Gene encoded antimicrobial peptides, a template for the design of novel anti-mycobacterial drugs

Nisin A is the most widely characterized lantibiotic investigated to date. It represents one of the many antimicrobial peptides which have been the focus of much interest as potential therapeutic agents. This has resulted in the search for novel lantibiotics and more commonly, the engineering of novel variants from existing peptides with a view to increasing their activity, stability and solubility.The aim of this study was to compare the activities of nisin A and novel bioengineered hinge derivatives, nisin S, nisin T and nisin V. The microtitre alamar blue assay (MABA) was employed to identify the enhanced activity of these novel variants against M. tuberculosis (H37Ra), M. kansasii (CIT11/06), M. avium subsp. hominissuis (CIT05/03) and M. avium subsp. paratuberculosis (MAP) (ATCC 19698). All variants displayed greater anti-mycobacterial activity than nisin A. Nisin S was the most potent variant against M. tuberculosis, M. kansasii and M. avium subsp. hominissuis, retarding growth by a maximum of 29% when compared with nisin A. Sub-species variations of inhibition were also observed with nisin S reducing growth of Mycobacterium avium subsp. hominissuis by 28% and Mycobacterium avium subsp. paratuberculosis by 19% and nisin T contrastingly reducing growth of MAP by 27% and MAC by 16%.Nisin S, nisin T and nisin V are potent novel anti-mycobacterial compounds, which have the capacity to be further modified, potentially generating compounds with additional beneficial characteristics. This is the first report to demonstrate an enhancement of efficacy by any bioengineered bacteriocin against mycobacteria.     

Use of a bacteriocin produced by Pediococcus acidilactici to inhibit Listeria monocytogenes associated with fresh meat.

A bacteriocin produced by Pediococcus acidilactici had an inhibitory and bactericidal effect on Listeria monocytogenes associated with fresh meat. MICs were significantly lower than minimum killing concentrations. When meat was inoculated with L. monocytogenes, the bacteriocin reduced the number of attached bacteria in 2 min by 0.5 to 2.2 log cycles depending upon bacteriocin concentration. Meat treated initially with the bacteriocin resulted in attachment of 1.0 to 2.5 log cycles fewer bacteria than that attained with the control. The bacteriocin, after 28 days of refrigerated storage on meat surfaces, was stable and exhibited an inhibitory effect on L. monocytogenes.     

The presence of salt and a curing agent reduces bacteriocin production by Lactobacillus sakei CTC 494, a potential starter culture for sausage fermentation

The specific conditions in the batter of raw fermented sausages may reduce the efficiency of bacteriocin-producing starter cultures. In this work, using in vitro fermentation, we found that sodium chloride and sodium nitrite interfere with the growth of Lactobacillus sakei CTC 494, an organism which produces the antilisterial bacteriocin sakacin K. Because sakacin K production follows primary metabolite kinetics, a decrease in cell formation resulted in a decrease in sakacin K production as well. Sodium chloride dramatically influenced bacteriocin production by decreasing both biomass production and specific bacteriocin production. Sodium nitrite, however, had no effect on specific bacteriocin production and decreased bacteriocin production only because of its effect on cell growth. Moreover, sodium nitrite enhanced the toxic effect of lactic acid on bacterial growth.     

The Presence of Salt and a Curing Agent Reduces Bacteriocin Production by Lactobacillus sakei CTC 494, a Potential Starter Culture for Sausage Fermentation

The specific conditions in the batter of raw fermented sausages may reduce the efficiency of bacteriocin-producing starter cultures. In this work, using in vitro fermentation, we found that sodium chloride and sodium nitrite interfere with the growth of Lactobacillus sakei CTC 494, an organism which produces the antilisterial bacteriocin sakacin K. Because sakacin K production follows primary metabolite kinetics, a decrease in cell formation resulted in a decrease in sakacin K production as well. Sodium chloride dramatically influenced bacteriocin production by decreasing both biomass production and specific bacteriocin production. Sodium nitrite, however, had no effect on specific bacteriocin production and decreased bacteriocin production only because of its effect on cell growth. Moreover, sodium nitrite enhanced the toxic effect of lactic acid on bacterial growth.     

Effects of a bacteriocin from Mycobacterium smegmatis on BALB/3T3 and simian virus 40-transformed BALB/c mouse cells

The effects of a bacteriocin from Mycobacterium smegmatis ATCC 14468 on simian virus 40-transformed BALB/c mouse cells (mKS-A TU-7 cells) and nontransformed BALB/3T3 cells originating from the BALB/c mouse strain were studied. The percentage of nigrosin-unstained (viable) cells in the bacteriocin-treated mKS-A TU-7 cells decreased time-dependently with an increase in the bacteriocin activity. There was a time-dependent decrease in the bacteriocin activity after treatment with the cell membrane preparation from mKS-A TU-7 cells. There was no apparent effect of the bacteriocin on the viability of nontransformed BALB/3T3 cells. Wheat germ agglutinin blocked the toxic effect of bacteriocin on mKS-A TU-7 cells. These results indicate that the higher sensitivity and binding capacity of the tumor cells to the bacteriocin is probably due to the presence of a large amount of N-acetyl-glucosamine or closely related sugar residues with a high affinity for bacteriocin, as compared with normal cells. The bacteriocin produced morphological alterations and inhibition of synthesis of ribonucleic acid, deoxyribonucleic acid and protein in the transformed but not in the nontransformed cells.     

Effect of mutacin administration on Streptococcus mutans-induced dental caries in rats

A bacteriocin from serotype c Streptococcus mutans strain C3603 was examined for its inhibitory effect on experimental dental caries in rats infected with S. mutans MT8148R (serotype c). Significant reduction in the incidence of dental caries was found only when bacteriocin was incorporated both in the drinking water and in the diet at a high concentration. However, caries reduction was not as great as expected and the addition of bacteriocin to drinking water alone had no effect on the recovery of S. mutans, plaque deposition or caries incidence. The bacteriocin activity must have been reduced in the oral cavity of rats, and the reasons were examined. Bacteriocin-resistant mutants were not detected and the bacteriocin was not inactivated by saliva. Whereas the bacteriocin did not kill the S. mutans cells grown in a sucrose-containing medium, it completely killed the cells grown in a sucrose-free medium.     

Mode of action of a bacteriocin produced byEnterobacter cloacae DF 13

Enterobacter cloacae DF 13 produces a bacteriocin with killing action onKlebsiella edwardsii var.edwardsii. The degree of sensitivity to the bacteriocin depended on the medium in which the cells were grown and on the bacteriocin concentration used. An excess of bacteriocin (60 K.U./ml) arrested growth in about 60 min. Growth of bacteriocin-treated cultures could be restored by trypsin treatment. In Brain Heart Infusion cultures trypsin rapidly restored bacterial growth even after 60 min of bacteriocin treatment. However, in broth cultures and minimal medium cultures treated with bacteriocin for only 10 min, it took 4 to 5 hr before growth started again. The bacteriocin had little effect on resting cells. Broth-grown cells had about 280 and BHI-grown cells about 340 bacteriocin receptor sites. Bacteriocin DF 13 strongly inhibited protein synthesis after a lag-time of 15 to 60 min depending on the concentration used but had no effect on RNA and DNA synthesis nor on respiration and fermentation. The bacteriocin stimulated RNA synthesis in a leucine-deficient mutant after leucine deprivation.We are grateful to W. Schipper and H. R. de Jonge for assistence in some experiments. The investigations were supported (in part) by the Netherlands Foundation for Chemical Research (SON) with financial aid from the Netherlands Organization for the Advancement of Pure Research (ZWO).     

Detection and activity of a bacteriocin produced by Leuconostoc mesenteroides.

Leuconostoc mesenteroides UL5 was found to produce a bacteriocin, referred as mesenterocin 5, active against Listeria monocytogenes strains but with no effect on several useful lactic acid bacteria. The antimicrobial substance is a protein, since its activity was completely destroyed following protease (pronase) treatment. However, it was relatively heat stable (100 degrees C for 30 min) and partially denaturated by chloroform. The inhibitory effect of the bacteriocin on sensitive bacterial strains was determined by a critical-dilution micromethod. Mutants of L. mesenteroides UL5 which had lost the capacity to produce the bacteriocin were obtained. The mutant strain was stable and phenotypically identical to parental cells and remained resistant to the bacteriocin. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis was used to detect bacteriocin activity corresponding to an apparent molecular mass of about 4.5 kDa.     

Application of a mathematical model and Differential Evolution algorithm approach to optimization of bacteriocin production by Lactococcus lactis C7

The effect of pH and temperature on cell growth and bacteriocin production in Lactococcus lactis C7 was investigated in order to optimize the production of bacteriocin. The study showed that the bacteriocin production was growth-associated, but declined after reaching the maximum titer. The decrease of bacteriocin was caused by a cell-bound protease. Maximum bacteriocin titer was obtained at pH 5.5 and at 22°C. In order to obtain a global optimized solution for production of bacteriocin, the optimal temperature for bacteriocin production was further studied. Mathematical models were developed for cell growth, substrate consumption, lactic acid production and bacteriocin production. A Differential Evolution algorithm was used both to estimate the model parameters from the experimental data and to compute a temperature profile for maximizing the final bacteriocin titer and bacteriocin productivity. This simulation showed that maximum bacteriocin production was obtained at the optimal temperature profile, starting at 30°C and terminating at 22°C, which was validated by experiment. This temperature profile yielded 20% higher maximum bacteriocin productivity than that obtained at a constant temperature of 22°C, although the total amount of bacteriocin obtained was slightly decreased.     

The curing agent sodium nitrite,used in the production of fermented sausages,is less inhibiting to the bacteriocin-producing meat starter culture Lactobacillus curvatus LTH 1174 under anaerobic conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

Influence of complex nutrient source on growth of and curvacin a production by sausage isolate Lactobacillus curvatus LTH 1174

Lactobacillus curvatus LTH 1174, a fermented sausage isolate, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of a complex nutrient source were investigated in vitro during laboratory fermentations with modified MRS medium. A modification of the nutrient depletion model was used to fit the data describing growth and bacteriocin production. Both cell growth and bacteriocin activity were influenced by changes in the complex nutrient source concentration. Standard MRS medium clearly limited the growth of L. curvatus LTH 1174. Higher nutrient concentrations, up to a certain degree, led to improved growth, a higher attainable biomass concentration, and a higher bacteriocin activity in the supernatant. A lower concentration of complex nutrient source caused severe growth inhibition, leading to a lower biomass concentration but a much higher specific bacteriocin production. When examining the separate components of the complex nutrient source, a stimulating effect of bacteriological peptone on growth was found without an adverse effect on bacteriocin production, resulting in increased curvacin A activity. Furthermore, specific depletion of the amino acids tyrosine, serine, and asparagine/aspartic acid was observed for this strain.     

Detection and activity of a bacteriocin produced by Leuconostoc mesenteroides.

Leuconostoc mesenteroides UL5 was found to produce a bacteriocin, referred as mesenterocin 5, active against Listeria monocytogenes strains but with no effect on several useful lactic acid bacteria. The antimicrobial substance is a protein, since its activity was completely destroyed following protease (pronase) treatment. However, it was relatively heat stable (100 degrees C for 30 min) and partially denaturated by chloroform. The inhibitory effect of the bacteriocin on sensitive bacterial strains was determined by a critical-dilution micromethod. Mutants of L. mesenteroides UL5 which had lost the capacity to produce the bacteriocin were obtained. The mutant strain was stable and phenotypically identical to parental cells and remained resistant to the bacteriocin. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis was used to detect bacteriocin activity corresponding to an apparent molecular mass of about 4.5 kDa.     

Production and pH-Dependent Bactericidal Activity of Lactocin S, a Lantibiotic from Lactobacillus sake L45

The amount of lactocin S activity in a growing culture depends on the growth stage of the bacteria, the pH of the medium, the presence of ethanol, and the aeration of the culture. We observed the highest levels of bacteriocin activity in the early stationary growth phase of cultures at 30 deg C. When Lactobacillus sake L45 was grown in a fermentor at pH 5, it produced 2,000 to 3,000 bacteriocin units per ml, which represented an 8- to 10-fold increase in bacteriocin production compared with production during batch culture fermentation. Less than 10% of this level of bacteriocin activity was observed during fermentation at pH 6.0. When 1% ethanol was included in the growth medium, a two- to fourfold increase in the bacteriocin yield was observed. Aerating the culture during growth almost completely eliminated the production of active bacteriocin. Our results also showed that lactocin S-mediated killing of target cells depended on the pH of the culture. The pH had to be less than 6 in order to obtain a bactericidal effect with lactocin S-sensitive cells. At pH values greater than 6, lactocin S had no apparent effect on sensitive cells.     

Properties and Characteristics of a Bacteriocin from Serratia marcescens

A strain of Serratia marcescens was found to produce a bacteriocin that inhibits the growth of certain Escherichia coli strains. This inhibition was bacteriocidal rather than bacteriostatic and was not caused by a bacteriophage. Whereas the bacteriocin was inactive on the 7 Serratia strains tested, it killed 11 of the 20 E. coli strains tested for sensitivity. A relationship of the bacteriocin to a possible colicin cannot as yet be excluded, although E. coli mutants resistant to 1 or 2 of 15 different colicins remained sensitive to the bacteriocin. The bacteriocidal effect by the bacteriocin could be interrupted in a substantial fraction of the treated cell population by the addition of trypsin. The synthesis of the bacteriocin was inducible by ultraviolet light or by starvation for thymidine. Both procedures led to a similar increase in maximum bacteriocin titer relative to noninduced cultures.     

Pseudomonas putida Strain FStm2 Isolated from Shark Skin: A Potential Source of Bacteriocin

Bacteriocin-producing Pseudomonas putida strain FStm2 isolated from shark showed broad range of antibacterial activity against all pathogens tested except Bacillus subtilis ATCC11774, MRSA N32064, Proteus mirabilis ATCC12453, Enterococcus faecalis ATCC14506, Salmonella typhimurium ATCC51312, Salmonella mutan ATCC25175, and Aeromonas hydrophila Wbf314. Of the three growth media tested in this study, TSB was observed to support the bacteriocin activity the most. While the highest bacteriocin activity was observed for media supplemented with 1 % NaCl, there was an observed reduction in bacteriocin activity with increasing salt concentration. Although the least bacteriocin activity was observed for marine broth, addition of increasing amounts of tryptone, glucose, or yeast extract increased bacteriocin activity. This was, however, contrary to the effect observed when MgSO₄ and MnSO₄ were added as supplements. In the presence of α-amylase, lipase, DNase, and RNase, a positive effect on bacteriocin production was observed. Proteinase K strongly inhibited bacteriocin production. Furthermore, the bacteriocins produced were heat stable within the temperature range of 30–70 °C. Bacteriocin activity also was not affected within a wide pH range of 3–9. Exposure to detergents did not inhibit the activity of the bacteriocin at the concentrations tested. Instead, a positive effect on the relative activity of produced bacteriocin was observed as sodium dodecyl sulfate (SDS), EDTA, and Tween 20 at 1 % concentration all improved bacteriocin activity when the cell-free supernatant was tested against Serratia marcescens ATCC 13880. The bacteriocin was purified by ammonium sulfate precipitation and gel filtration on a Superdex-200 column. SDS-PAGE analysis of the partially purified bacteriocin revealed an apparent molecular weight of ~32 kDa.     

The Curing Agent Sodium Nitrite, Used in the Production of Fermented Sausages, Is Less Inhibiting to the Bacteriocin-Producing Meat Starter Culture Lactobacillus curvatus LTH 1174 under Anaerobic Conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

Influence of Complex Nutrient Source on Growth of and Curvacin A Production by Sausage Isolate Lactobacillus curvatus LTH 1174

Lactobacillus curvatus LTH 1174, a fermented sausage isolate, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of a complex nutrient source were investigated in vitro during laboratory fermentations with modified MRS medium. A modification of the nutrient depletion model (Leroy and De Vuyst, Appl. Environ, Microbiol. 67:4470-4473, 2001) was used to fit the data describing growth and bacteriocin production. Both cell growth and bacteriocin activity were influenced by changes in the complex nutrient source concentration. Standard MRS medium clearly limited the growth of L. curvatus LTH 1174. Higher nutrient concentrations, up to a certain degree, led to improved growth, a higher attainable biomass concentration, and a higher bacteriocin activity in the supernatant. A lower concentration of complex nutrient source caused severe growth inhibition, leading to a lower biomass concentration but a much higher specific bacteriocin production. When examining the separate components of the complex nutrient source, a stimulating effect of bacteriological peptone on growth was found without an adverse effect on bacteriocin production, resulting in increased curvacin A activity. Furthermore, specific depletion of the amino acids tyrosine, serine, and asparagine/aspartic acid was observed for this strain.     

Industrial Whey Utilization as a Medium Supplement for Biphasic Growth and Bacteriocin Production by Probiotic Lactobacillus casei LA-1

The ability of probiotic Lactobacillus casei LA-1 for bacteriocin production using industrial by-products, such as whey, as supplement in growth medium has been demonstrated for the first time. Whey was investigated as a sole carbon source in cooperation with other components to substitute expensive nutrients as MRS for economical bacteriocin production. Industrial whey-supplemented MRS medium was then selected as to determine the effect of four variables (temperature, initial pH, incubation time, and whey concentration) by response surface methodology on bacteriocin production. Statistical analysis of results showed that two variables have a significant effect on bacteriocin production. Response surface data showed maximum bacteriocin production of 6,132.33?AU/mL at an initial pH of 7.12, temperature 34.29?°C, and whey concentration 13.74?g/L. The production of bacteriocin started during the exponential growth phase, reaching maximum values at stationary phase, and a biphasic growth and production pattern was observed. Our current work demonstrates that this approach of utilization of whey as substitution in costly medium as MRS has great promise for cost reduction in industry for the production of novel biological metabolic product that can be utilized as a food preservative.     

Symbiotic effectiveness of bacteriocin producing and non-producing strains of Rhizobium in green gram (Vigna radiata)

Rhizobium strains nodulating green gram [Vigna radiata (L.) Wilczek] were found to produce bacteriocin on modified Bergersen's medium and inhibited the growth of homologous Rhizobium strains. Four bacteriocin producing and four bacteriocin non-producing strains were compared for their effect on nodulation, in planta nitrogenase activity and plant dry weight of green gram. The bacteriocin producers formed more nodules in comparison to non-bacteriocin producers. However, the symbiotic effectiveness of bacteriocin producers was less in terms of plant dry weight in comparison to non-bacteriocin producers.     

Sodium chloride reduces production of curvacin A, a bacteriocin produced by Lactobacillus curvatus strain LTH 1174, originating from fermented sausage

Lactobacillus curvatus LTH 1174, a strain originating in fermented sausage, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of salt (sodium chloride) were investigated in vitro during laboratory fermentations using modified MRS medium. A model was set up to describe the effects of different NaCl concentrations on microbial behavior. Both cell growth and bacteriocin activity were affected by changes in the salt concentration. Sodium chloride clearly slowed down the growth of L. curvatus LTH 1174, but more importantly, it had a detrimental effect on specific curvacin A production (k(B)) and hence on overall bacteriocin activity. Even a low salt concentration (2%, wt/vol) decreased bacteriocin production, while growth was unaffected at this concentration. The inhibitory effect of NaCl was mainly due to its role as an a(w)-lowering agent. Further, it was clear that salt interfered with bacteriocin induction. Additionally, when 6% (wt/vol) sodium chloride was added, the minimum biomass concentration necessary to start the production of curvacin A (X(B)) was 0.90 g (cell dry mass) per liter. Addition of the cell-free culture supernatant or a protein solution as a source of induction factor resulted in a decrease in X(B), an increase in k(B), and hence an increase in the maximum attainable bacteriocin activity.