A Screen for Spore Wall Permeability Mutants Identifies a Secreted Protease Required for Proper Spore Wall Assembly

The ascospores of Saccharomyces cerevisiae are surrounded by a complex wall that protects the spores from environmental stresses. The outermost layer of the spore wall is composed of a polymer that contains the cross-linked amino acid dityrosine. This dityrosine layer is important for stress resistance of the spore. This work reports that the dityrosine layer acts as a barrier blocking the diffusion of soluble proteins out of the spore wall into the cytoplasm of the ascus. Diffusion of a fluorescent protein out of the spore wall was used as an assay to screen for mutants affecting spore wall permeability. One of the genes identified in this screen, OSW3 (RRT12/YCR045c), encodes a subtilisin-family protease localized to the spore wall. Mutation of the active site serine of Osw3 results in spores with permeable walls, indicating that the catalytic activity of Osw3 is necessary for proper construction of the dityrosine layer. These results indicate that dityrosine promotes stress resistance by acting as a protective shell around the spore. OSW3 and other OSW genes identified in this screen are strong candidates to encode enzymes involved in assembly of this protective dityrosine coat.     

Chemical composition of the yeast ascospore wall. The second outer layer consists of chitosan

In a preceding paper (Briza, P., Winkler, G., Kalchhauser, H., and Breitenbach, M. (1986) J. Biol. Chem. 261, 4288-4294), we reported the presence of dityrosine in the outer layers of yeast ascospore walls. Both outer layers seen in electron micrographs of yeast ascospore walls are sporulation-specific. Here we show that the second of these two outer layers consists of chitosan. In intact spores, it is shielded from staining with primulin by the outermost layer. However, in purified spore walls, the second layer is brightly stained by primulin, and hydrolysates of such preparations contain about 10% glucosamine relative to spore wall dry weight. The spore wall material staining with primulin is resistant to chitinase, but readily degraded by treatment with HNO2. Acetylation prior to HNO2 treatment completely prevents its degradation. A partial acid hydrolysate of spore walls contains predominantly soluble poly-beta-(1,4)-glucosamine as determined by 13C NMR spectroscopy. By these criteria, the glucosamine polymer of yeast ascospore walls is chitosan. As spore walls treated with alkali lack the inner layers but contain chitosan and as chitosan is not exposed at the surface of the spore, we conclude that it is localized in the second outer layer of the spore wall.     

Dityrosine is a prominent component of the yeast ascospore wall. A proof of its structure

The yeast ascospore wall consists of four morphologically distinct layers. The hydrophobic surface layers are biogenically derived from the prospore wall and appear dark after OsO4 staining. They seem to be responsible for the stability of the spores against attack by lytic enzymes. By amino acid analysis of acid hydrolysates of ascospore walls, two new peaks were detected, which were shown to be the racemic and meso form, respectively, of dityrosine. The identity of this hitherto unknown component of the yeast ascospore wall with standard dityrosine was proven by 1H NMR and by mass spectrometry. A 13C NMR spectroscopic investigation of the structure of dityrosine confirmed that, in natural dityrosine, the biphenyl linkage is located ortho, ortho to the hydroxyl groups. Following digestion of the inner layers of isolated ascospore walls it was shown that dityrosine is very probably located only in the surface layers. The same conclusion was reached independently by an investigation of spores of a strain homozygous for the mutation gcn1, which lack the outermost layers of the spore wall and were practically devoid of dityrosine. In sporulating yeast, L-tyrosine was readily incorporated into the dityrosine of the ascospore wall. Control experiments involving vegetative a/alpha cells and nonsporulating alpha/alpha cells under sporulation conditions showed that dityrosine is indeed sporulation-specific.     

Dtrlp,a multidrug resistance transporter of the major facilitator superfamily,plays an essential role in spore wall maturation in Saccharomyces cerevisiae

The de novo formation of multilayered spore walls inside a diploid mother cell is a major landmark of sporulation in the yeast Saccharomyces cerevisiae. Synthesis of the dityrosine-rich outer spore wall takes place toward the end of this process. Bisformyl dityrosine, the major building block of the spore surface, is synthesized in a multistep process in the cytoplasm of the prospores, transported to the maturing wall, and polymerized into a highly cross-linked macromolecule on the spore surface. Here we present evidence that the sporulation-specific protein Dtr1p (encoded by YBR180w) plays an important role in spore wall synthesis by facilitating the translocation of bisformyl dityrosine through the prospore membrane. DTR1 was identified in a genome-wide screen for spore wall mutants. The null mutant accumulates unusually large amounts of bisformyl dityrosine in the cytoplasm and fails to efficiently incorporate this precursor into the spore surface. As a result, many mutant spores have aberrant surface structures. Dtr1p, a member of the poorly characterized DHA12 (drug:H⁺ antiporter with 12 predicted membrane spans) family, is localized in the prospore membrane throughout spore maturation. Transport by Dtr1p may not be restricted to its natural substrate, bisformyl dityrosine. When expressed in vegetative cells, Dtr1p renders these cells slightly more resistant against unrelated toxic compounds, such as antimalarial drugs and food-grade organic acid preservatives. Dtr1p is the first multidrug resistance protein of the major facilitator superfamily with an assigned physiological role in the yeast cell.     

Time-resolved fluorescence studies of dityrosine in the outer layer of intact yeast ascospores.

The (time-resolved) fluorescence properties of dityrosine in the outermost layer of the spore wall of Saccharomyces cerevisiae were investigated. Steady-state spectra revealed an emission maximum at 404 nm and a corresponding excitation maximum at 326 nm. The relative fluorescence quantum yield decreased with increasing proton concentration. The fluorescence decay of yeast spores was found to be nonexponential and differed pronouncedly from that of unbound dityrosine in water. Analysis of the spore decay recorded at lambda ex = 323 nm and lambda em = 404 nm by an exponential series (ESM) algorithm revealed a bimodal lifetime distribution with maxima centered at tau 1C = 0.5 ns and tau 2C = 2.6 ns. The relative amplitudes of the two distributions are shown to depend on the emission wavelength, indicating contributions from spectrally different dityrosine chromophores. On quenching the spore fluorescence with acrylamide, a downward curvature of the Stern-Volmer plot was obtained. A multitude of chromophores more or less shielded from solvent in the spore wall is proposed to account for the nonlinear quenching of the total spore fluorescence. Analysis of the fluorescence anisotropy decay revealed two rotational correlation times (phi 1 = 0.9 ns and phi 2 = 30.6 ns) or a bimodal distribution of rotational correlation times (centers at 0.7 ns and 40 ns) when the data were analyzed by the maximum entropy method (MEM). We present a model that accounts for the differences between unbound (aqueous) and bound (incorporated in the spore wall) dityrosine fluorescence. The main feature of the photophysical model for yeast spores is the presence of at least two species of dityrosine chromophores differing in their chemical environments. A hypothetical photobiological role of these fluorophores in the spore wall is discussed: the protection of the spore genome from mutagenic UV light.     

A Highly Redundant Gene Network Controls Assembly of the Outer Spore Wall in S. cerevisiae

The spore wall of Saccharomyces cerevisiae is a multilaminar extracellular structure that is formed de novo in the course of sporulation. The outer layers of the spore wall provide spores with resistance to a wide variety of environmental stresses. The major components of the outer spore wall are the polysaccharide chitosan and a polymer formed from the di-amino acid dityrosine. Though the synthesis and export pathways for dityrosine have been described, genes directly involved in dityrosine polymerization and incorporation into the spore wall have not been identified. A synthetic gene array approach to identify new genes involved in outer spore wall synthesis revealed an interconnected network influencing dityrosine assembly. This network is highly redundant both for genes of different activities that compensate for the loss of each other and for related genes of overlapping activity. Several of the genes in this network have paralogs in the yeast genome and deletion of entire paralog sets is sufficient to severely reduce dityrosine fluorescence. Solid-state NMR analysis of partially purified outer spore walls identifies a novel component in spore walls from wild type that is absent in some of the paralog set mutants. Localization of gene products identified in the screen reveals an unexpected role for lipid droplets in outer spore wall formation.     

Applied Usage of Yeast Spores as Chitosan Beads

In this study, we present a nonhazardous biological method of producing chitosan beads using the budding yeast Saccharomyces cerevisiae. Yeast cells cultured under conditions of nutritional starvation cease vegetative growth and instead form spores. The spore wall has a multilaminar structure with the chitosan layer as the second outermost layer. Thus, removal of the outermost dityrosine layer by disruption of the DIT1 gene, which is required for dityrosine synthesis, leads to exposure of the chitosan layer at the spore surface. In this way, spores can be made to resemble chitosan beads. Chitosan has adsorptive features and can be used to remove heavy metals and negatively charged molecules from solution. Consistent with this practical application, we find that spores are capable of adsorbing heavy metals such as Cu²⁺, Cr³⁺, and Cd²⁺, and removal of the dityrosine layer further improves the adsorption. Removal of the chitosan layer decreases the adsorption, indicating that chitosan works as an adsorbent in the spores. Besides heavy metals, spores can also adsorb a negatively charged cholesterol derivative, taurocholic acid. Furthermore, chitosan is amenable to chemical modifications, and, consistent with this property, dit1Δ spores can serve as a carrier for immobilization of enzymes. Given that yeast spores are a natural product, our results demonstrate that they, and especially dit1Δ mutants, can be used as chitosan beads and used for multiple purposes.     

酿酒酵母孢子壁结构及其合成相关基因研究进展

细胞壁是酵母细胞区别于哺乳动物细胞的重要特征结构。酵母细胞壁的结构组成、合成、再生等与酵母自身繁殖及环境胁迫压力密切相关。目前,酵母孢子壁的形成机理、调控过程机制及孢子壁合成相关基因的功能尚未研究清楚。本文以酿酒酵母为例,简要描述酵母孢子壁的形成过程,重点阐述孢子壁甘露糖层、葡聚糖层、壳聚糖层和二酪氨酸层的结构组成及其合成相关基因的国内外研究进展,以期为抗真菌药物的新靶点研究提供参考。     

Ultrastructure of spore development in <Emphasis Type="Italic">Scutellospora heterogama</Emphasis>

The ultrastructural detail of spore development in Scutellospora heterogama is described. Although the main ontogenetic events are similar to those described from light microscopy, the complexity of wall layering is greater when examined at an ultrastructural level. The basic concept of a rigid spore wall enclosing two inner, flexible walls still holds true, but there are additional zones within these three walls distinguishable using electron microscopy, including an inner layer that is involved in the formation of the germination shield. The spore wall has three layers rather than the two reported previously. An outer, thin ornamented layer and an inner, thicker layer are both derived from the hyphal wall and present at all stages of development. These layers differentiate into the outer spore layer visible at the light microscope level. A third inner layer unique to the spore develops during spore swelling and rapidly expands before contracting back to form the second wall layer visible by light microscopy. The two inner flexible walls also are more complex than light microscopy suggests. The close association with the inner flexible walls with germination shield formation consolidates the preferred use of the term ‘germinal walls’ for these structures. A thin electron-dense layer separates the two germinal walls and is the region in which the germination shield forms. The inner germinal wall develops at least two sub-layers, one of which has an appearance similar to that of the expanding layer of the outer spore wall. An electron-dense layer is formed on the inner surface of the inner germinal wall as the germination shield develops, and this forms the wall surrounding the germination shield as well as the germination tube. At maturity, the outer germinal wall develops a thin, striate layer within its substructure.     

PpASCL,the Physcomitrella patens Anther-Specific Chalcone Synthase-Like Enzyme Implicated in Sporopollenin Biosynthesis,Is Needed for Integrity of the Moss Spore Wall and Spore Viability

Sporopollenin is the main constituent of the exine layer of spore and pollen walls. The anther-specific chalcone synthase-like (ASCL) enzyme of Physcomitrella patens, PpASCL, has previously been implicated in the biosynthesis of sporopollenin, the main constituent of exine and perine, the two outermost layers of the moss spore cell wall. We made targeted knockouts of the corresponding gene, PpASCL, and phenotypically characterized ascl sporophytes and spores at different developmental stages. Ascl plants developed normally until late in sporophytic development, when the spores produced were structurally aberrant and inviable. The development of the ascl spore cell wall appeared to be arrested early in microspore development, resulting in small, collapsed spores with altered surface morphology. The typical stratification of the spore cell wall was absent with only an abnormal perine recognisable above an amorphous layer possibly representing remnants of compromised intine and/or exine. Equivalent resistance of the spore walls of ascl mutants and the control strain to acetolysis suggests the presence of chemically inert, defective sporopollenin in the mutants. Anatomical abnormalities of late-stage ascl sporophytes include a persistent large columella and an air space incompletely filled with spores. Our results indicate that the evolutionarily conserved PpASCL gene is needed for proper construction of the spore wall and for normal maturation and viability of moss spores.     

Proteomic analysis of spore wall proteins and identification of two spore wall proteins from Nosema bombycis (Microsporidia)

Microsporidia are fungal-like unicellular eukaryotes which develop as obligate intracellular parasites. They differentiate into resistant spores that are protected by a thick spore wall composed of a glycoprotein-rich outer layer or exospore and a chitin-rich inner layer or endospore. In this study performed on the silkworm pathogen Nosema bombycis, we analyzed the spore wall proteins (SWPs) by proteomic-based approaches, MALDI-TOF MS and LC-MS/MS, and 14 hypothetical spore wall proteins (HSWPs) or peptides were obtained in total. Furthermore, we have examined the SWPs by SDS-PAGE and three main spore wall peptides were detected with molecular weights of 32.7 kDa (SWP32), 30.4 kDa (SWP30), and 25.3 kDa (SWP25), respectively. By N-terminal amino acid residue sequencing, and searching the genomic DNA shotgun database of N. bombycis, the complete ORFs of SWP30 and SWP32 were obtained, which encode for a 278- and a 316-amino acid peptide, respectively. Mouse polyclonal antibodies were raised against SWP30 and SWP32 recombinant proteins produced in Escherichia coli, and the results of indirect immunofluorescence assay (IFA) and immunoelectron microscopy (IEM) analyses indicated SWP30 to be an endosporal protein while SWP32 was shown to be an exosporal protein. Both SWP30 and SWP32 are included in the 14 HSWPs identified by MS, confirming the results of the proteomic-based approaches.     

Changes in Microsporum gypseum Mycelial Wall and Spore Coat Glycoproteins During Sporulation and Spore Germination

Ethylenediamine-soluble glycoproteins were extracted from isolated Microsporum gypseum hyphal walls during sporulation and from spore coats before and after germination. This study was carried out to identify a sporulation-specific cell wall protein that possibly served as a substrate for the alkaline protease which initiated the macroconidial germination of this fungus. Analyses revealed that water-insoluble glycoprotein accounted for 10% of the ungerminated spore coat but only for 4 to 5% of the mycelial wall dry weight. This fraction was modified in its amino acid composition during sporulation, and it decreased in protein content during spore germination. Water-soluble glycoprotein, which accounted for approximately 3 to 3.5% of either the spore coat or mycelial wall dry weight, was of similar amino acid composition from both sources and did not decrease in protein content upon spore germination. The water-insoluble glycoprotein was found to be rich in leucine, aspartic acid, glycine, glutamic acid, and phenylalanine residues. The water-soluble glycoprotein was rich in proline, threonine, glycine, serine, glutamic acid, and alanine.     

Chemical characterization of the regularly arranged surface layers of Clostridium thermosaccharolyticum and Clostridium thermohydrosulfuricum.

Clostridum thermosaccharolyticum and Clostridium thermohydrosulfuricum possess as outermost cell wall layer a tetragonal or hexagonal ordered array of macromolecules. The subunits of the surface layer can be detached from isolated cell walls with urea (8M) or guanidine-HCl (4 to 5 M). Triton X-100, dithiothreitol, ethylenediaminetetracetate, and KCl (3 M) had no visible effect on the regular arrays. Sodium dodecyl sulfate-polyacrylamide electrophroesis showed that, in both organisms, the surface layer is composed of glycoprotein of molecular weight 140,000. The glycoprotein from both microorganisms has a predominantly acidic amino acid composition and an acidic isoelectric point after isoelectric focusing on polyacrylamide gels. The glycocomponent is composed of glucose, galactose, mannose, and rhamnose.     

The fission yeast spore is coated by a proteinaceous surface layer comprising mainly Isp3

The spore is a dormant cell that is resistant to various environmental stresses. As compared with the vegetative cell wall, the spore wall has a more extensive structure that confers resistance on spores. In the fission yeast Schizosaccharomyces pombe, the polysaccharides glucan and chitosan are major components of the spore wall; however, the structure of the spore surface remains unknown. We identify the spore coat protein Isp3/Meu4. The isp3 disruptant is viable and executes meiotic nuclear divisions as efficiently as the wild type, but isp3∆ spores show decreased tolerance to heat, digestive enzymes, and ethanol. Electron microscopy shows that an electron-dense layer is formed at the outermost region of the wild-type spore wall. This layer is not observed in isp3∆ spores. Furthermore, Isp3 is abundantly detected in this layer by immunoelectron microscopy. Thus Isp3 constitutes the spore coat, thereby conferring resistance to various environmental stresses.     

Identification, Characterization, and In Situ Detection of a Fruit-Body-Specific Hydrophobin of Pleurotus ostreatus

Hydrophobins are small (length, about 100 ± 25 amino acids), cysteine-rich, hydrophobic proteins that are present in large amounts in fungal cell walls, where they form part of the outermost layer (rodlet layer); sometimes, they can also be secreted into the medium. Different hydrophobins are associated with different developmental stages of a fungus, and their biological functions include protection of the hyphae against desiccation and attack by either bacterial or fungal parasites, hyphal adherence, and the lowering of surface tension of the culture medium to permit aerial growth of the hyphae. We identified and isolated a hydrophobin (fruit body hydrophobin 1 [Fbh1]) present in fruit bodies but absent in both monokaryotic and dikaryotic mycelia of the edible mushroom Pleurotus ostreatus. In order to study the temporal and spatial expression of the fbh1 gene, we determined the N-terminal amino acid sequence of Fbh1. We also synthesized and cloned the double-stranded cDNA corresponding to the full-length mRNA of Fbh1 to use it as a probe in both Northern blot and in situ hybridization experiments. Fbh1 mRNA is detectable in specific parts of the fruit body, and it is absent in other developmental stages.     

A collagen-like surface glycoprotein is a structural component of the Bacillus anthracis exosporium

Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The exosporium is the outermost integument surrounding the mature spore. Here, we describe the purification and the characterization of an immunodominant protein of the spore surface. This protein was abundant, glycosylated and part of the exosporium. The amino-terminal sequence was determined and the corresponding gene was identified. It encodes a protein of 382 amino acid residues, the central part of which contains a region of GXX motifs presenting similarity to mammalian collagen proteins. Thus, this collagen-like surface protein was named BclA (for Bacillus collagen-like protein of anthracis). BclA was absent from vegetative cells; it was detected only in spores and sporulating cells. A potential promoter, dependent on the sigma factor sigma(K), which is required for a variety of events late in sporulation, was found upstream from the bclA gene. A bclA deletion mutant was constructed and analysed. Electron microscopy studies showed that BclA is a structural component of the filaments covering the outer layer of the exosporium.     

Sorting signals within the Saccharomyces cerevisiae sporulation-specific dityrosine transporter, Dtr1p, C terminus promote Golgi-to-prospore membrane transport

During sporulation in Saccharomyces cerevisiae, the dityrosine transporter Dtr1p, which is required for formation of the outermost layer of the spore wall, is specifically expressed and transported to the prospore membrane, a novel double-lipid-bilayer membrane. Dtr1p consists of 572 amino acids with predicted N- and C-terminal cytoplasmic extensions and 12 transmembrane domains. Dtr1p missing the largest internal cytoplasmic loop was trapped in the endoplasmic reticulum in both mitotically dividing cells and cells induced to sporulate. Deletion of the carboxyl 15 amino acids, but not the N-terminal extension of Dtr1p, resulted in a protein that failed to localize to the prospore membrane and was instead observed in cytoplasmic puncta. The puncta colocalized with a cis-Golgi marker, suggesting that Dtr1p missing the last 15 amino acids was trapped in an early Golgi compartment. Deletion of the C-terminal 10 amino acids resulted in a protein that localized to the prospore membrane with a delay and accumulated in cytoplasmic puncta that partially colocalized with a trans-Golgi marker. Both full-length Dtr1p and Dtr1p missing the last 10 amino acids expressed in vegetative cells localized to the plasma membrane and vacuoles, while Dtr1p deleted for the carboxyl-terminal 15 amino acids was observed only at vacuoles, suggesting that transport to the prospore membrane is mediated by distinct signals from those that specify plasma membrane localization. Transfer-of-function experiments revealed that both the carboxyl transmembrane domain and the C-terminal tail are important for Golgi complex-to-prospore membrane transport.     

Isodityrosine cross-linking mediates insolubilization of cell walls in Chlamydomonas.

Enzymatic removal of the cell wall induces vegetative Chlamydomonas reinhardtii cells to transcribe wall genes and synthesize new hydroxyproline-rich glycoproteins (HRGPs) related to the extensins found in higher plant cell walls. A cDNA expression library made from such induced cells was screened with antibodies to an oligopeptide containing the (SP)x repetitive domains found in Chlamydomonas wall proteins. One of the selected cDNAs encodes an (SP)x-rich polypeptide that also displays a repeated YGG motif. Ascorbate, a peroxidase inhibitor, and tyrosine derivatives were shown to inhibit insolubilization of both the vegetative and zygotic cell walls of Chlamydomonas, suggesting that oxidative cross-linking of tyrosines is occurring. Moreover, insolubilization of both walls was concomitant with a burst in H2O2 production and in extracellular peroxidase activity. Finally, both isodityrosine and dityrosine were found in hydrolysates of the insolubilized vegetative wall layer. We propose that the formation of tyrosine cross-links is essential to Chlamydomonas HRGP insolubilization.     

Basic Fuchsin-Tannic Acid; A One-Solution Stain for Spore Walls in Fungi

Spore walls in fungi are stained with the supernatant obtained by centrifuging at 2000 rev/min for 15 min, equal parts by volume of 10% aqueous tannic acid and 1% aqueous basic fuchsin. Advantages of this technique are: (1) the spore walls show up better than when stained with any other dye; (2) in photomicrographs, the spore walls contrast very well with the cytoplasm; (3) it is performed quickly and easily. A comprehensive review of work done to date by other workers reveals that all of the cell wall stains found in the literature stain the spore walls faintly, or both walls and cytoplasm heavily, or only the cytoplasm.     

The fine structure of mature and germinating chlamydospores of Fusarium oxysporum.

A number of features not described previously has been revealed in electron-microscope studies of mature chlamydospores of Fusarium oxysporum. On the maturation of one isolate, many spores formed a thick matrix-like layer containing electron-dense particles on the exterior surface of the spore wall. In thin sections of mature chlamydospores of the same isolate, cisternae of endoplasmic reticulum surrounding, and in close apposition to, the limiting boundary of the lipid bodies were revealed. The germination of chlamydospores was accompanied by (a) the rapid appearance of polysaccharide deposits and changes in the configuration of some subcellular organelles, (b) the formation of a new wall layer between the plasma membrane and the innermost layer of the spore wall, (c) the rupture of the outermost coats of the spore wall, and (d) the emergence of the germ tube as an extension of the new wall layer.