假丝酵母Candida rugosa产脂肪酶条件的优化

对假丝酵母Candidarugosa产脂肪酶的条件进行了优化.比较实验证明,碳源是影响酶产量的主要因素.其中,糖类使细胞生长良好,但酶产量较低,而脂类是较为适合的碳源.本实验首次发现长链的不饱和脂肪酸酯,三油酸甘油酯是最好的碳源.氮源的影响较小.而添加物的使用是有效提高脂肪酶产量的另一种方法.PVA可促进碳源的乳化,从而提高脂肪酶产量.吐温虽没有促进细胞生长,但却大幅度提高了酶的产量.将以上优化的结果应用于发酵罐中,分批流加操作时,脂肪酶产量高达每毫升128.2单位,为目前报道的最高值.     

Mixed-feed exponential feeding for fed-batch culture of recombinant methylotrophic yeast

A simple, accurate model capable of predicting cell growth and methanol utilization during the mixed substrate fed-batch fermentation of Mut^S recombinant Pichia pastoris was developed and was used to design an exponential feeding strategy for mixed substrate fed-batch fermentation at a constant specific growth rate. Mixed substrate feeding has been shown to boost productivity in recombinant fed-batch culture of P. pastoris, while fixed growth rate exponential feeding during fed-batch culture is a useful tool in process optimization and control.     

Enhanced truncated-t-PA (CT-b) expression in high-cell-density fed-batch cultures of <Emphasis Type="Italic">Pichia pastoris</Emphasis> through optimization of a mixed feeding strategy by response surface methodology

Recently, Pichia pastoris has been the focal point of interest as an expression system for production of many recombinant proteins. The study and optimization of feeding strategy are of major importance to achieve maximum volumetric productivity in fed-batch cultivations. Among different feeding strategies used in P. pastoris fed-batch cultures, those trying to maintain a constant specific growth rate have usually resulted in superior productivities. The objective of the present study was to investigate and optimize the co-feeding of glycerol and methanol to attain maximum expression of t-PA in P. pastoris fed-batch cultures with constant specific growth rate. The experiments were designed by response surface methodology, considering the specific feeding rates of methanol and glycerol as independent variables. In each experiment, glycerol and methanol were fed according to a predetermined equation to maintain a constant specific growth rate. It was found that with glycerol feeding for higher specific growth rates, the inhibitory properties of glycerol are more pronounced, while the best expression level was achieved when the ratio of µ _set glycerol to that of methanol was around 1.67. In all specific growth rates tested, almost a similar ratio of the specific glycerol feeding rate to that of methanol led to the maximum protein production and activity. The statistical model predicted the optimal operating conditions for µ _set glycerol and that of methanol to be 0.05 and 0.03 h^?1, respectively. Applying the optimum strategy, maximum of 52 g/L biomass, 300 mg/L t-PA and 340,000 IU/mL enzyme activity were obtained.     

Lipase-catalysed hydrolysis of short-chain substrates in solution and in emulsion: a kinetic study.

We have studied the enzymatic hydrolysis of solutions and emulsions of vinyl propionate, vinyl butyrate and tripropionin by lipases of various origin and specificity. Kinetic studies of the hydrolysis of short-chain substrates by microbial triacylglycerol lipases from Rhizopus oryzae, Mucor miehei, Candida rugosa, Candida antarctica A and by (phospho)lipase from guinea-pig pancreas show that these lipolytic enzymes follow the Michaelis-Menten model. Surprisingly, the activity against solutions of tripropionin and vinyl esters ranges from 70% to 90% of that determined against emulsions. In contrast, a non-hyperbolic (sigmoidal) dependence of enzyme activity on ester concentration is found with human pancreatic lipase, triacylglycerol lipase from Humicola lanuginosa (Thermomyces lanuginosa) and partial acylglycerol lipase from Penicillium camembertii and the same substrates. In all cases, no abrupt jump in activity (interfacial activation) is observed at substrate concentration corresponding to the solubility limit of the esters. Maximal lipolytic activity is always obtained in the presence of emulsified ester. Despite progress in the understanding of structure-function of lipases, interpretation of the mode of action of lipases active against solutions of short-chain substrates remains difficult. Actually, it is not known whether these enzymes, which possess a lid structure, are in open or/and closed conformation in the bulk phase and whether the opening of the lid that gives access to the catalytic triad is triggered by interaction of the enzyme molecule with monomeric substrates or/and multimolecular aggregates (micelles) both present in the bulk phase. From the comparison of the behaviour of lipases used in this study which, in some cases, follow the Michaelis-Menten model and, in others, deviate from classical kinetics, it appears that the activity of classical lipases against soluble short-chain vinyl esters and tripropionin depends not only on specific interaction with single substrate molecules at the catalytic site of the enzyme but also on physico-chemical parameters related to the state of association of the substrate dispersed in the aqueous phase. It is assumed that the interaction of lipase with soluble multimolecular aggregates of tripropionin or short-chain vinyl esters or the formation of enzyme-substrate mixed micelles with ester bound to lipase, might represent a crucial step that triggers the structural transition to the open enzyme conformation by displacement of the lid.     

Enzymatic resolution to (-)-ormeloxifene intermediates from their racemates using immobilized Candida rugosa lipase

In the synthesis of (-)-ormeloxifene, a drug candidate recently under development, enzymatic resolution of potential intermediates can be carried out using a simple, practical method. Five commercially available lipases, Candida rugosa lipase, Candida antarctica lipase B, Mucor miehei lipase, Pseudomonas cepacia lipase, and Humicola lanuginosa lipase, all immobilized on Accurel(R), were initially screened in combination with four different substrates belonging to the class of phenyl esters. Excellent stereoselectivity was observed using C. rugosa lipase with an acetate as substrate, but low reaction rates were observed in scale-up experiments. However, by changing the acyl part of the ester into a hexanoyl moiety and subjecting this substrate to enzymatic hydrolysis in aqueous acetonitrile at room temperature by C. rugosa lipase, it became possible to run the reaction to a 50% conversion on a 10 g scale within a period of 4 h, obtaining a phenolic product of more than 95% ee that could be converted to the target molecule, (-)-ormeloxifene, in two synthetic steps. Simple recovery of the immobilized enzyme by filtration allowed multiple recycling of the catalyst without significant loss of enzymatic activity. Capillary electrophoresis with sulfobutyl ether beta-cyclodextrin as a chiral buffer additive and acetonitrile as an organic modifier was demonstrated to provide an excellent chiral analytical tool for monitoring the enzymatic reactions.     

Lipase-catalysed hydrolysis of short-chain substrates in solution and in emulsion: a kinetic study

We have studied the enzymatic hydrolysis of solutions and emulsions of vinyl propionate, vinyl butyrate and tripropionin by lipases of various origin and specificity. Kinetic studies of the hydrolysis of short-chain substrates by microbial triacylglycerol lipases from Rhizopus oryzae, Mucor miehei, Candida rugosa, Candida antarctica A and by (phospho)lipase from guinea-pig pancreas show that these lipolytic enzymes follow the Michaelis–Menten model. Surprisingly, the activity against solutions of tripropionin and vinyl esters ranges from 70% to 90% of that determined against emulsions. In contrast, a non-hyperbolic (sigmoidal) dependence of enzyme activity on ester concentration is found with human pancreatic lipase, triacylglycerol lipase from Humicola lanuginosa (Thermomyces lanuginosa) and partial acylglycerol lipase from Penicillium camembertii and the same substrates. In all cases, no abrupt jump in activity (interfacial activation) is observed at substrate concentration corresponding to the solubility limit of the esters. Maximal lipolytic activity is always obtained in the presence of emulsified ester. Despite progress in the understanding of structure–function of lipases, interpretation of the mode of action of lipases active against solutions of short-chain substrates remains difficult. Actually, it is not known whether these enzymes, which possess a lid structure, are in open or/and closed conformation in the bulk phase and whether the opening of the lid that gives access to the catalytic triad is triggered by interaction of the enzyme molecule with monomeric substrates or/and multimolecular aggregates (micelles) both present in the bulk phase. From the comparison of the behaviour of lipases used in this study which, in some cases, follow the Michaelis–Menten model and, in others, deviate from classical kinetics, it appears that the activity of classical lipases against soluble short-chain vinyl esters and tripropionin depends not only on specific interaction with single substrate molecules at the catalytic site of the enzyme but also on physico-chemical parameters related to the state of association of the substrate dispersed in the aqueous phase. It is assumed that the interaction of lipase with soluble multimolecular aggregates of tripropionin or short-chain vinyl esters or the formation of enzyme–substrate mixed micelles with ester bound to lipase, might represent a crucial step that triggers the structural transition to the open enzyme conformation by displacement of the lid.     

Structural insights into the lipase/esterase behavior in the Candida rugosa lipases family: crystal structure of the lipase 2 isoenzyme at 1.97A resolution

The yeast Candida rugosa produces several closely related extracellular lipases that differ in their substrate specificity. Here, we report the crystal structure of the isoenzyme lipase 2 at 1.97A resolution in its closed conformation. Lipase 2 shows a 79.4% amino acid sequence identity with lipase 1 and 82.2% with lipase 3, which makes it relevant to compare these three isoenzymes. Despite this high level of sequence identity, structural comparisons reveal several amino acid changes affecting the flap (residue 69), the substrate-binding pocket (residues 127, 132 and 450) and the mouth of the hydrophobic tunnel (residues 296 and 344), which may be responsible for the different substrate specificity and catalytic properties of this group of enzymes. Also, these comparisons reveal two distinct regions in the hydrophobic tunnel: a phenylalanyl-rich region and an aliphatic-rich region. Whereas this last region is essentially identical in the three isoenzymes, the phenylalanyl content in the first one is specific for each lipase, resulting in a different environment of the catalytic triad residues, which probably tunes finely their lipase/esterase character. The greater structural similarity observed between the monomeric form of lipase 3 and lipase 2 concerning the above-mentioned key residues led us to propose a significant esterase activity for this last protein. This enzymatic activity has been confirmed with biochemical experiments using cholesteryl [1-14C]oleate as substrate. Surprisingly, lipase 2 is a more efficient esterase than lipase 3, showing a twofold specific activity against cholesteryl [1-14C]oleate in our experimental conditions. These results show that subtle amino acid changes within a highly conserved protein fold may produce protein variants endowed with new enzymatic properties.     

Sequence of the lid affects activity and specificity of Candida rugosa lipase isoenzymes

The fungus Candida rugosa produces multiple lipase isoenzymes (CRLs) with distinct differences in substrate specificity, in particular with regard to selectivity toward the fatty acyl chain length. Moreover, isoform CRL3 displays high activity towards cholesterol esters. Lipase isoenzymes share over 80% sequence identity but diverge in the sequence of the lid, a mobile loop that modulates access to the active site. In the active enzyme conformation, the open lid participates in the substrate-binding site and contributes to substrate recognition. To address the role of the lid in CRL activity and specificity, we substituted the lid sequences from isoenzymes CRL3 and CRL4 in recombinant rCRL1, thus obtaining enzymes differing only in this stretch of residues. Swapping the CRL3 lid was sufficient to confer to CRL1 cholesterol esterase activity. On the other hand, a specific shift in the chain-length specificity was not observed. Chimeric proteins displayed different sensitivity to detergents in the reaction medium.     

Sorbitol co-feeding reduces metabolic burden caused by the overexpression of a Rhizopus oryzae lipase in Pichia pastoris

To improve the specific production rate of Rhizopus oryzae lipase (ROL) in Pichia pastoris, a protein that triggers the unfolded protein response in P. pastoris, the effect of sorbitol/methanol mixed substrates was tested in batch and fed-batch cultures. Remarkably, a different substrate consumption behaviour was observed depending on the host's phenotype (Mut(+) or Mut(s)) in batch cultures: when the methanol assimilation capacity is genetically reduced (Mut(s) phenotype), both substrates were consumed simultaneously, allowing not only a higher specific growth rate but also higher lipase levels (8.7-fold) compared to those obtained by cells growing on methanol as a sole carbon source in batch culture. This effect was not observed in Mut(+) phenotype, where the two substrates were consumed sequentially and the levels of heterologous product were only slightly higher (1.7-fold). A mixed substrate strategy was also applied to a Mut(s) fed-batch culture at a low methanol concentration set-point (0.5 gl(-1)). This resulted in a 2.2-fold increase in the heterologous protein level achieved, compared with the methanol-only feeding strategy. In addition, sorbitol co-feeding permitted the achievement of higher specific growth rates, and avoided the drastic decrease of the specific production rate observed after the start of the induction phase when methanol was used as sole carbon source This resulted in a significant increase in the overall bioprocess volumetric productivity (2.2-fold) and specific productivity (1.7-fold). Moreover, whereas increased ROL gene dosage in Mut(s) strains have been previously reported to be deleterious for P. pastoris cells growing on methanol, sorbitol co-feeding allowed for sustained cell growth and lipase production.     

Purification and characterization of Lip2 and Lip3 isoenzymes from a Candida rugosa pilot-plant scale fed-batch fermentation

Previous purification of a crude extracellular enzyme preparation from Candida rugosa ATCC 14830 pilot-plant fed-batch fermentations showed the presence of two lipase isoenzymes, Lip2 and Lip3, differing in their molecular masses (58 and 62 kDa, respectively). These enzymes were purified but the lipases were forming active aggregates with a molecular mass higher than 200 kDa. In this work we developed a purification method following three steps: ammonium sulfate precipitation, sodium cholate treatment and ethanol/ether precipitation, and anion exchange chromatography which allowed the sequential disaggregation of the isoenzymes. Pure and monomeric Lip2 and Lip3 were characterized according to pI, glycosylation and activity for p-nitrophenol esters and triacylglycerols of varying acyl chain. Lip3 was the best catalyst for the hydrolysis of the simple esters and triacylglycerols with short and medium acyl chains.     

A model-based feeding strategy for fed-batch fermentation of recombinant Pichia pastoris

A two stage, exponential feeding strategy with mixed glycerol/methanol substrate was used in a fed-batch recombinant Pichia pastorisfermentation. The feeding strategy was developed using a simple model based on mass balances, Monod-type growth kinetics, and constant specific heterologous protein production rate. The model accurately predicted cell growth, and demonstrated the usefulness of a rational, model-based approach for improving the productivity of recombinant P. pastoris fermentation.     

A robust fed-batch feeding strategy independent of the carbon source for optimal polyhydroxybutyrate production

A three-stage control strategy independent of the organic substrate was developed for automated substrate feeding in a two-phase fed-batch culture of Cupriavidus necator DSM 545 for the production of the biopolymer polyhydroxybutyrate (PHB). The optimal feeding strategy was determined using glucose as the substrate. A combined substrate feeding strategy consisting of exponential feeding and a novel method based on alkali-addition monitoring resulted in a maximal cell concentration in the biomass growth phase. In the PHB accumulation phase, a constant substrate feeding strategy based on the estimated amount of biomass produced in the first phase and a specific PHB accumulation rate was implemented to induce PHB under limiting nitrogen at different biomass concentrations. Maximal cell and PHB concentrations of 164 and 125 g/L were obtained when nitrogen feeding was stopped at 56 g/L of residual biomass; the glucose concentration was maintained within its optimal range. The developed feeding strategy was validated using waste glycerol as the sole carbon source for PHB production, and the three-stage control strategy resulted in a PHB concentration of 65.6 g/L and PHB content of 62.7% while keeping the glycerol concentration constant. It can thus be concluded that the developed feeding strategy is sensitive, robust, inexpensive, and applicable to fed-batch culture for PHB production independent of the carbon source.     

Physiological regulation and optimization of lipase activity in Pseudomonas aeruginosa EF2.

Physiological regulation of extracellular lipase activity by a newly-isolated, thermotolerant strain of Pseudomonas aeruginosa (strain EF2) was investigated by growing the organism under various conditions in batch, fed-batch and continuous culture. Lipase activity, measured as the rate of olive oil (predominantly triolein) hydrolysis, was weakly induced by general carbon and/or energy limitation, strongly induced by a wide range of fatty acyl esters including triglycerides, Spans and Tweens, and repressed by long-chain fatty acids including oleic acid. The highest lipase activities were observed during the stationary phase of batch cultures grown on Tween 80, and with Tween 80-limited fed-batch and continuous cultures grown at low specific growth rates. The lipase activity of Tween 80-limited continuous cultures was optimized with respect to pH and temperature using response surface analysis; maximum activity occurred during growth at pH 6.5, 35.5 degrees C, at a dilution rate of 0.04 h-1. Under these conditions the culture exhibited a lipase activity of 39 LU (mg cells)-1 and a specific rate of lipase production (qLipase) of 1.56 LU (mg cells)-1 h-1 (1 LU equalled 1 mumol fatty acid released min-1). Esterase activity, measured with p-nitrophenyl acetate as substrate, varied approximately in parallel with lipase activity under all growth conditions, suggesting that a single enzyme may catalyse both activities.     

Selection of orlistat as a potential inhibitor for lipase from Candida species

Infections caused by Candida species manifest in a number of diseases, including candidemia, vulvovaginal candidiasis, endocarditis, and peritonitis. Candida species have been reported to possess lipolytic activity due to the secretion of lipolytic enzymes such as esterases, lipases and phospholipases. Extra-cellular hydrolytic enzymes seem to play an important role in Candida overgrowth. Candidiasis is commonly treated with antimycotics such as clotrimazole and nystatin. The antimycotics bind to a major component of the fungal cell membrane (ergosterol), forming pores that lead to death of the fungus. However, the secondary effects caused during such treatment have aroused a need to develop a treatment based on lipase inhibition. Nonetheless, no such lipase inhibitors for candidiasis treatment are currently available. Thus, we have performed a docking study with the natural inhibitor, orlistat or tetrahydrolipstatin. Our results have shown ten possible binding inhibitors to Candida rugosa lipase (CRL), out of which one possibility was selected, based on the weakest interatomic distance of 2.7 ?. Therefore, we propose the selection and design of a potential inhibitor candidate, orlistat for the treatment of candidiasis infections. However, this study has to be supported with in vitro and in vivo experiments to demonstrate the effectiveness of orlistat in lipase inhibition.     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

A pseudo-exponential feeding method for control of specific growth rate in fed-batch cultures

A simple feeding method for controlling specific growth rate in fed-batch culture was developed. This method applies a constant feed rate using a concentrate reservoir and two mixing chambers in series to simulate the exponential feeding. Fed-batch cultures with Escherichia coli showed that the present feeding method could sustain the cells growing at predetermined specific growth rates, where the time length for exponential growth was dependent on the magnitude of the growth rate. The present feeding method is convenient to operate, requires no computerized control equipments, and thus could expect an extensive application in fed-batch culture.     

A simple feedback control of Escherichia coli growth for recombinant aldolase production in fed-batch mode

Fed-batch production of recombinant fuculose-1-phosphate aldolase (FucA) by Escherichia coli XL1 Blue MRF′ (pTrcfuc) has been automated by using a simple feedback specific growth rate control strategy. Non-induced continuous cultures were conducted in order to characterize substrate consumption and carbon dioxide production yields and rates. In fed-batch cultures, substrate feeding rate was adjusted using on-line biomass estimation based on exhaust gas analysis and macroscopic mass balances. Overexpression of recombinant protein induced by isopropyl-β-d-thiogalactopyranoside (IPTG) under trc promoter did not affect significantly the control of specific growth rate during 7 h after induction. Growth and protein production curves were parallel until high level of protein expression started to inhibit cell growth. The proposed specific growth rate control strategy has been successfully applied to both non-induced and induced fed-batch cultures that do not exhibit severe growth rate depression.     

微水——有机溶剂两相体系中消旋萘普生的酶法拆分

研究了微水－有机溶剂两相体系中固定化脂肪酶催化的萘甲酯的立体选择性水解反应,固定化酶活性受载体极性、水含量、有机溶剂的ｌｏｇＰ值,产物抑制的影响,据此构建了一种可以连续拆分产生（Ｓ）－（＋）－萘普生的微水－有机溶剂两相体系。反应在一个具有回路的连续流搅拌反应器中进行,反应器中添加有采用吸附法固定化的脂肪酶,截体为一种弱极性的合成载体,水相连同固定化酶颗粒一起永久保持在反应器中,有机流动相带入底物,     

Enantioselective esterification of 2-arylpropionic acids and trans-2-phenyl-1-cyclohexanol: Comparison between immobilised lipases from Candida rugosa and Rhizomucor miehei

2-Phenyl propionic acid, ibuprofen and trans-2-phenyl-1-cyclohexanol were resolved using commercial Rhizomucor miehei lipase (Lipozyme IM20) and Candida rugosa lipase produced in our laboratory immobilised on EP100 polypropylene powder. Important differences were found on the enantioselectivity of both lipases in esterification reactions. Candida rugosa lipase was more enantioselective in the resolution of the tested substrates, especially with trans-2-phenyl-1-cyclohexanol, whereas the lipase from Rhizomucor miehei did not show catalytic activity with this substrate. © Rapid Science Ltd. 1998     

Reactivity of pure Candida rugosa lipase isoenzymes (Lip1, Lip2, and Lip3) in aqueous and organic media. influence of the isoenzymatic profile on the lipase performance in organic media

Three pure isoenzymes from Candida rugosa lipase (CRL: Lip1, Lip2, and Lip3) were compared in terms of their stability and reactivity in both aqueous and organic media. The combined effect of temperature and pH on their stability was studied applying a factorial design. The analysis of the response surfaces indicated that Lip1 and Lip3 have a similar stability, lower than that of Lip2. In aqueous media, Lip3 was the most active enzyme on the hydrolysis of p-nitrophenyl esters, whereas Lip1 showed the highest activity on the hydrolysis of most assayed triacylglycerides. The highest differences among isoenzymes were found in the hydrolysis of triacylglycerides. Thus, a short, medium, and long acyl chain triacylglyceride was the preferred substrate for Lip3, Lip1, and Lip2, respectively. In organic medium, Lip3 and Lip1 provided excellent results in terms of enantioselectivity in the resolution of ibuprofen (EF value over 0.90) and conversion, whereas initial esterification rate was higher for Lip3. However, the use of Lip2 resulted in lower values of conversion, enantiomeric excess, and enantioselectivity. In the case of trans-2-phenyl-1-cyclohexanol (TPCH) resolution, initial esterification rates were high except for Lip3, which also produced poor results in conversion and enantiomeric excess. The performance of the pure isoenzymes in the enantioselectivity esterification of these substrates was compared with different CRL crude preparations with known isoenzymatic content and the different results could not be explained by their isoenzymatic profile. Therefore, it can be concluded that other factors can also affect the catalysis of CRL and only the reproducibility between powders can ensure the reproducibility in synthesis reactions.