Modeling bioaffinity-based targeted delivery of antimicrobials to Escherichia coli biofilms using yeast microparticles. Part I: Model development and numerical simulation

Biofilms are potential reservoirs for pathogenic microbes leading to a significant challenge for food safety, ecosystems, and human health. Various micro-and nanoparticles have been experimentally evaluated to improve biofilm inactivation by targeted delivery of antimicrobials. However, the role of transport processes and reaction kinetics of these delivery systems are not well understood. In this study, a mechanistic modeling approach was developed to understand the targeted delivery of chlorine to an Escherichia coli biofilm using a novel bioaffinity-based yeast microparticle. Biofilm inactivation by this delivery system was numerically simulated as a combination of reaction kinetics and transport phenomena. Simulation results demonstrate that the targeted delivery system achieved 7 log reduction within 16.2 min, while the equivalent level of conventional free chlorine achieved only 3.6 log reduction for the same treatment time. These numerical results matched the experimental observations in our previous study. This study illustrates the potential of a mechanistic modeling approach to improve fundamental understanding and guide the design of targeted inactivation of biofilms using biobased particles.     

Biofouling control in water by various UVC wavelengths and doses

UV light irradiation is being increasingly applied as a primary process for water disinfection, effectively used for inactivation of suspended (planktonic) cells. In this study, the use of UV irradiation was evaluated as a pretreatment strategy to control biofouling. The objective of this research was to elucidate the relative effectiveness of various targeted UV wavelengths and a polychromatic spectrum on bacterial inactivation and biofilm control. In a model system using Pseudomonas aeruginosa, the inactivation spectra corresponded to the DNA absorption spectra for all wavelengths between 220 and 280 nm, while wavelengths between 254 nm and 270 nm were the most effective for bacterial inactivation. Similar wavelengths of 254-260-270 nm were also more effective for biofilm control in most cases than targeted 239 and 280 nm. In addition, the prevention of biofilm formation by P. aeruginosa with a full polychromatic lamp was UV dose-dependent. It appears that biofilm control is improved when larger UV doses are given, while higher levels of inactivation are obtained when using a full polychromatic MP lamp. However, no significant differences were found between biofilms produced by bacteria that survived UV irradiation and biofilms produced by control bacteria at the same microbial counts. Moreover, the experiments showed that biofilm prevention depends on the post-treatment incubation time and nutrient availability, in addition to targeted wavelengths, UV spectrum and UV dose.     

Encapsulation in Polymeric Microparticles Improves Daptomycin Activity Against Mature Staphylococci Biofilms—a Thermal and Imaging Study

Eradication of Gram-positive biofilms is a critical aspect in implant-associated infection treatment. Although antibiotic-containing particulate carriers may be a promising strategy for overcoming biofilm tolerance, the assessment of their interaction with biofilms has not been fully explored. In the present work, the antibiofilm activity of daptomycin- and vancomycin-loaded poly(methyl methacrylate) (PMMA) and PMMA-Eudragit RL 100 (EUD) microparticles against methicillin-resistant Staphylococcus aureus (MRSA) and polysaccharide intercellular adhesin-positive S. epidermidis biofilms was investigated using isothermal microcalorimetry (IMC) and fluorescence in situ hybridization (FISH). The minimal biofilm inhibitory concentrations (MBIC) of MRSA biofilms, as determined by IMC, were 5 and 20 mg/mL for daptomycin- and vancomycin-loaded PMMA microparticles, respectively. S. epidermidis biofilms were less susceptible, with a MBIC of 20 mg/mL for daptomycin-loaded PMMA microparticles. Vancomycin-loaded microparticles were ineffective. Adding EUD to the formulation caused a 4- and 16-fold reduction of the MBIC values of daptomycin-loaded microparticles for S. aureus and S. epidermidis, respectively. FISH corroborated the IMC results and provided additional insights on the antibiofilm effect of these particles. According to microscopic analysis, only daptomycin-loaded PMMA-EUD microparticles were causing a pronounced reduction in biofilm mass for both strains. Taken together, although IMC indicated that a biofilm inhibition was achieved, microscopy showed that the biofilm was not eradicated and still contained FISH-positive, presumably viable bacteria, thus indicating that combining the two techniques is essential to fully assess the effect of microparticles on staphylococcal biofilms.     

Biofouling control using microparticles carrying a biocide

This study presents a new technological approach to minimize the use of antimicrobial (AMB) agents and their deleterious effects, based on the principle of drug-delivery systems whereby the AMB chemicals are transported on microparticles. The efficacy of microparticles carrying the quaternary ammonium compound (QAC), benzyldimethyldodecyl ammonium chloride (BDMDAC), was assessed against Pseudomonas fluorescens in both the planktonic and the biofilm state. The microparticles were prepared using a layer-by-layer (LBL) self-assembly technique. Oppositely charged molecules of polyethyleneimine (PEI), sodium polystyrene sulfonate (PSS), and BDMDAC were assembled on polystyrene (PS) cores. BDMDAC-coated particles were observed by CryoSEM and their composition analyzed by X-ray microanalysis. Zeta potential measurements indicated that changes in surface charge were compatible with a BDMDAC/particle interaction. This biocidal carrier structure had significant stability, verified by the release of only 15% of the BDMDAC when immersed in water for 18 months. Biocidal carrier activity was evaluated by determining the survival ratio of P. fluorescens planktonic and biofilm cells after different exposure periods to BDMDAC-coated particles. Tests with biofilm cells were also performed with the free QAC. An efficient AMB effect (minimum bactericidal concentration) against suspended cells was found for a concentration of 9.2 mg l^?1 of BDMDAC on coated particles after incubation for 30 min and 6.5 mg l^?1 of BDMDAC on coated particles after 60 min. Exposure of biofilms to PS-PEI/PSS/BDMDAC (0.87 mg l^?1) resulted in a decrease in viability of 60.5% and 66.5% of the total biofilm population for 30 and 60 min exposure times, respectively. Exposure for 60 min to 6.33 mg l^?1 and 11.75 mg l^?1 of BDMDAC in PS-PEI/PSS/BDMDAC particles promoted inactivation of 80.6% and 87.2% of the total population, respectively. The AMB effects obtained with the application of free BDMDAC were statistically similar to those promoted by the application of BDMDAC coated particles. The overall results indicate that this novel AMB strategy has potential for the control of microbial growth of planktonic cells and biofouling. Moreover, the technique allows the reuse of AMB molecules and consequently reduces the environmental risks associated with excessive use of AMB agents, thereby providing real benefits to public health.     

Escherichia coli biofilm: development and therapeutic strategies

Escherichia coli biofilm consists of a bacterial colony embedded in a matrix of extracellular polymeric substances (EPS) which protects the microbes from adverse environmental conditions and results in infection. Besides being the major causative agent for recurrent urinary tract infections, E. coli biofilm is also responsible for indwelling medical device‐related infectivity. The cell‐to‐cell communication within the biofilm occurs due to quorum sensors that can modulate the key biochemical players enabling the bacteria to proliferate and intensify the resultant infections. The diversity in structural components of biofilm gets compounded due to the development of antibiotic resistance, hampering its eradication. Conventionally used antimicrobial agents have a restricted range of cellular targets and limited efficacy on biofilms. This emphasizes the need to explore the alternate therapeuticals like anti‐adhesion compounds, phytochemicals, nanomaterials for effective drug delivery to restrict the growth of biofilm. The current review focuses on various aspects of E. coli biofilm development and the possible therapeutic approaches for prevention and treatment of biofilm‐related infections.     

The influence of biofilm structure and total interaction energy on Escherichia coli retention by Pseudomonas aeruginosa biofilm

The retention of a surrogate pathogenic bacterium, Escherichia coli^T , in Pseudomonas aeruginosa biofilms (with various EPS excreting capacities) was investigated using a laboratory flow cell system. The structural characteristics of the biofilm, as well as the quantity of E. coli^T retained in the biofilm, were assessed using confocal laser scanning microscopy coupled with image analysis. In addition, the total interaction energy between E. coli^T and the P. aeruginosa biofilm was computed with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, which provided an additional context to explain the pathogen interaction in aquatic biofilms. The correlations between the quantity of detained E. coli^T cells and the structural characteristics of the biofilm were analysed and the results indicated that the heterogeneity of the biofilm could create a quiescent zone leading to temporary retention of E. coli^T within the biofilm. Overall, this study provided insights toward understanding the retention of pathogenic bacteria in environmental biofilms.     

Combined application of bacterial predation and carbon dioxide aerosols to effectively remove biofilms

This study evaluated predation with Bdellovibrio bacteriovorous and CO₂ aerosol spraying to remove fluorescent Escherichia coli biofilms from silicon chips. Initial tests found that 7.5×10⁵ viable E. coli cells were dispersed into the surrounding environment during aerosol treatment. The total number dispersed per test decreased to only 16 for predated biofilms. This is nearly 50,000-fold lower compared to untreated chips and 1000-fold lower compared to chips soaked in HEPES buffer only. Both scanning electron microscopy (SEM) and fluorescent microscopy analyses confirmed that predation alone did not completely eradicate the biofilm population. When used in conjunction with CO₂ aerosols, however, no fluorescent signals remained and the SEM pictures showed a pristine surface devoid of bacteria. Consequently, this study demonstrates these two methods can be used with each other to significantly remove biofilms from surfaces while also significantly reducing the likelihood of human exposure to potential pathogens during their removal.     

Fluorescent silica particles for monitoring oxygen levels in three-dimensional heterogeneous cellular structures

Bacterial biofilms are a major obstacle challenging the development of more effective therapies to treat implant infections. Oxygen availability to bacterial cells has been implicated in biofilm formation and planktonic cell detachment; however, there are insufficient tools available to measure oxygen concentrations within complex three‐dimensional structures with ～1 µm resolution. Such measurements may complement measures of biofilm structure and cell activity to provide a more comprehensive understanding of biofilm biology. Thus, we developed oxygen‐sensing microparticles specifically designed to characterize oxygen transport through the volume of bacterial biofilms. The Stöber method was used to synthesize monodisperse silica microparticles of approximately the same size as a bacterium (～1 µm). Two fluorophores, oxygen‐sensitive Ru(Ph₂phen₃)Cl₂, and the reference fluorophore Nile blue chloride were immobilized on the surface of the particles. We demonstrate application of the microparticles toward measuring the oxygen concentration profiles within a live Staphylococcus aureus biofilm. Biotechnol. Bioeng. 2012; 109: 2663–2670. © 2012 Wiley Periodicals, Inc.     

Biofouling on polymeric heat exchanger surfaces with E. coli and native biofilms

The biofouling affinity of different polymeric surfaces (polypropylene, polysulfone, polyethylene terephthalate, and polyether ether ketone) in comparison to stainless steel (SS) was studied for the model bacterium Escherichia coli K12 DSM 498 and native biofilms originating from Rhine water. The biofilm mass deposited on the polymer surfaces was minimized by several magnitudes compared to SS. The cell count and the accumulated biomass of E. coli on the polymer surfaces showed an opposing linear trend. The promising low biofilm formation on the polymers is attributed to the combination of inherent surface properties (roughness, surface energy and hydrophobicity) when compared to SS. The fouling characteristics of E. coli biofilms show good conformity with the more complex native biofilms investigated. The results can be utilized for the development of new polymer heat exchangers when using untreated river water as coolant or for other processes needing antifouling materials.     

Biofilm formation and toxin production provide a fitness advantage in mixed colonies of environmental yeast isolates

Microbes can engage in social interactions ranging from cooperation to warfare. Biofilms are structured, cooperative microbial communities. Like all cooperative communities, they are susceptible to invasion by selfish individuals who benefit without contributing. However, biofilms are pervasive and ancient, representing the first fossilized life. One hypothesis for the stability of biofilms is spatial structure: Segregated patches of related cooperative cells are able to outcompete unrelated cells. These dynamics have been explored computationally and in bacteria; however, their relevance to eukaryotic microbes remains an open question. The complexity of eukaryotic cell signaling and communication suggests the possibility of different social dynamics. Using the tractable model yeast, Saccharomyces cerevisiae, which can form biofilms, we investigate the interactions of environmental isolates with different social phenotypes. We find that biofilm strains spatially exclude nonbiofilm strains and that biofilm spatial structure confers a consistent and robust fitness advantage in direct competition. Furthermore, biofilms may protect against killer toxin, a warfare phenotype. During biofilm formation, cells are susceptible to toxin from nearby competitors; however, increased spatial use may provide an escape from toxin producers. Our results suggest that yeast biofilms represent a competitive strategy and that principles elucidated for the evolution and stability of bacterial biofilms may apply to more complex eukaryotes.     

Motility influences biofilm architecture in Escherichia coli

Eight Escherichia coli strains were studied in minimal medium with a continuous flow system using confocal microscopy. K12 wild-type strains ATCC 25404 and MG1655 formed the best biofilms (∼43 μm thick, 21 to 34% surface coverage). JM109, DH5α, and MG1655 motA formed intermediate biofilms (∼13 μm thick, 41 to 58% surface coverage). BW25113, MG1655 qseB, and MG1655 fliA had poor biofilms (surface coverage less than 5%). The best biofilm-formers, ATCC 25404 and MG1655, displayed the highest motility, whereas the worst biofilm former, BW25113, was motility-impaired. The differences in motility were due to differences in expression of the motility loci qseB, flhD, fliA, fliC, and motA (e.g., qseB expression in MG1655 was 139-fold higher than BW25113 and 209-fold higher than JM109). Motility affected the biofilm architecture as those strains which had poor motility (E. coli JM109, E. coli MG1655 motA, and DH5α) formed flatter microcolonies compared with MG1655 and ATCC 25404, which had more dramatic vertical structures as a result of their enhanced motility. The presence of flagella was also found to be important as qseB and fliA mutants (which lack flagella) had less biofilm than the isogenic paralyzed motA strain (threefold less thickness and 15-fold less surface coverage).     

The specific effect of gallic acid on Escherichia coli biofilm formation by regulating pgaABCD genes expression

Escherichia coli (E. coli) is associated with an array of health-threatening contaminations, some of which are related to biofilm states. The pgaABCD-encoded poly-beta-1,6-N-acetyl-D-glucosamine (PGA) polymer plays an important role in biofilm formation. This study was conducted to determine the inhibitory effect of gallic acid (GA) against E. coli biofilm formation. Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) values of GA against planktonic E. coli were 0.5 and 4 mg/mL, and minimal biofilm inhibitory concentration and minimal biofilm eradication concentration values of GA against E. coli in biofilms were 2 and 8 mg/mL, respectively. Quantitative crystal violet staining of biofilms and ESEM images clearly indicate that GA effectively, dose-dependently inhibited biofilm formation. CFU counting and confocal laser scanning microscopy measurements showed that GA significantly reduced viable bacteria in the biofilm. The contents of polysaccharide slime, protein, and DNA in the E. coli biofilm also decreased. qRT-PCR data showed that at the sub-MIC level of GA (0.25 mg/mL) and expression of pgaABC genes was downregulated, while pgaD gene expression was upregulated. The sub-MBC level of GA (2 mg/mL) significantly suppressed the pgaABCD genes. Our results altogether demonstrate that GA inhibited viable bacteria and E. coli biofilm formation, marking a novel approach to the prevention and treatment of biofilm-related infections in the food industry.

     

Microbial Exopolymers Link Predator and Prey in a Model Yeast Biofilm System

Protistan grazing on biofilms is potentially an important conduit enabling energy flow between microbial trophic levels. Contrary to the widely held assumption that protistan feeding primarily involves ingestion of biofilm cells, with negative consequences for the biofilm, this study demonstrated preferential grazing on the noncellular biofilm matrix by a ciliate, with selective ingestion of yeast and bacterial cells of planktonic origin over attached and biofilm-derived planktonic cells. Introducing a ciliate to two biofilm-forming Cryptococcus species, as well as two bacterial species in a model biofilm system, fluorescent probes were applied to determine ingestion of cellular and noncellular biofilm fractions. Fluoromicroscopy, as well as photometric quantification, confirmed that protistan grazing enhanced yeast biofilm metabolism, and an increase in biofilm biomass and viability. We propose that the extracellular polymeric matrix of biofilms may act as an interface regulating interaction between predator and prey, while serving as source of nutrients and energy for protists.     

Modulation of <Emphasis Type="Italic">Escherichia coli</Emphasis> biofilm growth by cell-free spent cultures from lactobacilli

E. coli biofilms cause serious problems in medical practice by contaminating surfaces and indwelling catheters. Due to the rapid development of antibiotic resistance, alternative approaches to biofilm suppression are needed. This study addresses whether products released by antagonistic bacteria — Lactobacillus isolates from vaginal and dairy-product samples could be useful for controlling E. coli biofilms. The effects of diluted cell-free supernatants (CFS) from late-exponential Lactobacillus cultures on the growth and biofilm production of Escherichia coli were tested. Most of the CFS applied as 10⁻² had no impact on bacterial growth, biofilm development however was influenced even by 10⁻⁴ of CFS. Initial screening by crystal violet assay showed that biofilm modulation varied between different CFS and E. coli combinations from inhibition to activation; however three of the tested CFS showed consistency in biofilm suppression. This was not due to antibacterial activity since Live/Dead fluorescence labeling showed insignificant differences in the amount of dead cells in control and treated samples. Some E. coli strain-specific mechanisms of response to the three CFS included reduction in hydrophobicity and motility. Released exoploysaccharides isolated from the three CFS stimulated sessile growth, but proteinase K reduced their inhibitory activities implying participation of protein or peptide biofilm suppression factor(s).     

Interaction between atypical microorganisms and E. coli in catheter-associated urinary tract biofilms

Most biofilms involved in catheter-associated urinary tract infections (CAUTIs) are polymicrobial, with disease causing (eg Escherichia coli) and atypical microorganisms (eg Delftia tsuruhatensis) frequently inhabiting the same catheter. Nevertheless, there is a lack of knowledge about the role of atypical microorganisms. Here, single and dual-species biofilms consisting of E. coli and atypical bacteria (D. tsuruhatensis and Achromobacter xylosoxidans), were evaluated. All species were good biofilm producers (Log 5.84–7.25 CFU cm^?2 at 192?h) in artificial urine. The ability of atypical species to form a biofilm appeared to be hampered by the presence of E. coli. Additionally, when E. coli was added to a pre-formed biofilm of the atypical species, it seemed to take advantage of the first colonizers to accelerate adhesion, even when added at lower concentrations. The results suggest a greater ability of E. coli to form biofilms in conditions mimicking the CAUTIs, whatever the pre-existing microbiota and the inoculum concentration.     

Synthesis,Biological Evaluation and in Silico Study of N-(2- and 3-Pyridinyl)benzamide Derivatives as Quorum Sensing Inhibitors against Pseudomonas aeruginosa

The effectiveness of treating bacterial infections is seriously threatened by the emergence of bacterial resistance to chemical treatment. Growth of microbes in biofilm is one of the main causes of resistance to antimicrobial drugs. Quorum sensing (QS) inhibition, which targets the QS signalling system by obstructing cell-cell communication, was developed as an alternative treatment by creating innovative anti-biofilm drugs. Therefore, the goal of this study is to develop novel antimicrobial drugs that are effective against Pseudomonas aeruginosa by inhibiting QS and acting as anti-biofilm agents. In this study, N-(2- and 3-pyridinyl)benzamide derivatives were selected to design and syntheses. Antibiofilm activity was revealed by all the synthesized compounds and the biofilm was visibly impaired, and the OD_595nm readings of solubilized biofilm cells presented a momentous difference between the treated and untreated biofilms. The best anti-QS zone was observed for compound 5d and found to be 4.96 mm. Through in silico research, the physicochemical characteristics and binding manner of these produced compounds were examined. For the purpose of understanding the stability of the protein and ligand complex, molecular dynamic simulation was also carried out. The overall findings showed that N-(2- and 3-pyridinyl)benzamide derivatives could be the key to creating effective newer anti-quorum sensing drugs that are effective against different bacteria.     

In situ monitoring of biofilm formations ofEscherichia coli andPseudomonas putida by use of lux and GFP reporters

A plasmid vector containing two reporter genes,mer-lux andlac-GFP, was transformed to bothEscherichia coli andPseudomonas putida. Their cellular activities and biofilm characteristics were investigated in flow-cell units by measuring bioluminescent lights and fluorescent levels of GFP. Bioluminescence was effective to monitor temporal cell activities, whereas fluorescent level of GFP was useful to indicate the overall cell activities during biofilm development. The light production rates ofE. coli andP. putida cultures were dependent upon concentrations of HgCl₂. Mercury molecules entrapped inP. putida biofilms were hardly washed out in comparison with those inE. coli biofilms, indicating thatP. putida biofilms may have higher affinity to mercury molecules thanE. coli biofilms. It was observed thatP. putida expressed GFP cDNA in biofilms but not in liquid cultures. This may indicate that the genetic mechanisms ofP. putida were favorably altered in biofilm conditions to make a foreign gene expression possible.     

Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces

Well-established biofilms formed by Streptococcus mutans via exopolysaccharide matrix synthesis are firmly attached to tooth surfaces. Enhanced understanding of the physical properties of mature biofilms may lead to improved approaches to detaching or disassembling these highly organized and adhesive structures. Here, the mechanical stability of S. mutans biofilms was investigated by determining their ability to withstand measured applications of shear stress using a custom-built device. The data show that the initial biofilm bulk (~ 50% biomass) was removed after exposure to 0.184 and 0.449 N m^?2 for 67 and 115 h old biofilms. However, removal of the remaining biofilm close to the surface was significantly reduced (vs initial bulk removal) even when shear forces were increased 10-fold. Treatment of biofilms with exopolysaccharide-digesting dextranase substantially compromised their mechanical stability and rigidity, resulting in bulk removal at a shear stress as low as 0.027 N m^?2 and > a two-fold reduction in the storage modulus (G′). The data reveal how incremental increases in shear stress cause distinctive patterns of biofilm detachment, while demonstrating that the exopolysaccharide matrix modulates the resistance of biofilms to mechanical clearance.