A regulatory model for spindle function during mitosis

Structural information on the mitotic spindle of Saccharomyces cerevisiae obtained from isolated whole mount preparations has shown that the spindle undergoes a two-fold increase in length whilst comprising only a single microtubule continuous between the two spindle pole bodies. Further data from immunofluorescence microscopy on the timing of anaphase B has suggested that microtubules do not directly produce the required force, but instead have a more passive role. Here a regulatory function for spindle microtubules during mitosis is explored and the existence of a non-microtubule force-generating system is postulated. Thus it is suggested that the continuous microtubules govern the velocity of anaphase B by providing a resistive force that is itself regulated by the number of microtubules and their rate of polymerization. On this basis a model for the forces acting on a spindle pole body during anaphase is proposed.     

LET-99, GOA-1/GPA-16, and GPR-1/2 are required for aster-positioned cytokinesis

At anaphase, the mitotic spindle positions the cytokinesis furrow [1]. Two populations of spindle microtubules are implicated in cytokinesis: radial microtubule arrays called asters and bundled nonkinetochore microtubules called the spindle midzone [2-4]. In C. elegans embryos, these two populations of microtubules provide two consecutive signals that position the cytokinesis furrow: The first signal is positioned midway between the microtubule asters; the second signal is positioned over the spindle midzone [5]. Evidence for two cytokinesis signals came from the identification of molecules that block midzone-positioned cytokinesis [5-7]. However, no molecules that are only required for, and thus define, the molecular pathway of aster-positioned cytokinesis have been identified. With RNAi screening, we identify LET-99 and the heterotrimeric G proteins GOA-1/GPA-16 and their regulator GPR-1/2 [10-12] in aster-positioned cytokinesis. By using mechanical spindle displacement, we show that the anaphase spindle positions cortical LET-99, at the site of the presumptive cytokinesis furrow. LET-99 enrichment at the furrow depends on the G proteins. GPR-1 is locally reduced at the site of cytokinesis-furrow formation by LET-99, which prevents accumulation of GPR-1 at this site. We conclude that LET-99 and the G proteins define a molecular pathway required for aster-positioned cytokinesis.     

Reverse engineering of force integration during mitosis in the Drosophila embryo

The mitotic spindle is a complex macromolecular machine that coordinates accurate chromosome segregation. The spindle accomplishes its function using forces generated by microtubules (MTs) and multiple molecular motors, but how these forces are integrated remains unclear, since the temporal activation profiles and the mechanical characteristics of the relevant motors are largely unknown. Here, we developed a computational search algorithm that uses experimental measurements to ‘reverse engineer’ molecular mechanical machines. Our algorithm uses measurements of length time series for wild‐type and experimentally perturbed spindles to identify mechanistic models for coordination of the mitotic force generators in Drosophila embryo spindles. The search eliminated thousands of possible models and identified six distinct strategies for MT–motor integration that agree with available data. Many features of these six predicted strategies are conserved, including a persistent kinesin‐5‐driven sliding filament mechanism combined with the anaphase B‐specific inhibition of a kinesin‐13 MT depolymerase on spindle poles. Such conserved features allow predictions of force–velocity characteristics and activation–deactivation profiles of key mitotic motors. Identified differences among the six predicted strategies regarding the mechanisms of prometaphase and anaphase spindle elongation suggest future experiments.     

In vitro reactivation of anaphase B in isolated spindles of the sea urchin egg

Spindles may be isolated from sea urchin eggs so that some mitotic processes can be reactivated in vitro. The isolation media allow spindles to remain stable for days. Transfer of the spindles to reactivation media results in loss of birefringence and breakdown of the matrix within which the microtubules function. If, however, tubulin and either guanosine triphosphate or adenosine triphosphate are present in these media so that tubulin can cycle, the spindles do not break down but grow in size and birefringence and show some of the movements of in vivo spindles. The most prominent is that of anaphase B if the mitotic apparatuses (MAs) have been isolated at a time when anaphase was initiated. When isolated during metaphase, MAs either do not show chromosome movement or, if they do, it is a random movement which causes redistribution of the chromosomes on the spindle surface. In either case, such metaphase spindles grow in size and birefringence. Thus under the proper conditions, cycling microtubules can interact with the spindle matrix to induce chromosome movements which resemble those seen in in vivo cells in the case of anaphase B and show some aspects of anaphase A in at least half the spindles isolated at metaphase, although such movements are not coordinated to show a true anaphase movement.     

A switch in microtubule dynamics at the onset of anaphase B in the mitotic spindle of Schizosaccharomyces pombe

Microtubule dynamics have key roles in mitotic spindle assembly and chromosome movement [1]. Fast turnover of spindle microtubules at metaphase and polewards flux of microtubules (polewards movement of the microtubule lattice with depolymerization at the poles) at both metaphase and anaphase have been observed in mammalian cells [2]. Imaging spindle dynamics in genetically tractable yeasts is now possible using green fluorescent protein (GFP)-tagging of tubulin and sites on chromosomes [3] [4] [5] [6] [7] [8]. We used photobleaching of GFP-labeled tubulin to observe microtubule dynamics in the fission yeast Schizosaccharomyces pombe. Photobleaching did not perturb progress through mitosis. Bleached marks made on the spindle during metaphase recovered their fluorescence rapidly, indicating fast microtubule turnover. Recovery was spatially non-uniform, but we found no evidence for polewards flux. Marks made during anaphase B did not recover fluorescence, and were observed to slide away from each other at the same rate as spindle elongation. Fast microtubule turnover at metaphase and a switch to stable microtubules at anaphase suggest the existence of a cell-cycle-regulated molecular switch that controls microtubule dynamics and that may be conserved in evolution. Unlike the situation for vertebrate spindles, microtubule depolymerization at poles and polewards flux may not occur in S. pombe mitosis. We conclude that GFP-tubulin photobleaching in conjunction with mutant cells should aid research on molecular mechanisms causing and regulating dynamics.     

Poleward kinetochore fiber movement occurs during both metaphase and anaphase-A in newt lung cell mitosis

Microtubules in the mitotic spindles of newt lung cells were marked using local photoactivation of fluorescence. The movement of marked segments on kinetochore fibers was tracked by digital fluorescence microscopy in metaphase and anaphase and compared to the rate of chromosome movement. In metaphase, kinetochore oscillations toward and away from the poles were coupled to kinetochore fiber shortening and growth. Marked zones on the kinetochore microtubules, meanwhile, moved slowly polewards at a rate of approximately 0.5 micron/min, which identifies a slow polewards movement, or "flux," of kinetochore microtubules accompanied by depolymerization at the pole, as previously found in PtK2 cells (Mitchison, 1989b). Marks were never seen moving away from the pole, indicating that growth of the kinetochore microtubules occurs only at their kinetochore ends. In anaphase, marked zones on kinetochore microtubules also moved polewards, though at a rate slower than overall kinetochore-to-pole movement. Early in anaphase-A, microtubule depolymerization at kinetochores accounted on average for 75% of the rate of chromosome-to-pole movement, and depolymerization at the pole accounted for 25%. When chromosome-to-pole movement slowed in late anaphase, the contribution of depolymerization at the kinetochores lessened, and flux became the dominant component in some cells. Over the whole course of anaphase-A, depolymerization at kinetochores accounted on average for 63% of kinetochore fiber shortening, and flux for 37%. In some anaphase cells up to 45% of shortening resulted from the action of flux. We conclude that kinetochore microtubules change length predominantly through polymerization and depolymerization at the kinetochores during both metaphase and anaphase as the kinetochores move away from and towards the poles. Depolymerization, though not polymerization, also occurs at the pole during metaphase and anaphase, so that flux contributes to polewards chromosome movements throughout mitosis. Poleward force production for chromosome movements is thus likely to be generated by at least two distinct molecular mechanisms.     

Cytoplasmic dynein is required for poleward chromosome movement during mitosis in Drosophila embryos

The movement of chromosomes during mitosis occurs on a bipolar, microtubule-based protein machine, the mitotic spindle. It has long been proposed that poleward chromosome movements that occur during prometaphase and anaphase A are driven by the microtubule motor cytoplasmic dynein, which binds to kinetochores and transports them toward the minus ends of spindle microtubules. Here we evaluate this hypothesis using time-lapse confocal microscopy to visualize, in real time, kinetochore and chromatid movements in living Drosophila embryos in the presence and absence of specific inhibitors of cytoplasmic dynein. Our results show that dynein inhibitors disrupt the alignment of kinetochores on the metaphase spindle equator and also interfere with kinetochore- and chromatid-to-pole movements during anaphase A. Thus, dynein is essential for poleward chromosome motility throughout mitosis in Drosophila embryos.     

Membrane Invaginations Reveal Cortical Sites that Pull on Mitotic Spindles in One-Cell C. elegans Embryos

Asymmetric positioning of the mitotic spindle in C. elegans embryos is mediated by force-generating complexes that are anchored at the plasma membrane and that pull on microtubules growing out from the spindle poles. Although asymmetric distribution of the force generators is thought to underlie asymmetric positioning of the spindle, the number and location of the force generators has not been well defined. In particular, it has not been possible to visualize individual force generating events at the cortex. We discovered that perturbation of the acto-myosin cortex leads to the formation of long membrane invaginations that are pulled from the plasma membrane toward the spindle poles. Several lines of evidence show that the invaginations, which also occur in unperturbed embryos though at lower frequency, are pulled by the same force generators responsible for spindle positioning. Thus, the invaginations serve as a tool to localize the sites of force generation at the cortex and allow us to estimate a lower limit on the number of cortical force generators within the cell.     

Dr. Dolittle and the making of the mitotic spindle

The intrinsic polarity of microtubules within cells is exploited each time cells divide. Kinesins, microtubule-associated motor proteins, are required to execute the dramatic events of mitosis: bipolar spindle assembly, metaphase chromosome alignment, anaphase chromosome segregation, and separation of spindle poles prior to cytokinesis. Surprisingly, kinesin-related proteins have been found to move in either "plus-ward" or "minus-ward" directions along microtubules. Evidence from genetic analyses of simple eukaryotes and in vitro activity assays supports the notion that certain subfamilies of kinesin-related proteins provide antagonistic activities necessary to balance mitotic forces. A recent study by Sharp et al.((1)) sheds further light on the subject by exploiting the genetics and cytology of the fruit fly embryo.     

Coupling of cortical dynein and G alpha proteins mediates spindle positioning in Caenorhabditis elegans

Despite being essential for spatial cell division control, the mechanisms governing spindle positioning remain incompletely understood. In the Caenorhabditis elegans one-cell stage embryo, the spindle becomes asymmetrically positioned during anaphase through the action of as-yet unidentified cortical force generators that pull on astral microtubules and that depend on two G alpha proteins and associated proteins. We performed spindle-severing experiments following temporally restricted gene inactivation and drug exposure, and established that microtubule dynamics and dynein are both required for generating efficient pulling forces. We found that the G alpha-associated proteins GPR-1/2 and LIN-5 interact in vivo with LIS-1, a component of the dynein complex. Moreover, we discovered that the LIN-5, GPR-1/2 and the G alpha proteins promote the presence of the dynein complex at the cell cortex. Our findings suggest a mechanism by which the G alpha proteins enable GPR-1/2 and LIN-5 recruitment to the cortex, thus ensuring the presence of cortical dynein. Together with microtubule dynamics, this allows pulling forces to be exerted and proper cell division to be achieved.     

Mammalian spindle orientation and position respond to changes in cell shape in a dynein-dependent fashion

In animal cells, positioning of the mitotic spindle is crucial for defining the plane of cytokinesis and the size ratio of daughter cells. We have characterized this phenomenon in a rat epithelial cell line using microscopy, micromanipulation, and microinjection. Unmanipulated cells position the mitotic spindle near their geometric center, with the spindle axis lying roughly parallel to the long axis of the cell. Spindles that were initially misoriented underwent directed rotation and caused a delay in anaphase onset. To gain further insight into this process, we gently deformed cells with a blunted glass needle to change the spatial relationship between the cortex and spindle. This manipulation induced spindle movement or rotation in metaphase and/or anaphase, until the spindle reached a proper position relative to the deformed shape. Spindle positioning was inhibited by either treatment with low doses of nocodazole or microinjection of antibodies against dynein, apparently due to the disruption of the organization of dynein and/or astral microtubules. Our results suggest that mitotic cells continuously monitor and maintain the position of the spindle relative to the cortex. This process is likely driven by interactions among astral microtubules, the motor protein dynein, and the cell cortex and may constitute part of a mitotic checkpoint mechanism.     

Dynamic positioning of mitotic spindles in yeast: role of microtubule motors and cortical determinants

In the budding yeast Saccharomyces cerevisiae, movement of the mitotic spindle to a predetermined cleavage plane at the bud neck is essential for partitioning chromosomes into the mother and daughter cells. Astral microtubule dynamics are critical to the mechanism that ensures nuclear migration to the bud neck. The nucleus moves in the opposite direction of astral microtubule growth in the mother cell, apparently being "pushed" by microtubule contacts at the cortex. In contrast, microtubules growing toward the neck and within the bud promote nuclear movement in the same direction of microtubule growth, thus "pulling" the nucleus toward the bud neck. Failure of "pulling" is evident in cells lacking Bud6p, Bni1p, Kar9p, or the kinesin homolog, Kip3p. As a consequence, there is a loss of asymmetry in spindle pole body segregation into the bud. The cytoplasmic motor protein, dynein, is not required for nuclear movement to the neck; rather, it has been postulated to contribute to spindle elongation through the neck. In the absence of KAR9, dynein-dependent spindle oscillations are evident before anaphase onset, as are postanaphase dynein-dependent pulling forces that exceed the velocity of wild-type spindle elongation threefold. In addition, dynein-mediated forces on astral microtubules are sufficient to segregate a 2N chromosome set through the neck in the absence of spindle elongation, but cytoplasmic kinesins are not. These observations support a model in which spindle polarity determinants (BUD6, BNI1, KAR9) and cytoplasmic kinesin (KIP3) provide directional cues for spindle orientation to the bud while restraining the spindle to the neck. Cytoplasmic dynein is attenuated by these spindle polarity determinants and kinesin until anaphase onset, when dynein directs spindle elongation to distal points in the mother and bud.     

Sites of microtubule assembly and disassembly in the mitotic spindle

We have microinjected biotinylated tubulin into mitotic fibroblast cells to identify the sites in the spindle at which new subunits are incorporated into microtubules (MTs). Labeled subunits were visualized in the electron microscope using an antibody to biotin followed by a secondary antibody coupled to colloidal gold. Astral MTs incorporate labeled subunits very rapidly by elongation of existing MTs and by new nucleation from the centrosome. At a slower rate, kinetochore MTs incorporate subunits at the kinetochore progressively during metaphase, suggesting a slow poleward flux of subunits in the kinetochore fiber. When cells injected in metaphase were examined in anaphase, a significant fraction of kinetochore MTs was unlabeled, suggesting that depolymerization had occurred at the kinetochore concomitant with chromosome to pole movement. The existence of opposite fluxes at the kinetochore during metaphase and anaphase suggests that two separate forces are responsible for chromosome congression and anaphase movement.     

Cell division and the microtubular cytoskeleton]

Kinetochore microtubules result from an interaction between astral microtubules and the kinetochore of the chromosomes after breakdown of the nuclear envelope at the end of prophase. In this process, the end of a microtubule projecting from one of the polar regions contacts the primary constriction of a chromosome. The latter then undergoes rapid poleward movement. Concerning the mechanism of anaphase chromosome movement, the motive force for the chromosome-to-pole movement appears to be generated at the kinetochore or in the region very close to it. It has not been determined whether chromosomes propel themselves along stationary kinetochore microtubules by a motor at the kinetochore, or they are pulled poleward by a traction fiber consisting of kinetochore microtubules and associated motors. As chromosomes move poleward coordinate disassembly of kinetochore microtubules might occur from their kinetochore ends. In diatom and yeast spindles, elongation of the spindle in anaphase (anaphase B) may be explained by microtubule assembly at polar microtubule ends in the spindle mid-zone and sliding of the antiparallel microtubules from the opposite poles. The sliding force appears to be generated through an ATP-dependent microtubule motor. In isolated sea urchin spindles, the microtubule assembly at the equator alone might provide the force for spindle elongation, although, in addition, involvement of microtubule sliding by a GTP-requiring mechanochemical enzyme cannot be excluded. Discussions were made on possible participation in anaphase chromosome movement of such microtubule motors as dynein, kinesin, dynamin and the claret segregation protein.     

Redistribution of fluorescently labeled tubulin in the mitotic apparatus of sand dollar eggs and the effects of taxol

Fluorescently labeled tubulin was quickly incorporated into the mitotic apparatus when injected into a live sand dollar egg. After a rectangular area (1.6 X 16 microns) of the mitotic spindle was photobleached at metaphase or anaphase by the irradiation of a laser microbeam, redistribution of fluorescence was almost complete within 30 sec. The photobleached area did not change in shape during the redistribution. During the period of redistribution, the bleached area moved slightly toward the near pole at metaphase and anaphase (means: 1.6 and 1.8 micron/min, respectively). These results indicate that redistribution was not due to the exchange of tubulin subunits only at the ends of microtubules but to their rapid exchange at sites along the microtubules in the bleached region. Furthermore, treadmilling of tubulin molecules along with the spindle microtubules possibly occurred at the rate of 1.6 micron/min at metaphase. Birefringence of the mitotic apparatus increased with a large increase in both the number and length of astral rays shortly after taxol was injected. However, the microtubules did not all seem to elongate at the same rate but appeared to become equalized in length. Chromosome movement stopped within 60 sec after the injection. Centrospheres became large and the labeled tubulin already incorporated into the centrospheres was excluded from the enlarged centrospheres. Shortly after the labeled tubulin was injected following the injection of taxol, it accumulated in the peripheral region of the centrospheres, suggesting that microtubules first assembled at this region. Fluorescently labeled tubulin in the mitotic apparatus in the egg after injection of taxol was redistributed much more slowly after photobleaching than in uninjected eggs.     

Polarity of spindle microtubules in Haemanthus endosperm

Structural polarities of mitotic spindle microtubules in the plant Haemanthus katherinae have been studied by lysing endosperm cells in solutions of neurotubulin under conditions that will decorate cellular microtubules with curved sheets of tubulin protofilaments. Microtubule polarity was observed at several positions in each cell by cutting serial thin sections perpendicular to the spindle axis. The majority of the microtubules present in a metaphase or anaphase half-spindle are oriented with their fast-growing or "plus" ends distal to the polar area. Near the polar ends of the spindle and up to about halfway between the kinetichores and the poles, the number of microtubules with opposite polarity is low: 8-20% in metaphase and 2-15% in anaphase cells. Direct examination of 10 kinetochore fibers shows that the majority of these microtubules, too, are oriented with their plus ends distal to the poles, as had been previously shown in animal cells. Sections from the region near the spindle equator reveal an increased fraction of microtubules with opposite polarity. Graphs of polarity vs. position along the spindle axis display a smooth transition from microtubules of one orientation near the first pole, through a region containing equal numbers of the two orientations, to a zone near the second pole where the opposite polarity predominates. We conclude that the spindle of endosperm cells is constructed from two sets of microtubules with opposite polarity that interdigitate near the spindle equator. The length of the zone of interdigitation shortens from metaphase through telophase, consistent with a model that states that during anaphase spindle elongation in Haemanthus, the interdigitating sets of microtubules are moved apart. We found no major changes in the distribution of microtubule polarity in the spindle interzone from anaphase to telophase when cells are engaged in phragmoplast formation. Therefore, the initiation and organization of new microtubules, thought to take place during phragmoplast assembly, must occur without significant alteration of the microtubule polarity distribution.     

Inhibition of aurora B kinase blocks chromosome segregation,overrides the spindle checkpoint,and perturbs microtubule dynamics in mitosis

How kinetochores correct improper microtubule attachments and regulate the spindle checkpoint signal is unclear. In budding yeast, kinetochores harboring mutations in the mitotic kinase Ipl1 fail to bind chromosomes in a bipolar fashion. In C. elegans and Drosophila, inhibition of the Ipl1 homolog, Aurora B kinase, induces aberrant anaphase and cytokinesis. To study Aurora B kinase in vertebrates, we microinjected mitotic XTC cells with inhibitory antibody and found several related effects. After injection of the antibody, some chromosomes failed to congress to the metaphase plate, consistent with a conserved role for Aurora B in bipolar attachment of chromosomes. Injected cells exited mitosis with no evidence of anaphase or cytokinesis. Injection of anti-Xaurora B antibody also altered the microtubule network in mitotic cells with an extension of the astral microtubules and a reduction of kinetochore microtubules. Finally, inhibition of Aurora B in cultured cells and in cycling Xenopus egg extracts caused escape from the spindle checkpoint arrest induced by microtubule drugs. Our findings implicate Aurora B as a critical coordinator relating changes in microtubule dynamics in mitosis, chromosome movement in prometaphase and anaphase, signaling of the spindle checkpoint, and cytokinesis.     

Long astral microtubules uncouple mitotic spindles from the cytokinetic furrow

Astral microtubules (MTs) are known to be important for cleavage furrow induction and spindle positioning, and loss of astral MTs has been reported to increase cortical contractility. To investigate the effect of excess astral MT activity, we depleted the MT depolymerizer mitotic centromere-associated kinesin (MCAK) from HeLa cells to produce ultra-long, astral MTs during mitosis. MCAK depletion promoted dramatic spindle rocking in early anaphase, wherein the entire mitotic spindle oscillated along the spindle axis from one proto-daughter cell to the other, driven by oscillations of cortical nonmuscle myosin II. The effect was phenocopied by taxol treatment. Live imaging revealed that cortical actin partially vacates the polar cortex in favor of the equatorial cortex during anaphase. We propose that this renders the polar actin cortex vulnerable to rupture during normal contractile activity and that long astral MTs enlarge the blebs. Excessively large blebs displace mitotic spindle position by cytoplasmic flow, triggering the oscillations as the blebs resolve.     

Spindle positioning in fibroblasts supports an astral microtubule length dependent force generation at the basal membrane.

V79 Chinese hamster fibroblasts that maintain an elongated shape in metaphase occur at a low frequency and often show the spindle asymmetrically positioned. We show here that this aberrant position is corrected in anaphase by an external force, pulling the spindle into place. The force was applied on astral microtubules because spindle motility was hampered when astral microtubules were poorly developed spontaneously, or destroyed by colcemid. Colcemid also abolished the observed downward positioning of centrosomes in anaphase. One pole of the spindle was usually dominant during correction, but occasionally both poles could become subject to pulling making the spindle move perpendicular to the long axis of the cell, which induced reshaping of the cell. The pulling force acted unevenly with short intervals of resting between the pulling. Spindle elongation also varied in rate but showed a different periodicity than translocation of the spindle, and therefore appeared independently regulated. The length of the spindle increased with the length of the cell, and the rate of spindle elongation and pole movement increased with distance moved, indicating that the forces mediated by astral microtubules increase with their length. Arp1/dynactin, not colocalising with tubulin, was more often continuous with microtubules in anaphase B than in metaphase, and was primarily located at the bottom of the cell. Further, shifts in the geometric gravity centre of the cell occurred in the same direction as migration of the spindle. To explain these results, we suggest that astral microtubles transiently anchored at the bottom of the cell are of particular importance for spindle translocation in fibroblasts.     

M phase-specific kinetochore proteins in fission yeast: microtubule-associating Dis1 and Mtc1 display rapid separation and segregation during anaphase

BACKGROUND: Kinetochore microtubules are made early in mitosis and link chromosomal kinetochores to the spindle poles. They are required later to move the separated sister chromatids toward the opposite poles upon the onset of anaphase. Very little is known about proteins that are responsible for the connection between kinetochores and mitotic microtubules. RESULTS: We here show that fission yeast Dis1 and the related protein Mtc1/Alp14 are both able to bind microtubules in vitro and share an essential function for viability in vivo. The deletion of mtc1+ results in an instability of cytoplasmic microtubules that can be suppressed by the ectopic expression of dis1+. Dis1 and Mtc1 are localized along interphase cytoplasmic microtubules and are mobilized onto the spindle upon mitotic commitment. In chromatin immunoprecipitation (CHIP) experiments Dis1 coprecipitated with the central centromeric DNA in an M phase-specific manner. Consistently, observations of both living cells in which the native, genomic copy of dis1+ tagged with GFP and cells fixed by immunostaining established that Dis1 behaves as a kinetochore protein during the progression from metaphase to anaphase. The central and C-terminal regions of Dis1 are sufficient for interactions with microtubules and the kinetochore, respectively. In anaphase, the GFP signals of both Dis1 and Mtc1 suddenly separate and move quickly toward opposite spindle poles. CONCLUSIONS: Fission yeast Dis1 and Mtc1 are members of an evolutionarily conserved microtubule binding protein family that includes frog XMAP215. Dis1 and Mtc1 are implicated in stabilizing kinetochore microtubules in metaphase and so counteract the action of microtubule destabilizing factors that dominate in anaphase. Dis1 may play a dual role by becoming a part of the kinetochores in an M phase-specific manner, and it may possibly generate connections between kinetochores and microtubules.