Skewness angle of interfibrillar proteoglycans increases with applied load on mitral valve chordae tendineae

In highly aligned connective tissues, such as tendon, collagen fibrils are linked together by proteoglycans (PGs). Recent mechanical and theoretical studies on tendon micromechanics have implied that PGs mediate mechanical interactions between adjacent collagen fibrils. We used transmission electron microscopy to observe the collagen fibril-PG interactions in porcine mitral valve chordae under variable loading conditions and found that PGs attached to collagen fibrils perpendicularly in the load-free situation, and became skewed when the chordae were loaded. The average skewness angle of PGs increased with the applied load, and hence the strain in the chordae. The observation of PG skewing with the application of load demonstrates that, in mitral valve chordae, interfibrillar slippage occurs and that PGs play a role in fibril-to-fibril interaction and likely transfer force. The results of this study provide new insights into the mechanical role of PGs and support some recent theoretical models.     

The material properties of the native porcine mitral valve chordae tendineae: an in vitro investigation

The material properties of the mitral valve chordae tendineae are important for the understanding of leaflet coaptation configuration and chordal pathology. There is limited information about the mechanical properties of the chordae during physiologic loading. Dual camera stereo photogrammetry was used to measure strains of the chordae in vitro under physiologic loading conditions. Two high-speed, high-resolution cameras captured the movement of graphite markers attached to the central section of the chordae. A uniaxial test simulating the same loading conditions was conducted on the same chordae using the same markers. The maximum strain experienced during the cardiac cycle was 4.29% +/- 3.43%. The loading rate was higher at 75.3% +/- 48.6% strain per second than the unloading rate at -54.8% +/- -56.6% strain per second. The anterior lateral strut chordae had a higher maximum strain (5.7% +/- 3.8%) and loading rate (80.5% +/- 51.9% strain per second) than the posterior medial strut chordae (5.5% +/- 2.3% strain and 68.1% +/- 48.3% strain per second). The posterior medial strut chordae had a higher unloading rate (-68.5% +/- -59.1% strain per second) than the anterior lateral strut chordae (-44.9% +/- -57.2% strain per second). Although the anterior lateral and posterior medial strut chordae have a significantly different diameter and length, they experience a similar strain, strain rate, and tension. In conclusion, a non-destructive technique was developed to measure in vitro chordal strain in the mitral valve. This technique allows the investigation of the behavior of biological tissues under physiologic loading conditions.     

Finite element analysis of the mitral apparatus: annulus shape effect and chordal force distribution

This study presents a three-dimensional finite element model of the mitral apparatus using a hyperelastic transversely isotropic material model for the leaflets. The objectives of this study are to illustrate the effects of the annulus shape on the chordal force distribution and on the mitral valve response during systole, to investigate the role of the anterior secondary (strut) chordae and to study the influence of thickness of the leaflets on the leaflets stresses. Hence, analyses are conducted with a moving and fixed saddle shaped annulus and with and without anterior secondary chordae. We found that the tension in the secondary chordae represents 31% of the load carried by the papillary muscles. When removing the anterior secondary chordae, the tension in the primary anterior chordae is almost doubled, the displacement of the anterior leaflet toward the left atrium is also increased. The moving annulus configuration with an increasing annulus saddle height does not give significant changes in the chordal force distribution and in the leaflet stress compared to the fixed annulus. The results also show that the maximum principle stresses in the anterior leaflet are carried by the collagen fibers. The stresses calculated in the leaflets are very sensitive to the thickness employed.     

Collagen fibril size and crimp morphology in ruptured and intact Achilles tendons.

The present study examined the hypothesis that collagen fibril diameter and crimp angle in ruptured human Achilles tendons differed from that of intact ones. Tissue samples were obtained from the central core (distal core) and the posterior periphery (distal superficial) at the rupture site, and the proximally intact (proximal superficial) part of the tendon in 10 subjects (38+/-8 years) with a complete tendon rupture. For comparisons corresponding tissue samples were procured from age (38+/-7 years) and gender matched intact Achilles tendons during routine forensic autopsy. The cross-sectional area density and diameter distribution of fibrils were analyzed using stereological techniques of digitized electron microscopy biopsy cross-sections, while crimp angle was measured by the changing banding pattern of collagen fibers when rotated between crossed polars. Nine of 10 persons with tendon ruptures reported that the injury did not occur during exceedingly large forces, and none experienced any symptoms in the days or months prior to the injury. Fibril diameter distribution showed no region-specific differences in either the ruptured or intact tendons for either group. However, in the distal core there were fewer fibrils in the ruptured compared to the intact tendons in 60-150 nm range, P<0.01. Similarly, in the distal superficial portion there were fewer fibrils in the ruptured compared to the intact tendons in the 90-120 nm range, 2P<0.05, while there were no differences in the proximal superficial tendons. Crimp angle did not display any region-specific differences, or any difference between the rupture and intact tendons. In conclusion, these data suggest that although crimp morphology is unchanged there appears to be a site-specific loss of larger fibrils in the core and periphery of the Achilles tendon rupture site. Moreover, the lack of symptoms prior to the rupture suggests that clinical tendinopathy is not an etiological factor in complete tendon ruptures.     

Collagen organization in canine myxomatous mitral valve disease: an x-ray diffraction study

Collagen fibrils, a major component of mitral valve leaflets, play an important role in defining shape and providing mechanical strength and flexibility. Histopathological studies show that collagen fibrils undergo dramatic changes in the course of myxomatous mitral valve disease in both dogs and humans. However, little is known about the detailed organization of collagen in this disease. This study was designed to analyze and compare collagen fibril organization in healthy and lesional areas of myxomatous mitral valves of dogs, using synchrotron small-angle x-ray diffraction. The orientation, density, and alignment of collagen fibrils were mapped across six different valves. The findings reveal a preferred collagen alignment in the main body of the leaflets between two commissures. Qualitative and quantitative analysis of the data showed significant differences between affected and lesion-free areas in terms of collagen content, fibril alignment, and total tissue volume. Regression analysis of the amount of collagen compared to the total tissue content at each point revealed a significant relationship between these two parameters in lesion-free but not in affected areas. This is the first time this technique has been used to map collagen fibrils in cardiac tissue; the findings have important applications to human cardiology.     

Stresses in the closed mitral valve: a model study

In the present model study on the closed mitral valve, tensile force in the chordae tendineae is related to transvalvular pressure using a mathematical model of mechanics of the closed mitral valve. Circumferential stress as well as bending stress in the valve leaflets were neglected. Without precisely knowing the mechanical properties of the leaflet material, geometry of the leaflets was estimated by applying Laplace's law, which relates leaflet stress to leaflet curvature. Independent of shape of the mitral valve orifice, under all circumstances tensile force in the chordae tendineae was calculated to be equal or greater than half the force exerted on the mitral valve orifice by the transvalvular pressure.     

The structure and mechanical properties of the mitral valve leaflet-strut chordae transition zone

Biaxial testing, histological measurements and theoretical continuum mechanics modeling were employed to investigate the structure and mechanical properties of the mitral valve leaflet-strut chordae transition zone (LCT). The results showed that geometry changes and collagen fiber angle distribution contribute to variations in mechanical properties in the LCT zone. A simple three-coefficient exponential constitutive law was able to simulate the variation in stress-stretch behavior in the LCT zone by spatially varying a single coefficient and incorporating collagen fiber angle and degree of alignment. This quantitative information can greatly improve the predictions from biomechanical valve models by incorporating regional variations of structure and properties in the mitral leaflet-chordae tendineae system. These data provide the foundation for a computational model for studying stress distributions before and following chordal rupture, which may indicate the underlying reasons for the development of valve insufficiency in patients.     

The precision of lateral size control in the assembly of corneal collagen fibrils

Collagen fibrils in the corneal stroma have been recognised to have a high degree of uniformity of diameter and spatial arrangement compared with those in other mature connective tissues. The precision of this lateral size control has been determined in this study by mass per unit length measurements on fibrils isolated from adult bovine corneal stroma. At the molecular level, however, there are substantial variations in lateral size, both between fibrils and along individual fibrils. The mean mass per unit length was measured to be 304 kDa nm(-1), equivalent to 347 collagen molecules in transverse section and had a standard deviation of 8.3%. The variation of lateral size along individual fibrils was measured as a mass slope over approximately 7 microm lengths (100 D-periods) and had a mean mass slope equivalent to 0.56 molecules per D-period. Smoothly tapered tips of length approximately 7 microm were also observed with a mass slope of about approximately three molecules per D-period. The frequency of these tips was used to estimate a mean fibril length of approximately 940 microm in the sample tissue. Observations of molecular polarity within the fibril shafts and tips were used to consider possible models of fibril assembly.     

Exuberant accessory mitral valve tissue with possible true parachute mitral valve: a case report

ABSTRACT: INTRODUCTION: A parachute mitral valve is defined as a unifocal attachment of mitral valve chordae tendineae independent of the number of papillary muscles. Data from the literature suggests that the valve can be distinguished on the basis of morphological features as either a parachute-like asymmetrical mitral valve or a true parachute mitral valve. A parachute-like asymmetrical mitral valve has two papillary muscles; one is elongated and located higher in the left ventricle. A true parachute mitral valve has a single papillary muscle that receives all chordae, as was present in our patient. Patients with parachute mitral valves during childhood have multilevel left-side heart obstructions, with poor outcomes without operative treatment. The finding of a parachute mitral valve in an adult patient is extremely rare, especially as an isolated lesion. In adults, the unifocal attachment of the chordae results in a slightly restricted valve opening and, more frequently, valvular regurgitation. CASE PRESENTATION: A 40-year-old Caucasian female patient was admitted to a primary care physician due to her recent symptoms of heart palpitation and chest discomfort on effort. Transthoracic echocardiography showed chordae tendineae which were elongated and formed an unusual net shape penetrating into left ventricle cavity. The parasternal short axis view of her left ventricle showed a single papillary muscle positioned on one side in the posteromedial commissure receiving all chordae. Her mitral valve orifice was slightly eccentric and the chordae were converting into a single papillary muscle. Mitral regurgitation was present and it was graded as moderate to severe. Her left atrium was enlarged. There were no signs of mitral stenosis or a subvalvular ring. She did not have a bicuspid aortic valve or coarctation of the ascending aorta. The dimensions and systolic function of her left ventricle were normal. Our patient had a normal body habitus, without signs of heart failure. Her functional status was graded as class I according to the New York Heart Association grading. CONCLUSIONS: A recently published review found that, in the last several decades, there have been only nine adult patients with parachute mitral valve disease reported, of which five had the same morphological characteristics as our patient. This case presentation should encourage doctors, especially those involved in echocardiography, to contribute their own experience, knowledge and research in parachute mitral valve disease to enrich statistical and epidemiologic databases and aid clinicians in getting acquainted with this rare disease.     

Mechanical properties of human patellar tendon at the hierarchical levels of tendon and fibril

Tendons are strong hierarchical structures, but how tensile forces are transmitted between different levels remains incompletely understood. Collagen fibrils are thought to be primary determinants of whole tendon properties, and therefore we hypothesized that the whole human patellar tendon and its distinct collagen fibrils would display similar mechanical properties. Human patellar tendons (n = 5) were mechanically tested in vivo by ultrasonography. Biopsies were obtained from each tendon, and individual collagen fibrils were dissected and tested mechanically by atomic force microscopy. The Young's modulus was 2.0 ± 0.5 GPa, and the toe region reached 3.3 ± 1.9% strain in whole patellar tendons. Based on dry cross-sectional area, the Young's modulus of isolated collagen fibrils was 2.8 ± 0.3 GPa, and the toe region reached 0.86 ± 0.08% strain. The measured fibril modulus was insufficient to account for the modulus of the tendon in vivo when fibril content in the tendon was accounted for. Thus, our original hypothesis was not supported, although the in vitro fibril modulus corresponded well with reported in vitro tendon values. This correspondence together with the fibril modulus not being greater than that of tendon supports that fibrillar rather than interfibrillar properties govern the subfailure tendon response, making the fibrillar level a meaningful target of intervention. The lower modulus found in vitro suggests a possible adverse effect of removing the tissue from its natural environment. In addition to the primary work comparing the two hierarchical levels, we also verified the existence of viscoelastic behavior in isolated human collagen fibrils.     

Tendon crimps and peritendinous tissues responding to tensional forces

Tendons transmit forces generated from muscle to bone making joint movements possible. Tendon collagen has a complex supramolecular structure forming many hierarchical levels of association; its main functional unit is the collagen fibril forming fibers and fascicles. Since tendons are enclosed by loose connective sheaths in continuity with muscle sheaths, it is likely that tendon sheaths could play a role in absorbing/transmitting the forces created by muscle contraction. In this study rat Achilles tendons were passively stretched in vivo to be observed at polarized light microscope (PLM), scanning electron microscope (SEM) and transmission electron microscope (TEM). At PLM tendon collagen fibers in relaxed rat Achilles tendons ran straight and parallel, showing a periodic crimp pattern. Similarly tendon sheaths showed apparent crimps. At higher magnification SEM and TEM revealed that in each tendon crimp large and heterogeneous collagen fibrils running straight and parallel suddenly changed their direction undergoing localized and variable modifications. These fibril modifications were named fibrillar crimps. Tendon sheaths displayed small and uniform fibrils running parallel with a wavy course without any ultrastructural aspects of crimp. Since in passively stretched Achilles tendons fibrillar crimps were still observed, it is likely that during the tendon stretching, and presumably during the tendon elongation in muscle contraction, the fibrillar crimp may be the real structural component of the tendon crimp acting as shock absorber. The peritendinous sheath can be stretched as tendon, but is not actively involved in the mechanism of shock absorber as the fibrillar crimp. The different functional behaviour of tendons and sheaths may be due to the different structural and molecular arrangement of their fibrils.     

Novel techniques in mitral repair: extended and rotational chordal transfer

Mitral valve repair is preferable to mitral valve replacement because of low rate of thromboembolism, resistance to endocarditis, excellent late durability, and no need for anticoagulation in the majority of patients. This article describes 2 novel techniques for repairing the anterior mitral leaflet prolapse. The extended chordal transfer is achieved by transferring an extended segment of posterior mitral leaflet and, rotational chordal transfer, by rotating the transferred segment either vertical or horizontal. Both techniques are simple and reproducible. It uses patient's own natural chorda and eliminates the problem of knotting and determination of appropriate chordal length faced with other techniques.     

Mechanism of incomplete mitral leaflet coaptation--interaction of chordal restraint and changes in mitral leaflet coaptation geometry. Insight from in vitro validation of the premise of force equilibrium

Clinically observed incomplete mitral leaflet coaptation was reproduced in vitro by altering the balance of the chordal tethering and chordal coapting force components. Mitral leaflet coaptation geometry was distorted by changes of the spatial relations between the papillary muscles and the mitral valve as well as hemodynamics. Mitral leaflet malalignment was accentuated by a redistribution of the chordal tethering and coapting force components. For the overall assessment of systolic mitral leaflet configuration in functional mitral regurgitation it is important to consider the interaction between chordal restraint and an altered mitral leaflet coaptation geometry.     

Open-Heart Correction of Mitral Valvular Disease: Review of 30 Cases

Thirty patients with mitral valve disease operated upon by the open-heart technique during the period 1958-1962 were studied. In 15 insufficiency predominated. Clinical, radiological and pathological findings included the following: aortic valve disease is the commonest associated lesion; cusp calcification is uncommon in mitral insufficiency; left atrial enlargement is more pronounced in mitral insufficiency; a relaxed annulus is the commonest pathological lesion associated with mitral insufficiency, with ruptured chordae in second place. Five of the 15 patients with mitral insufficiency and four of the 15 with mitral stenosis died during the postoperative period, while clinical improvement was apparent in seven and 11, in the respective groups. The standard techniques of annuloplasty, suturing of ruptured chordae, and open commissurotomy were found to provide satisfactory results. Partial Ivalon prosthetic replacement was unsatisfactory. The study suggests that a more liberal use of the open-heart procedure in surgical correction of complicated mitral valve lesions is indicated.     

Tip-mediated fusion involving unipolar collagen fibrils accounts for rapid fibril elongation, the occurrence of fibrillar branched networks in skin and the paucity of collagen fibril ends in vertebrates.

Collagen fibrils are the principal source of mechanical strength of connective tissues such as tendon, skin, cornea, cartilage and bone. The ability of these tissues to withstand tensile forces is directly attributable to the length and diameter of the fibrils, and to interactions between individual fibrils. Although electron microscopy studies have provided information on fibril diameters, little is known about the length of fibrils in tissue and how fibrils interact with each other. The question of fibril length has been difficult to address because fibril ends are rarely observed in cross-sections of tissue. The paucity of fibril ends, or tips, has led to controversy about how long individual fibrils might be and how the fibrils grow in length and diameter. This review describes recent discoveries that are relevant to these questions. We now know that vertebrate collagen fibrils are synthesised as short (1-3 microm) early fibrils that fuse end-to-end in young tissues to generate very long fibrils. The diameter of the final fibril is determined by the diameter of the collagen early fibrils. During a late stage of tissue assembly fibril tips fuse to fibril shafts to generate branched networks. Of direct relevance to fibril fusion is the fact that collagen fibrils can be unipolar or bipolar, depending on the orientation of collagen molecules in the fibril. Fusion relies on: (1) specific molecular interactions at the carboxyl terminal ends of unipolar collagen fibrils; and (2) the insulator function of small proteoglycans to shield the surfaces of fibrils from inappropriate fusion reactions. The fusion of tips to shafts to produce branched networks of collagen fibrils is an elegant mechanism to increase the mechanical strength of tissues and provides an explanation for the paucity of fibril tips in older tissue.     

The relation between collagen fibril kinematics and mechanical properties in the mitral valve anterior leaflet

We have recently demonstrated that the mitral valve anterior leaflet (MVAL) exhibited minimal hysteresis, no strain rate sensitivity, stress relaxation but not creep (Grashow et al., 2006, Ann Biomed Eng., 34(2), pp. 315-325; Grashow et al., 2006, Ann Biomed. Eng., 34(10), pp. 1509-1518). However, the underlying structural basis for this unique quasi-elastic mechanical behavior is presently unknown. As collagen is the major structural component of the MVAL, we investigated the relation between collagen fibril kinematics (rotation and stretch) and tissue-level mechanical properties in the MVAL under biaxial loading using small angle X-ray scattering. A novel device was developed and utilized to perform simultaneous measurements of tissue level forces and strain under a planar biaxial loading state. Collagen fibril D-period strain (epsilonD) and the fibrillar angular distribution were measured under equibiaxial tension, creep, and stress relaxation to a peak tension of 90 N/m. Results indicated that, under equibiaxial tension, collagen fibril straining did not initiate until the end of the nonlinear region of the tissue-level stress-strain curve. At higher tissue tension levels, epsilonD increased linearly with increasing tension. Changes in the angular distribution of the collagen fibrils mainly occurred in the tissue toe region. Using epsilonD, the tangent modulus of collagen fibrils was estimated to be 95.5+/-25.5 MPa, which was approximately 27 times higher than the tissue tensile tangent modulus of 3.58+/-1.83 MPa. In creep tests performed at 90 N/m equibiaxial tension for 60 min, both tissue strain and epsilonD remained constant with no observable changes over the test length. In contrast, in stress relaxation tests performed for 90 min epsilonD was found to rapidly decrease in the first 10 min followed by a slower decay rate for the remainder of the test. Using a single exponential model, the time constant for the reduction in collagen fibril strain was 8.3 min, which was smaller than the tissue-level stress relaxation time constants of 22.0 and 16.9 min in the circumferential and radial directions, respectively. Moreover, there was no change in the fibril angular distribution under both creep and stress relaxation over the test period. Our results suggest that (1) the MVAL collagen fibrils do not exhibit intrinsic viscoelastic behavior, (2) tissue relaxation results from the removal of stress from the fibrils, possibly by a slipping mechanism modulated by noncollagenous components (e.g. proteoglycans), and (3) the lack of creep but the occurrence of stress relaxation suggests a "load-locking" behavior under maintained loading conditions. These unique mechanical characteristics are likely necessary for normal valvular function.     

The molecular and fibrillar structure of collagen and its relationship to the mechanical properties of connective tissue

The conformation of type I collagen molecules has been refined using a linked-atom least-squares procedure in conjunction with high-quality X-ray diffraction data. In many tendons these molecules pack in crystalline arrays and a careful measurement of the positions of the Bragg reflections allows the unit cell to be determined with high precision. From a further analysis of the X-ray data it can be shown that the highly ordered overlap region of the collagen fibrils consists of a crystalline array of molecular segments inclined by a small angle with respect to the fibril axis. In contrast, the gap region is less well ordered and contains molecular segments that are likely to be inclined by a similar angle but in a different vertical plane to that found in the overlap region. The collagen molecule thus has a D-periodic crimp in addition to the macroscopic crimp observed visually in the collagen fibres of many connective tissues. The growth and development of collagen fibrils have been studied by electron microscopy for a diverse range of connective tissues and the general pattern of fibril growth has been established as a function of age. In particular, relationships between fibril size distribution, the content and composition of the glycosaminoglycans in the matrix and the mechanical role played by the fibrils in the tissue have been formulated and these now seem capable of explaining many new facets of connective tissue structure and function.     

Structure and mechanical properties of the longitudinal ligaments and ligamentum flavum of the spine

Stress-strain curves were recorded from anterior and posterior longitudinal ligaments and ligamenta flava dissected from pig lumbar spines. Ligaments were examined during extension by light microscopy, to observe crimp structure, and by X-ray diffraction, to determine collagen fibril orientations. Scanning electron microscopy (SEM) was used to examine ligaments fixed at high and low strains. Initial stages of ligament extension involvd alignment of collagen fibrils. Collagen fibrils in unstrained ligamentum flavum were much more disoriented than in the longitudinal ligaments. Thus, fibril alignment, and consequent stiffening, occurred at much higher strains than for longitudinal ligaments, allowing ligamentum flavum to exploit the extensibility of its elastin.