Crystallization and a 5 A X-ray diffraction study of Aphanothece sacrum ferredoxin.

A chloroplast-type ferredoxin containing two non-heme iron and two labile sulfur atoms per molecule was prepared from Aphanothece sacrum. Crystals were obtained by dialysis against 75% saturated a-monium sulfate solution, and belong to the tetragonal system with cell dimensions a = b = 92.2 A and c = 47.6 A, containing four molecules in an asymmetric unit. The electron density map at 5 A resolution was calculated by using the best phase angles determined by the single isomorphous replacement method coupled with the anomalous dispersion effect. An anomalous dispersion difference Fourier map for the native crystal clearly showed four humps corresponding to the iron atoms in an asymmetric unit. The electron densis surface.     

Fibrinogen structure in projection at 18 A resolution. Electron density by co-ordinated cryo-electron microscopy and X-ray crystallography

Electron microscope images of frozen-hydrated crystals of a proteolytically modified fibrinogen show excellent preservation of the structure. An electron density map of the key centric projection of the crystal at 18 A resolution has been obtained by combining the phases derived from cryo-electron microscopy with X-ray amplitudes. Simulation methods developed in earlier studies have been used to interpret the map. In contrast to the earlier images, the map allows us to visualize the coiled-coil region of the molecule and possible substructure in the beta domains. The map also shows that there is a marked difference in density in the two regions corresponding to the molecular ends where the gamma domains interact. A possible interpretation of this finding is provided by assuming substructure in the gamma domains and the breaking of molecular symmetry where these domains interact. Some additional constraints useful for the determination of the three-dimensional structure were obtained from cryo-electron micrographs of a perpendicular view at 25 A resolution. Implications of this working model for the molecular length and contacts in the filaments in both the crystal and fibrin are described. The data used here will be valuable as a starting point for obtaining the three-dimensional structure.     

Low resolution crystal structures of Taka-amylase A and its complexes with inhibitors.

The molecular structure of Taka-amylase A, an alpha-amylase from Aspergillus oryzae, has been studied at 6 A resolution by X-ray diffraction analysis. The electron density map showed a non-crystallographic three-fold screw arrangement of the molecules in the crystal. The molecule is an ellipsoid with approximate dimensions of 80 x 45 x 35 A and contains a hollow which may correspond to the active center. The inhibitor molecules bind to Taka-amylase A at four different sites, one of which is located in the hollow of the enzyme. The probable position of a thiol group is discussed in connection with heavy atom binding.     

Structure of CaATPase: electron microscopy of frozen-hydrated crystals at 6 A resolution in projection

Thin, three-dimensional crystals of CaATPase have been studied at high resolution by electron crystallography. These crystals were grown by adding purified CaATPase to appropriate concentrations of lipid, detergent and calcium. A thin film of crystals was then rapidly frozen and maintained in the frozen-hydrated state during electron microscopy. The resulting electron diffraction patterns extend to 4.1 A resolution and images contain phase data to 6 A resolution. By combining Fourier amplitudes from electron diffraction patterns with phases from images, a density map has been calculated in projection. Comparison of this map from unstained crystals with a previously determined map from negatively stained crystals reveals distinct contributions from intramembranous and extramembranous protein domains. On the basis of this distinction and of the packing of molecules in the crystal, we have proposed a specific arrangement for the ten alpha-helices that have been suggested as spanning the bilayer.     

Structure of yeast hexokinase. II. A 6 angstrom resolution electron density map showing molecular shape and heterologous interaction of subunits

An electron density map of yeast hexokinase has been calculated at 6 Å resolution using six heavy atom derivatives. The map shows each of the enzyme's two 51,000 molecular weight subunits to consist of two separate lobes connected by a narrow bridge of density. Furthermore, these two subunits are related to each other in the asymmetric unit of the crystal by a quasi-2-fold rather than a true 2-fold axis. That is, they are related by a rotation of 180 ° plus a relative translation of 3.6 Å along the symmetry axis. This gives rise to a heterologous subunit interaction and a possibility of non-identical structure and function for these chemically identical subunits. The molecule is quite asymmetric, having dimensions of 150 Å × 45 Å × 55 Å. Each subunit is about 80 Å × 40 Å × 50 Å.A portion of an electron density map at 3 Å resolution has been also calculated, based on phases from two heavy atom derivatives. Polypeptide backbone and side chains are visible in this map.     

Crystal structure of the trigonal form of bovine beta-lactoglobulin and of its complex with retinol at 2.5 A resolution

The structure of the trigonal crystal form of bovine beta-lactoglobulin has been determined by X-ray diffraction methods. An electron density map, calculated with phases obtained by the multiple isomorphous replacement method, served as a starting point for alternate cycles of model building and restrained least-squares refinement. The model of the molecule fitted to the initial Fourier map was the one built for the orthorhombic crystal form of beta-lactoglobulin, solved at 2.8 A resolution (1 A = 0.1 nm). The final R factor for 1456 atoms (1276 non-hydrogen protein atoms and 180 solvent atoms) is 0.22, including 5245 reflections from 6.0 to 2.5 A. The molecule shows significant differences in the two crystal forms mentioned, mainly due to different packing. In the trigonal form, the species crystallized does not appear to be dimeric, but a linear polymer with tight intermolecular contacts. A difference electron density map between the complex of beta-lactoglobulin with retinol and the native protein shows no significant peaks in the cavity which, in the similar retinol-binding protein, binds the chromophore. Instead, differences are found at a surface pocket, which is limited almost completely by hydrophobic residues.     

X-ray analysis of the disk of tobacco mosaic virus protein. 3. A low resolution electron density map

The structure of the disk of tobacco mosaic virus protein at low resolution has been determined by X-ray crystal analysis. Signs for the three principal projections were found by isomorphous replacement, using a mercury derivative. The heavy-atom positions were located by interpretation of difference Patterson maps on the basis of the non-crystallographic 17-fold rotational symmetry of the disk, and of the packing of the disks determined in the preceding paper (Finch et al., 1974).The electron density in the corresponding three projections was computed to a resolution of 6 Å. From the projections in the [100] and [010] directions, which are at right-angles to the 17-fold rotation axis, a three-dimensional electron density map has been calculated making use of the non-crystallographic symmetry. The procedure is similar to the three-dimensional image reconstruction technique used in electron microscopy.The map indicates that the subunits in the two rings face the same way and, hence, that the disk is polar. There are differences between the subunits in the two rings at high radius, which are presumably a consequence of the pairing interaction responsible for stabilizing the two-layer polar structure. The map has been compared with a low-resolution map of the intact virus, and certain common features can be identified, notably the site of the nucleic acid.     

Monovalent cation binding to cubic insulin crystals.

Two localized monovalent cation binding sites have been identified in cubic insulin from 2.8 A-resolution difference electron density maps comparing crystals in which the Na+ ions have been replaced by Tl+. One cation is buried in a closed cavity between insulin dimers and is stabilized by interaction with protein carbonyl dipoles in two juxtaposed alternate positions related by the crystal dyad. The second cation binding site, which also involves ligation with carbonyl dipoles, is competitively occupied by one position of two alternate His B10 side chain conformations. The cation occupancy in both sites depends on the net charge on the protein which was varied by equilibrating crystals in the pH range 7-10. Detailed structures of the cation binding sites were inferred from the refined 2-A resolution map of the sodium-insulin crystal at pH 9. At pH 9, the localized monovalent cations account for less than one of the three to four positive counterion charges necessary to neutralize the negative charge on each protein molecule. The majority of the monovalent counterions are too mobile to show up in the electron density maps calculated using data only at resolution higher than 10 A. Monovalent cations of ionic radius less than 1.5 A are required for crystal stability. Replacing Na+ with Cs+, Mg++, Ca++ or La+++ disrupts the lattice order, but crystals at pH 9 with 0.1 M Li+, K+, NH4+, Rb+ or Tl+ diffract to at least 2.8 A resolution.     

The three-dimensional structure of bovine rhodopsin determined by electron cryomicroscopy

G-protein-coupled receptors are integral membrane proteins that respond to environmental signals and initiate signal transduction pathways, which activate cellular processes. Rhodopsin, a well known member of the G-protein-coupled receptor family, is located in the disk membranes of the rod outer segment, where it is responsible for the visualization of dim light. Rhodopsin is the most extensively studied G-protein-coupled receptor, and knowledge about its structure serves as a template for other related receptors. We have gained detailed structural knowledge from the crystal structure (1), which was solved by x-ray crystallography in 2000 using three-dimensional crystals. Here we report a three-dimensional density map of bovine rhodopsin determined by electron cryomicroscopy of two-dimensional crystals with p22(1)2(1) symmetry. The usage of relatively small and disordered crystals made the process of structure determination challenging. Special attention was paid to the extraction of amplitudes and phases, since usable raw data were limited to a maximum tilt of 45 degrees. In the refinement process, an improved unbending procedure was applied. This led to a final resolution of 5.5 A in the membrane plane and approximately 13 A perpendicular to it, making our electron density map the most accurate map of a G-protein-coupled receptor currently available by electron microscopy. Most important is the information we gain about the center of the membrane plane and the orientation of the molecule relative to the bilayer. This information cannot be retrieved from the three-dimensional crystals. In our electron density map, all seven transmembrane helices were identified, and their arrangement is in agreement with the arrangement known from the crystal structure (1). In the retinal binding pocket, a density peak adjacent to helix 3 suggests the position of the beta-ionine ring of the chromophore, and in its vicinity several of the bigger amino acids can be identified.     

Structural changes within unit cell subunits in crosslinked alpha-chymotrypsin crystals.

The structural effects of bifunctional and polyfunctional protein crosslinking agents on protein molecules are, in principle, studied most exactly by modifying and examining a repeating ordered array of protein molecules, i.e. as in single crystals. While X-ray crystallography was possible with crosslinked carboxypeptidase A (Quiocho &; Richards, 1964), with other protein crystals disorder frequently obscured any reasonably resolvable electron density map. We have examined α-chymotrypsin crystals using electron spin resonance spin labels as a probe of the active site region only, i.e. observing one local region of a protein (crystal) structure in the midst of a (potentially) overall disordered structure. The methods and techniques of handling spin-labeled protein crystals were outlined by Bauer &; Berliner (1979).     

Crystallisation and preliminary crystallographic analysis of P1 nuclease from Penicillium citrinum

P1 nuclease, a zinc-dependent single-strand specific endonuclease from Penicillium citrinum, has been crystallized in three different space groups using either ammonium sulphate or polyethylene glycol 4000 as the precipitating agent. The crystals diffract to between 3 A and 2.2 A. A 4.5 A electron density map has been calculated for a tetragonal crystal form, based on a platinum derivative, and was improved by solvent flattening. The boundaries of the two molecules in the asymmetric unit are clearly visible in most regions and the presence of rod-like density features are indicative of a rather high alpha-helix content. The highest density peaks in the map were identified as a trinuclear zinc cluster present in each monomer by a difference Fourier of an EDTA-soaked crystal.     

Phosphocholine binding immunoglobulin Fab McPC603. An X-ray diffraction study at 2.7 A

The crystal structure of the Fab of McPC603, a phosphocholine-binding mouse myeloma protein, has been refined at 2.7 A resolution by a combination of restrained least-squares refinement and molecular modeling. The overall structure remains as previously reported, with an elbow bend angle between the variable and constant modules of 133 degrees. Some adjustments have been made in the structure of the loops as a result of the refinement. The hypervariable loops are all visible in the electron density map with the exception of three residues in the first hypervariable loop of the light chain. A sulfate ion occupies the site of binding of the phosphate moiety of phosphocholine.     

Structure of yeast hexokinase. 3. Low resolution structure of a second crystal form showing a different quaternary structure, heterologous interaction of subunits and substrate binding

A 7 Å resolution electron density map of a second crystal form (called BII) of yeast hexokinase B has been obtained. This crystal form, unlike the first crystal form (BI), binds nucleotide and sugar substrates. While the overall tertiary structure of each subunit appears to be largely the same in both crystal forms, the quaternary structure of the dimer is completely different in the two crystals. The two subunits in the crystallographic asymmetric unit of form BII are related by a molecular screw axis; that is, the two subunits are related by a 160 ° rotation and a 13 Å translation of one subunit relative to the other along the symmetry axis resulting in non-equivalent environments for the two chemically identical subunits. A deep cleft divides each subunit into two domains or lobes of roughly equal size. The helical regions which are clearly visible as rods of electron density in this map constitute at least 40 to 50% of the polypeptide chain and 70 to 80% of one of the lobes. At this resolution the molecule does not appear to be homologous in detail to other kinases such as phosphoglycerate kinase and adenylate kinase. Sugar substrates and inhibitors bind deeply in the cleft which separates the two lobes and produce substantial alterations in the protein structure.     

Structure of light-harvesting chlorophyll a/b protein complex from plant photosynthetic membranes at 7 A resolution in projection

The structure of thin three-dimensional crystals of the light-harvesting chlorophyll a/b protein complex, an integral membrane protein from the photosynthetic membrane of chloroplasts, has been determined at 7 A (1 A = 0.1 nm) resolution in projection. The structure analysis was carried out by image processing of low-dose electron micrographs, and electron diffraction of thin three-dimensional crystals preserved in tannin. The three-dimensional crystals appeared to be stacks of two-dimensional crystals having p321 symmetry. Results of the image analysis indicated that the crystals were disordered, due to random translational displacement of stacked layers. This was established by a translation search routine that used the low-resolution projection of a single layer as a reference. The reference map was derived from the symmetrized average of two images that showed features consistent with the projected structure of negatively stained two-dimensional crystals. The phase shift resulting from the displacement of each layer was corrected. Phase shifts were then refined by minimizing the phase residual, bringing all layers to the same phase origin. Refined phases from different images were in agreement and reliable to 7 A resolution. A projection map was generated from the averaged phases and electron diffraction amplitudes. The map showed that the complex was a trimer composed of three protein monomers related by 3-fold symmetry. The projected density within the protein monomer suggested membrane-spanning alpha-helices roughly perpendicular to the crystal plane. The density in the centre and on the periphery of the trimeric complex was lower than that of the protein, indicating that this region contained low-density matter, such as lipids and antenna chlorophylls.     

A structural-informatics approach for mining beta-sheets: locating sheets in intermediate-resolution density maps

Here, we report a new computational method, called sheetminer, for mining beta-sheets in the density maps at intermediate resolutions of 6 to 10A. The method employs a multi-step ad hoc morphological analysis of density maps to identify the unique characteristics of beta-sheets. It was tested on density maps from 12 protein crystal structures that were artificially blurred to intermediate resolutions. There are a total of 35 independent beta-sheets with a wide distribution of morphology. The method successfully located 34 of them and missed only one. The method was also applied to an experimental 9A electron cryomicroscopic structure and an 8A X-ray density map. In both cases, the sheet-searching results were found to agree very well with known high-resolution crystal structures. Collectively, these results demonstrate clearly the robustness of sheetminer in locating the regions belonging to beta-sheets in the intermediate-resolution density maps. Furthermore, sheetminer is completely complementary to all other existing computational methods, including helixhunter and threading algorithms. Their combined usage has the potential to significantly enhance the computational modeling capacity for a much more complete interpretation of structural data at intermediate resolutions, from which extraction of functional information would be more effective. This is particularly important in the field of structural genomics, in which the fast screening approach may not always yield crystals that diffract to atomic resolution. An exciting future application of sheetminer is as a valuable tool for revealing the structures of amyloid fibrils that are rich in beta-motifs.     

Human alpha 1-proteinase inhibitor. Crystal structure analysis of two crystal modifications, molecular model and preliminary analysis of the implications for function

Two closely related crystal structures of alpha 1-proteinase inhibitor modified at the reactive site peptide bond Met358--Ser359 have been analysed. The crystal structure has been obtained from diffraction data at 3 A resolution, with phases originally from isomorphous replacement. The electron density map was substantially improved by cyclic averaging of the electron densities of the two crystal forms and allowed the chain to be traced in terms of the known chemical amino acid sequence. Energy restrained crystallographic refinement was initiated and resulted in conventional R-values of 0.251 for the tetragonal crystal form (6 to 3 A resolution) and 0.247 for the hexagonal crystal form (6 to 3.2 A resolution). The polypeptide chain is almost completely arranged in well-defined secondary structural elements: three beta-sheets and eight alpha-helices. The helices are preferentially formed by the first 150 residues. They are in proximity underneath sheet A. The chain ends Met358 and Ser359 of the nicked species are arranged in strands on opposite ends of the molecule indicating a major structural rearrangement upon modification of the intact inhibitor. It is suggested that the Met358 strand is in a different conformation removed from sheet A and approaches Ser359 in the intact inhibitor species. Glu342, which is exchanged by a lysine in the Z-variant is in a strategic position for such a rearrangement. The three carbohydrate chains of alpha 1-proteinase inhibitor have partly defined electron density close to their attachment sites at asparagine residues. The anti-thrombin and ovalbumin amino acid sequences can be accommodated in the alpha 1 inhibitor molecular structure. The intron-exon junctions of the ovalbumin and the alpha 1-proteinase inhibitor gene are all in surface loops of the mature protein.     

Using cryoEM Reconstruction and Phase Extension to Determine Crystal Structure of Bacteriophage ϕ6 Major Capsid Protein

Bacteriophage ?6 is a double-stranded RNA virus that has been extensively studied as a model organism. Here we describe structure determination of ?6 major capsid protein P1. The protein crystallized in base centered orthorhombic space group C222₁. Matthews’s coefficient indicated that the crystals contain from four to seven P1 subunits in the crystallographic asymmetric unit. The self-rotation function had shown presence of fivefold axes of non-crystallographic symmetry in the crystals. Thus, electron density map corresponding to a P1 pentamer was excised from a previously determined cryoEM reconstruction of the ?6 procapsid at 7 Å resolution and used as a model for molecular replacement. The phases for reflections at higher than 7 Å resolution were obtained by phase extension employing the fivefold non-crystallographic symmetry present in the crystal. The averaged 3.6 Å-resolution electron density map was of sufficient quality to allow model building.     

Structure determination of crystalline lobster D-glyceraldehyde-3-phosphate dehydrogenase

Single crystal X-ray data were collected on film for the holoenzyme of lobster d-glyceraldehyde-3-phosphate dehydrogenase to 3·0 Å resolution. Films of potassium tetraiodomercurate, K₂HgI₄, comprising a complete low resolution set, with some additional high resolution terms, were given to us by Drs H. C. Watson and L. J. Banaszak. A 3·0 Å high resolution data set was collected of a p-chloromercuri-phenylsulfonate derivative. All these films were processed on a computer controlled Optronics film scanner. The K₂HgI₄ derivative difference Patterson was initially interpreted in terms of four single sites, one for each polypeptide chain, consistent with the previously determined molecular 222 symmetry. Single isomorphous replacement phases were then sufficient to identify other heavy atom sites. Least-squares refined parameters were used to give multiple isomorphous replacement phases at low resolution, and single isomorphous replacement phases at high resolution. The resultant electron density map was oriented along the molecular 2-fold axes and then averaged over all four equivalent subunits. This process produced a much improved electron density map, which could easily be interpreted in terms of a single polypeptide chain per subunit consistent with the known amino acid sequence. The use of non-crystallographic symmetry to improve the electron density map is equivalent to the molecular replacement method. A comparison is also made with other dehydrogenases.     

Three-dimensional structure of ferricytochrome c' from Rhodospirillum rubrum at 2.8 A resolution.

The structure of ferricytochrome c' extracted from Rhodospirillum rubrum has been determined by the X-ray crystallographic method. Crystals in hexagonal space group P6(1), with unit-cell dimensions a = b = 51.72 A and c = 155.49 A, contain one dimer molecule composed of chemically identical polypeptide chains (monomer I and monomer II) per asymmetric unit. An electron density map has been calculated at a resolution of 2.8 A by the multiple isomorphous replacement method using four-circle diffractometer data from native crystals and two heavy-atom derivatives. The quality of the map was improved by averaging the electron density about the non-crystallographic 2-fold axis relating the two monomers. The initial three-dimensional model of monomer I was built on a computer graphics system and that of monomer II was derived from monomer I using the non-crystallographic symmetry matrices. The dimer structure has been refined using a combination of simulated annealing and conventional restrained least-squares crystallographic refinement. The current model includes 244 amino acid residues (122 x 2) and 2 hemes, with a root-mean-square deviation in bond lengths from ideal values of 0.022 A. The current crystallographic R-factor is 23.3% for 4,481 independent reflections [magnitude of Fo greater than or equal to sigma (F)] between 5.0 and 2.8 A resolution. The monomer molecule is structurally organized as an array of four nearly parallel alpha-helices which construct a left-twisted bundle. One end of the bundle, in which a covalently bound protoheme IX prosthetic group is incorporated, is more divergent than the other.(ABSTRACT TRUNCATED AT 250 WORDS)