Studies on synthetic chromatins containing poly(dA-dT)·poly(dA-dT) and poly(dG-dC)·poly(dG-dC)

Core histones, (H2A,H2B,H3,H4)₂, were reconstituted with the synthethic polynucleotides poly(dA-dT)·poly(dA-dT) and poly(dG-dC)·poly(dG-dC) to yield synthetic chromatins containing 200 basepairs per octamer. These synthetic chromatins displayed a 36% decrease in the circular dichroism (CD) peak ellipticity from the value of the polynucleotide free in solution; the poly(dA-dT)·poly(dA-dT)/chromatin showed an increase in the complexity of the thermal denaturation profile compared to that of the polynucleotide. Both the temperature of maximum $\text{d}\text{h}\text{d}\text{T}$ for each transition (T_m) and the relative amount of poly(dA-dT)·poly(dA-dT) in the synthetic chromatin melting in each of the four thermal transitions is a function of the ionic strength over the 0–5 mM sodium phosphate range (0.25 mM EDTA, pH 7.0); a shift of material toward higher melting transitions was observed with increasing ionic strength. The CD peak ellipticity value for both synthetic chromatins was ionic strength-independent over the 0–5 mM sodium phosphate range. These results are in contrast to those observed with $\text{H}\text{1}\text{H}\text{5}$ stripped chicken erythrocyte chromatin (Fulmer, A. and Fasman, G.D. (1979) Biopolymers 18, 2875–2891), where an ionic strength dependence was found. Differences in the CD spectra between poly(dA-dT)·poly(dA-dT)/chromatin, poly(dG-dC)·poly(dG-dC)/chromatin and $\text{H}\text{1}\text{H}\text{5}$ stripped chicken erythrocyte chromatin suggest subtle differences in assembly. Finally, the temperature dependence of the CD spectra of poly(dA-dT)·poly(dA-dT)-containing synthetic chromatin, which is similar to that for the polynucleotide, suggests the core histone bound polynucleotide has a large degree of conformational flexibility allowing it to undergo the premelt transition.     

Effect of the alkaline cations on the stability of the model polynucleotide poly(dG-dC)·poly(dG-dC)

When the model polynucleotide poly(dG-dC)?poly(dG-dC) [polyGC] is titrated with a strong acid (HCl) in unbuffered aqueous solutions containing the chlorides of the alkali metals in the concentration range 0.010?M-0.600?M, two transitions in the absorbance vs. pH plots are evidenced, characterized by the constants pK(a(?)) and pK(a(?)). The limiting values at infinite saline concentrations of these two constants, namely pK(∞)(a(?)) and pK(∞)(a(?)) obtained making use of the "one site saturation constant" equation or, in turn, of the double logarithmic plot: pK(a) vs. log([salt]?1), exhibit a clear dependence on the nature of the cations. The effects of the different alkali cations on the pK(∞)(a) values follow the Hofmeister series. In fact, the pK(∞)(a(?)) and the pK(∞)(a(?)) values are smaller for Li+ and Na+ than for Rb+ and Cs+, with K+ at the border between the two, showing that the transitions require higher concentrations of protons to occur in the presence of high concentrations of the cosmotropic ions.     

Interpretation of DNA vibration modes: I-The guanosine and cytidine residues involved in poly(dG-dC)·poly(dG-dC) and d(CG)3·d(CG)3

Abstract

A normal coordinate analysis has been carried out on guanosine and cytidine residues appearing in oligo and polynucleotides by using a simplified valence force field that allows the vibrational spectra of 5′-dGMP and 2′-deoxycytidine molecules to be reproduced. The role of both C2′-endo and C3′-endo conformations on sugar pucker, as well as that of glycosidic torsion angle (χ), on several characteristic vibration modes of these residues have been studied. The present calculations based on a non-redundant set of internal coordinates preserving the harmonic approximation of the potential field, allows us to explain quite satisfactorily the modifications of the vibrational spectra in the 1550-1250 cm^?1 and 785-500 cm^?1 regions, when the right → left-handed conformational transition occurs.     

Structures for the polynucleotide complexes poly(dA) · poly(dT) and poly(dT) · poly(dA) · poly(dT)

X-ray diffraction analyses of fibers of polydeoxyadenylic acid · polydeoxythymidylic acid show that this molecule exists as a 10-fold double-helix with axial rise per nucleotide $\text{h = 3.24}\text{to}\text{3.29}\text{A}\text{?}$. The structure is very similar to B-DNA ($\text{h = 3.37}\text{A}\text{?}$) in having C3-exo furanose rings and base-pairs positioned centrally on the helix axis, but distinctive enough to have two packing modes, neither of which has been observed for B-DNA. Although the triple-stranded poly(dT) · poly(dA) · poly(dT) also has a large value of h(3.26 Å), each of the chains is a 12-fold helix of the A-genus with C3-endo furanose rings and bases displaced several Angstrom units from the helix axis.     

Interaction between double stranded poly(dA-dT)·poly (dA-dT) and lucanthone

270 MHz ¹H NMR and theoretical studies indicate that the drug lucanthone forms intercalated complexes with the synthetic DNA poly(dA-dT)·poly(dA-dT). In the intercalated complex the long axis of the drug is perpendicular to the helix axis and parallel to the base pair axis, i.e., the long axis is perpendicular to the dyad axis.     

Interaction of 9-O-(ω-amino) alkyl ether berberine analogs with poly(dT)·poly(dA)*poly(dT) triplex and poly(dA)·poly(dT) duplex: a comparative study

Isoquinoline alkaloids and their analogs represent an important class of molecules for their broad range of clinical and pharmacological utility. These compounds are of current interest owing to their low toxicity and excellent chemo preventive properties. These alkaloids can play important role in stabilising the nucleic acid triple helices. The present study has focused on the interaction of five 9-O-(ω-amino) alkyl ether berberine analogs with the DNA triplex poly(dT)·poly(dA)*poly(dT) and the parent duplex poly(dA)·poly(dT) studied using various biophysical techniques. Scatchard analysis of the spectral data indicated that the analogs bind both to the duplex and triplex in a non-cooperative manner in contrast to the cooperative binding of berberine to the DNA triplex. Strong intercalative binding to the DNA triplex structure was revealed from ferrocyanide quenching, fluorescence polarization and viscosity results. Thermal melting studies demonstrated higher stabilization of the Hoogsteen base paired third strand of the DNA triplex compared to the Watson–Crick strand. Circular dichroism studies suggested a stronger perturbation of the DNA triplex conformation by the alkaloid analogs compared to the duplex. The binding was entropy-driven in each case and the entropy contribution to free energy increased as the length of the alkyl side chain increased. The analogs exhibited stronger binding affinity to the triple helical structure compared to the parent double helical structure.     

Bioreducible block copolymers based on poly(ethylene glycol) and poly(γ-benzyl L-glutamate) for intracellular delivery of camptothecin

Poly(ethylene glycol)-b-poly(γ-benzyl L-glutamate)s bearing the disulfide bond (PEG-SS-PBLGs), which is specifically cleavable in intracellular compartments, were prepared via a facile synthetic route as a potential carrier of camptothecin (CPT). Diblock copolymers with different lengths of PBLG were synthesized by ring-opening polymerization of benzyl glutamate N-carboxy anhydride in the presence of a PEG macroinitiator (PEG-SS-NH(2)). Owing to their amphiphilic nature, the copolymers formed spherical micelles in an aqueous condition, and their particle sizes (20-125 nm in diameter) were dependent on the block length of PBLG. Critical micelle concentrations of the copolymers were in the range 0.005-0.065 mg/mL, which decreased as the block length of PBLG increased. CPT, chosen as a model anticancer drug, was effectively encapsulated up to 12 wt % into the hydrophobic core of the micelles by the solvent casting method. It was demonstrated by the in vitro optical imaging technique that the fluorescence signal of doxorubicin, quenched in the PEG-SS-PBLG micelles, was highly recovered in the presence of glutathione (GSH), a tripeptide reducing disulfide bonds in the cytoplasm. The micelles released CPT completely within 20 h under 10 mM GSH, whereas only 40% of CPT was released from the micelles in the absence of GSH. From the in vitro cytotoxicity test, it was found that CPT-loaded PEG-SS-PBLG micelles showed higher toxicity to SCC7 cancer cells than CPT-loaded PEG-b-PBLG micelles without the disulfide bond. Microscopic observation demonstrated that the disulfide-containing micelle could effectively deliver the drug into nuclei of SCC7 cells. These results suggest that PEG-SS-PBLG diblock copolymer is a promising carrier for intracellular delivery of CPT.     

一种制备poly(Ⅰ)·poly(C)-滤纸的新方法

poly(1)·poly(C)-滤纸是一种亲和材料,可以用来吸附与双链核酸有亲和力的酶或蛋白。本文介绍用对-β硫酸酯乙砜基苯胺为活化剂制备poly(I)·poly(C)-滤纸的方法。poly(I)·poly(C)的结合容量为10—35μg/cm~2,用来吸附兔网织红细胞裂解液中2’-5’A合成酶效果良好。在一定范围内,酶活与被吸附裂解液量呈线性关系,说明可以用来定量检测未知样品中与poly(I)·poly(C)有亲和力的酶。poly(I)·poly(C)-滤纸在-20℃保存四个月亲和能力不变。本方法与文献报道的方法相比,操作简便试剂易得。     

The nature of different influence of Cd<Superscript>2+</Superscript> ions on the conformational equilibrium of triple-stranded polyribonucleotides poly(U)•poly(A)•poly(U) and poly(I)•poly(A)•poly(I) in aqueous solutions

The influence of Cd²⁺ ions on the conformational equilibrium of single-stranded (poly(U), poly(A), poly(I)) and triple-stranded polyribonucleotides (A2I, A2U) in aqueous solutions (0.1 M Na⁺ pH 7) has been investigated using difference UV spectroscopy and thermal denaturation. Analysis of the shape and intensity of the DUV spectra of poly(A), poly(I), and A2I has revealed the presence of two types of complex formed as a result of (i) interaction between Cd²⁺ and the N7 atoms of purines, producing macrochelates; and (ii) binding of Cd²⁺ to the N1 atoms of poly(A) and poly(I). Since Cd²⁺ ions are not bound to heteroatoms of the bases in A2U, the conformation of the structure remains stable up to 0.02 M Cd²⁺. There is a critical Cd²⁺ concentration (～1.5?10^?4 M) above which A2I assumes a new helical conformation with lower thermal stability. It is supposed that, upon the formation of the “metallized” A2I triplex, the Cd²⁺ ions are located inside the triple helix and form bridges between the hypoxanthine and adenine of the homopolynucleotide strands.     

Fractionation of functional polystyrenes,poly(ethylene oxide)s and poly(styrene)–b–poly(ethylene oxide) by liquid chromatography at the exclusion–adsorption transition point

The paper reports the fractionation of functional polystyrenes (PSs) and poly(ethylene oxide)s (PEOs) as well as their block copolymers, by liquid chromatography at the exclusion adsorption transition point (EATP–LC), also called “critical conditions” mode. In this specific elution mode (EATP–LC), the fractionation is only governed by the nature and the number of functions attached to the polymer backbone, independent of the molar mass distribution of the whole sample. Functional polystyrenes (α- and/or α,ω-alcohol-, acetal-, aldehyde- and acidic-PS) could be readily separated from non-functional polystyrenes under various chromatographic conditions. The technique also allowed the fractionation of poly(ethylene oxide)s and PS–PEO block copolymers. In the latter cases, moderately polar columns (grafted silica) and water-based polar eluents were required to obtain a satisfactory fractionation.     

Antifouling poly(β-peptoid)s

A new type of polymer highly resistant to nonspecific protein adsorption is reported. Poly(N-methyl-β-alanine) (PMeA) and poly(N-ethyl-β-alanine) (PEtA) synthesized via cobalt-catalyzed carbonylative polymerization of N-methylaziridine and N-ethylaziridine were end-functionalized with thiol groups and grafted onto Au surfaces. Protein adsorption was studied by the surface plasmon resonance (SPR) method. The amounts of representative single proteins adsorbed onto the PMeA- and PEtA-grafted surfaces were below the detection limit of SPR at the pg/mm(2) level. After exposure to full blood plasma and serum for 10 min, protein adsorption was at the level of ～ 100 pg/mm(2), similar to the level of protein adsorption on poly(ethylene glycol) surfaces subjected to identical conditions. These poly(β-peptoid)s therefore provide excellent protein resistance comparable to the best antifouling materials known to date. The strong proton-accepting ability when forming hydrogen bonds is suggested to be an important attribute for these poly(β-peptoid)s as well as other poly(tertiary amide)s as antifouling materials.     

Purification and propertes of poly(β-d-mannuronate) lyase from Azotobacter chroococcum

A bacterium, Azotobacter chroococcum 4A1M, isolated from a soil sample, produced an alginate-decomposing enzyme in the culture broth. The enzyme was purified to an electrophoretically homogeneous state. The purified enzyme showed maximum activity at pH 6.0 and 60°C;it was stable up to 60°C at pH 6.0 and activated by Ca²⁺ and inhibited strongly by Hg²⁺. The molecular mass of the enzyme was estimated to be 23 kDa by sodium dodecyl sulfate/polyacrylamide gel electrophoresis and 24 kDa by gel filtration. Therefore, the enzyme was considered to be monomeric. The NH₂-terminal amino acid sequence was determined to be H₂N-Ala-Ser-Ile-Ala-Ile-Thr-Asn-Pro-Gly-Phe. The enzyme reacted only on the polymannuronate block of alginic acid, and two main reaction products were obtained when short-chain polymannuronate was used as a substrate. The degrees of polymerization of the two products were three and two respectively.     

Reaction–diffusion wave model for self-assembled network formation of poly(dA)·poly(dT) DNA on mica and HOPG surfaces

Deoxyribonucleic acid (DNA) is a vital molecule for life since it contains genetic information. However, DNA has recently been reported to have unique properties that make it suitable for bionanoelectronic applications, such as the possibility of electrical conductivity and self-organisation. Self-assembled DNA network structures have been observed on several substrates, but the detailed self-assembly mechanism has yet to be determined. The present study investigates self-assembled structures of DNA both theoretically and experimentally. We developed a reaction–diffusion model and used it to investigate pattern formations observed by atomic force microscopy. The computational results qualitatively replicate the network patterns of DNA molecules based on a quantitative agreement with the surface size and timescale. The model can account for the effect of the DNA concentration on pattern formation. Furthermore, peculiar geometric patterns are simulated for mica and highly oriented pyrolytic graphite surfaces.     

The regulatory effect of citric acid on the co-production of poly(ε-lysine) and poly(l-diaminopropionic acid) in Streptomyces albulus PD-1

Streptomyces albulus PD-1 can co-produce antimicrobial homo-polymers poly(ε-lysine) (ε-PL) and poly(l-diaminopropionic acid) (PDAP). In this study, a novel feeding strategy of citric acid coupled with glucose-(NH₄)₂SO₄ feeding was employed to S. albulus PD-1. When the pH of the culture broth dropped to 4.0, the feeding solution was added continuously to maintain the concentrations of glucose and citric acid at 10 and 4 g L^?1, respectively. As a result, the final concentration of ε-PL increased from 21.7 to 29.7 g L^?1 and the final concentration of PDAP decreased from 4.8 to 3.2 g L^?1. Assays on intracellular nucleotide levels and key enzyme activities were performed to elucidate the underlying regulation mechanism. The addition of citric acid increased NADH/NAD⁺ ratio and decreased intracellular ATP level; meanwhile, the activities of pyruvate kinase, citrate synthase and isocitrate dehydrogenase decreased while aspartate aminotransferase activity increased. Therefore, we deduced that citric acid feeding resulted in metabolic flux redistribution at the node of phosphoenolpyruvate; the metabolic pathway from phosphoenolpyruvate directed into tricarboxylic acid cycle was weakened and thus PDAP production was inhibited. On the other hand, the metabolic pathway from phosphoenolpyruvate directed into oxaloacetate and l-aspartate was enhanced, thereby improving ε-PL production. This fermentation strategy may be potentially useful in ε-PL production because it can effectively inhibit the formation of by-products, such as PDAP.     

Binding properties of Ru(II) polypyridyl complexes with poly(U)·poly(A)*poly(U) triplex: the ancillary ligand effect on third-strand stabilization

The binding properties of [RuL₂(mip)]²⁺ {where L is 1,10-phenanthroline (phen) or 4,7-dimethyl-1,10-phenanthrollne (4,7-dmp) and mip is 2′-(3″,4″-methylenedioxyphenyl)imidazo[4′,5′-f][1,10]phenanthroline} with regard to the triplex RNA poly(U)·poly(A)*poly(U) were investigated using various biophysical techniques and quantum chemistry calculations. In comparison with [Ru(4,7-dmp)₂(mip)]²⁺, remarkably higher binding affinity of [Ru(phen)₂(mip)]²⁺ for the triplex RNA poly(U)·poly(A)*poly(U) was achieved by changing the ancillary ligands. The stabilization of the Hoogsteen-base-paired third strand was improved by about 10.9 °C by [Ru(phen)₂(mip)]²⁺ against 6.6 °C by [Ru(4,7-dmp)₂(mip)]²⁺. To the best of our knowledge, [Ru(phen)₂(mip)]²⁺ is the first metal complex able to raise the third-strand stabilization of poly(U)·poly(A)*poly(U) from 37.5 to 48.4 °C. The results reveal that the ancillary ligands have an important effect on third-strand stabilization of the triplex RNA poly(U)·poly(A)*poly(U) when metal complexes contain the same intercalative ligands.     

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.     

Photo-cross-linked biodegradable poly(ester anhydride) networks prepared from alkenylsuccinic anhydride functionalized poly(ε-caprolactone) precursors

Biodegradable poly(ester anhydride) networks based on linear and star-shaped poly(ε-caprolactone)-based precursors were synthesized with the aim of obtaining matrixes suitable for release of macromolecular active agents. The ring-opening polymerization yielded hydroxyl telechelic oligomers, which were end-functionalized with succinic anhydride or with alkenylsuccinic anhydrides containing 8, 12, or 18 carbons in their alkenyl chains. Before cross-linking, the acid-terminated oligomers were reacted with methacrylic anhydride to obtain methacrylated precursors containing labile anhydride bonds. The degrees of substitution for the acid functionalization and methacrylation were >93%. Cross-linking of the precursors was carried out with visible light at room temperature. Gel contents and cross-linking densities were higher for networks cross-linked from the star-shaped precursors than for networks prepared from the linear precursors. In in vitro erosion tests, the presence of the alkenyl chain slowed down the erosion rate. The networks exhibited characteristic surface erosion: the mass loss was linear, whereas the dimensions of the specimens decreased steadily. A macromolecular release study showed the release of the model compound to be linear and in proportion to the mass loss.     

同聚DNA分子poly(dA)·poly(dT)主链的振动位移

基于同聚DNA分子poly(dA).poly(dT)的螺旋对称性,利用晶格动力学方法,计算了DNA分子poly(dA).poly(dT)主链振动的本征矢,探讨了振动位移矢量和线二色光谱的关系。结果表明,对应着磷酸双氧的反对称振动谱线可以用于直接确定磷酸根的取向,精度小于1°。其它谱线必须通过对分子的简正分析来帮助确定分子的结构。     

Lipase-catalyzed synthesis of poly(ε-caprolactone) and characterization of its solid-state properties

Abstract

Ring-opening polymerization of ε-caprolactone has been successfully conducted using an immobilized form of Candida antarctica lipase B as catalyst. The effects of enzyme concentration, reaction medium, reaction temperature and time on monomer conversion and product molecular weight were investigated. Through optimization of reaction conditions, poly(ε-caprolactone) (PCL) was obtained with 99% monomer conversion and a number-average molecular weight (M_n) of 18870 g/mol. The reaction system was then scaled up, and PCL was synthesized in 78% isolated yield, with M_n and polydispersity index of 41540 g/mol and 1.69, respectively. The solid-state properties of this sample were systematically evaluated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM). The product PCL showed excellent thermal stability, with degradation of the main chain in the temperature range of 280–450°C. Remarkably, this high molecular weight PCL was a typical crystalline polymer with a high degree of crystallinity observed by DSC, WAXD and POM.     

Synthesis and solution behavior of poly(ε-caprolactone) grafted hydroxyethyl cellulose copolymers

Trimethylsilylated hydroxyethyl cellulose (TMSHEC) was synthesized by using hexamethyldisilazane (HMDS) as silylated agent. With the partial protection of hydroxyl groups of HEC by silylation, the novel poly(?-polycaprolactone) (PCL) grafted HEC (HEC-g-PCL) copolymers were successfully prepared by homogenous ring-opening graft polymerization and deprotection procedure. The structure of HEC-g-PCL copolymers was characterized by FTIR and 1H NMR. Fluorescence spectrum of HEC-g-PCL copolymer dilute solution indicated that copolymers could associate and form hydrophobic microdomains in aqueous solution. With the increasing of grafted PCL content, the critical association concentration (cac) of HEC-g-PCL copolymers decreased. The surface tension of HEC-g-PCL copolymers decreased dramatically with the increasing of the concentration and then approached to a plateau value when concentration was above the cac of HEC-g-PCL copolymers. The hydrodynamic radius of the aggregate of copolymer in dilute solution was found to increase with the increasing of the grafted PCL content. When the concentration of copolymer was above the cac, the zero-shear viscosity of the copolymer increased sharply and became much higher than that of HEC at the same concentration.