Meloplication of the malar fat pads by percutaneous cable-suture technique for midface rejuvenation: outcome study (392 cases, 6 years' experience)

The aging anterior midface is restored by reversing the contour undulations produced by sagging of the malar fat pad complex toward the nasolabial line. The convex irregularities include the exposed bulges of the post-septal fat, the unveiled malar bag, and the prominent nasolabial fold. The depressed irregularities are represented by the cresent-shaped hollow at the lid-cheek junction, the accentuated nasojugal groove, and the deepening nasolabial line. Repositioning of the ptotic malar fat pad, among other elements of meloplasty, represents a key procedure. In this study, the malar fat pad has been defined as a fan-shaped structure by external anatomic landmarks that correlate closely to the findings in cadaveric dissections and clinical cases, confirmed by the findings of spiral computed tomographic scanning. A simple but powerful adjustable and long-lasting percutaneous suture elevation technique was developed over the past 6 years by the senior author (G.H.S.) to reposition the fat pad in a superolateral direction. Through a dot incision within the nasolabial line, a permanent CV-3 Gore-Tex (or 4-0 clear Prolene) suspension suture, looped through a Gore-Tex anchor graft, suspends the malar fat pad in a direction perpendicular to the nasolabial line. A second suspension system is identically passed through another lower dot incision to broaden the repositioning vectors on the malar fat pad. Tension on each of the paired suture ends elevates the malar fat pad by 1 to 3 mm as measured from the nasolabial dot incisions. The sutures are fixed to the deep temporal fascia through a Gore-Tex tab, effectively stabilizing the soft-tissue repositioning. This maneuver may be performed in younger patients who present with an isolated malar fat pad ptosis without excess facial skin. The procedure may also be incorporated into open rhytidectomies to address this recalcitrant area along with superficial musculoaponeurotic system tightening. A total of 392 patients since 1995 underwent suture elevation of the malar fat pads. An outcome study indicated that the usage of two permanent sutures with Gore-Tex anchor grafts since 1998 resulted in improvement in midface rejuvenation of over 82 percent. Early and late complication rates were small and temporary. Patient acceptance was excellent, indicative of the benefits of anatomic repositioning of the malar fat pad complex.     

睑袋和面中部松垂联合矫正术

目的:探讨应用睑袋和面中部联合手术改善面中部老化的方法与效果。方法:采用睑袋常规切口,从眼轮匝肌及面中部SMAS下分离。使颧脂肪垫复位固定,并将眶肌筋膜韧带牵拉缝合于外眦部骨膜上。结果:本组共69例,其中58例术后1-18个月获得随访,睑袋、加深的鼻唇沟基本消失,面中部松垂明显改善,效果良好。结论:本术式操作简便,年轻化效果满意,创伤轻,并发症少,是一个临床可以选用的较好手术方法。     

The use of botulinum toxin type A in aesthetic mandibular contouring

The lower third of Asian faces is wider than that of Caucasians and it is determined by the size and width of the mandibular bone and the thickness of muscles and subcutaneous fat tissues surrounding it. Efforts to create an aesthetically slim and smooth facial contour line in nonobese people have led the authors to focus on two approaches: surgical resection of the masseteric muscle and modeling ostectomy of the square-angled mandibular bone. Because these procedures present some problems, the authors adopted a nonsurgical concept that chemically denervates muscles and reduces the bulk of the muscle. The authors have conducted a total of 1021 clinical cases from March of 2001 through September of 2002, in which patients were treated with botulinum toxin type A (Dysport; Ipsen Ltd, Slough, United Kingdom) for remodeling the lower facial contour line; 383 of those cases were followed up for at least 3 months after the initial injection. A database was made by measuring the change in the thickness of the injected muscle with an ultrasonogram. Eleven patients underwent resection of the mandibular angle before injection. The preinjection ostectomy group was involved in the study as a result of their dissatisfaction with the surgical results; they had a rather thick masseter muscle and not a bone problem. Some had both bone problems and a thick masseter muscle. Three months after the botulinum toxin injection, the thickness of the muscle was reduced by 31 percent on average. The atrophic effect of injection was observed after 2 to 4 weeks for most patients. Seventy percent of the 383 patients tracked were greatly satisfied with the result, with another 23 percent generally satisfied. No long-term side effects were reported. Masseteric hypertrophy is frequent in Asians because of racial characteristics and dietary habits. Botulinum toxin type A has made a new epoch in facial contouring for Asians. Considering that Asians have a prominent malar and a prominent mandible angle, the reduction in the thickness of the masseter can provoke relative prominence of the malar and mandible angle. Therefore, precise indication and anatomy of the facial muscle should be thoroughly understood, which will decrease the incidence of side effects and problems. Botulinum toxin type A (Dysport) injection is simple in technique, has few side effects, and promises a rapid return to daily life. The authors conclude that the injection of botulinum toxin type A can replace surgical masseter resection.     

A review of automatic lung tumour segmentation in the era of 4DCT

AimTo review the literature on auto-contouring methods of lung tumour volumes on four-dimensional computed tomography (4DCT).BackgroundManual delineation of lung tumour on 4DCT has been the gold standard in clinical practice. However, it is resource intensive due to the high volume of data which results in longer contouring duration and uncertainties in defining target. Auto-contouring may present as an attractive alternative by decreasing manual inputs required, thus improving the contouring process. This review aims to assess the accuracy, variability and contouring duration of automatic contouring compared with manual contouring in lung cancer on 4DCT datasets.Materials and methodsA search and review of literature were conducted to identify studies regarding lung tumour contouring on 4DCT. Manual and auto-contours were assessed and compared based on accuracy, variability and contouring duration.ResultsThirteen studies were included in this review and their results were compared. Accuracy of auto-contours was found to be comparable to manual contours. Auto-contouring resulted in lesser inter-observer variation when compared to manual contouring, however there was no significant reduction in intra-observer variability. Additionally, contouring duration was reduced with auto-contouring although long computation time could present as a bottleneck.ConclusionAuto-contouring is reliable and efficient, producing accurate contours with better consistency compared to manual contours. However, manual inputs would still be required both before and after auto-propagation.     

Body image and quality of life in post massive weight loss body contouring patients

Objective: Because post‐bariatric surgery patients undergo massive weight loss, the resulting skin excess can lead to both functional problems and profound dissatisfaction with appearance. Correcting skin excess could improve all these corollaries, including body image. Presently, few data are available documenting body image and weight‐related quality of life in this population. Research Methods and Procedures: Eighteen patients who underwent both bariatric surgery and body contouring completed our study. Both established surveys and new surveys designed specifically for the study were used to assess body perception and ideals, quality of life, and mood. Patients were surveyed at the following time‐points: pre‐body contouring (after massive weight loss) and both 3 and 6 month post‐body contouring. Statistical testing was performed using Student's t test and ANOVA. Results: The mean age of the patients was 46 ± 10 years (standard deviation). Quality of life improved after obesity surgery and was significantly enhanced after body contouring. Three months after body contouring, subjects ascribed thinner silhouettes to both current appearance and ideal body image. Body image also improved with body contouring surgery. Mood remained stable over 6 months. Discussion: Body contouring after surgical weight loss improved both quality‐of‐life measurements and body image. Initial body dissatisfaction did not correlate with mood. Body contouring improved body image but produced dissatisfaction with other parts of the body, suggesting that as patients become closer to their ideal, these ideals may shift. We further developed several new assessment methods that may prove useful in understanding these post‐surgical weight loss patients.     

Endoscopically assisted malarplasty: one incision and two dissection planes

Asian society is uniquely concerned about the distinctive facial features associated with malar prominence. Various methods of reduction malarplasty have been developed and are currently being applied. In this study, a new approach to malarplasty was experimentally assessed between December of 1999 and August of 2001. After having received careful observations of their facial features and full counseling sessions, 32 patients were selected. These patients had three distinctive characteristics: (1) severe zygomatic arch prominence and normal zygomatic body prominence, (2) desire for only a reduction of the lateral prominence, and (3) desire for a less invasive surgery. Through a short incision in the temporal area, the authors performed the dissection as two different planes. Endoscopic dissection between the superficial layer of deep temporal fascia and the temporoparietal fascia to the zygomatic body and blunt dissection under the deep layer of the deep temporal fascia to the zygomatic arch were performed. Complete osteotomy of the zygomatic arch and an incomplete osteotomy of the zygomatic body were then performed with a reciprocating saw. Finally, the zygomatic arch for the zygoma infraction was pressed manually. The major advantages of this procedure are its simplicity and the short operation and recovery time, with little bleeding and edema.     

Hierarchical clustering applied to automatic atlas based segmentation of 25 cardiac sub-structures

PurposeSegmentation of cardiac sub-structures for dosimetric analyses is usually performed manually in time-consuming procedure. Automatic segmentation may facilitate large-scale retrospective analysis and adaptive radiotherapy. Various approaches, among them Hierarchical Clustering, were applied to improve performance of atlas-based segmentation (ABS).MethodsTraining dataset of ABS consisted of 36 manually contoured CT-scans. Twenty-five cardiac sub-structures were contoured as regions of interest (ROIs). Five auto-segmentation methods were compared: simultaneous automatic contouring of all 25 ROIs (Method-1); automatic contouring of all 25 ROIs using lungs as anatomical barriers (Method-2); automatic contouring of a single ROI for each contouring cycle (Method-3); hierarchical cluster-based automatic contouring (Method-4); simultaneous truth and performance level estimation (STAPLE). Results were evaluated on 10 patients. Dice similarity coefficient (DSC), average Hausdorff distance (AHD), volume comparison and physician score were used as validation metrics.ResultsAtlas performance improved increasing number of atlases. Among the five ABS methods, Hierarchical Clustering workflow showed a significant improvement maintaining a clinically acceptable time for contouring. Physician scoring was acceptable for 70% of the ROI automatically contoured. Inter-observer evaluation showed that contours obtained by Hierarchical Clustering method are statistically comparable with them obtained by a second, independent, expert contourer considering DSC. Considering AHD, distance from the gold standard is lower for ROIs segmented by ABS.ConclusionsHierarchical clustering resulted in best ABS results for the primarily investigated platforms and compared favorably to a second benchmark system. Auto-contouring of smaller structures, being in range of variation between manual contourers, may be ideal for large-scale retrospective dosimetric analysis.     

Reduction malarplasty through an intraoral incision: a new method

Until recently, osteotomies and surgeries to reposition prominent zygoma have been performed by means of a coronal incision or intraoral and preauricular incisions. Such incisions have penalties such as scars, the possibility of facial nerve injury, and long operative times. After reflecting on their past experiences with facial bone surgery, the authors developed an alternative approach. In this method, the cheekbone protrusion is corrected by performing an osteotomy and repositioning through an intraoral incision only. During the past 3 years, the authors have operated on 23 patients with malar prominences. The amount of bone to be removed is determined by preoperative interviews, physical examinations, and x-rays. Intraoral incisions provide access to the zygomatic body and lateral orbital rim. After L-shaped osteotomies (two parallel vertical and one transverse osteotomy at the medial part of the zygomatic body), the midsegment is removed. The posterior portion of the zygomatic arch was approached through the medial aspect and was outfractured using a curved osteotome. After completing the triple osteotomy, the movable zygomatic complex was reduced medially and fixed with miniplates and screws on the zygomaticomaxillary buttress. The patients were followed for 9.5 months, with acceptable results and few complications. The authors conclude that this technique is an effective and safe method of reduction malarplasty.     

Chondrolaryngoplasty for appearance

Prominent thyroid cartilage (pomus Adamus) is frequently a constant embarrassment to the male transsexual as well as to the asthenic male. The demand for reduction and contouring of the pomus Adamus continues to increase in our societies today. Since our first presentation of this procedure, we have been able to follow 31 patients over a 17-year period. We present a review of our technique of chondrolaryngoplasty, with anatomic details and a follow-up of 31 patients ranging from 4 months to 17 years. The results are effective and satisfying, with few complications. Those which do occur tend to be transient, with the most frequent being a temporary mild voice weakness. We believe this operation has a place among the techniques of plastic surgeons.     

Rejuvenation of the midface by elevating the malar fat pad: review of technique,cases, and complications

The midface is an area where definite and consistent improvement is still hard to achieve. Vertical suspension of the malar fat pad is an effective midface lift that complements facial rejuvenation to obtain an overall appearance of youth and beauty while maintaining the personal features of the patient. To substantiate its effectiveness, the authors evaluated the complications and long-term results of the malar fat pad elevation proper and in conjunction with other facial procedures. A retrospective review of the medical records of 458 consecutive patients who underwent malar fat pad elevation by the senior author (B.C.D.) from January of 1994 to January of 2000 was conducted. Because 14 patients had their malar fat pad re-elevated, the number of midface lifts totaled 472. Of these, 437 had a combined superficial musculoaponeurotic system excision and tightening, 19 had a combined limited superficial musculoaponeurotic system plication/imbrication, and 16 had elevation of the malar fat pad only. Elevating the malar fat pad appears to be a sound, straightforward, and effective means of rendering a youthful midface. It consistently reshapes the malar eminence, softens the nasolabial fold, and rejuvenates the lower eyelid. This technique provides lasting results, with an acceptable complication rate. Facial nerve injury, in particular, was infrequent and temporary. In addition, the prehairline scar happened to be quite inconspicuous, especially in patients older than 55 years. This experience confirms that malar fat pad elevation is a safe and effective method to rejuvenate the central third of the face.     

Facial skeletal reconstruction using porous polyethylene implants

A retrospective review of clinical outcomes was performed to determine the clinical utility and morbidity associated with the use of porous polyethylene facial implants. Three hundred seventy implants were placed in 162 consecutive patients, in 178 operations performed in 11 years. The number of patients, the number of implants used, and the average follow-up period were categorized according to the cause of the deformity. The resultant distribution was as follows: acquired (tumor-related), 17 patients, 39 implants, and 30 months; congenital, eight patients, 31 implants, and 92 months; aesthetic, 39 patients, 97 implants, and 24 months; secondary posttraumatic, 48 patients, 139 implants, and 37 months; and acute trauma (internal orbit reconstruction), 50 patients, 64 implants, and 9 months. The distribution of implants according to location was as follows: frontal, 21; temporal, 30; internal orbit, 145; infraorbital rim, 28; malar, 58; paranasal, 29; nasal, 13; mandible, 24; and chin, 22. The combined average follow-up period per patient was 27 months (range, immediate postoperative period to 11 years). All implants were placed in the subperiosteal plane, and the majority were fixed with titanium screws. Antibiotics were administered perioperatively. No implants were extruded or migrated, formed clinically apparent capsules, or caused symptoms attributable to bioincompatibility. The overall reoperation rate was 10 percent (n = 16), which included operations to remove implants because of acute infections (2 percent, n = 3) or a late infection (1 percent, n = 1), to remove implants causing displeasing contours (2 percent, n = 3), and to improve contours (6 percent, n = 9). Porous polyethylene implants have biomaterial properties favorable for facial skeletal augmentation. Screw application of the implants to the skeleton allows precise predictable contouring, thus limiting the need for revisional surgical procedures.     

Deformable registration-based segmentation of the bowel on Megavoltage CT during pelvic radiotherapy

During pelvic radiotherapy bowel loops (BL) are subject to inter-fraction changes. MVCT images have the potential to provide daily bowel segmentation. We assess the feasibility of deformable registration and contour propagation in replacing manual BL segmentation on MVCT.Four observers delineated BL on the planning kVCT and on one therapy MVCT in eight patients. Inter-observer variations in BLs contouring were quantified using DICE index. BLs were then automatically propagated onto MVCT by a commercial software for image deformation and subsequently manually corrected. The agreement between propagated BL/propagated + manually corrected BL vs manual were quantified using the DICE. Contouring times were also compared. The impact on DVH of using the deformable-registration method was assessed. The same procedures were repeated on high-resolution planning-kVCT and therapy-kVCT.MVCTs are adequate to visualize BL (average DICE: 0.815), although worse than kVCT (average DICE:0.889). When comparing propagated vs manual BL, a poor agreement was found (average DICE: 0.564/0.646 for MVCT/KVCT). After manual correction, average DICE indexes increased to 0.810/0.897. The contouring time was reduced to 15 min with the semi-automatic approach from 30 min with manual contouring. DVH parameters of propagated BL were significantly different from manual BL (p < 0.0001); after manual correction, no significant differences were seen.MVCT are suitable for BL visualization. The use of a software to segment BL on MVCT starting from BL-kVCT contours was feasible if followed by manual correction. The method resulted in a substantial reduction of contouring time without detrimental effect on the quality of bowel segmentation and DVH estimates.     

Periosteal suspension of the lower eyelid and cheek following subciliary exposure of facial fractures

Following craniofacial procedures that involve stripping of the periosteum and soft tissue over the zygomatic maxillary complex, descent of soft tissue with a decrease in anterior projection over the malar area and increase in fullness in the nasolabial fold have been seen to be a problem by these authors. Simple repositioning of the soft tissues to their normal anatomic position may be used to alleviate this problem.     

A new method of methyl methacrylate fixation in skull reconstruction

Fifty-two methyl methacrylate cranioplasties were performed in 47 patients over a 5-year period. The indications for the original craniectomy fell into four categories. Nine patients had a craniectomy for tumor, 32 for trauma, 5 for infection, and 1 for aneurysm. A new approach, which eliminates the need for suture or wire fixation and which facilitates intraoperative calvarial contouring, is presented. An excellent cosmetic result is the norm with this technique.     

Feminization of the forehead: contour changing to improve female aesthetics

Anthropologists have identified those characteristics which enable them to differentiate the male from the female skull. Some women have masculine skeletal characteristics which, if changed, would improve their facial appearance. Changing the skeletal configuration through bony contouring of the craniofacial skeleton for aesthetic purposes is a natural spinoff of craniomaxillofacial surgery. Techniques for sculpturing the masculine characteristics present in the foreheads of some females are discussed. The deformity has been divided into three subdivisions. Group 1 patients can be treated through bony contouring alone; group 2 patients require bony contouring in conjunction with a methyl methacrylate cranioplasty; and group 3 are those patients with a more severe deformity requiring osteotomies. The technique, results, complications, and patient acceptance are discussed.     

Infection of proplast malar implants following dental injections.

Two cases of late infections of malar implants are reported following dental work. Inadvertent inoculation of the implants by mouth organisms during injections for local dental anesthesia is implicated as the causative factor. Patients should warn their dentists that a malar alloplast has been inserted. Alternative techniques of maxillary dental anesthesia should be entertained, and antibiotic prophylaxis should be considered.     

Survey of the variation in alar and malar thorns in skates: Phylogenetic implications (Chondrichthyes: Rajoidei)

A total of 62 species, representing 24 of the 28 supraspecific taxa of skates, was surveyed for the presence, distribution, and structure of alar and malar thorns. The survey revealed that alar thorns are almost universally present in mature male skates, and that malar thorns are of two types that may have separate origins. The location and orientation of alar thorns differed in two major clades of skates (groups I and II). They were either exposed on the disc with the crown oriented obliquely to the long axis of the base or imbedded in slits in the integument and oriented parallel to the long axis of the base. Group I possessed the former type of thorns and, with several exceptions, group II possessed the latter type. Group I either lacked malar thorns or possessed malar thorns that were most likely derived from generalized placoid scales. Group II possessed, with several exceptions, malar thorns derived from enlarged placoid scales. Within group I the supraspecific taxa Atlantoraja and Rioraja possessed unique alar thorns that were reclined laterally and associated with lateral grooves in the integument. Within group II the supraspecific taxa Anacanthobatis, Cruriraja, Dipturus, Okamejei, Raja, the North Pacific Assemblage, and the Amphi-American Assemblage had a large barb on the distal section of the crown of the alar thorn that suggests that these taxa form a clade. The crown of the alar thorns of the latter five supraspecific taxa was undulatory, thus supporting their monophyletic status. Another assemblage within group II had ridges that ran most of the length of the crown of the alar thorns corroborating their monophyletic status. The survey also suggested that variation of integumentary grooves associated with the alar thorns in Bathyraja, and presence or absence of malar thorns in Psammobatis, may be phylogenetically informative. © 1996 Wiley-Liss, Inc.     

Malar stripe size and prominence in peregrine falcons vary positively with solar radiation: support for the solar glare hypothesis

Many falcons (Falco spp.) exhibit a distinct dark plumage patch below the eye, termed the malar stripe. This stripe is hypothesized to reduce the amount of solar glare reflected into the eyes while foraging, thereby increasing hunting efficiency in bright conditions. Here, we use a novel, global-scale correlative approach to test this ‘solar glare hypothesis'' in peregrine falcons (Falco peregrinus), the most widespread falcon species, using web-sourced photographs from across the species'' global range. We found that the size and prominence of the malar stripe were positively associated with average annual solar radiation, but not with other environmental variables, such as temperature and rainfall. Our results provide the first published evidence for the hypothesis that this plumage feature functions to reduce the amount of solar glare reflected into the falcon''s eyes, thereby improving the ability to pinpoint and target agile prey in bright conditions.