Genome Engineering of Drosophila with the CRISPR RNA-Guided Cas9 Nuclease

We have adapted a bacterial CRISPR RNA/Cas9 system to precisely engineer the Drosophila genome and report that Cas9-mediated genomic modifications are efficiently transmitted through the germline. This RNA-guided Cas9 system can be rapidly programmed to generate targeted alleles for probing gene function in Drosophila.     

Multiple barriers to nonhomologous DNA end joining during meiosis in Drosophila

Repair of meiotic double-strand breaks (DSBs) uses the homolog and recombination to yield crossovers while alternative pathways such as nonhomologous end joining (NHEJ) are suppressed. Our results indicate that NHEJ is blocked at two steps of DSB repair during meiotic prophase: first by the activity of the MCM-like protein MEI-218, which is required for crossover formation, and, second, by Rad51-related proteins SPN-B (XRCC3) and SPN-D (RAD51C), which physically interact and promote homologous recombination (HR). We further show that the MCM-like proteins also promote the activity of the DSB repair checkpoint pathway, indicating an early requirement for these proteins in DSB processing. We propose that when a meiotic DSB is formed in the absence of both MEI-218 and SPN-B or SPN-D, a DSB substrate is generated that can enter the NHEJ repair pathway. Indeed, due to its high error rate, multiple barriers may have evolved to prevent NHEJ activity during meiosis.     

The effects of sex-biased gene expression and X-linkage on rates of adaptive protein sequence evolution in Drosophila

A faster rate of adaptive evolution of X-linked genes compared with autosomal genes may be caused by the fixation of new recessive or partially recessive advantageous mutations (the Faster-X effect). This effect is expected to be largest for mutations that affect only male fitness and absent for mutations that affect only female fitness. We tested these predictions in Drosophila melanogaster by using genes with different levels of sex-biased expression and by estimating the extent of adaptive evolution of non-synonymous mutations from polymorphism and divergence data. We detected both a Faster-X effect and an effect of male-biased gene expression. There was no evidence for a strong association between the two effects—modest levels of male-biased gene expression increased the rate of adaptive evolution on both the autosomes and the X chromosome, but a Faster-X effect occurred for both unbiased genes and female-biased genes. The rate of genetic recombination did not influence the magnitude of the Faster-X effect, ruling out the possibility that it reflects less Hill–Robertson interference for X-linked genes.     

Targeted Heritable Mutation and Gene Conversion by Cas9-CRISPR in Caenorhabditis elegans

We have achieved targeted heritable genome modification in Caenorhabditis elegans by injecting mRNA of the nuclease Cas9 and Cas9 guide RNAs. This system rapidly creates precise genomic changes, including knockouts and transgene-instructed gene conversion.     

Rapid and Precise Engineering of the Caenorhabditis elegans Genome with Lethal Mutation Co-Conversion and Inactivation of NHEJ Repair

As in other organisms, CRISPR/Cas9 methods provide a powerful approach for genome editing in the nematode Caenorhabditis elegans. Oligonucleotides are excellent repair templates for introducing substitutions and short insertions, as they are cost effective, require no cloning, and appear in other organisms to target changes by homologous recombination at DNA double-strand breaks (DSBs). Here, I describe a methodology in C. elegans to efficiently knock in epitope tags in 8–9 days, using a temperature-sensitive lethal mutation in the pha-1 gene as a co-conversion marker. I demonstrate that 60mer oligos with 29 bp of homology drive efficient knock-in of point mutations, and that disabling nonhomologous end joining by RNAi inactivation of the cku-80 gene significantly improves knock-in efficiency. Homology arms of 35–80 bp are sufficient for efficient editing and DSBs up to 54 bp away from the insertion site produced knock-ins. These findings will likely be applicable for a range of genome editing approaches in C. elegans, which will improve editing efficiency and minimize screening efforts.     

Efficient Marker-Free Recovery of Custom Genetic Modifications with CRISPR/Cas9 in Caenorhabditis elegans

Facilitated by recent advances using CRISPR/Cas9, genome editing technologies now permit custom genetic modifications in a wide variety of organisms. Ideally, modified animals could be both efficiently made and easily identified with minimal initial screening and without introducing exogenous sequence at the locus of interest or marker mutations elsewhere. To this end, we describe a coconversion strategy, using CRISPR/Cas9 in which screening for a dominant phenotypic oligonucleotide-templated conversion event at one locus can be used to enrich for custom modifications at another unlinked locus. After the desired mutation is identified among the F₁ progeny heterozygous for the dominant marker mutation, F₂ animals that have lost the marker mutation are picked to obtain the desired mutation in an unmarked genetic background. We have developed such a coconversion strategy for Caenorhabditis elegans, using a number of dominant phenotypic markers. Examining the coconversion at a second (unselected) locus of interest in the marked F₁ animals, we observed that 14–84% of screened animals showed homologous recombination. By reconstituting the unmarked background through segregation of the dominant marker mutation at each step, we show that custom modification events can be carried out recursively, enabling multiple mutant animals to be made. While our initial choice of a coconversion marker [rol-6(su1006)] was readily applicable in a single round of coconversion, the genetic properties of this locus were not optimal in that CRISPR-mediated deletion mutations at the unselected rol-6 locus can render a fraction of coconverted strains recalcitrant to further rounds of similar mutagenesis. An optimal marker in this sense would provide phenotypic distinctions between the desired mutant/+ class and alternative +/+, mutant/null, null/null, and null/+ genotypes. Reviewing dominant alleles from classical C. elegans genetics, we identified one mutation in dpy-10 and one mutation in sqt-1 that meet these criteria and demonstrate that these too can be used as effective conversion markers. Coconversion was observed using a variety of donor molecules at the second (unselected) locus, including oligonucleotides, PCR products, and plasmids. We note that the coconversion approach described here could be applied in any of the variety of systems where suitable coconversion markers can be identified from previous intensive genetic analyses of gain-of-function alleles.     

Elevated levels of expression associated with regions of the Drosophila genome that lack crossing over

The recombinational environment influences patterns of molecular evolution through the effects of Hill-Robertson interference. Here, we examine genome-wide patterns of gene expression with respect to recombinational environment in Drosophila melanogaster. We find that regions of the genome lacking crossing over exhibit elevated levels of expression, and this is most pronounced for genes on the entirely non-crossing over fourth chromosome. We find no evidence for differences in the patterns of gene expression between regions of high, intermediate and low crossover frequencies. These results suggest that, in the absence of crossing over, selection to maintain control of expression may be compromised, perhaps due to the accumulation of deleterious mutations in regulatory regions. Alternatively, higher gene expression may be evolving to compensate for defective protein products or reduced translational efficiency.     

Opposing roles for DNA structure-specific proteins Rad1, Msh2, Msh3, and Sgs1 in yeast gene targeting

Targeted gene replacement (TGR) in yeast and mammalian cells is initiated by the two free ends of the linear targeting molecule, which invade their respective homologous sequences in the chromosome, leading to replacement of the targeted locus with a selectable gene from the targeting DNA. To study the postinvasion steps in recombination, we examined the effects of DNA structure-specific proteins on TGR frequency and heteroduplex DNA formation. In strains deleted of RAD1, MSH2, or MSH3, we find that the frequency of TGR is reduced and the mechanism of TGR is altered while the reverse is true for deletion of SGS1, suggesting that Rad1 and Msh2:Msh3 facilitate TGR while Sgs1 opposes it. The altered mechanism of TGR in the absence of Msh2:Msh3 and Rad1 reveals a separate role for these proteins in suppressing an alternate gene replacement pathway in which incorporation of both homology regions from a single strand of targeting DNA into heteroduplex with the targeted locus creates a mismatch between the selectable gene on the targeting DNA and the targeted gene in the chromosome.     

Highly Efficient Genome Modifications Mediated by CRISPR/Cas9 in Drosophila

We report that Cas9/gRNA mediates efficient genetic modifications in Drosophila. Through targeting seven loci, we achieved a germline efficiency of up to 100%. Genes in both heterochromatin and euchromatin can be modified efficiently. Thus the Cas9/gRNA system is an attractive tool for rapid disruption of essentially any gene in Drosophila.     

Improving gene replacement by intracellular formation of linear homologous DNA

BACKGROUND: Gene targeting is a potential tool for gene therapy but is limited by the low rate of homologous recombination. Using highly homologous linear DNA improves gene targeting frequency but requires microinjection into nuclear cells to be effective. Because transfection of circular DNA is more efficient than transfection of linear DNA and adaptable to viral vectors, we developed a system for the intracellular release of linear fragments from circular plasmids. METHODS: Only one cutting site inside the "donor" DNA was not convenient because it led to integration of exogenous sequences into the target. So we constructed several "donor" plasmids containing the homologous sequences flanked by two I-Sce I recognition sites. Expression of I-Sce I allowed intracellular delivery of "ends-out" (replacement) vectors. We compared the efficiency of different constructions to correct a mutated gfp target. RESULTS: Co-transfection of "donor" plasmids and an I-Sce I expression vector into CHO cells enhanced the correction of an extrachromosomal mutated gfp target by at least 10 times. Maximum correction was observed with the greatest homology size and maximum effect of I-Sce I was obtained when the long hemi-sites of the duplicated I-Sce I sites were contiguous to the homologous sequence. Unexpectedly, the reverse orientation of I-Sce I sites provided little or no effect, probably due to the asymmetrical activity of the I-Sce I meganuclease. CONCLUSIONS: Releasing homologous DNA fragments with I-Sce I enhances gene replacement. This work provides the basis for the future design of viral vectors for gene replacement.     

Non-neutral processes drive the nucleotide composition of non-coding sequences in Drosophila

The nature of the forces affecting base composition is a key question in genome evolution. There is uncertainty as to whether differences in the GC contents of non-coding sequences reflect differences in mutational bias, or in the intensity of selection or biased gene conversion. We have used a polymorphism dataset for non-coding sequences on the X chromosome of Drosophila simulans to examine this question. The proportion of GC-->AT versus AT-->GC polymorphic mutations in a locus is correlated with its GC content. This implies the action of forces that favour GC over AT base pairs, which are apparently strongest in GC-rich sequences.     

A series of vectors that simplify mammalian gene targeting

In order to facilitate the procedure of mammalian gene targeting, we have produced and functionally tested a series of generic vectors. Homologous recombination has been achieved with each vector. The vectors are designed for both replacement and insertional recombination, are suitable for hit and run strategies and contain all necessary genetic elements for both positive-negative and promoterless/gene fusion enrichment of homologous integrations. Multiple unique restriction sites are included to simplify the incorporation of genomic targeting sequences.     

基因打靶技术的研究进展

基因打靶技术是一项新兴的分子生物学技术,是利用外源DNA与受体细胞染色体DNA上的同源序列之间发生重组,并整合在预定位点上,从而改变细胞遗传特性的方法。它的产生是遗传工程领域的一次革命,为发育生物学、分子遗传学、免疫学及医学等学科提供了一个全新的、强有力的研究手段。目前基因打靶技术在研究基因的结构和功能、表达与调控,转基因及基因治疗等方面均取得了进展。但基因打靶技术仍存在一些问题,主要是打靶的效率太低。本文综述了基因打靶技术的原理、操作程序并对提高基因打靶效率的可能途径进行了探讨。Progress on Gene TargetingLIU Hong-quan1,DAI Ji-xun1,YU Wen-gong2,YANG Kun-feng11.Ocean University of Qingdao,College of Marine Life Sciences,Qingdao 266003,China;2.Institute of Marine Drugs and Foods,Qingdao 266003,ChinaAbstract:Gene targeting is a rising technology in molecular biology,which is defined as the introduction of exogeneous DNA to specific site in genome by homologous recombination,and consequently change the hereditary character of the cell.This technology provides a new and powerful means for research in developmental biology,molecular genetics,immunology and medicine.Progresses have been made in exploring gene structure and function,gene expression and regulation,transgene and gene therapy with the application of gene targeting.But there are some problems in gene targeting,especially for the low efficiency.This article just provided a review of the principle and program of gene targeting,and discussed the possible approaches to increase the efficiency of gene targeting.Key words：gene targeting;homologous recombination;targeting vector;targeting efficiency     

基因打靶及其应用

用活细胞染色体DNA可与外源性DNA同源序列发生同源重组的性质,达到定点修饰改造染色体某基因的目的,此法称基因打靶．基因的同源重组是较普遍的生物现象,其分子机理尚未阐明,但活细胞内确有一酶系可使DNA的同源序列在细胞内发生重组,这一事实已无可争辨．此事实为基因打靶的理论基础．基因打靶技术操作的关键是建立一含筛选基因的重组载体,并有效地把它转入细胞核内．基因打靶命中的细胞可稳定遗传．基因打靶在改造生物品种,一些复杂生命现象（如发育的分子机制等）及临床理论研究均有广阔的前景．     

Factors affecting the efficiency of introducing precise genetic changes in ES cells by homologous recombination: tag-and-exchange versus the Cre-loxp system

The introduction of genetic modifications in specific genes by homologous recombination provides a powerful tool for elucidation of structure-function relationships of proteins of biological interest. Presently, there are several alternative methods of homologous recombination that permit the introduction of small genetic modifications in specific loci. Two of the most widely used methods are the tag-and-exchange, based on the use of positive--negative selection markers, and the Cre-loxP system, based on the use of a site-specific recombinase. The efficiency of detection of targeting events at different loci using the two systems was compared. Additionally, we analysed how the distance between two gene markers placed within the region of homology of a targeting vector affects the rate at which both markers are introduced into the locus during the homologous recombination event. Our results indicate that the method based on the use of positive--negative selection markers was les s efficient than the Cre-loxP based system, irrespective of locus or type of positive--negative selection. It was also determined that as the distance between the selectable marker and the genetic modification being introduced increases, there is a progressive reduction in the efficiency of detecting events with the desired genetic modification     

Non-recombinant background in gene targeting: illegitimate recombination between a hpt gene and a defective 5′ deleted nptII gene can restore a Kmr phenotype in tobacco

Previously we have demonstrated gene targeting in plants after Agrobacterium-mediated transformation. In these initial experiments a transgenic tobacco line 104 containing a T-DNA insertion with a defective neomycin phosphotransferase (nptII) gene was transformed with a repair construct containing an otherwise defective nptII gene. Homologous recombination between the chromosomally located target and the incoming complementary defective nptII construct generated an intact nptII gene and led to a kanamycin-resistant (Km^r) phenotype. The gene targeting frequency was 1×10^–5. In order to compare direct gene transfer and Agrobacterium-mediated transformation with respect to gene targeting we transformed the same transgenic tobacco line 104 via electroporation. A total of 1.35×10⁸ protoplasts were transformed with the repair construct. Out of nearly 221 000 transformed cells 477 Km^r calli were selected. Screening the Km^r calli via PCR for recombination events revealed that in none of these calli gene targeting had occurred. To establish the origin of the high number of Km^r calli in which gene targeting had not occurred we analysed plants regenerated from 24 Km^r calli via PCR and sequence analysis. This revealed that in 21 out of 24 plants analysed the 5-deleted nptII gene was fused to the hygromycin phosphotransferase (hpt) gene that was also present on the repair construct. Sequence analysis of 7 hpt/nptII gene fusions showed that they all contained a continuous open reading frame. The absence of significant homology at the fusion site indicated that fusion occurred via a process of illegitimate recombination. Therefore, illegitimate recombination between an introduced defective gene and another gene present on the repair construct or the chromosome has to be taken into account as a standard byproduct in gene targeting experiments.     

谷氨酸棒杆菌基因编辑的研究进展

谷氨酸棒杆菌是生产氨基酸、有机酸等的重要菌株,广泛应用于食品、医药领域。利用基因编辑技术对谷氨酸棒杆菌进行基因功能研究,在提高目的产物产量、发现新的基因功能等方面有重要意义。近年来,基因编辑技术发展日新月异,从基于同源重组的传统基因编辑技术到以人工核酸酶介导的基因编辑均在谷氨酸棒杆菌中得到合理应用。其中,CRISPR技术以其快速、简便、编辑效率高等优点成为现阶段研究者用于改造谷氨酸棒杆菌的主要技术,但是更为简单、高效的编辑手段依旧需要进一步研究开发,以获得优良菌株应用于工业生产中。