sMOL Explorer: an open source, web-enabled database and exploration tool for Small MOLecules datasets

sMOL Explorer is a 2D ligand-based computational tool that provides three major functionalities: data management, information retrieval and extraction and statistical analysis and data mining through Web interface. With sMOL Explorer, users can create personal databases by adding each small molecule via a drawing interface or uploading the data files from internal and external projects into the sMOL database. Then, the database can be browsed and queried with textual and structural similarity search. The molecule can also be submitted to search against external public databases including PubChem, KEGG, DrugBank and eMolecules. Moreover, users can easily access a variety of data mining tools from Weka and R packages to perform analysis including (1) finding the frequent substructure, (2) clustering the molecular fingerprints, (3) identifying and removing irrelevant attributes from the data and (4) building the classification model of biological activity. AVAILABILITY: sMOL Explorer is an Open Source project and is freely available to all interested users at http://www.biotec.or.th/ISL/SMOL/.     

Epistasis Test in Meta-Analysis: A Multi-Parameter Markov Chain Monte Carlo Model for Consistency of Evidence

Conventional genome-wide association studies (GWAS) have been proven to be a successful strategy for identifying genetic variants associated with complex human traits. However, there is still a large heritability gap between GWAS and transitional family studies. The “missing heritability” has been suggested to be due to lack of studies focused on epistasis, also called gene–gene interactions, because individual trials have often had insufficient sample size. Meta-analysis is a common method for increasing statistical power. However, sufficient detailed information is difficult to obtain. A previous study employed a meta-regression-based method to detect epistasis, but it faced the challenge of inconsistent estimates. Here, we describe a Markov chain Monte Carlo-based method, called “Epistasis Test in Meta-Analysis” (ETMA), which uses genotype summary data to obtain consistent estimates of epistasis effects in meta-analysis. We defined a series of conditions to generate simulation data and tested the power and type I error rates in ETMA, individual data analysis and conventional meta-regression-based method. ETMA not only successfully facilitated consistency of evidence but also yielded acceptable type I error and higher power than conventional meta-regression. We applied ETMA to three real meta-analysis data sets. We found significant gene–gene interactions in the renin–angiotensin system and the polycyclic aromatic hydrocarbon metabolism pathway, with strong supporting evidence. In addition, glutathione S-transferase (GST) mu 1 and theta 1 were confirmed to exert independent effects on cancer. We concluded that the application of ETMA to real meta-analysis data was successful. Finally, we developed an R package, etma, for the detection of epistasis in meta-analysis [etma is available via the Comprehensive R Archive Network (CRAN) at https://cran.r-project.org/web/packages/etma/index.html].     

burnr: Fire history analysis and graphics in R

We developed a new software package, burnr, for fire history analysis and plotting in the R statistical programming environment. It was developed for tree-ring fire-scar analysis, but is broadly applicable to other event analyses (e.g., avalanches, frost rings, or culturally modified trees). Our new package can read, write, and manipulate standard tree-ring fire history FHX files, produce fire—demography charts, calculate fire frequency and seasonality statistics, and run superposed epoch analysis (SEA). A key benefit of burnr is that it enables automation of analyses and plotting, especially for large data sets. The package also facilitates creative plotting, mapping, and analyses when combined with the thousands of packages available in R. In this paper, we describe the basic functionality of burnr and introduce users to fire history analyses in R.     

Open source software for the analysis of microarray data

DNA microarray assays represent the first widely used application that attempts to build upon the information provided by genome projects in the study of biological questions. One of the greatest challenges with working with microarrays is collecting, managing, and analyzing data. Although several commercial and noncommercial solutions exist, there is a growing body of freely available, open source software that allows users to analyze data using a host of existing techniques and to develop their own and integrate them within the system. Here we review three of the most widely used and comprehensive systems, the statistical analysis tools written in R through the Bioconductor project (http://www.bioconductor.org), the Java-based TM4 software system available from The Institute for Genomic Research (http://www.tigr.org/software), and BASE, the Web-based system developed at Lund University (http://base.thep.lu.se).     

phyloseq: An R Package for Reproducible Interactive Analysis and Graphics of Microbiome Census Data

Background

The analysis of microbial communities through DNA sequencing brings many challenges: the integration of different types of data with methods from ecology, genetics, phylogenetics, multivariate statistics, visualization and testing. With the increased breadth of experimental designs now being pursued, project-specific statistical analyses are often needed, and these analyses are often difficult (or impossible) for peer researchers to independently reproduce. The vast majority of the requisite tools for performing these analyses reproducibly are already implemented in R and its extensions (packages), but with limited support for high throughput microbiome census data.

Results

Here we describe a software project, phyloseq, dedicated to the object-oriented representation and analysis of microbiome census data in R. It supports importing data from a variety of common formats, as well as many analysis techniques. These include calibration, filtering, subsetting, agglomeration, multi-table comparisons, diversity analysis, parallelized Fast UniFrac, ordination methods, and production of publication-quality graphics; all in a manner that is easy to document, share, and modify. We show how to apply functions from other R packages to phyloseq-represented data, illustrating the availability of a large number of open source analysis techniques. We discuss the use of phyloseq with tools for reproducible research, a practice common in other fields but still rare in the analysis of highly parallel microbiome census data. We have made available all of the materials necessary to completely reproduce the analysis and figures included in this article, an example of best practices for reproducible research.

Conclusions

The phyloseq project for R is a new open-source software package, freely available on the web from both GitHub and Bioconductor.     

Rintact: enabling computational analysis of molecular interaction data from the IntAct repository

MOTIVATION: The IntAct repository is one of the largest and most widely used databases for the curation and storage of molecular interaction data. These datasets need to be analyzed by computational methods. Software packages in the statistical environment R provide powerful tools for conducting such analyses. RESULTS: We introduce Rintact, a Bioconductor package that allows users to transform PSI-MI XML2.5 interaction data files from IntAct into R graph objects. On these, they can use methods from R and Bioconductor for a variety of tasks: determining cohesive subgraphs, computing summary statistics, fitting mathematical models to the data or rendering graphical layouts. Rintact provides a programmatic interface to the IntAct repository and allows the use of the analytic methods provided by R and Bioconductor. AVAILABILITY: Rintact is freely available at http://bioconductor.org     

Multitrait Bayesian shrinkage and variable selection models with the BGLR-R package

The BGLR-R package implements various types of single-trait shrinkage/variable selection Bayesian regressions. The package was first released in 2014, since then it has become a software very often used in genomic studies. We recently develop functionality for multitrait models. The implementation allows users to include an arbitrary number of random-effects terms. For each set of predictors, users can choose diffuse, Gaussian, and Gaussian–spike–slab multivariate priors. Unlike other software packages for multitrait genomic regressions, BGLR offers many specifications for (co)variance parameters (unstructured, diagonal, factor analytic, and recursive). Samples from the posterior distribution of the models implemented in the multitrait function are generated using a Gibbs sampler, which is implemented by combining code written in the R and C programming languages. In this article, we provide an overview of the models and methods implemented BGLR’s multitrait function, present examples that illustrate the use of the package, and benchmark the performance of the software.     

Meta-analysis for Discovering Rare-Variant Associations: Statistical Methods and Software Programs

There is heightened interest in using next-generation sequencing technologies to identify rare variants that influence complex human diseases and traits. Meta-analysis is essential to this endeavor because large sample sizes are required for detecting associations with rare variants. In this article, we provide a comprehensive overview of statistical methods for meta-analysis of sequencing studies for discovering rare-variant associations. Specifically, we discuss the calculation of relevant summary statistics from participating studies, the construction of gene-level association tests, the choice of transformation for quantitative traits, the use of fixed-effects versus random-effects models, and the removal of shadow association signals through conditional analysis. We also show that meta-analysis based on properly calculated summary statistics is as powerful as joint analysis of individual-participant data. In addition, we demonstrate the performance of different meta-analysis methods by using both simulated and empirical data. We then compare four major software packages for meta-analysis of rare-variant associations—MASS, RAREMETAL, MetaSKAT, and seqMeta—in terms of the underlying statistical methodology, analysis pipeline, and software interface. Finally, we present PreMeta, a software interface that integrates the four meta-analysis packages and allows a consortium to combine otherwise incompatible summary statistics.     

USAGE: a web-based approach towards the analysis of SAGE data. Serial Analysis of Gene Expression

MOTIVATION: SAGE enables the determination of genome-wide mRNA expression profiles. A comprehensive analysis of SAGE data requires software, which integrates (statistical) data analysis methods with a database system. Furthermore, to facilitate data sharing between users, the application should reside on a central server and be accessed via the internet. Since such an application was not available we developed the USAGE package. RESULTS: USAGE is a web-based application that comprises an integrated set of tools, which offers many functions for analysing and comparing SAGE data. Additionally, USAGE includes a statistical method for the planning of new SAGE experiments. USAGE is available in a multi-user environment giving users the option of sharing data. USAGE is interfaced to a relational database to store data and analysis results. The USAGE query editor allows the composition of queries for searching this database. Several database functions have been included which enable the selection and combination of data. USAGE provides the biologist increased functionality and flexibility for analysing SAGE data. AVAILABILITY: USAGE is freely accessible for academic institutions at http://www.cmbi.kun.nl/usage/. The source code of USAGE is freely available for academic institutions on request from the first author.     

NanoMethViz: An R/Bioconductor package for visualizing long-read methylation data

A key benefit of long-read nanopore sequencing technology is the ability to detect modified DNA bases, such as 5-methylcytosine. The lack of R/Bioconductor tools for the effective visualization of nanopore methylation profiles between samples from different experimental groups led us to develop the NanoMethViz R package. Our software can handle methylation output generated from a range of different methylation callers and manages large datasets using a compressed data format. To fully explore the methylation patterns in a dataset, NanoMethViz allows plotting of data at various resolutions. At the sample-level, we use dimensionality reduction to look at the relationships between methylation profiles in an unsupervised way. We visualize methylation profiles of classes of features such as genes or CpG islands by scaling them to relative positions and aggregating their profiles. At the finest resolution, we visualize methylation patterns across individual reads along the genome using the spaghetti plot and heatmaps, allowing users to explore particular genes or genomic regions of interest. In summary, our software makes the handling of methylation signal more convenient, expands upon the visualization options for nanopore data and works seamlessly with existing methylation analysis tools available in the Bioconductor project. Our software is available at https://bioconductor.org/packages/NanoMethViz.     

Identifying differential exon splicing using linear models and correlation coefficients

Background  

With the availability of the Affymetrix exon arrays a number of tools have been developed to enable the analysis. These however can be expensive or have several pre-installation requirements. This led us to develop an analysis workflow for analysing differential splicing using freely available software packages that are already being widely used for gene expression analysis. The workflow uses the packages in the standard installation of R and Bioconductor (BiocLite) to identify differential splicing. We use the splice index method with the LIMMA framework. The main drawback with this approach is that it relies on accurate estimates of gene expression from the probe-level data. Methods such as RMA and PLIER may misestimate when a large proportion of exons are spliced. We therefore present the novel concept of a gene correlation coefficient calculated using only the probeset expression pattern within a gene. We show that genes with lower correlation coefficients are likely to be differentially spliced.     

Single-molecule dataset (SMD): a generalized storage format for raw and processed single-molecule data

Background

Single-molecule techniques have emerged as incisive approaches for addressing a wide range of questions arising in contemporary biological research [Trends Biochem Sci 38:30–37, 2013; Nat Rev Genet 14:9–22, 2013; Curr Opin Struct Biol 2014, 28C:112–121; Annu Rev Biophys 43:19–39, 2014]. The analysis and interpretation of raw single-molecule data benefits greatly from the ongoing development of sophisticated statistical analysis tools that enable accurate inference at the low signal-to-noise ratios frequently associated with these measurements. While a number of groups have released analysis toolkits as open source software [J Phys Chem B 114:5386–5403, 2010; Biophys J 79:1915–1927, 2000; Biophys J 91:1941–1951, 2006; Biophys J 79:1928–1944, 2000; Biophys J 86:4015–4029, 2004; Biophys J 97:3196–3205, 2009; PLoS One 7:e30024, 2012; BMC Bioinformatics 288 11(8):S2, 2010; Biophys J 106:1327–1337, 2014; Proc Int Conf Mach Learn 28:361–369, 2013], it remains difficult to compare analysis for experiments performed in different labs due to a lack of standardization.

Results

Here we propose a standardized single-molecule dataset (SMD) file format. SMD is designed to accommodate a wide variety of computer programming languages, single-molecule techniques, and analysis strategies. To facilitate adoption of this format we have made two existing data analysis packages that are used for single-molecule analysis compatible with this format.

Conclusion

Adoption of a common, standard data file format for sharing raw single-molecule data and analysis outcomes is a critical step for the emerging and powerful single-molecule field, which will benefit both sophisticated users and non-specialists by allowing standardized, transparent, and reproducible analysis practices.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-014-0429-4) contains supplementary material, which is available to authorized users.     

Flow: Statistics, visualization and informatics for flow cytometry

Flow is an open source software application for clinical and experimental researchers to perform exploratory data analysis, clustering and annotation of flow cytometric data. Flow is an extensible system that offers the ease of use commonly found in commercial flow cytometry software packages and the statistical power of academic packages like the R BioConductor project.     

Automics: an integrated platform for NMR-based metabonomics spectral processing and data analysis

Background  

Spectral processing and post-experimental data analysis are the major tasks in NMR-based metabonomics studies. While there are commercial and free licensed software tools available to assist these tasks, researchers usually have to use multiple software packages for their studies because software packages generally focus on specific tasks. It would be beneficial to have a highly integrated platform, in which these tasks can be completed within one package. Moreover, with open source architecture, newly proposed algorithms or methods for spectral processing and data analysis can be implemented much more easily and accessed freely by the public.     

MeV+R: using MeV as a graphical user interface for Bioconductor applications in microarray analysis

We present MeV+R, an integration of the JAVA MultiExperiment Viewer program with Bioconductor packages. This integration of MultiExperiment Viewer and R is easily extensible to other R packages and provides users with point and click access to traditionally command line driven tools written in R. We demonstrate the ability to use MultiExperiment Viewer as a graphical user interface for Bioconductor applications in microarray data analysis by incorporating three Bioconductor packages, RAMA, BRIDGE and iterativeBMA.