The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

Polyhydroxybutyrate: An intriguing biopolymer

The microbial polymer poly-3-hydroxybutyrate (PHB) and related poly-hydroxyalkanoates, such as poly-3-hydroxyvalerate and poly-3-hydroxyoctanoate, are unique biodegradable thermoplastics of considerable commercial importance. The structure, properties and regulation of synthesis and degradation of PHB are reviewed and the microbial production of copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate, with properties varying according to copolymer composition, is discussed.     

Synthesis and properties of star-shaped polylactide attached to poly(amidoamine) dendrimer

Star-shaped polylactide was synthesized by bulk polymerization of lactide with poly(amidoamine) (PAMAM) dendrimer as initiator, which was marked as PAMAM-g-PLA for simplicity. The nonlinear architecture of PAMAM-g-PLA was confirmed by gel permeation chromatograph, nuclear magnetic resonance, and differential scanning calorimetry analysis. Unlike the linear polylactide (PLA) with similar molecular weight, PAMAM-g-PLA had a higher hydrophilicity and a faster degradation rate because of shortened polymer chains and increased polar terminal endgroups due to its branch structure. The highly branched structure significantly accelerated the release of water-soluble bovine serum albumin from PAMAM-g-PLA microspheres, whereas the linear PLA with similar molecular weight exhibited an initial time lag release. This star polymer may have potential applications for hydrophilic drug delivery in tissue engineering, including growth factor and antibodies to induce tissue regeneration, by adjusting the chain lengths of PLA branches.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.     

Intracellular depolymerase activity in isolated inclusion bodies containing polyhydroxyalkanoates with long alkyl and functional substituents in the side chain.

The in vitro degradation of isolated Pseudomonas oleovorans inclusion bodies containing either poly-3-hydroxynonanoate (PHN), or poly(-3-hydroxy-5-phenylvalerate) (PHPV), or a mixture of these two polymers was investigated. When incubated at 30 degrees C and pH 9, inclusion bodies containing either polyhydroxyoctanoate (PHO), PHN or PHPV exhibited similar degradation rates of approximately 0.94 (+/- 3%) mg/h. The PHN and PHPV components for inclusion bodies containing a mixture of PHN and PHPV showed similar degradation rates; that is the ratios showed little change and remained at approximately 50 wt.% (+/- 3%) for each component. These results contrast markedly with in vivo studies for similar inclusion bodies in whole cells. The results suggest that the synthesis and degradation of these novel polyhydroxyalkanoates by P. oleovorans proceeds by the same enzymatic pathway. In addition, comparisons between the in vivo and in vitro polymer degradation suggest that the activity of the intracellular depolymerase does not control the rate limiting step of PHPV degradation in vivo. Instead, the presence of an aromatic group in the repeating units of this polymer may inhibit the utilization of the monomeric units of PHPV as a reserve carbon source by the cells.     

Determination of pentose sugars in fermentation solutions by a simple gas chromatographic procedure

Summary Pentoses in aqueous acidic solutions were analysed by conversion to furfurals in a gas chromatograph containing a porous polymer packed column at 200°C. Hexoses, volatile fatty acids and fermentation media did not interfere with the measurement of pentoses.     

Determination of 4-(4-chlorophenyl)-4-hydroxypiperidine, a metabolite of haloperidol, by gas chromatography with electron-capture detection

An electron-capture gas chromatographic procedure was developed for the analysis of 4-(4-chlorophenyl)-4-hydroxypiperidine (CPHP), a metabolite of haloperidol. The assay involved basic extraction of this metabolite from the biological samples, followed by back-extraction with HCl. After basification of the acid phase, extractive derivatization with pentafluorobenzoyl chloride in toluene was conducted. The pentafluorobenzoyl derivative was quantified on a gas chromatograph equipped with a fused-silica capillary column, an electron-capture detector and a printer-integrator. N-(3-Trifluoromethylphenyl)piperazine was carried through the procedure as an internal standard and calibration curves were determined for each assay run. The procedure was demonstrated to be linear and reproducible and was utilized to detect and quantify CPHP in urine, plasma, brain and liver samples from rats treated with haloperidol. The structure of the derivatized metabolite was confirmed by gas chromatography-mass spectrometry.     

Detection of endogenous ethanol and other compounds in the breath by gas chromatography with on-column concentration of sample

A new method is described for collecting and concentrating volatile compounds in the breath, in order to facilitate their assay by gas chromatography. Breath was collected into sealed Mylar bags containing an internal standard (isopropyl alcohol). The sample was pumped through a cooled gas chromatograph column, where the volatile compounds were concentrated by adsorption onto the resin packing (Porapak Q) at 35 degrees C. The column was then heated, and the volatilized sample was separated for assay by flame ionization detection. The assay was highly sensitive for ethanol (detecting at least 4.0 nmol) and linear up to 20 nmol (r2 = 0.98). Accuracy and precision were determined by assaying nine replicates of a sample containing 12.0 nmol ethanol; a mean value of 12.18 nmol ethanol was obtained with a coefficient of variation of 10.26%. In a group of normal volunteers, endogenous breath ethanol concentrations ranged from 2.23 to 6.51 nmol/liter. This assay provided a number of advantages over previously described methods: The use of breath collection bags enabled the collection of samples outside the laboratory. The use of an internal standard in the collection bag reduced errors that might have resulted from leakage of the specimen. An on-column concentration of the sample in the gas chromatograph eliminated the need for an additional preconcentration device, such as a cryogenic or adsorptive trapping apparatus.     

A lipid intermediate in the synthesis of a poly-(N-acetylglucosamine 1-phosphate) from the wall of Staphylococcus lactis N.C.T.C. 2102

1. The enzymic synthesis of the wall polymer poly-(N-acetylglucosamine 1-phosphate) in Staphylococcus lactis N.C.T.C. 2102 was studied by using UDP-[acetyl-(14)C]N-acetylglucosamine and the corresponding nucleotide containing (32)P. 2. Labelled material was extracted from the particulate enzyme preparation with butan-1-ol. Pulse-labelling experiments indicated that this material contained an intermediate in the biosynthesis. 3. The lipid intermediate was partially purified, and chemical and enzymic degradation showed that it was composed of N-acetylglucosamine 1-pyrophosphate in labile ester linkage to an organic-soluble alcohol, possibly a polyisoprenoid alcohol. The methanolysis of sugar 1-pyrophosphate derivatives, including nucleoside diphosphate sugars, is discussed in relation to degradation products obtained from the lipid. 4. The lipids from the particulate enzyme preparation probably contained another compound in which N-acetylglucosamine 1-phosphate is attached to an organic-soluble alcohol; this may participate in the biosynthesis of another polysaccharide. 5. The function of the lipid intermediate in polymer biosynthesis is discussed.     

Reaction of loose connective tissue fibroblasts after poly-4-vinylpyridine administration

Mice were injected with poly-4-vinylpyridine at a dose known to be effective for immunogenesis stimulation. Within 24 hours after the injection fibroblasts reacted by dendrit production, cytoplasm vacuolization and clasmocytosis. 2-3 days after the polymer injection the fibroblast cytoplasm was restored. The immunofluorescence employed rabbit serum natural antibodies to fibroblast antigens. The reaction observed may be used for the estimation of biological polymer activity.     

Electrophoretic identification of poly-γ-glutamate chain-lengths of 5,10-methylenetetrahydrofolate using thymidylate synthetase complexes

A method has been developed to characterize the poly-γ-glutamates of 5,10-methyl-enetetrahydrofolate. Incorporation of 5,10-methylenetetrahydrofolates into a ternary complex with L. casei thymidylate synthetase and 5-fluoro-2-deoxy[³H]uridylate stabilizes the reduced folate against oxidation, loss of the one carbon moiety, and poly-γ-glutamate degradation. The covalent ternary complexes, containing 5,10-methylenetetrahydrofolate polyglutamates, were resolved electrophoretically. Electrophoretic mobility was shown to be a linear function of polyglutamate chain-length. The method can potentially be applied to analysis of chemically prepared folate polyglutamates, the monitoring of enzyme-mediated interconversions of polyglutamates and characterization of tissue extract polyglutamates.     

Microbial degradation of polyhydroxyalkanoates in tropical soils

The integrated study addressing biodegradation of microbial linear polyesters of hydroxyalkanoic acids (polyhydroxyalkanoates, PHAs) in tropical conditions by microbial communities of Vietnamese soils was performed in locations close to Hanoi and Nha Trang, which differed in their weather conditions and microbial communities. It shows that PHA degradation in tropical soils is influenced by polymer chemical composition, specimen shape, and microbial characteristics. The homopolymer of 3-hydroxybutyric acid is degraded at higher rates than the copolymer of 3-hydroxybutyric and 3-hydroxyvaleric acids. The average rates of mass loss were 0.04–0.33% per day for films and 0.02–0.18% for compact pellets. PHA degradation was accompanied by a decrease in the polymer molecular mass and, usually, an increase in the degree of crystallinity, suggesting preferential degradation of the amorphous phase. Under the study conditions, representatives of the bacterial genera Burkholderia, Bacillus, Cupriavidus, Mycobacterium, and Nocardiopsis and such micromycetes as Acremonium, Gongronella, Paecilomyces, and Penicillium, Trichoderma have been identified as major PHA degraders.     

Properties of engineered poly-3-hydroxyalkanoates produced in recombinant Escherichia coli strains

To prepare medium-chain-length poly-3-hydroxyalkanoates (PHAs) with altered physical properties, we generated recombinant Escherichia coli strains that synthesized PHAs with altered monomer compositions. Experiments with different substrates (fatty acids with different chain lengths) or different E. coli hosts failed to produce PHAs with altered physical properties. Therefore, we engineered a new potential PHA synthetic pathway, in which ketoacyl-coenzyme A (CoA) intermediates derived from the beta-oxidation cycle are accumulated and led to the PHA polymerase precursor R-3-hydroxyalkanoates in E. coli hosts. By introducing the poly-3-hydroxybutyrate acetoacetyl-CoA reductase (PhbB) from Ralstonia eutropha and blocking the ketoacyl-CoA degradation step of the beta-oxidation, the ketoacyl-CoA intermediate was accumulated and reduced to the PHA precursor. Introduction of the phbB gene not only caused significant changes in the monomer composition but also caused changes of the physical properties of the PHA, such as increase of polymer size and loss of the melting point. The present study demonstrates that pathway engineering can be a useful approach for producing PHAs with engineered physical properties.     

The polymerization of alpha-aminopropionitrile

The mixture of alpha-aminopropionitrile and alpha, alpha'-iminodipropionitrile polymerized to solidify almost at the temperature near 0 degrees C during 8 years. The conversions based on decreasing of those reactants were 61 and 98% at 4 and 8 years, respectively. The fractionation of 4 and 8 years product using Sephadex G 10 yielded their predominant amounts in the oligomer and polymer section, respectively. The oligomer section product of 8 years product was analyzed by means of ion exchange chromatography and its trimethylsilyl derivative was also analyzed by means of gas chromatography combined with mass spectrometry. These results identified dialanine and trialanine and their amides and nitriles.     

Determination of pentacaine, trans-2-(1-pyrrolidinyl)cyclohexyl-3-pentyloxycarbanilate hydrochloride, in biological samples by gas chromatography/mass spectrometry

A quantitative and selective method has been developed for the determination of a novel local anaesthetic compound pentacaine, trans-2-(1-pyrrolidinyl)cyclohexyl-3-pentyloxycarbanilate hydrochloride, in biological samples. After ion pair extraction from 1 M HCl into 1,2-dichloroethane, pentacaine and a structurally related internal standard were derivatized to prevent thermal decomposition in the gas chromatograph. An on-column methylation technique with trimethylanilinium hydroxide was used. Determination was performed by gas chromatography/mass spectrometry (GC/MS) with selected ion monitoring. Interferences by endogenous lipophilic constituents were avoided by including an n-hexane wash before the ion pair extraction. This wash step did not reduce the drug recoveries. The method gave linear results over a concentration range of 5-100 ng ml-1 with a coefficient of variation less than 10% at 5 ng pentacaine ml-1. Specimens of plasma, whole blood, urine as well as in vitro preparations such as hepatic microsomes were successfully analysed.     

Butyltins in sediments and biota from the Pearl River Delta,South China

Abstract

Butyltins in sediments and biota collected from the Pearl River Delta, South China were analyzed by a gas chromatograph–atomic emission detector (GC-AED). The concentrations of tributyltin (TBT) in the sediments ranged from 1.7 to 379.7 ng/g dry weight. Their spatial distribution suggested that shipping activities, especially shipyards were mostly responsible for the TBT contamination in the region. A good linear relationship was observed between the DBT (dibutyltin)/TBT and MBT (monobutyltin) /TBT ratios of the samples in the Pearl River, the Pearl River estuary and the West River, suggesting that TBT in these areas came from similar sources but had undergone a different extent of degradation. The butyltins in the Macao waters seemed to have undergone a different degradation process. All TBT concentrations of the fish, mussel and shrimp samples collected in this study were below the seafood tolerable average residue level (TARL).     

Requirement for the enzymes acetoacetyl coenzyme A synthetase and poly-3-hydroxybutyrate (PHB) synthase for growth of Sinorhizobium meliloti on PHB cycle intermediates

We have identified two Sinorhizobium meliloti chromosomal loci affecting the poly-3-hydroxybutyrate degradation pathway. One locus was identified as the gene acsA, encoding acetoacetyl coenzyme A (acetoacetyl-CoA) synthetase. Analysis of the acsA nucleotide sequence revealed that this gene encodes a putative protein with a molecular weight of 72,000 that shows similarity to acetyl-CoA synthetase in other organisms. Acetyl-CoA synthetase activity was not affected in cell extracts of glucose-grown acsA::Tn5 mutants; instead, acetoacetyl-CoA synthetase activity was drastically reduced. These findings suggest that acetoacetyl-CoA synthetase, rather than CoA transferase, activates acetoacetate to acetoacetyl-CoA in the S. meliloti poly-3-hydroxybutyrate cycle. The second locus was identified as phbC, encoding poly-3-hydroxybutyrate synthase, and was found to be required for synthesis of poly-3-hydroxybutyrate deposits.     

Chirality responsive helical poly(phenylacetylene) bearing L-proline pendants

A novel, optically active, cis-transoidal poly(phenylacetylene) bearing an L-proline residue as the pendant group (poly-1) was prepared by the polymerization of the corresponding monomer using a rhodium catalyst in water, and its chiroptical property was investigated using circular dichroism spectroscopy. Poly-1 showed intense Cotton effects in the UV-visible region of the polymer backbone in water, resulting from the prevailing one-handed helical conformation induced by the covalent-bonded chiral L-proline pendants and exhibited a unique helix-sense inversion in response to external, achiral, and chiral stimuli, such as the solvent and interactions with chiral small molecules. We found that poly-1 could enantioselectively trap 1,1'-2-binaphthol within its hydrophobic helical cavity inside the polymer in aqueous media and underwent an inversion of its helical sense in the presence of one of the enantiomers. The effect of the optical purity of 1,1'-2-binaphthol on the chiroptical properties of poly-1 was also investigated.     

An innovative approach to molecularly imprinted capillaries for polar templates by grafting polymerization

Molecularly imprinted polymers have been successfully used as selective stationary phases in capillary electrophoresis. Notwithstanding, this technique suffers from several drawbacks as the loss of molecular recognition properties in aqueous media and the lack of feasibility for imprinted systems directed towards highly polar templates soluble in aqueous environments only. Thus, the preparation of imprinted polymers for highly polar, water-soluble analytes, represents a challenge. In this work, we present an innovative approach to overcome these drawbacks. It is based on a surface molecular imprinting technique that uses preformed macromonomers as both functional recognition elements and cross-linking agents. A poly-2-hydroxyethyl-co-methacrylic acid linear polymer was grafted from the surface of silica capillaries. The grafted polymer was exhaustively esterified with methacrylic anhydride to obtain polyethylendimethacrylate-co-methacrylic acid linear chains. Then, as a proof of concept, an adequate amount of a very polar template like penicillin V was added in a hydro-organic mixture, and a thin layer of imprinted polymer was obtained by cross-linking the polymer linear chains. The binding behaviour of the imprinted and non-imprinted capillaries was evaluated in different separation conditions in order to assess the presence of template selectivity and molecular recognition effects. The experimental results clearly show that this innovative kind of imprinted material can be easily obtained in very polar polymerization environments and that it is characterized by enhanced molecular recognition properties in aqueous buffers and good selectivity towards the template and strictly related molecules.     

Comparative oxo-biodegradation study of poly-3-hydroxybutyrate-co-3-hydroxyvalerate/polypropylene blend in controlled environments

The potential use of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) copolymer as a biodegradable additive in polypropylene (PP) has been explored. The melt blending technique was used to produce the blend of PHBV/PP (PB10). The degradation studies of PB10 were done in the field as well as in controlled laboratory conditions. The structural changes were studied using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). SEM micrographs showed the formation of agglomerates, pits, grooves, and holes on the treated films as a result of microbial activity. FTIR spectra indicated clear evidences of oxo-biodegradation of polymer chains due to an increase in carbonyl peak index. Thermogravimetric analysis confirmed that the thermal stability of PB10 was increased after soil burial. This study contributed toward the prospective commercial applications of PHBV for use in the food packaging industry.