic serine protease from Vibrio sp. PA-44 and a proteinase K-like enzyme from Serratia sp. at corresponding positions. To understand the significance of these disulphide bonds in aqualysin I, we prepared mutants C99S, C194S and C99S/C194S (WSS), in which Cys69-Cys99, Cys163-Cys194 and both of these disulphide bonds, respectively, were disrupted by replacing Cys residues with Ser residues. All mutants were expressed stably in Escherichia coli. The C99S mutant was 68% as active as the wild-type enzyme at 40 degrees C in terms of k(cat) value, while C194S and WSS were only 6 and 3%, respectively, as active, indicating that disulphide bond Cys163-Cys194 is critically important for maintaining proper catalytic site conformation. Mutants C194S and WSS were less thermostable than wild-type enzyme, with a half-life at 90 degrees C of 10 min as compared to 45 min of the latter and with transition temperatures on differential scanning calorimetry of 86.7 degrees C and 86.9 degrees C, respectively. Mutant C99S was almost as stable as the wild-type aqualysin I. These results indicate that the disulphide bond Cys163-Cys194 is more important for catalytic activity and conformational stability of aqualysin I than Cys67-Cys99.     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

Nucleotide sequence and characteristics of the gene for L-lactate dehydrogenase of Thermus aquaticus YT-1 and the deduced amino acid sequence of the enzyme

The gene for L-lactate dehydrogenase (LDH) from Thermus aquaticus YT-1 was cloned in Escherichia coli, using the Thermus caldophilus LDH gene as a hybridization probe, and its complete nucleotide sequence was determined. The LDH gene comprised 930 base pairs, starting with a GTG initiation codon. Its sequence had high homology (85.8% identity) with the LDH gene of T. caldophilus. The G + C content of the T. aquaticus gene was 70.9%, higher than that of the chromosomal DNA (67.4%). In particular, that in the third position of the codons used was 91.0%, similar to the T. caldophilus gene. The primary structure of T. aquaticus LDH was deduced from the nucleotide sequence of the LDH gene. It comprises 310 amino acid residues, as does T. caldophilus LDH, and its molecular mass was calculated to be 33,210 daltons. The amino acid sequence of the T. aquaticus LDH had 87.1% identity with that of the T. caldophilus LDH. At 23 positions, the respective residues differed in charge and polarity. These differences must be related to the differences in kinetic properties between the two enzymes. The constructed plasmid overproduced the T. aquaticus LDH in E. coli.     

Nucleotide sequence of the gene for alkaline phosphatase of Thermus caldophilus GK24 and characteristics of the deduced primary structure of the enzyme

The gene encoding Thermus caldophilus GK24 (Tca) alkaline phosphatase was cloned into Escherichia coli. The primary structure of Tca alkaline phosphatase was deduced from its nucleotide sequence. The Tca alkaline phosphatase precursor, including the signal peptide sequence, was comprised of 501 amino acid residues. Its molecular mass was determined to be 54? omitted?760 Da. On the alignment of the amino acid sequence, Tca alkaline phosphatase showed sequence homology with the microbial alkaline phosphatases, 20% identity with E. coli alkaline phosphatase and 22% Bacillus subtilis (Bsu) alkaline phosphatases. High sequence identity was observed in the regions containing the Ser-102 residue of the active site, the zinc and magnesium binding sites of E. coli alkaline phosphatase. Comparison of Tca alkaline phosphatase and E. coli alkaline phosphatase structures suggests that the reduced activity of the Tca alkaline phosphatase, in the presence of zinc, is directly involved in some of the different metal binding sites. Heat-stable Tca alkaline phosphatase activity was detected in E. coli YK537, harboring pJRAP.     

Weakly bound calcium ions involved in the thermostability of aqualysin I, a heat-stable subtilisin-type protease of Thermus aquaticus YT-1.

Aqualysin I is a heat-stable protease; in the presence of 1 mM Ca(2+), the enzyme is stable at 80 degrees C and shows the highest activity at the same temperature. After gel filtration to remove free Ca(2+) from the purified enzyme sample, the enzyme (holo-aqualysin I) still bound Ca(2+) (1 mol/mol of the enzyme), but was no longer stable at 80 degrees C. On treatment of the holo-enzyme with EDTA, bound Ca(2+) decreased to about 0.3 mol/mol of the enzyme. The thermostability of holo-aqualysin I was dependent on the concentration of added Ca(2+), and 1 mM added Ca(2+) stabilized the enzyme completely, suggesting that aqualysin I has at least two Ca(2+) binding sites, i.e. stronger and weaker binding ones. Titration calorimetry showed single binding of Ca(2+) to the holo-enzyme with an association constant of 3.1 x 10(3) M(-1), and DeltaH and TDeltaS were calculated to be 2.3 and 6.9 kcal/mol, respectively, at 13 degrees C. La(3+), Sr(2+), Nd(3+), and Tb(3+) stabilized the holo-enzyme at 80 degrees C, as Ca(2+) did. These results suggest that the weaker binding site exhibits structural flexibility to bind several metal cations different in size and valency, and that the metal binding to the weaker binding site is essential for the thermostability of aqualysin I.     

Nucleotide sequence and characteristics of the gene for L-lactate dehydrogenase of Thermus caldophilus GK24 and the deduced amino-acid sequence of the enzyme

The gene for L-lactate dehydrogenase (LDH) (EC 1.1.1.27) of Thermus caldophilus GK24 was cloned in Escherichia coli using synthetic oligonucleotides as hybridization probes. The nucleotide sequence of the cloned DNA was determined. The primary structure of the LDH was deduced from the nucleotide sequence. The deduced amino acid sequence agreed with the NH2-terminal and COOH-terminal sequences previously reported and the determined amino acid sequences of the peptides obtained from trypsin-digested T. caldophilus LDH. The LDH comprised 310 amino acid residues and its molecular mass was determined to be 32,808. On alignment of the whole amino acid sequences, the T. caldophilus LDH showed about 40% identity with the Bacillus stearothermophilus, Lactobacillus casei and dogfish muscle LDHs. The T. caldophilus LDH gene was expressed with the E. coli lac promoter in E. coli, which resulted in the production of the thermophilic LDH. The gene for the T. caldophilus LDH showed more than 40% identity with those for the human and mouse muscle LDHs on alignment of the whole nucleotide sequences. The G + C content of the coding region for the T. caldophilus LDH was 74.1%, which was higher than that of the chromosomal DNA (67.2%). The G + C contents in the first, second and third positions of the codons used were 77.7%, 48.1% and 95.5% respectively. The high G + C content in the third base caused extremely non-random codon usage in the LDH gene. About half (48.7%) the codons in the LDH gene started with G, and hence there were relatively high contents of Val, Ala, Glu and Gly in the LDH. The contents of Pro, Arg, Ala and Gly, which have high G + C contents in their codons, were also high. Rare codons with U or A as the third base were sometimes used to avoid the TCGA sequence, the recognition site for the restriction endonuclease, TaqI. Two TCGA sequences were found only in the sequence of CTCGAG (XhoI site) in the sequenced region of the T. caldophilus DNA. There were three segments with similar sequences in the two 5' non-coding regions, probably the promoter and ribosome-binding regions, of the genes for the T. caldophilus LDH and the Thermus thermophilus 3-isopropylmalate dehydrogenase.     

Studies on immobilization of the thermophilic bacterium Thermus aquaticus YT-1 by entrapment in various matrices

Summary Immobilization of the thermophilic bacterium Thermus aquaticus YT-1 has been studied using various entrapment techniques. Alginate, -carrageenan, agar, agarose and polyacrylamide were tested as supports during operation at 65°C at which the cells are known to produce protease when grown free in solution. Alginate showed toxic effects and no viability was observed after entrapment in Ca alginate or even after exposure of free living cells to sodium alginate. Polyacrylamide was observed to be the best support. Protease activity was closely related to the appearance of free cells in the medium.     

Role of the COOH-terminal pro-sequence of aqualysin I (a heat-stable serine protease) in its extracellular secretion by Thermus thermophilus

Aqualysin I is a subtilisin-type serine protease secreted into the medium by Thermus aquaticus YT-1. Thermus thermophilus cells harboring a plasmid for the aqualysin I precursor secreted pro-aqualysin I with the C-terminal pro-sequence into the culture medium, and the precursor was then processed to the mature enzyme during the cultivation. However, the extracellular levels of aqualysin I in T. thermophilus cells harboring plasmids for deletion mutants as to the C-terminal pro-sequence were about 10–20% in comparison with the level of wild-type. Only the mature enzyme could be detected in the medium, while pro-aqualysin I with the C-terminal pro-sequence could not. These results suggest that the C-terminal pro-sequence of aqualysin I plays an important role in the extracellular secretion of aqualysin I.     

Molecular cloning and nucleotide sequence of 3-isopropylmalate dehydrogenase gene (leuB) from an extreme thermophile, Thermus aquaticus YT-1

A gene (leuB) coding for 3-isopropylmalate dehydrogenase [EC 1.1.1.85] from an extreme thermophile, Thermus aquaticus YT-1 was cloned in Escherichia coli and the nucleotide sequence was determined. It contains an open reading frame of 1,035 bp encoding 344 amino acid residues. The homology with that from T. thermophilus HB8 is 87.0% in nucleotide and 91.3% in amino acid sequences. No overlapped gene was found in the present leuB gene, in contrast to the previous prediction that Thermus leuD gene is overlapped with leuB [Croft et al. (1987) Mol. Gen. Genet. 210, 490-497]. Substitutions in the primary structure which are unique for the thermophile sequences are discussed in relation to the unusual stability of the thermophile dehydrogenase based on amino acid sequence comparison of 9 microorganisms including thermophiles and mesophiles.     

Purification and Characterization of a Thermostable Carboxypeptidase (Carboxypeptidase Taq) from Thermus aquaticus YT-1

Brassinosteroid (BR) and auxin co-regulate plant growth in a process termed cross-talking. Based on the assumption that their signal transductions are partially shared, inhibitory chemicals for both signal transductions were screened from a commercially available library. A chemical designated as NJ15 (ethyl 2-[5-(3,5-dichlorophenyl)-1,2,3,4-tetrazole-2-yl]acetate) diminished the growth promotion of both adzuki bean epicotyls and Arabidopsis seedlings, by the application of either BR or auxin. To understand its target site(s), bioassays with a high dependence on the signal transduction of either BR (BR-signaling) or auxin (AX-signaling) were performed. NJ15 inhibited the photomorphogenesis of Arabidopsis seedlings grown in the dark, which mainly depends on BR-signaling, while NJ15 also inhibited their gravitropic responses mainly depending on AX-signaling. On the study for the structure–activity relationships of NJ15 analogs, they showed strong correlations on the inhibitory profiles between BR- and AX-signalings. These correlations imply that NJ15 targets the downstream pathway after the integration of BR- and AX-signals.     

Purification and characterization of a thermostable carboxypeptidase (carboxypeptidase Taq) from Thermus aquaticus YT-1.

A thermostable carboxypeptidase, which we named carboxypeptidase Taq, was purified from Thermus aquaticus YT-1 and characterized. The molecular weight of the enzyme was estimated to be about 56,000 and 58,000 on SDS-polyacrylamide gel electrophoresis and gel filtration, respectively, indicating that the enzyme has a monomeric structure. The optimum pH of the enzyme was 8.0, and the optimum temperature for the reaction was 80 degrees C. The enzyme activity was dependent on cobalt ion and was inhibited by metal-chelating reagents, indicating that the enzyme is a metalloenzyme. The enzyme had high thermostability independent of cobalt ion; about 90% of its activity remained even after treatment at 80 degrees C for 5 h. The enzyme showed broad substrate specificity, although proline at the C-terminus of peptides was not cleaved. The enzyme released amino acids sequentially from the C-terminus.     

Identification and designing of the S3 site of aqualysin I, a thermophilic subtilisin-related serine protease.

Aqualysin I is a bacterial subtilisin-related alkaline serine protease, originating in Thermus aquaticus YT-1. Based on computational analysis, we predicted that two residues, Ser102 and Gly131, form the S3 site of aqualysin I, and we proved that this prediction by site-directed mutagenesis. To alter the P3-specificity of the enzyme, we built a "wall" on the S3 site edge by introducing a bulky side chain at target sites. Six mutant proteins were prepared: S102H, S102K, S102E, G131H, G131K, and G131D. The mutant enzymes were examined with two kinetically typical peptides for aqualysin I, suc-X-Ala-Ala-pNA, where X is Ala or Phe. All mutations reduced the efficiency for the Phe-containing peptide, while they raised the k(cat) values for the Ala-containing peptide. Especially, the S102K mutant protein hydrolyzed the polyalanine peptide efficiently. The strategies we have adopted in this paper are applicable to all subtilisin-related enzymes.     

Stability of Thermostable Enzyme,Aqualysin I ; a Subtilisin-type Serine Protease from Thermus aquaticus YT-1

We characterized the heat stability and detergent stabilities of aqualysin I, produced by Thermus aquaticus YT-1, and compared them with those of fungal proteinase K and Bacillus subtilisin.

Aqualysin I displayed excellent heat and detergent stabilities. Proteinase K, another Cys-containing enzyme, was less stable than aqualysin I. All these enzymes maintained activities in the presence of urea or Tween-20.     

Efficient production of Thermus protease aqualysin I in Escherichia coli: effects of cloned gene structure and two-stage culture

 The DNA sequence encoding Thermus protease aqualysin I was inserted downstream from a bacteriophage T7 promoter in an expression vector. In the T7 expression system, using a strain lacking an F′ episome, aqualysin I was produced in soluble form without chemical induction. The deletions of part (30 amino acid residues) or all (105 residues) of the C-terminal pro-sequence from the C terminus significantly affected both cellular growth and the production of the enzyme. Complete deletion adversely affected both. In contrast, the 30-residue deletion markedly improved productivity by approximately four times compared to non-deletion, and shortened the time needed for the activation of a precursor to active enzyme. The concentration of inducer isopropyl β-D-thiogalactopyrano-side (IPTG) was varied to examine its effects, and it was found that a low concentration of IPTG improved aqualysin I production. To avoid the inhibitory effects of acetic acid accumulation in the culture medium, the use of other carbon sources besides glucose was examined. When cells were cultivated with glycerol, the acetic acid level remained relatively low, and both good cellular growth and a high level of production were attained. The aqualysin I productivity for a fed-batch culture using two carbon sources, glucose and glycerol, reached more than 150 kU/ml enzymatically active aqualysin I. Received: 19 May 1995/Received revision: 28 July 1995/Accepted: 22 August 1995     

The recA gene from the thermophile Thermus aquaticus YT-1: cloning, expression, and characterization.

We have cloned, expressed, and purified the RecA analog from the thermophilic eubacterium Thermus aquaticus YT-1. Analysis of the deduced amino acid sequence indicates that the T. aquaticus RecA is structurally similar to the Escherichia coli RecA and suggests that RecA-like function has been conserved in thermophilic organisms. Preliminary biochemical analysis indicates that the protein has an ATP-dependent single-stranded DNA binding activity and can pair and carry out strand exchange to form a heteroduplex DNA under reaction conditions previously described for E. coli RecA, but at 55 to 65 degrees C. Further characterization of a thermophilically derived RecA protein should yield important information concerning DNA-protein interactions at high temperatures. In addition, a thermostable RecA protein may have some general applicability in stabilizing DNA-protein interactions in reactions which occur at high temperatures by increasing the specificity (stringency) of annealing reactions.     

The primary structure and structural characteristics of Achromobacter lyticus protease I, a lysine-specific serine protease

The complete amino acid sequence of Achromobacter lyticus protease I (EC 3.4.21.50), which specifically hydrolyzes lysyl peptide bonds, has been established. This has been achieved by sequence analysis of the reduced and S-carboxymethylated protease and of peptides obtained by enzymatic digestion with Achromobacter protease I itself and Staphylococcus aureus V8 protease and by chemical cleavage with cyanogen bromide. The protease consists of 268 residues with three disulfide bonds, which have been assigned to Cys6-Cys216, Cys12-Cys80, and Cys36-Cys58. Comparison of the amino acid sequence of Achromobacter protease and other serine proteases of bacterial and mammalian origins has revealed that Achromobacter protease I is a mammalian-type serine protease of which the catalytic triad comprises His57, Asp113, and Ser194. It has also been shown that the protease has 9- and 26-residue extensions of the peptide chain at the N and C termini, respectively, and overall sequence homology is as low as 20% with bovine trypsin. The presence of a disulfide bridge between the N-terminal extension Cys6 and Cys216 close to the putative active site in the C-terminal region is thought to be responsible for the generation of maximal proteolytic function in the pH range 8.5-10.7 and enhanced stability to denaturation.